- published: 10 May 2011
- views: 91742
Create your page here
Wednesday, 02 March 2016
-
remove the playlist3800
- remove the playlist3800
back to playlist
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/164-learn-chinese-online-3800-useful-chinese-sentences3800-1-1
Learn Mandarin - Learn Chinese Online - 3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac at the FTW Ranch in Texas. This new rifle weighs 12.5 pounds without the scope. This shot is said to be a new world record. We will settle for a fun one.
Hill Country Rifles: http://hillcountryrifles.com
HCR Tactical: http://hillcountryrifles.com/hcr/tactical
FTW RANCH: http://www.ftwoutfitters.com/
Previous 3600 Yard Shot: https://youtu.be/0Z1rktqTvVQ
EQUIPMENT
Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac
Rifle Weight:: 12.5 pounds (without scope)
Stiller Precision action (http://www.viperactions.com)
Benchmark match, 27” fluted 1:11 twist barrel (http://www.benchmark-barrels.com)
McMillan A3/5 adjustable stock customized by Hill Country Rifle to fit action (https://www.mcmillanusa.com/mcmillan-rifle-stocks/)
Hill Country Rifle Accurizing with aluminum pillar and glass bedded action (http://www.hillcountryrifles.com/hcr/accurizing)
Baer Custom trigger guard and 7 round DBM (https://www.lesbaer.com)
Jewell trigger, set 2.0 pounds
Nightforce Beast 5-25X56 Scope (http://nightforceoptics.com/beast)
Hill Country Rifle custom 200 MOA scope mount with Nightforce 34mm rings
Benchmark Miller Brake for recoil reduction (http://benchmark-barrels.com/Benchmark_Barrels/Benchmark_Barrels_-_Muzzle_Brakes.html)
SPOTTING SCOPES
Swarovski STR80 MRAD spotting scope with 20X60 eyepiece and camera adapter
(http://www.swarovskioptik.com/hunting/blog/STR_80)
AMMUNITION
375 CheyTac precision ammunition with 350 grain match bullets (http://cheytac.com/ammunition/)
BALLISTIC DATA
Muzzle Velocity: 3044 fps with extreme spread of only 6 fps
Ballistic coefficient: .810 G1
Barrel Twist: 1 in 11 inches
Twist Direction: Right
Distance: 3800 yards
Temperature: 86°F
Humidity: 50%
Air Density Altitude: 4280 ft
Wind Speed: 16.5 mph
Wind Angle: 17°
Time of Flight: 8.593 sec
Velocity at target: 850.7 fps (fyi, typical 45 ACP pistol is ~830 fps)
Energy at target: 562.4 ft-lbs
- published: 18 Sep 2015
- views: 436273
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connector.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
- published: 22 Nov 2013
- views: 102605
Mods and Vendors list
www.zzperformance.com
Short Stack Intercooler
UD Water Pump Pulley
UD Alternator Pulley
Ported Manifolds
www.Intense-Racing.com
PCM
Solid Motor Mounts
IAT Extention
www.W-Bodystore.com
3 Inch Downpipe
Intercooler Pump Harness/Relay
Shortened Dog Bones
Rear Strut Tower Brace
www.PFYC.com
Aeroforce Scan Gauge
3 gauge Pod
U-Bend Delete
www.3800performance.com
Throttle Body Heat Shield
Throttle Body Spacers
Ebay user "American Superchargers"
Modular Pulley System
All other parts not listed were purchased at various auto parts stores,Ebay users I dont remember and Walmart.
- published: 04 Jan 2009
- views: 289766
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your vehicle runs perfectly but the tachometer sometimes registers incorrectly then you should replace this sensor ASAP before it leaves you stranded somewhere.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
- published: 22 Nov 2013
- views: 187608
チャンネル登録をよろしくお願いします！
https://www.youtube.com/c/kosuke
ラオウ用のダンジョンとしか思えないレベル
ラオウお持ちの方は是非運用してみて下さい。
＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿
▼出演者一覧
コスケ
twitter
https://twitter.com/kosukepad1
理事長
twitter
https://twitter.com/rijicho_
- published: 10 Nov 2015
- views: 589348
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why.
The crank sensor plays a very important part in the well being of your vehicle.
Steven Sapyak:
"The actual threads for the harmonic balancer are: 6mm X 1.0 by 70,80,or 90mm long. Also it helps to use hardened flat washers too."
- published: 03 Apr 2013
- views: 47429
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Marile à l'assurance... Merci à David qui pour les images a fait 5 fois le crux et au moins 4 fois la partie haute... Grivel partenaire de David.
http://www.grivel.com
http://www.tvmountain.com
- published: 28 Jan 2010
- views: 258535
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you need it.
- published: 31 May 2013
- views: 45431
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge.
Ploughing using a Claas Xerion 3800 with a 9 furrow Lemken Vari-Diamant 10 plough, from Van Nieuwenhuijzen & van Vugt uit Oude Tonge (NL)
Pflügen mit einem Claas Xerion 3800 mit 9 Furche Lemken Vari-Diamant 10 Pflug von Van Vugt & Van Nieuwenhuijzen von Oude Tonge (NL).
- published: 09 Feb 2014
- views: 164132
The 38th century of the Anno Domini (common) era will span from January 1, 3701–December 31, 3800 of the Gregorian calendar. It will be the eighth century of the 4th millennium.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/38th_century
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
9:583800 Useful Chinese Sentences(常用汉语3,800句) _1_1
3800 Useful Chinese Sentences(常用汉语3,800句) _1_13800 Useful Chinese Sentences(常用汉语3,800句) _1_1
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/164-learn-chinese-online-3800-useful-chinese-sentences3800-1-1 Learn Mandarin - Learn Chinese Online - 3800 Useful Chinese Sentences(常用汉语3,800句) _1_1 -
5:303800 Yard Long Range Shot by HCR Team
3800 Yard Long Range Shot by HCR Team3800 Yard Long Range Shot by HCR Team
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac at the FTW Ranch in Texas. This new rifle weighs 12.5 pounds without the scope. This shot is said to be a new world record. We will settle for a fun one. Hill Country Rifles: http://hillcountryrifles.com HCR Tactical: http://hillcountryrifles.com/hcr/tactical FTW RANCH: http://www.ftwoutfitters.com/ Previous 3600 Yard Shot: https://youtu.be/0Z1rktqTvVQ EQUIPMENT Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac Rifle Weight:: 12.5 pounds (without scope) Stiller Precision action (http://www.viperactions.com) Benchmark match, 27” fluted 1:11 twist barrel (http://www.benchmark-barrels.com) McMillan A3/5 adjustable stock customized by Hill Country Rifle to fit action (https://www.mcmillanusa.com/mcmillan-rifle-stocks/) Hill Country Rifle Accurizing with aluminum pillar and glass bedded action (http://www.hillcountryrifles.com/hcr/accurizing) Baer Custom trigger guard and 7 round DBM (https://www.lesbaer.com) Jewell trigger, set 2.0 pounds Nightforce Beast 5-25X56 Scope (http://nightforceoptics.com/beast) Hill Country Rifle custom 200 MOA scope mount with Nightforce 34mm rings Benchmark Miller Brake for recoil reduction (http://benchmark-barrels.com/Benchmark_Barrels/Benchmark_Barrels_-_Muzzle_Brakes.html) SPOTTING SCOPES Swarovski STR80 MRAD spotting scope with 20X60 eyepiece and camera adapter (http://www.swarovskioptik.com/hunting/blog/STR_80) AMMUNITION 375 CheyTac precision ammunition with 350 grain match bullets (http://cheytac.com/ammunition/) BALLISTIC DATA Muzzle Velocity: 3044 fps with extreme spread of only 6 fps Ballistic coefficient: .810 G1 Barrel Twist: 1 in 11 inches Twist Direction: Right Distance: 3800 yards Temperature: 86°F Humidity: 50% Air Density Altitude: 4280 ft Wind Speed: 16.5 mph Wind Angle: 17° Time of Flight: 8.593 sec Velocity at target: 850.7 fps (fyi, typical 45 ACP pistol is ~830 fps) Energy at target: 562.4 ft-lbs -
10:063800 3.8L GM engine stalling issue quick fix
3800 3.8L GM engine stalling issue quick fix3800 3.8L GM engine stalling issue quick fix
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connector. I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user. -
6:393800 Series 2 Modding Basics
3800 Series 2 Modding Basics3800 Series 2 Modding Basics
