Review: Peak Atlas ESR70 Capacitance and ESR meter
A review of the Peak ESR70+
ESR and capacitance meter.
A comparison to the following multimeters:
Fluke 287,
Agilent U1272A, UNI-T UT71D, Fluke115, Fluke 8846A and Fluke17B
Buy it here:
http://astore.amazon.com/m0711-20/detail/B005NIBEYU
Discussion and pictures on forum: http://mjlorton.com/forum/index
.php?action=post;board=12.0
---------------------
Click "
Show more" -------------------------------
My website and forum:- http://www.mjlorton.com
Donations and contributions:- http://www.mjlorton.com
My techie channel MJLorton -
Solar Power and
Electronic Measurement Equipment - http://www.youtube.com/MJLorton
My
Techie Amazon Store: http://astore.amazon.com/m0711-20
My other channel VBlogMag - For almost any topic under the sun! - http://www.youtube.com/VBlogMag
My VBlogMag Amazon Store: http://astore.amazon.com/vblogmag-20
-----------------------------------------------------------------------
=================================================
Video sponsor,
Pass Ltd - their websites:
http://www.tester.co.uk/?cmid=QmhzQjcxYjVlc1E9&afid;=bFcwbzliNzVDc289&ats;=K2EyUjZNTDh3UTA9 -
Test Equipment and Test-meter suppliers and
http://www.calibrate.co.uk -
Calibration and service of test equipment
=================================================
The Atlas ESR
PLUS is even better
This new model introduces new features including "Audible
Alerts" and enhanced measurement range. Every measurement of ESR will be shown on the display as usual of course, but the unit will also produce a variety of tones depending on the value of ESR. And the tones themselves are surprising pleasant, including "Bell-like" pings (a couple of different types for ESR that is below certain values), and also a "Beep-Barp" type tone for ESR that is likely to be too high. There is also a reassuring "
Blip" when the measurement has started and completed.
The ESR measurement range has also been enhanced, now doubled, measuring from 0 to 40 ohms with a resolution as low as
0.01 ohms. This remarkably fine resolution is great for assessing large capacitors and even allows you to use the
Atlas ESR+ for tracing short-circuits and finding the precise area of a
PCB that has that invisible wisp of solder.
Great Service Aid
Measuring a capacitor's ESR (equivalent series resistance) is a great indicator of capacitor condition. The Atlas ESR PLUS offers instant results, if the instrument is switched on then just connect the probes to your capacitor and the analysis starts automatically. You can even use the Atlas ESR PLUS in-circuit, saving you the trouble of removing capacitors. When testing capacitors out-of-circuit, the unit will also display the capacitance.
Features
Measure capacitance and ESR.
Suitable for any capacitor type between 1uF and 22000uF including motor capacitors, smoothing capacitors, electrolytics, polypropylenes, in fact any dielectric type.
Automatic analysis start when applying probes to capacitor.
New enhanced dynamic range of 0.00 to 40.0 ohms.
Audible alerts for various ESR levels.
ESR
Resolution as fine as 0.01 ohms.
Supports capacitors from 1uF to 22000uF.
Capable of In-Circuit measurement of ESR.
Polarity free, connect any way round.
Protected against highly charged capacitors.
Great for low DC resistance checking too (such as PCB short checking).
Supplied complete with 2mm male test leads and 2mm compatible gold plated crocs.
Test leads are ultra-durable and 45cm (18") long with 2mm plugs.
Enhanced software compensation of cable resistance.
Complete with comprehensive user guide.
Capacitor reference table included.
Tests at the industry standard 100kHz.
Long life alkaline battery fitted.
Just
100mm x
70mm x
20mm