5511E Dual Circuit Plus Battery Switch
Simultaneously switches two isolated battery banks or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protectedsafe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting
9003E Single Circuit ON/OFF Battery Switch
Switches a single battery to a single load group Ignition protectedsafe for installation aboard gasoline powered boats Case design allows surface or rear panel mounting
Battery Box
2 Sizes available: Small - 310x230x250 Large - 430x220x250
Battery Changeover Switch
Required for boat electrical systems fed by two batteries. This robust plastic boat battery changeover switch enables you to switch over from the first battery to the second or to operate or charge both batteries simultaneously. The switch is suitable for 6V, 12V and 24V electrical systems. Maximum Load: 6V: 300A (constant) / 350A (peaking briefly).12V: 150A (constant) / 175A (peaking briefly).24V:...
Battery Isolator Switch
Basic battery isolation switch intended for isolating a single battery. Can also be used for controling high current devices such as winches, windlasses, capstans etc. Maximum Voltage: 24 Vdc Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc Maximum continuous current: 100Amps/140Amps @ 12Vdc Dimensions: 75mm x 60mm diameter Terminal Stud Diameter: 10mm
Blue Sea Systems e-Series Selector Battery Switch
Switches isolated battery banks to all loads or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installations with inboard gasoline and diesel engined powered boats. Case design allows surface or rear panel mounting
Mini Battery Switch
Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...
Mini Battery Switch (Key Version)
Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...
Spare red key for battery isolator
Spare red key for battery isolator
3 Amp Plug & Socket
3A chrome plug and socket with plastic cap.
5 Amp Plug & Socket
5A chrome plug and socket with plastic cap.
Cigar Lighter Plugs & Sockets
PLUG: Description: Black plastic housing with non-corrosive metal parts - nickel plated phosphor bronze. Solderless screw terminals, - brass screws. Cable restraint. The spring loaded contact tip is exceptionally wide to avoid sparking and heating. The sharp edges of the side spring - the negative carrier - help in holding this plug better connected in the universal Car Lighter Socket Weight: 22...
Dual USB Socket & 12V Adaptor
Plug into a 12V socket to give 2 x 12V sockets, and two USB ports
Multi Cigar Plug Outlet
The 12 volt 3 Way adaptor allows three 12 volt products to be powered through one cigar lighter socket. 2 metre lead Plugs into a lighter socket of a 12 V battery.
Standard Buccaneer Bulkhead Socket
Bulkhead sockets, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with Flex Cable Connector ?Screw Fixing Flange ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Supplied with sealing gasket and screw sealing grommets ?RoHS Compliant
Standard Buccaneer In-Line Flex Plug Connector
Flexible plug, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with In-Line Flex or Panel Mounting Versions ?Screw Locking Ring ?Pin or Socket Versions ?Leading Earth on 3 pole connectors ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Standard Cable Acceptance (2 to 9...
Standard Buccaneer In-Line Flex Socket Connector
In-line sockets,available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with Flex Cable Connector ?Pin or Socket Versions ?Leading Earth on 3 pole connectors ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Standard Cable Acceptance (2 to 9 pole) 6-8mm, ?RoHS Compliant
Standard Buccaneer Low Profile Socket
Low profile socket, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Screw Flange Fixing ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Mates with Flex Cable Connector ?Supplied with sealing gasket and screw sealing grommets ?RoHS Compliant
3 Gang Waterproof Switch Panel
Aluminium switch panel with 3 waterproof rocker switches (with LED)and built-in fuse holders. Supplied with spare labels. Size: W135xH90mm
6 Gang Waterproof Switch Panel
Aluminium switch panel with 6 waterproof rocker switches and built-in fuse holders. Supplied with spare labels. Size: W135xH190mm
Aluminum Battery Test Switch
Aluminium battery test panel made from stamped anodized aluminum with switch over to check the condition of up to 2 batteries Size: 64 x 83mm
Aluminum Battery Test Switch with Gauge and Horn Button
Black aluminium finish panel with 3 fused, illuminated switches and cigarette lighter plus push button horn switch. Panel rating: 12 volt, 37 amps total. Individual circuit 10 amps. Supplied with 1 x 3A fuse, 1 x 5A fuse, 1 x 10A fuse, and 1 x 15A fuse.