Mods and Vendors list www.zzperformance.com Short Stack Intercooler UD Water Pump Pulley UD Alternator Pulley Ported Manifolds www.Intense-Racing.com PCM Solid Motor Mounts IAT Extention www.W-Bodystore.com 3 Inch Downpipe Intercooler Pump Harness/Relay Shortened Dog Bones Rear Strut Tower Brace www.PFYC.com Aeroforce Scan Gauge 3 gauge Pod U-Bend Delete www.3800performance.com Throttle Body Heat Shield Throttle Body Spacers Ebay user "American Superchargers" Modular Pulley System All other parts not listed were purchased at various auto parts stores,Ebay users I dont remember and Walmart. -
22:35Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
Crank Position Sensor Replacement - Stalling 3800 3.8 EngineCrank Position Sensor Replacement - Stalling 3800 3.8 Engine
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your vehicle runs perfectly but the tachometer sometimes registers incorrectly then you should replace this sensor ASAP before it leaves you stranded somewhere. I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user. -
7:09パズドラ【3800万DLチャレダンLv10】ラオウPT
パズドラ【3800万DLチャレダンLv10】ラオウPTパズドラ【3800万DLチャレダンLv10】ラオウPT
チャンネル登録をよろしくお願いします！ https://www.youtube.com/c/kosuke ラオウ用のダンジョンとしか思えないレベル ラオウお持ちの方は是非運用してみて下さい。 ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ▼出演者一覧 コスケ twitter https://twitter.com/kosukepad1 理事長 twitter https://twitter.com/rijicho_ -
11:102000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why. The crank sensor plays a very important part in the well being of your vehicle. Steven Sapyak: "The actual threads for the harmonic balancer are: 6mm X 1.0 by 70,80,or 90mm long. Also it helps to use hardened flat washers too." -
8:218a+ à 3800
8a+ à 38008a+ à 3800
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Marile à l'assurance... Merci à David qui pour les images a fait 5 fois le crux et au moins 4 fois la partie haute... Grivel partenaire de David. http://www.grivel.com http://www.tvmountain.com -
8:012001 Buick Park Avenue Series 2 3800 Tips & Fixes
2001 Buick Park Avenue Series 2 3800 Tips & Fixes2001 Buick Park Avenue Series 2 3800 Tips & Fixes
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you need it. -
12:22Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TVConrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
This is the Cranes Etc TV review of Conrad's 1/50 scale model of the Terex Superlift 3800 Crawler Crane in the colours of Franz Bracht. The model number is 2744/04. The full review is on the Cranes Etc website: http://www.CranesEtc.co.uk. -
5:16Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge. Ploughing using a Claas Xerion 3800 with a 9 furrow Lemken Vari-Diamant 10 plough, from Van Nieuwenhuijzen & van Vugt uit Oude Tonge (NL) Pflügen mit einem Claas Xerion 3800 mit 9 Furche Lemken Vari-Diamant 10 Pflug von Van Vugt & Van Nieuwenhuijzen von Oude Tonge (NL). -
19:45How to Replace Power Steering Pump GM 3800
How to Replace Power Steering Pump GM 3800 -
23:313800 Useful Chinese Sentences(常用汉语3,800句)5-1
3800 Useful Chinese Sentences(常用汉语3,800句)5-1 -
4:18How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8LHow To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040 1A Auto shows you how to repair, install, fix, change or replace old, malfunctioning, misfired, or fouled spark plugs and wires. This video is applicable to Buick LeSabre, model years 93, 94, 95, 96, 97, 98, and 99.
- 10th century BC
- 11th century
- 11th century BC
- 12th century
- 12th century BC
- 13th century
- 13th century BC
- 14th century
- 14th century BC
- 15th century
- 15th century BC
- 16th century
- 16th century BC
- 17th century
- 17th century BC
- 18th century
- 18th century BC
- 19th century
- 19th century BC
- 1st century
- 1st century BC
- 1st millennium
- 1st millennium BC
- 20th century
- 20th century BC
- 21st century
- 21st century BC
- 22nd century
- 22nd century BC
- 23rd century
- 23rd century BC
- 24th century
- 24th century BC
- 25th century
- 25th century BC
- 26th century
- 26th century BC
- 27th century
- 27th century BC
- 28th century
- 28th century BC
- 29th century
- 29th century BC
- 2nd century
- 2nd century BC
- 2nd millennium
- 2nd millennium BC
- 30th century
- 30th century BC
- 31st century
- 31st century BC
- 32nd century
- 32nd century BC
- 33rd century
- 33rd century BC
- 34th century
- 34th century BC
- 35th century
- 35th century BC
- 36th century
- 36th century BC
- 37th century
- 37th century BC
- 38th century
- 38th century BC
- 39th century
- 39th century BC
- 3rd century
- 3rd century BC
- 3rd millennium
- 3rd millennium BC
- 40th century
- 40th century BC
- 4th century
- 4th century BC
- 4th millennium
- 4th millennium BC
- 5th century
- 5th century BC
- 6th century
- 6th century BC
- 7th century
- 7th century BC
- 8th century
- 8th century BC
- 9th century
- 9th century BC
- Anno Domini
- Centuries
- Century
- Common era
- Gregorian calendar
- Interstellar colony
- Jupiter
- List of decades
- Michael Ansara
- Michael Wang
- Millennium
- Neptune
- Nostradamus
- Nuclear holocaust
- Saturn
- Uranus
-
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/164-learn-chinese-online-3800-useful-chinese-sentences3800-1-1 Learn Mandarin - Learn Chinese Online - 3800 Useful Chinese Sentences(常用汉语3,800句) _1_1 -
3800 Yard Long Range Shot by HCR Team
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac at the FTW Ranch in Texas. This new rifle weighs 12.5 pounds without the scope. This shot is said to be a new world record. We will settle for a fun one. Hill Country Rifles: http://hillcountryrifles.com HCR Tactical: http://hillcountryrifles.com/hcr/tactical FTW RANCH: http://www.ftwoutfitters.com/ Previous 3600 Yard Shot: https://youtu.be/0Z1rktqTvVQ EQUIPMENT Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac Rifle Weight:: 12.5 pounds (without scope) Stiller Precision action (http://www.viperactions.com) Benchmark match, 27” fluted 1:11 twist barrel (http://www.ben... -
3800 3.8L GM engine stalling issue quick fix
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connector. I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this... -
3800 Series 2 Modding Basics
Mods and Vendors list www.zzperformance.com Short Stack Intercooler UD Water Pump Pulley UD Alternator Pulley Ported Manifolds www.Intense-Racing.com PCM Solid Motor Mounts IAT Extention www.W-Bodystore.com 3 Inch Downpipe Intercooler Pump Harness/Relay Shortened Dog Bones Rear Strut Tower Brace www.PFYC.com Aeroforce Scan Gauge 3 gauge Pod U-Bend Delete www.3800performance.com Throttle Body Heat Shield Throttle Body Spacers Ebay user "American Superchargers" Modular Pulley System All other parts not listed were purchased at various auto parts stores,Ebay users I dont remember and Walmart. -
Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your vehicle runs perfectly but the tachometer sometimes registers incorrectly then you should replace this sensor ASAP before it leaves you stranded somewhere. I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or impli... -
パズドラ【3800万DLチャレダンLv10】ラオウPT
チャンネル登録をよろしくお願いします！ https://www.youtube.com/c/kosuke ラオウ用のダンジョンとしか思えないレベル ラオウお持ちの方は是非運用してみて下さい。 ＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿ ▼出演者一覧 コスケ twitter https://twitter.com/kosukepad1 理事長 twitter https://twitter.com/rijicho_ -
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why. The crank sensor plays a very important part in the well being of your vehicle. Steven Sapyak: "The actual threads for the harmonic balancer are: 6mm X 1.0 by 70,80,or 90mm long. Also it helps to use hardened flat washers too." -
8a+ à 3800
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Marile à l'assurance... Merci à David qui pour les images a fait 5 fois le crux et au moins 4 fois la partie haute... Grivel partenaire de David. http://www.grivel.com http://www.tvmountain.com -
2001 Buick Park Avenue Series 2 3800 Tips & Fixes
