Blue Sea - Electrical

150 Amps Common BusBar 8-32 Screw terminal with cover The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Voltage Rating 300 Volts AC Maximum / 48 Volts DC maximum Base Material Reinforced Polycarbonate Studs Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal Continuous...

Compact fuses ideal for panel feeds, windlasses, and thrusters, tin-plated contacts for corrosion resistance

The Blue Sea Rotating Cable Caps feature a top that rotates 360 degrees to allow cable entry from any angle For batteries with integral marine wing nut posts Sold as a pair.

Simultaneously switches two isolated battery banks or combines battery banks to all loads •Make-before-break contact design allows switching between battery banks without power interruption •Ignition protected—safe for installation aboard gasoline powered boats •Case design allows surface or rear panel mounting

Switches a single battery to a single load group •Ignition protected—safe for installation aboard gasoline powered boats •Case design allows surface or rear panel mounting

Switches isolated battery banks to all loads or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installations with inboard gasoline and diesel engined powered boats. Case design allows surface or rear panel mounting

Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...

Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...

DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light c

DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light c

Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification Fuse blocks with covers include...

Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, stor

Features: Clear insulating cover with label recesses for accept Large Format Labels Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses Specifications: Cover Material Polycarbonate Base...