Aluminum Circuit Breaker Panel 6 Circuit
Supplied with: 2 - 3 amp, 2- 6 amp, 1 - 8 amp and 1 - 10 amp Thermal AC/DC Circuit Breakers. Panel rating: 12 volt 40 amps total. Individual circuit 10 amps maximum. Size: W115xH165mm
Aluminum Horizontal Switch Panel 6 Switch
Aluminium horizontal mounting switch panel with 4 illuminating rocker switches and built-in fuse holders. Panel rating: 12V, 37 amps total. Individual circuit 10 amps. Supplied with spare labels. Size: W165xH115mm
Aluminum Switch Panel with Gauge and Cigarette Lighter
Black aluminium finish panel with 3 fused, illuminated switches and cigarette lighter plus test meter for two batteries. Panel rating: 12 volt, 37 amps total. Individual circuit 10 amps. Supplied with 1 x 3A fuse, 1 x 5A fuse, 1 x 10A fuse, and 1 x 15A fuse.
Bakelite Switch Panels
Budget bakelite switch panel with stainless toggle switches and built-in fuse holders. Bakelite being a plastic material means there is no corrosion problems and although this panel is not waterproof it is ideal for the marine environment. Supplied with spare labels. Available in 3 or 6 way versions
Blue Sea Systems 4 Position, BelowDeck Circuit Breaker Panel
DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light c
Blue Sea Systems 6 Position, BelowDeck Circuit Breaker Panel
DURABLE Molded panel frame will stand up to UV and salt air EASY Low profile makes it easy to install in tight spaces SIMPLE Fast-on circuit breaker connectors make it quick to wire CONVENIENT Red “ON” indicating LEDs for safe operation in low light c
Blue Sea Systems ST Blade Fuse Block - 12 Circuits with Negative Bus and Cover
Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, storage for two spare fuses, and label recesses that accept Blue Sea Systems" Small Format Labels for circuit identification Fuse blocks with covers include...
Blue Sea Systems ST Blade Fuse Block - 6 Circuits with Negative Bus and Cover
Positive distribution bus with #10-32 stud Can be used for 24-hour circuits Models available with or without a cover Cover satisfies ABYC/USCG requirements for insulation, incorporates an easy to open push button latch providing easy access to fuses, stor
Push Button Switch
Horn/Starter switch for flush fitting. Flat-plug connection and waterproof cover. For instrument panels up to 4mm thick. Mounting aperture 22.3mm diameter. Short period load. 12.5 amp at 12V. 6.25 amp at 24V.
Sea-Dog Aluminium Vertical 4 Switch Panel
Stamped Anodized Aluminum
Panel rating: 12 volts, 37 amps total. Individual circuit 10 amps
Sea-Dog Aluminium Vertical 6 Switch Panel
Anodized Aluminum
Panel rating: 12 volts, 37 amps total. Individual circuit 10 amps.
ST Glass Fuse Block with Negative Bus
Features: Clear insulating cover with label recesses for accept Large Format Labels Cover insulates all conductive parts, satisfying ABYC/USCG requirements and storing spare fuses Tin-plated copper buses and Phosphor Bronze fuse clips give 30 Ampere rating per circuit Accepts AGC (Fast Acting), MDL (Time-Delay) and all other 3AG Glass Fuses Specifications: Cover Material Polycarbonate Base...
Toggle Switch
Dash mount toggle switch available in 2 or 3 position versions. Max panel thickness 12mm
V-Series Rocker Switches
The V switch with its unique features provides a new look for the marine switch market. Sealed to an IP68 rating and also available with panel to bezel sealing, the V switch is available with or without illumination and with the option of lens legends to identify the switch function (horn,bilge pump, searchlight, windscreen wiper, navlights). The V switch allows for a single switch or module of...
Waterproof Toggle switch
On/Off panel mount toggle switch with waterprrof cover. Max panel thickness: 12mm