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you need it. -
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
This is the Cranes Etc TV review of Conrad's 1/50 scale model of the Terex Superlift 3800 Crawler Crane in the colours of Franz Bracht. The model number is 2744/04. The full review is on the Cranes Etc website: http://www.CranesEtc.co.uk. -
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge. Ploughing using a Claas Xerion 3800 with a 9 furrow Lemken Vari-Diamant 10 plough, from Van Nieuwenhuijzen & van Vugt uit Oude Tonge (NL) Pflügen mit einem Claas Xerion 3800 mit 9 Furche Lemken Vari-Diamant 10 Pflug von Van Vugt & Van Nieuwenhuijzen von Oude Tonge (NL). -
-
-
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040 1A Auto shows you how to repair, install, fix, change or replace old, malfunctioning, misfired, or fouled spark plugs and wires. This video is applicable to Buick LeSabre, model years 93, 94, 95, 96, 97, 98, and 99. -
How To: Water Pump Replacement GM 3800 V6 ( Change / Install for Chevy, Buick, Pontiac, Oldsmobile)
How to replace a water pump on any 3800 V6 engine. Vehicle for demonstration is a 1989 Buick Lesabre Works for any Buick, GM, Oldsmobile, or Pontiac with the 3.8L 3800 V6. Symptoms of water pump failure from least to most severe: Coolant leak. Engine rattling noise. Serpentine belt falls off while driving. -
How To Replace The Head Gasket and Intake Manifold Gaskets On A GM 3800 Engine
In this walkthrough I replace the head gaskets, upper intake manifold (UIM) gaskets, and lower intake manifold (LIM) gaskets on a 1997 pontiac bonneville. These steps will be identical for almost any GM 3800 / 3400 / 3100 series II motor. If you have any questions feel free to post them on the video and I'll do my best to try to help! Here is a link to the the text walkthrough I used as a guide for making this video: http://www.w-body.com/showthread.php/49858-Any-info-on-changing-series-2-3800-head-gaskets Also here's a list of torque specs for most of the motor: Camshaft Bolt: 74 ft/lbs + 90 degrees angle torque Camshaft thrust plate: 132 in/lbs (T30 torx) Front cover bolts: 15 ft/lbs + 40 degrees angle torque Oil pan bolts: 125 in/lbs Crank sensor nuts: 18 ft/lbs Camshaft sensor b... -
Clash of Clans - THIS IS CRAZY! "TOWN HALL 7 AT 3,800+ TROPHIES!" How did he do it?
Clash of Clans Gameplay & Commentary! Do you like Clash of Clans? Yea you do! Since you like Clash of Clans, check out the links below for more! WORLD'S FASTEST FREE GEMS! (CLICK HERE) - http://cashforap.ps/wite Clash of Clans FREE GEMS! Click this link and use invite code "wite" for bonus points! http://www.getcashforapps.com Instagram- btubehwd T-Shirt Shop- https://www.teepublic.com/stores/mystlc7 CLICK HERE FOR MORE!- http://goo.gl/NhcznX Add me on GooglePlus!- https://plus.google.com/+MYSTlC7 Appbounty Free Gems!- http://abo.io/Wite Follow me on Twitter Here!- https://twitter.com/witelightingHWD Intro Song: Alan Walker- Spectre Outro song- "Sorry" by Dee Dot Jones Music by Dee Dot Jones- http://www.datpiff.com/mixtapes-search.php Contact Email: theoriginalmystic7@gmail.com... -
Terex Superlift 3800 Review
review of the model www.facebook.com/cranedude07 my instagram: @cranedude07 -
-
"How To" GM 3800 V6 (3.8L) Starter replacement
BE SURE TO DISCONNECT BATTERY SO YOU DO NOT BECOME BBQ! Also, it is always a good idea to replace the starter solenoid when you replace a starter. I have had the old solenoid catch fire on me when replacing a starter in an old ford truck before! Please let me know if you have any questions... this should apply to most if not all Starters for 3.8L's. This car is a 1999 Oldsmobile Eighty Eight. -
Steil Using its Terex Cranes Superlift 3800 crawler crane for Some Heavy Lifting
A crane's return on investment also depends on its versatility. This is another aspect where the Terex® Superlift 3800 lattice boom crawler crane is setting new standards. Trier-based Steil Kranarbeiten GmbH & Co. KG used their Superlift 3800 crane to build a bridge in Luxemburg only two days after the same machine was used to erect a wind turbine in the Hunsrück mountain range. -
GM 3800 Intake Manifold Replacement
The plastic upper intake manifold goes bad on the 3800 series 2 motor. In this case I found coolant inside the air intake tube by the air filter (not good). The motor did give symptoms of problems like it would miss when idling for a long time and the check engine light would come on. The big red flag was that it would use coolant but no leaks. Also, oil was inside the intake manifold when the upper plastic was taken off. It will take a good couple of hours to do this job. -
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
- Order: Reorder
- Duration: 9:58
- Updated: 10 May 2011
- views: 91742
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chine...
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/164-learn-chinese-online-3800-useful-chinese-sentences3800-1-1
Learn Mandarin - Learn Chinese Online - 3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
wn.com/3800 Useful Chinese Sentences(常用汉语3,800句) 1 1
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/164-learn-chinese-online-3800-useful-chinese-sentences3800-1-1
Learn Mandarin - Learn Chinese Online - 3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
- published: 10 May 2011
- views: 91742
3800 Yard Long Range Shot by HCR Team
- Order: Reorder
- Duration: 5:30
- Updated: 18 Sep 2015
- views: 436273
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country...
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac at the FTW Ranch in Texas. This new rifle weighs 12.5 pounds without the scope. This shot is said to be a new world record. We will settle for a fun one.
Hill Country Rifles: http://hillcountryrifles.com
HCR Tactical: http://hillcountryrifles.com/hcr/tactical
FTW RANCH: http://www.ftwoutfitters.com/
Previous 3600 Yard Shot: https://youtu.be/0Z1rktqTvVQ
EQUIPMENT
Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac
Rifle Weight:: 12.5 pounds (without scope)
Stiller Precision action (http://www.viperactions.com)
Benchmark match, 27” fluted 1:11 twist barrel (http://www.benchmark-barrels.com)
McMillan A3/5 adjustable stock customized by Hill Country Rifle to fit action (https://www.mcmillanusa.com/mcmillan-rifle-stocks/)
Hill Country Rifle Accurizing with aluminum pillar and glass bedded action (http://www.hillcountryrifles.com/hcr/accurizing)
Baer Custom trigger guard and 7 round DBM (https://www.lesbaer.com)
Jewell trigger, set 2.0 pounds
Nightforce Beast 5-25X56 Scope (http://nightforceoptics.com/beast)
Hill Country Rifle custom 200 MOA scope mount with Nightforce 34mm rings
Benchmark Miller Brake for recoil reduction (http://benchmark-barrels.com/Benchmark_Barrels/Benchmark_Barrels_-_Muzzle_Brakes.html)
SPOTTING SCOPES
Swarovski STR80 MRAD spotting scope with 20X60 eyepiece and camera adapter
(http://www.swarovskioptik.com/hunting/blog/STR_80)
AMMUNITION
375 CheyTac precision ammunition with 350 grain match bullets (http://cheytac.com/ammunition/)
BALLISTIC DATA
Muzzle Velocity: 3044 fps with extreme spread of only 6 fps
Ballistic coefficient: .810 G1
Barrel Twist: 1 in 11 inches
Twist Direction: Right
Distance: 3800 yards
Temperature: 86°F
Humidity: 50%
Air Density Altitude: 4280 ft
Wind Speed: 16.5 mph
Wind Angle: 17°
Time of Flight: 8.593 sec
Velocity at target: 850.7 fps (fyi, typical 45 ACP pistol is ~830 fps)
Energy at target: 562.4 ft-lbs
wn.com/3800 Yard Long Range Shot By Hcr Team
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distance of 3800 yards (2.16 miles). The shot was made with the Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac at the FTW Ranch in Texas. This new rifle weighs 12.5 pounds without the scope. This shot is said to be a new world record. We will settle for a fun one.
