Once it has been determined that the system meets the minimum hardware requirements for installing FreeBSD, the installation file should be downloaded and the installation media prepared. Before doing this, check that the system is ready for an installation by verifying the items in this checklist:
Back Up Important Data
Before installing any operating system, always backup all important data first. Do not store the backup on the system being installed. Instead, save the data to a removable disk such as a USB drive, another system on the network, or an online backup service. Test the backup before starting the installation to make sure it contains all of the needed files. Once the installer formats the system's disk, all data stored on that disk will be lost.
Decide Where to Install FreeBSD
If FreeBSD will be the only operating system installed, this step can be skipped. But if FreeBSD will share the disk with another operating system, decide which disk or partition will be used for FreeBSD.
In the i386 and amd64 architectures, disks can be divided into multiple partitions using one of two partitioning schemes. A traditional Master Boot Record (MBR) holds a partition table defining up to four primary partitions. For historical reasons, FreeBSD calls these primary partition slices. One of these primary partitions can be made into an extended partition containing multiple logical partitions. The GUID Partition Table (GPT) is a newer and simpler method of partitioning a disk. Common GPT implementations allow up to 128 partitions per disk, eliminating the need for logical partitions.
Some older operating systems, like Windows® XP, are not compatible with the GPT partition scheme. If FreeBSD will be sharing a disk with such an operating system, MBR partitioning is required.
The FreeBSD boot loader requires either a primary or GPT partition. If all of the primary or GPT partitions are already in use, one must be freed for FreeBSD. To create a partition without deleting existing data, use a partition resizing tool to shrink an existing partition and create a new partition using the freed space.
A variety of free and commercial partition resizing tools are listed at http://en.wikipedia.org/wiki/List_of_disk_partitioning_software. GParted Live (http://gparted.sourceforge.net/livecd.php) is a free live CD which includes the GParted partition editor. GParted is also included with many other Linux live CD distributions.
When used properly, disk shrinking utilities can safely create space for creating a new partition. Since the possibility of selecting the wrong partition exists, always backup any important data and verify the integrity of the backup before modifying disk partitions.
Disk partitions containing different operating systems make it possible to install multiple operating systems on one computer. An alternative is to use virtualization (Chapter 21, Virtualization) which allows multiple operating systems to run at the same time without modifying any disk partitions.
Collect Network Information
Some FreeBSD installation methods require a network connection in order to download the installation files. After any installation, the installer will offer to setup the system's network interfaces.
If the network has a DHCP server, it can be used to provide automatic network configuration. If DHCP is not available, the following network information for the system must be obtained from the local network administrator or Internet service provider:
Check for FreeBSD Errata
Although the FreeBSD Project strives to ensure that each release of FreeBSD is as stable as possible, bugs occasionally creep into the process. On very rare occasions those bugs affect the installation process. As these problems are discovered and fixed, they are noted in the FreeBSD Errata (https://www.freebsd.org/releases/11.1R/errata.html) on the FreeBSD web site. Check the errata before installing to make sure that there are no problems that might affect the installation.
Information and errata for all the releases can be found on the release information section of the FreeBSD web site (https://www.freebsd.org/releases/index.html).
The FreeBSD installer is not an application that can be run from within another operating system. Instead, download a FreeBSD installation file, burn it to the media associated with its file type and size (CD, DVD, or USB), and boot the system to install from the inserted media.
FreeBSD installation files are available at www.freebsd.org/where.html#download.
Each installation file's name includes the release version of
FreeBSD, the architecture, and the type of file. For example, to
install FreeBSD 10.2 on an amd64 system from a
DVD, download
FreeBSD-10.2-RELEASE-amd64-dvd1.iso, burn
this file to a DVD, and boot the system
with the DVD inserted.
Installation files are available in several formats. The formats vary depending on computer architecture and media type.
Additional
installation files are included for computers that boot with
UEFI (Unified Extensible Firmware
Interface). The names of these files include the string
uefi.
File types:
-bootonly.iso: This is the smallest
installation file as it only contains the installer. A
working Internet connection is required during
installation as the installer will download the files it
needs to complete the FreeBSD installation. This file should
be burned to a CD using a
CD burning application.
-disc1.iso: This file contains all
of the files needed to install FreeBSD, its source, and the
Ports Collection. It should be burned to a
CD using a CD
burning application.
-dvd1.iso: This file contains all
of the files needed to install FreeBSD, its source, and the
Ports Collection. It also contains a set of popular
binary packages for installing a window manager and some
applications so that a complete system can be installed
from media without requiring a connection to the Internet.
This file should be burned to a DVD
using a DVD burning application.
-memstick.img: This file contains
all of the files needed to install FreeBSD, its source, and
the Ports Collection. It should be burned to a
USB stick using the instructions
below.
-mini-memstick.img: Like
-bootonly.iso, does not include
installation files, but downloads them as needed. A
working internet connection is required during
installation. Write this file to a USB
stick as shown in Section 2.3.1.1, “Writing an Image File to USB”.
After downloading the image file, download
CHECKSUM.SHA256 from
the same directory. Calculate a
checksum for the image file.
FreeBSD provides sha256(1) for this, used as sha256
.
Other operating systems have similar programs.imagefilename
Compare the calculated checksum with the one shown in
CHECKSUM.SHA256. The checksums must
match exactly. If the checksums do not match, the image file
is corrupt and must be downloaded again.
The *.img file is an
image of the complete contents of a
memory stick. It cannot be copied to
the target device as a file. Several applications are
available for writing the *.img to a
USB stick. This section describes two of
these utilities.
Before proceeding, back up any important data on the USB stick. This procedure will erase the existing data on the stick.
dd to Write the
ImageThis example uses /dev/da0 as
the target device where the image will be written. Be
very careful that the correct
device is used as this command will destroy the existing
data on the specified target device.
The dd(1) command-line utility is
available on BSD, Linux®, and Mac OS® systems. To burn
the image using dd, insert the
USB stick and determine its device
name. Then, specify the name of the downloaded
installation file and the device name for the
USB stick. This example burns the
amd64 installation image to the first
USB device on an existing FreeBSD
system.
#dd if=FreeBSD-10.2-RELEASE-amd64-memstick.imgof=/dev/da0bs=1M conv=sync
If this command fails, verify that the USB stick is not mounted and that the device name is for the disk, not a partition. Some operating systems might require this command to be run with sudo(8). Systems like Linux® might buffer writes. To force all writes to complete, use sync(8).
Be sure to give the correct drive letter as the existing data on the specified drive will be overwritten and destroyed.
Obtaining Image Writer for Windows®
Image Writer for
Windows® is a free application that can
correctly write an image file to a memory stick.
Download it from https://sourceforge.net/projects/win32diskimager/
and extract it into a folder.
Writing the Image with Image Writer
Double-click the
Win32DiskImager icon to start
the program. Verify that the drive letter shown under
Device is the drive
with the memory stick. Click the folder icon and select
the image to be written to the memory stick. Click
to accept the
image file name. Verify that everything is correct, and
that no folders on the memory stick are open in other
windows. When everything is ready, click
to write the
image file to the memory stick.
You are now ready to start installing FreeBSD.
All FreeBSD documents are available for download at https://download.freebsd.org/ftp/doc/
Questions that are not answered by the
documentation may be
sent to <freebsd-questions@FreeBSD.org>.
Send questions about this document to <freebsd-doc@FreeBSD.org>.