This video from Sears PartsDirect shows you how to check continuity on wires and electrical parts using a multimeter. Testing continuity can tell you whether electrical current is making it all the way though a circuit. It can also help identify whether a wire is creating a short circuit to the metal frame, a potentially dangerous situation. Visit us at http://www.searspartsdirect.com?sid=soc:youtube:paid-continuity Or call 1-800-437-1673 to speak with a parts specialist. Parts featured in this video include: Multimeter http://www.searspartsdirect.com/part-number/82141/0034/034.html?sid=soc:youtube:paid-continuity-partlink Transcript: Hi, my name is Wayne from Sears PartsDirect. Today we're going to talk about checking wire continuity using a multimeter. If one of your appliances isn’t working, a break in the wires may be to blame. Checking continuity allows you to test whether or not current is making it all the way though a wire. First unplug your appliance. To avoid electric shocks, all continuity checks must be conducted with the appliance unplugged. If an electrical part is connected to the wire, the easiest way to check for continuity is though the entire circuit, because both ends of the circuit will be connected to the control board. Access the control board. Trace the wires back to the board and measure resistance though the circuit you want to check. For example, the resistance through a bake element in this range is 15 ohms. If you measure 15 ohms, then you know that all the wires have continuity. You can find the correct resistance value in the appliance’s tech sheet, or by measuring resistance directly at the part. If the meter shows 1 in the far left digit, or on some meters “OL”, it means that you have an open circuit and power is not making it all the way though. You either have a break in the wires or the electrical component is broken. Before you replace that part, you need to check the individual wires for a break in continuity. To check continuity on a run of wiring, disconnect both ends of the wire. Set your multimeter to check continuity with a tone. Put one meter lead on one end of the wire and the other meter lead on the opposite end of the wire. The meter signals a tone and shows near zero ohms of resistance if the wire has continuity. After checking continuity on the wire you should also check for continuity from that wire to the metal frame. Sometimes a bare or damaged wire can make contact with the metal cabinet on an appliance, dissipating potentially dangerous levels of current, which could shock or kill. If you ever see continuity between a wire and the metal frame, DO NOT plug the appliance back in until all wires have been repaired. Now, if you see something like this, obviously you know that’s something you’re going to want to repair. You can repair the wire by splicing it in that location. Cut the wire and strip 1/4" of insulation off the wire ends. Reattach the wires using an appropriate wire nut or connector. Make sure that no strands of bare wire are exposed after repairing the wire. If the wire is used on a range or oven, connect the wires using a ceramic wire nut properly rated for heat. Ceramic wire nuts with a temperature rating of 200 C are used on most ranges and ovens. If the splice would shorten the wire so much that it no longer fits, splice in a new length of correctly rated wire. Always check the continuity of the wire you repaired before reassembling the appliance. Well I hope that this video helped you out today. Be sure to check out our other videos, on the YouTube Channel, and if you like them, subscribe.

• published: 21 Aug 2015
• views: 46610