Hill Country Rifles: http://hillcountryrifles.com
HCR Tactical: http://hillcountryrifles.com/hcr/tactical
FTW RANCH: http://www.ftwoutfitters.com/
Previous 3600 Yard Shot: https://youtu.be/0Z1rktqTvVQ
EQUIPMENT
Hill Country Rifle Extreme Long Range Carry Weight 375 CheyTac
Rifle Weight:: 12.5 pounds (without scope)
Stiller Precision action (http://www.viperactions.com)
Benchmark match, 27” fluted 1:11 twist barrel (http://www.benchmark-barrels.com)
McMillan A3/5 adjustable stock customized by Hill Country Rifle to fit action (https://www.mcmillanusa.com/mcmillan-rifle-stocks/)
Hill Country Rifle Accurizing with aluminum pillar and glass bedded action (http://www.hillcountryrifles.com/hcr/accurizing)
Baer Custom trigger guard and 7 round DBM (https://www.lesbaer.com)
Jewell trigger, set 2.0 pounds
Nightforce Beast 5-25X56 Scope (http://nightforceoptics.com/beast)
Hill Country Rifle custom 200 MOA scope mount with Nightforce 34mm rings
Benchmark Miller Brake for recoil reduction (http://benchmark-barrels.com/Benchmark_Barrels/Benchmark_Barrels_-_Muzzle_Brakes.html)
SPOTTING SCOPES
Swarovski STR80 MRAD spotting scope with 20X60 eyepiece and camera adapter
(http://www.swarovskioptik.com/hunting/blog/STR_80)
AMMUNITION
375 CheyTac precision ammunition with 350 grain match bullets (http://cheytac.com/ammunition/)
BALLISTIC DATA
Muzzle Velocity: 3044 fps with extreme spread of only 6 fps
Ballistic coefficient: .810 G1
Barrel Twist: 1 in 11 inches
Twist Direction: Right
Distance: 3800 yards
Temperature: 86°F
Humidity: 50%
Air Density Altitude: 4280 ft
Wind Speed: 16.5 mph
Wind Angle: 17°
Time of Flight: 8.593 sec
Velocity at target: 850.7 fps (fyi, typical 45 ACP pistol is ~830 fps)
Energy at target: 562.4 ft-lbs
- published: 18 Sep 2015
- views: 436273
3800 3.8L GM engine stalling issue quick fix
- Order: Reorder
- Duration: 10:06
- Updated: 22 Nov 2013
- views: 102605
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connec...
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connector.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
wn.com/3800 3.8L Gm Engine Stalling Issue Quick Fix
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls. Sometimes the problem is as simple as cleaning an electrical connector.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
- published: 22 Nov 2013
- views: 102605
3800 Series 2 Modding Basics
- Order: Reorder
- Duration: 6:39
- Updated: 04 Jan 2009
- views: 289766
Mods and Vendors list
www.zzperformance.com
Short Stack Intercooler
UD Water Pump Pulley
UD Alternator Pulley
Ported Manifolds
www.Intense-Racing.com
...
Mods and Vendors list
www.zzperformance.com
Short Stack Intercooler
UD Water Pump Pulley
UD Alternator Pulley
Ported Manifolds
www.Intense-Racing.com
PCM
Solid Motor Mounts
IAT Extention
www.W-Bodystore.com
3 Inch Downpipe
Intercooler Pump Harness/Relay
Shortened Dog Bones
Rear Strut Tower Brace
www.PFYC.com
Aeroforce Scan Gauge
3 gauge Pod
U-Bend Delete
www.3800performance.com
Throttle Body Heat Shield
Throttle Body Spacers
Ebay user "American Superchargers"
Modular Pulley System
All other parts not listed were purchased at various auto parts stores,Ebay users I dont remember and Walmart.
wn.com/3800 Series 2 Modding Basics
Mods and Vendors list
www.zzperformance.com
Short Stack Intercooler
UD Water Pump Pulley
UD Alternator Pulley
Ported Manifolds
www.Intense-Racing.com
PCM
Solid Motor Mounts
IAT Extention
www.W-Bodystore.com
3 Inch Downpipe
Intercooler Pump Harness/Relay
Shortened Dog Bones
Rear Strut Tower Brace
www.PFYC.com
Aeroforce Scan Gauge
3 gauge Pod
U-Bend Delete
www.3800performance.com
Throttle Body Heat Shield
Throttle Body Spacers
Ebay user "American Superchargers"
Modular Pulley System
All other parts not listed were purchased at various auto parts stores,Ebay users I dont remember and Walmart.
- published: 04 Jan 2009
- views: 289766
Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
- Order: Reorder
- Duration: 22:35
- Updated: 22 Nov 2013
- views: 187608
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your ...
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your vehicle runs perfectly but the tachometer sometimes registers incorrectly then you should replace this sensor ASAP before it leaves you stranded somewhere.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
wn.com/Crank Position Sensor Replacement Stalling 3800 3.8 Engine
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always restart, then you likely have a bad crankshaft position sensor. If your vehicle runs perfectly but the tachometer sometimes registers incorrectly then you should replace this sensor ASAP before it leaves you stranded somewhere.
I cannot guarantee against unauthorized modifications of this information or improper use of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Be sure to read and follow all safety instructions for any equipment seen or implied in this video, and use safe practices when working with potentially dangerous equipment. No information contained in this video shall create any express or implied warranty or guarantee. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user.
- published: 22 Nov 2013
- views: 187608
パズドラ【3800万DLチャレダンLv10】ラオウPT
- Order: Reorder
- Duration: 7:09
- Updated: 10 Nov 2015
- views: 589348
チャンネル登録をよろしくお願いします！
https://www.youtube.com/c/kosuke
ラオウ用のダンジョンとしか思えないレベル
ラオウお持ちの方は是非運用してみて下さい。
＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿
▼出演者一覧
コスケ
twitter
https://twitter.com/kosukepa...
チャンネル登録をよろしくお願いします！
https://www.youtube.com/c/kosuke
ラオウ用のダンジョンとしか思えないレベル
ラオウお持ちの方は是非運用してみて下さい。
＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿
▼出演者一覧
コスケ
twitter
https://twitter.com/kosukepad1
理事長
twitter
https://twitter.com/rijicho_
wn.com/パズドラ【3800万DlチャレダンLv10】ラオウPt
チャンネル登録をよろしくお願いします！
https://www.youtube.com/c/kosuke
ラオウ用のダンジョンとしか思えないレベル
ラオウお持ちの方は是非運用してみて下さい。
＿ ＿ ＿ ＿ ＿ ＿ ＿ ＿
▼出演者一覧
コスケ
twitter
https://twitter.com/kosukepad1
理事長
twitter
https://twitter.com/rijicho_
- published: 10 Nov 2015
- views: 589348
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
- Order: Reorder
- Duration: 11:10
- Updated: 03 Apr 2013
- views: 47429
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why.
The crank sensor plays a very important part in the well be...
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why.
The crank sensor plays a very important part in the well being of your vehicle.
Steven Sapyak:
"The actual threads for the harmonic balancer are: 6mm X 1.0 by 70,80,or 90mm long. Also it helps to use hardened flat washers too."
wn.com/2000 Pontiac Bonneville Ssei 3800 Crank Sensor Replacement Repair Fix
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the reason why.
The crank sensor plays a very important part in the well being of your vehicle.
Steven Sapyak:
"The actual threads for the harmonic balancer are: 6mm X 1.0 by 70,80,or 90mm long. Also it helps to use hardened flat washers too."
- published: 03 Apr 2013
- views: 47429
8a+ à 3800
- Order: Reorder
- Duration: 8:21
- Updated: 28 Jan 2010
- views: 258535
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Maril...
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Marile à l'assurance... Merci à David qui pour les images a fait 5 fois le crux et au moins 4 fois la partie haute... Grivel partenaire de David.
http://www.grivel.com
http://www.tvmountain.com
wn.com/8A À 3800
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-Blanc. Voie ouverte en 19.. par Thierry Renault et Alain Ghersen. Marile à l'assurance... Merci à David qui pour les images a fait 5 fois le crux et au moins 4 fois la partie haute... Grivel partenaire de David.
http://www.grivel.com
http://www.tvmountain.com
- published: 28 Jan 2010
- views: 258535
2001 Buick Park Avenue Series 2 3800 Tips & Fixes
- Order: Reorder
- Duration: 8:01
- Updated: 31 May 2013
- views: 45431
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you...
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you need it.
wn.com/2001 Buick Park Avenue Series 2 3800 Tips Fixes
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car with one of these engines, i know my way around it and can help if you need it.
- published: 31 May 2013
- views: 45431
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
- Order: Reorder
- Duration: 12:22
- Updated: 16 Jan 2016
- views: 18581
This is the Cranes Etc TV review of Conrad's 1/50 scale model of the Terex Superlift 3800 Crawler Crane in the colours of Franz Bracht. The model number is 274...
This is the Cranes Etc TV review of Conrad's 1/50 scale model of the Terex Superlift 3800 Crawler Crane in the colours of Franz Bracht. The model number is 2744/04. The full review is on the Cranes Etc website: http://www.CranesEtc.co.uk.
wn.com/Conrad Terex Superlift 3800 Crawler Crane 'Bracht' By Cranes Etc Tv
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
- Order: Reorder
- Duration: 5:16
- Updated: 09 Feb 2014
- views: 164132
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge.
Ploughing using a Claas...
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge.
Ploughing using a Claas Xerion 3800 with a 9 furrow Lemken Vari-Diamant 10 plough, from Van Nieuwenhuijzen & van Vugt uit Oude Tonge (NL)
Pflügen mit einem Claas Xerion 3800 mit 9 Furche Lemken Vari-Diamant 10 Pflug von Van Vugt & Van Nieuwenhuijzen von Oude Tonge (NL).
wn.com/Claas Xerion 3800 Lemken 9 Furrow Van Nieuwenhuijzen Van Vugt 2013 Part Iii Hd
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. van Nieuwenhuijzen en van Vugt uit Oude-Tonge.
Ploughing using a Claas Xerion 3800 with a 9 furrow Lemken Vari-Diamant 10 plough, from Van Nieuwenhuijzen & van Vugt uit Oude Tonge (NL)
Pflügen mit einem Claas Xerion 3800 mit 9 Furche Lemken Vari-Diamant 10 Pflug von Van Vugt & Van Nieuwenhuijzen von Oude Tonge (NL).
- published: 09 Feb 2014
- views: 164132
How to Replace Power Steering Pump GM 3800
- Order: Reorder
- Duration: 19:45
- Updated: 29 Sep 2014
- views: 73199
3800 Useful Chinese Sentences(常用汉语3,800句)5-1
- Order: Reorder
- Duration: 23:31
- Updated: 19 Dec 2011
- views: 62279
http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/232-3800-us...
http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-useful-chinese-sentences3800-3800-useful-chinese-sentences3800/232-3800-useful-chinese-sentences38005-1
Download pdf and mp3 of this lesson here.
wn.com/3800 Useful Chinese Sentences(常用汉语3,800句)5 1
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
- Order: Reorder
- Duration: 4:18
- Updated: 28 Jun 2013
- views: 35627
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040
1A Auto shows you how to repair, install, fix, change or replace old, malfunctioning, misfired,...
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040
1A Auto shows you how to repair, install, fix, change or replace old, malfunctioning, misfired, or fouled spark plugs and wires. This video is applicable to Buick LeSabre, model years 93, 94, 95, 96, 97, 98, and 99.
wn.com/How To Install Replace Spark Plug Wires 1993 99 Buick Lesabre 3800 3.8L
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040
1A Auto shows you how to repair, install, fix, change or replace old, malfunctioning, misfired, or fouled spark plugs and wires. This video is applicable to Buick LeSabre, model years 93, 94, 95, 96, 97, 98, and 99.
- published: 28 Jun 2013
- views: 35627
How To: Water Pump Replacement GM 3800 V6 ( Change / Install for Chevy, Buick, Pontiac, Oldsmobile)
- Order: Reorder
- Duration: 9:34
- Updated: 15 Apr 2009
- views: 496924
How to replace a water pump on any 3800 V6 engine.
Vehicle for demonstration is a 1989 Buick Lesabre
Works for any Buick, GM, Oldsmobile, or Pontiac with th...
How to replace a water pump on any 3800 V6 engine.
Vehicle for demonstration is a 1989 Buick Lesabre
Works for any Buick, GM, Oldsmobile, or Pontiac with the 3.8L 3800 V6.
Symptoms of water pump failure from least to most severe:
Coolant leak.
Engine rattling noise.
Serpentine belt falls off while driving.
wn.com/How To Water Pump Replacement Gm 3800 V6 ( Change Install For Chevy, Buick, Pontiac, Oldsmobile)
How to replace a water pump on any 3800 V6 engine.
Vehicle for demonstration is a 1989 Buick Lesabre
Works for any Buick, GM, Oldsmobile, or Pontiac with the 3.8L 3800 V6.
Symptoms of water pump failure from least to most severe:
Coolant leak.
Engine rattling noise.
Serpentine belt falls off while driving.
- published: 15 Apr 2009
- views: 496924
How To Replace The Head Gasket and Intake Manifold Gaskets On A GM 3800 Engine
- Order: Reorder
- Duration: 28:06
- Updated: 11 Jun 2013
- views: 123748
In this walkthrough I replace the head gaskets, upper intake manifold (UIM) gaskets, and lower intake manifold (LIM) gaskets on a 1997 pontiac bonneville. Thes...
In this walkthrough I replace the head gaskets, upper intake manifold (UIM) gaskets, and lower intake manifold (LIM) gaskets on a 1997 pontiac bonneville. These steps will be identical for almost any GM 3800 / 3400 / 3100 series II motor.
If you have any questions feel free to post them on the video and I'll do my best to try to help!
Here is a link to the the text walkthrough I used as a guide for making this video:
http://www.w-body.com/showthread.php/49858-Any-info-on-changing-series-2-3800-head-gaskets
Also here's a list of torque specs for most of the motor:
Camshaft Bolt: 74 ft/lbs + 90 degrees angle torque
Camshaft thrust plate: 132 in/lbs (T30 torx)
Front cover bolts: 15 ft/lbs + 40 degrees angle torque
Oil pan bolts: 125 in/lbs
Crank sensor nuts: 18 ft/lbs
Camshaft sensor bolts 48 in/lbs
Lifter hold-downs: 22 ft/lbs
Rocker bolts: 11 ft/lbs(132in/lbs) + 90 degrees angle torque
Lower intake bolts: 132 in/lbs
Supercharger bolts: 17ft/lbs
Crank Bolt: 111 ft/lbs + 76 degrees angle torque up to 10/98
111 ft/lbs +114 degrees angle torque 10/98 and up
Cylinder head bolts: 37 ft/lbs + 130 degrees + 30 degrees up to 10/98
37 ft/lbs + 120 degrees
Flywheel/flexplate bolts: 132 in/lbs + 50 degrees
Exhaust manifolds: stud/nuts 132 in/lbs
Nuts 156 in/lbs
Oil filter adapter to timing cover: 22 ft/lbs 97 earlier
132 in/lbs + 50 degrees 97 and later Oil pump
Cover to timing cover: 98 in/lbs
Pick up tube and screen: 132 in/lbs
Valve cover bolts: 89 in/lbs
Tstat bolts: 21 ft/lbs
Water Pump: 132 in/lbs + 80 degrees
Water pump pulley: 115 in/lbs
Throttle body: 84-89 in/lbs
Fuel rail nuts: 75-84 in/lbs
wn.com/How To Replace The Head Gasket And Intake Manifold Gaskets On A Gm 3800 Engine
In this walkthrough I replace the head gaskets, upper intake manifold (UIM) gaskets, and lower intake manifold (LIM) gaskets on a 1997 pontiac bonneville. These steps will be identical for almost any GM 3800 / 3400 / 3100 series II motor.
If you have any questions feel free to post them on the video and I'll do my best to try to help!
Here is a link to the the text walkthrough I used as a guide for making this video:
http://www.w-body.com/showthread.php/49858-Any-info-on-changing-series-2-3800-head-gaskets
Also here's a list of torque specs for most of the motor:
Camshaft Bolt: 74 ft/lbs + 90 degrees angle torque
Camshaft thrust plate: 132 in/lbs (T30 torx)
Front cover bolts: 15 ft/lbs + 40 degrees angle torque
Oil pan bolts: 125 in/lbs
Crank sensor nuts: 18 ft/lbs
Camshaft sensor bolts 48 in/lbs
Lifter hold-downs: 22 ft/lbs
Rocker bolts: 11 ft/lbs(132in/lbs) + 90 degrees angle torque
Lower intake bolts: 132 in/lbs
Supercharger bolts: 17ft/lbs
Crank Bolt: 111 ft/lbs + 76 degrees angle torque up to 10/98
111 ft/lbs +114 degrees angle torque 10/98 and up
Cylinder head bolts: 37 ft/lbs + 130 degrees + 30 degrees up to 10/98
37 ft/lbs + 120 degrees
Flywheel/flexplate bolts: 132 in/lbs + 50 degrees
Exhaust manifolds: stud/nuts 132 in/lbs
Nuts 156 in/lbs
Oil filter adapter to timing cover: 22 ft/lbs 97 earlier
132 in/lbs + 50 degrees 97 and later Oil pump
Cover to timing cover: 98 in/lbs
Pick up tube and screen: 132 in/lbs
Valve cover bolts: 89 in/lbs
Tstat bolts: 21 ft/lbs
Water Pump: 132 in/lbs + 80 degrees
Water pump pulley: 115 in/lbs
Throttle body: 84-89 in/lbs
Fuel rail nuts: 75-84 in/lbs
- published: 11 Jun 2013
- views: 123748
Clash of Clans - THIS IS CRAZY! "TOWN HALL 7 AT 3,800+ TROPHIES!" How did he do it?
- Order: Reorder
- Duration: 11:24
- Updated: 21 Mar 2015
- views: 897880
Clash of Clans Gameplay & Commentary! Do you like Clash of Clans? Yea you do! Since you like Clash of Clans, check out the links below for more!
WORLD'S FASTEST...
Clash of Clans Gameplay & Commentary! Do you like Clash of Clans? Yea you do! Since you like Clash of Clans, check out the links below for more!
WORLD'S FASTEST FREE GEMS! (CLICK HERE) - http://cashforap.ps/wite
Clash of Clans FREE GEMS! Click this link and use invite code "wite" for bonus points! http://www.getcashforapps.com
Instagram- btubehwd
T-Shirt Shop- https://www.teepublic.com/stores/mystlc7
CLICK HERE FOR MORE!- http://goo.gl/NhcznX
Add me on GooglePlus!- https://plus.google.com/+MYSTlC7
Appbounty Free Gems!- http://abo.io/Wite
Follow me on Twitter Here!- https://twitter.com/witelightingHWD
Intro Song: Alan Walker- Spectre
Outro song- "Sorry" by Dee Dot Jones
Music by Dee Dot Jones- http://www.datpiff.com/mixtapes-search.php
Contact Email: theoriginalmystic7@gmail.com
wn.com/Clash Of Clans This Is Crazy Town Hall 7 At 3,800 Trophies How Did He Do It
Clash of Clans Gameplay & Commentary! Do you like Clash of Clans? Yea you do! Since you like Clash of Clans, check out the links below for more!
WORLD'S FASTEST FREE GEMS! (CLICK HERE) - http://cashforap.ps/wite
Clash of Clans FREE GEMS! Click this link and use invite code "wite" for bonus points! http://www.getcashforapps.com
Instagram- btubehwd
T-Shirt Shop- https://www.teepublic.com/stores/mystlc7
CLICK HERE FOR MORE!- http://goo.gl/NhcznX
Add me on GooglePlus!- https://plus.google.com/+MYSTlC7
Appbounty Free Gems!- http://abo.io/Wite
Follow me on Twitter Here!- https://twitter.com/witelightingHWD
Intro Song: Alan Walker- Spectre
Outro song- "Sorry" by Dee Dot Jones
Music by Dee Dot Jones- http://www.datpiff.com/mixtapes-search.php
Contact Email: theoriginalmystic7@gmail.com
- published: 21 Mar 2015
- views: 897880
Terex Superlift 3800 Review
- Order: Reorder
- Duration: 24:34
- Updated: 11 Jul 2015
- views: 8016
review of the model
www.facebook.com/cranedude07
my instagram: @cranedude07
review of the model
www.facebook.com/cranedude07
my instagram: @cranedude07
wn.com/Terex Superlift 3800 Review
review of the model
www.facebook.com/cranedude07
my instagram: @cranedude07
- published: 11 Jul 2015
- views: 8016
Terex Superlift 3800 crawler crane jobsite debut!
- Order: Reorder
- Duration: 4:11
- Updated: 01 Jul 2013
- views: 21620
In the middle of the forest at the Hunsrück mountain range, Steil Kranarbeit used its brand new Terex Superlift 3800 crawler crane to erect a 135 m high Enercon...
In the middle of the forest at the Hunsrück mountain range, Steil Kranarbeit used its brand new Terex Superlift 3800 crawler crane to erect a 135 m high Enercon E-101 wind turbine.
wn.com/Terex Superlift 3800 Crawler Crane Jobsite Debut
"How To" GM 3800 V6 (3.8L) Starter replacement
- Order: Reorder
- Duration: 4:33
- Updated: 17 Jun 2013
- views: 157804
BE SURE TO DISCONNECT BATTERY SO YOU DO NOT BECOME BBQ! Also, it is always a good idea to replace the starter solenoid when you replace a starter. I have had th...
BE SURE TO DISCONNECT BATTERY SO YOU DO NOT BECOME BBQ! Also, it is always a good idea to replace the starter solenoid when you replace a starter. I have had the old solenoid catch fire on me when replacing a starter in an old ford truck before!
Please let me know if you have any questions... this should apply to most if not all Starters for 3.8L's. This car is a 1999 Oldsmobile Eighty Eight.
wn.com/How To Gm 3800 V6 (3.8L) Starter Replacement
BE SURE TO DISCONNECT BATTERY SO YOU DO NOT BECOME BBQ! Also, it is always a good idea to replace the starter solenoid when you replace a starter. I have had the old solenoid catch fire on me when replacing a starter in an old ford truck before!
Please let me know if you have any questions... this should apply to most if not all Starters for 3.8L's. This car is a 1999 Oldsmobile Eighty Eight.
- published: 17 Jun 2013
- views: 157804
Steil Using its Terex Cranes Superlift 3800 crawler crane for Some Heavy Lifting
- Order: Reorder
- Duration: 3:31
- Updated: 16 May 2014
- views: 11470
A crane's return on investment also depends on its versatility. This is another aspect where the Terex® Superlift 3800 lattice boom crawler crane is setting new...
A crane's return on investment also depends on its versatility. This is another aspect where the Terex® Superlift 3800 lattice boom crawler crane is setting new standards. Trier-based Steil Kranarbeiten GmbH & Co. KG used their Superlift 3800 crane to build a bridge in Luxemburg only two days after the same machine was used to erect a wind turbine in the Hunsrück mountain range.
wn.com/Steil Using Its Terex Cranes Superlift 3800 Crawler Crane For Some Heavy Lifting
A crane's return on investment also depends on its versatility. This is another aspect where the Terex® Superlift 3800 lattice boom crawler crane is setting new standards. Trier-based Steil Kranarbeiten GmbH & Co. KG used their Superlift 3800 crane to build a bridge in Luxemburg only two days after the same machine was used to erect a wind turbine in the Hunsrück mountain range.
- published: 16 May 2014
- views: 11470
GM 3800 Intake Manifold Replacement
- Order: Reorder
- Duration: 7:23
- Updated: 11 Oct 2011
- views: 73757
The plastic upper intake manifold goes bad on the 3800 series 2 motor. In this case I found coolant inside the air intake tube by the air filter (not good). T...
The plastic upper intake manifold goes bad on the 3800 series 2 motor. In this case I found coolant inside the air intake tube by the air filter (not good). The motor did give symptoms of problems like it would miss when idling for a long time and the check engine light would come on. The big red flag was that it would use coolant but no leaks. Also, oil was inside the intake manifold when the upper plastic was taken off. It will take a good couple of hours to do this job.
wn.com/Gm 3800 Intake Manifold Replacement
The plastic upper intake manifold goes bad on the 3800 series 2 motor. In this case I found coolant inside the air intake tube by the air filter (not good). The motor did give symptoms of problems like it would miss when idling for a long time and the check engine light would come on. The big red flag was that it would use coolant but no leaks. Also, oil was inside the intake manifold when the upper plastic was taken off. It will take a good couple of hours to do this job.
- published: 11 Oct 2011
- views: 73757
Diagnosing GM 3.3L 3300 / 3.8L 3800 Harmonic Balancer Problems
- Order: Reorder
- Duration: 3:59
- Updated: 28 Mar 2013
- views: 52198
In this video i will show you how to backyard diagnose harmonic balancer failure problems on GM 3300 3.3L, and 3800 3.8L engines. Very simple. The harmonic bal...
In this video i will show you how to backyard diagnose harmonic balancer failure problems on GM 3300 3.3L, and 3800 3.8L engines. Very simple. The harmonic balancer's are very failure prone on these engines. Enjoy!
wn.com/Diagnosing Gm 3.3L 3300 3.8L 3800 Harmonic Balancer Problems
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
9:58
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
Download the mp3 and pdf at http://www.mandarinchineseschool.com/free-online-lessons-with-...
published: 10 May 2011
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1
- Report rights infringement
- published: 10 May 2011
- views: 91742
5:30
3800 Yard Long Range Shot by HCR Team
On June 20th, 2015, Jim Spinella and the HCR team hit a 36” plate from a remarkable distan...
published: 18 Sep 2015
3800 Yard Long Range Shot by HCR Team
3800 Yard Long Range Shot by HCR Team
- Report rights infringement
- published: 18 Sep 2015
- views: 436273
10:06
3800 3.8L GM engine stalling issue quick fix
This is a first check if you have a GM vehicle with a 3800 engine that occasionally stalls...
published: 22 Nov 2013
3800 3.8L GM engine stalling issue quick fix
3800 3.8L GM engine stalling issue quick fix
- Report rights infringement
- published: 22 Nov 2013
- views: 102605
6:39
3800 Series 2 Modding Basics
Mods and Vendors list
www.zzperformance.com
Short Stack Intercooler
UD Water Pump Pul...
published: 04 Jan 2009
3800 Series 2 Modding Basics
3800 Series 2 Modding Basics
- Report rights infringement
- published: 04 Jan 2009
- views: 289766
22:35
Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
If you have a vehicle with the GM 3800 Engine which stalls randomly and may not always res...
published: 22 Nov 2013
Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
Crank Position Sensor Replacement - Stalling 3800 3.8 Engine
- Report rights infringement
- published: 22 Nov 2013
- views: 187608
7:09
パズドラ【3800万DLチャレダンLv10】ラオウPT
チャンネル登録をよろしくお願いします！
https://www.youtube.com/c/kosuke
ラオウ用のダンジョンとしか思えないレベル
ラオウお持ちの方は是非運用して...
published: 10 Nov 2015
パズドラ【3800万DLチャレダンLv10】ラオウPT
パズドラ【3800万DLチャレダンLv10】ラオウPT
- Report rights infringement
- published: 10 Nov 2015
- views: 589348
11:10
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
Does your car have trouble starting? Trouble idling? Lose the RPM Tach? This may be the re...
published: 03 Apr 2013
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Replacement Repair Fix
- Report rights infringement
- published: 03 Apr 2013
- views: 47429
8:21
8a+ à 3800
David Rastouil dans Digital Crack le 8a+ de l'Arête des Cosmiques dans le massif du Mont-B...
published: 28 Jan 2010
8a+ à 3800
8a+ à 3800
- Report rights infringement
- published: 28 Jan 2010
- views: 258535
8:01
2001 Buick Park Avenue Series 2 3800 Tips & Fixes
The series 2 3800 is almost invincible with proper engine maintenance. If you have a car ...
published: 31 May 2013
2001 Buick Park Avenue Series 2 3800 Tips & Fixes
2001 Buick Park Avenue Series 2 3800 Tips & Fixes
- Report rights infringement
- published: 31 May 2013
- views: 45431
12:22
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
This is the Cranes Etc TV review of Conrad's 1/50 scale model of the Terex Superlift 3800 ...
published: 16 Jan 2016
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
Conrad Terex Superlift 3800 Crawler Crane 'Bracht' by Cranes Etc TV
- Report rights infringement
- published: 16 Jan 2016
- views: 18581
5:16
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
Ploegen met een Claas Xerion 3800 en een Lemken Vari-Diamant 10, 9 schaar ploeg van Mts. v...
published: 09 Feb 2014
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenhuijzen/van Vugt / 2013 Part III [HD]
- Report rights infringement
- published: 09 Feb 2014
- views: 164132
19:45
How to Replace Power Steering Pump GM 3800
How to replace the power steering put on General Motor 3800 Engine.
published: 29 Sep 2014
How to Replace Power Steering Pump GM 3800
How to Replace Power Steering Pump GM 3800
- Report rights infringement
- published: 29 Sep 2014
- views: 73199
23:31
3800 Useful Chinese Sentences(常用汉语3,800句)5-1
http://www.mandarinchineseschool.com/free-online-lessons-with-audioesavideoes/31-3800-usef...
published: 19 Dec 2011
3800 Useful Chinese Sentences(常用汉语3,800句)5-1
3800 Useful Chinese Sentences(常用汉语3,800句)5-1
- Report rights infringement
- published: 19 Dec 2011
- views: 62279
4:18
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
http://www.1aauto.com/1A/SparkPlugWires/Buick/LeSabre/1AESW00040
1A Auto shows you how to ...
published: 28 Jun 2013
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
How To Install Replace Spark Plug Wires 1993-99 Buick Lesabre 3800 3.8L
- Report rights infringement
- published: 28 Jun 2013
- views: 35627
3800 Useful Chinese Sentences(常用汉语3,800句) _1_1...
3800 Yard Long Range Shot by HCR Team...
3800 3.8L GM engine stalling issue quick fix...
3800 Series 2 Modding Basics...
Crank Position Sensor Replacement - Stalling 3800 ...
パズドラ【3800万DLチャレダンLv10】ラオウPT...
2000 Pontiac Bonneville SSEI 3800 Crank Sensor Rep...
8a+ à 3800...
2001 Buick Park Avenue Series 2 3800 Tips & Fixes...
Conrad Terex Superlift 3800 Crawler Crane 'Bracht'...
Claas Xerion 3800 + Lemken 9 Furrow - van Nieuwenh...
How to Replace Power Steering Pump GM 3800...
3800 Useful Chinese Sentences(常用汉语3,800句)5-1...
How To Install Replace Spark Plug Wires 1993-99 Bu...
How To: Water Pump Replacement GM 3800 V6 ( Change...
How To Replace The Head Gasket and Intake Manifold...
Clash of Clans - THIS IS CRAZY! "TOWN HALL 7 AT 3,...
Terex Superlift 3800 Review...
Terex Superlift 3800 crawler crane jobsite debut!...
"How To" GM 3800 V6 (3.8L) Starter replacement...
Steil Using its Terex Cranes Superlift 3800 crawle...
GM 3800 Intake Manifold Replacement...
Diagnosing GM 3.3L 3300 / 3.8L 3800 Harmonic Balan...
photo: US Army / Corps of Engineers
Mosul dam engineers warn it could fail at any time, killing 1m people
Edit The Guardian 02 Mar 2016
Iraqis who built dam say structure is increasingly precarious and describe government response as ‘ridiculous’. Iraqi engineers involved in building the Mosul dam 30 years ago have warned that the risk of its imminent collapse and the consequent death toll could be even worse than reported ... Related. Iraqi PM and US issue warnings over threat of Mosul dam collapse ... “The machines for grouting have been looted. There is no cement supply ... ....
photo: AP / John Minchillo
Report: Trump Off-The-Record Audio Remarks Could Derail His Campaign If Revealed
Edit WorldNews.com 02 Mar 2016
Republican frontrunner Donald Trump has substantially added to his delegate lead following Super Tuesday wins and moved closer to his goal of clinching the Republican presidential nomination. As his Republican presidential rivals fall further behind, news comes from Buzzfeed News via Inquisitr of a bombshell New York Times secret audio tape that could ultimately derail his campaign if it were to be released to the public....
photo: AP
'Allah ordered' Moscow nanny to sever girl's head, Russia court told
Edit Sydney Morning Herald 02 Mar 2016photo: AP / Steve Nesius
What would a President Trump mean for the world?
Edit CNN 02 Mar 2016
(CNN)It's hardly a certainty, but it's now a real and startling possibility -- what should the world expect if Donald Trump is elected U.S. president?. America's most unpredictable candidate could turn into America's most unpredictable commander-in-chief. "We're not going to be the dummies anymore," he told supporters after he won the Nevada primary. "We're going to be the smart ones.". READ ... Read More ... READ ... Trump vows to champion U.S ... ISIS....
photo: WN / Yolanda Leyba
Scientists Gain Understanding Of Genes That Cause Hair Color, Baldness and Graying
Edit WorldNews.com 02 Mar 2016
The age-old issue of losing, controlling, thickness and removing unwanted hair may have taken a huge step forward as scientists at University College London have found the gray hair gene, according to multiple media reports ... The human genes that control our hair has evolved with us, but evolved differently among different human groups. You rarely see people with naturally straight hair in sub-Saharan Africa, for instance....
« back to news headlines
Man stabbed to death in West Garfield Park
Edit Chicago Sun-Times 02 Mar 2016
Brown, who lived in the 3800 block of West Adams, was pronounced dead at the scene less than 30 minutes ......
Marco Rubio plans presidential rally Saturday in Jacksonville
Edit The Florida Times Union 02 Mar 2016
GOP presidential candidate Marco Rubio will host a rally in Jacksonville this weekend. Rubio will lead the rally at 2.30 p.m. Saturday at the Morocco Shrine Auditorium. The rally is expected to run 45 minutes as Rubio shares "his vision for A New American Century.". Doors will open at 1.30 p.m. Each attendee must register online prior to the event ... The Morocco Shrine Auditorium is located at 3800 St. Johns Bluff Road South. read more ... ....
The European Investment Trust plc – Director/PDMR Shareholding (The European Investment Trust plc)
Edit Public Technologies 02 Mar 2016
(Source. The European Investment Trust plc) The European Investment Trust The European Investment Trust plc (the "Company") ... 2 March 2016. Enquiries. Kenneth J Greig ... 0131 270 3800 ... Beaufort House ... Original Document.....
Advisory: Emergency Water Main Shutdown (City of Hialeah, FL)
Edit Public Technologies 02 Mar 2016
(Source. City of Hialeah, FL) (Hialeah, Florida, March 1, 2016) ... A rolling boil of one minute is sufficient ... Should you have any questions, please contact the Public Works, Customer Service Department at 305-556-3800 ... North. E 52 Street. South ... East....
EP Global Opportunities Trust plc – Total Voting Rights as at 29 February 2016 (EP Global Opportunities Trust plc)
Edit Public Technologies 02 Mar 2016
(Source. EP Global Opportunities Trust plc) MONTANARO UK SMALLER COMPANIES INVESTMENT TRUST PLC. EP Global Opportunities Trust plc (the "Company") Total Voting Rights ... Class of share. Total number of shares in circulation. Number of voting rights attached to each share ... Ordinary 1p Shares ... 1 ... 0131 270 3800....
Booker Arts Magnet Student to Receive Inaugural Love Your School Award (City of Little Rock, AR)
Edit Public Technologies 02 Mar 2016
(Source. City of Little Rock, AR). « Back to Media Releases. City of Little Rock Public Relations. Office (501) 371-4421. Contact(s).Jennifer Godwin . (o) 501 371 4421 . (c) 501 804 4822. FOR IMMEDIATE RELEASE .. Tuesday, March 1, 2016. WHAT ... WHO.Mark Stodola, mayor, City of Little Rock. Mr. Ken Goodson, Regional Director, Denver Southwest Regional Campus. Dr ... Dr ... WHERE. Booker Arts Magnet 2016 Barber Street Little Rock AR 72206 501-447-3800. WHEN ... 8....
High school scores, summaries and schedules — Feb. 29
Edit Ohio 01 Mar 2016
REPORTING
SCORES. Schools are encouraged to report scores by email at bjsports@thebeaconjournal.com, by fax at 330-996-3629 or by phone at 330-996-3800. Please report scores from home and away games and from wins and losses and include statistics from both teams. Let your athletic director and coach know if you do not see your school’s result ... ....
US diplomat slams NZ embassy staff
Edit Otago Daily Times 01 Mar 2016
Lawyer David Huebner was US Ambassador to New Zealand and Samoa from late 2009 until 2014, and was replaced by the current ambassador, Mark Gilbert ... It has now been released by the State Department, which completed its release of Clinton's emails overnight, posting the final 3800 pages to its website just hours before Super Tuesday, when voters in 12 states will vote for a potential presidential candidate ... . NZME. ....
Vote By Mail! (Florida Democratic Party)
Edit Public Technologies 01 Mar 2016
(Source. Florida Democratic Party). If you are registered to vote in one of these counties, you can now vote early in Florida's Presidential Primary. County Address Dates Time. Baker 32 N 5th Street, Suite A, Macclenny February 29-March 12 9am-5pm. Calhoun 20859 Central Ave. E. Rm. 117, Blountstown February 29-March 12 8am-5.30pm ... DeSoto 201 E ... 8am-6pm, Sat-Sun. 7am-3pm ... 315 W ... 3800 S Econlockhatchee Trail, Orlando February 29-March 13 10am-6pm....
Fatal Crash at 3800 North Loop East (Houston Police Department)
Edit Public Technologies 29 Feb 2016
(Source. Houston Police Department). Fatal Crash at 3800 North Loop East. February 29, 2016- Houston police are investigating a fatal crash at 3800 North Loop East (North Interstate Highway 610 East) about 12.20 a.m. on Saturday (Feb. 27) ... HPD Vehicular Crimes Division Sergeant A ... Singleton reported.....
SCPD Police Blotter - Week of 2/21/16 (City of Santa Clara, CA)
Edit Public Technologies 29 Feb 2016
(Source. City of Santa Clara, CA). Sunday, February 21, 2016. Petty Theft - Location. 5000 Block of Great America Parkway. A female victim had her wallet taken from her purse when it was temporarily left unattended at a trade show ... The suspect(s) remain at large. Time. 1951. Case Number. 16-50346. Monday, February 22, 2016 ... 3800 Block of Thrush Court. An officer was dispatched to the 3800 block of Thrush Court to investigate an identity theft....
Juvenile Suspect Arrested in Graffiti Series (City of Irvine, CA)
Edit Public Technologies 29 Feb 2016
(Source. City of Irvine, CA) ... The suspect, a 17-year-old Irvine resident, was arrested after a search warrant was served in the 3800 block of Parkview in Irvine ... The incidents occurred along freeway easements, bike trails and in public parks ... ### ... Original Document ... (noodl. 32375693) ....
- 1
- 2
- 3
- 4
- 5
- Next page »
