Electrochemistry is a branch of chemistry that studies chemical reactions which take place in a solution at the interface of an electron conductor (a metal or a semiconductor) and an ionic conductor (the electrolyte), and which involve electron transfer between the electrode and the electrolyte or species in solution.

If a chemical reaction is driven by an external applied voltage, as in electrolysis, or if a voltage is created by a chemical reaction as in a battery, it is an ''electrochemical'' reaction. In contrast, chemical reactions where electrons are transferred between molecules are called oxidation/reduction (redox) reactions. In general, electrochemistry deals with situations where oxidation and reduction reactions are separated in space or time, connected by an external electric circuit.

History[link]

16th to 18th century developments[link]

Understanding of electrical matters began in the sixteenth century. During this century the English scientist William Gilbert spent 17 years experimenting with magnetism and, to a lesser extent, electricity. For his work on magnets, Gilbert became known as the ''"Father of Magnetism."'' He discovered various methods for producing and strengthening magnets.

In 1663 the German physicist Otto von Guericke created the first electric generator, which produced static electricity by applying friction in the machine. The generator was made of a large sulfur ball cast inside a glass globe, mounted on a shaft. The ball was rotated by means of a crank and a static electric spark was produced when a pad was rubbed against the ball as it rotated. The globe could be removed and used as source for experiments with electricity.

By the mid—18th century the French chemist Charles François de Cisternay du Fay had discovered two types of static electricity, and that like charges repel each other whilst unlike charges attract. Du Fay announced that electricity consisted of two fluids: ''"vitreous"'' (from the Latin for ''"glass"''), or positive, electricity; and ''"resinous,"'' or negative, electricity. This was the ''two-fluid theory'' of electricity, which was to be opposed by Benjamin Franklin's ''one-fluid theory'' later in the century.

Charles-Augustin de Coulomb developed the law of electrostatic attraction in 1785 as an outgrowth of his attempt to investigate the law of electrical repulsions as stated by Joseph Priestley in England. In the late 18th century the Italian physician and anatomist Luigi Galvani marked the birth of electrochemistry by establishing a bridge between chemical reactions and electricity on his essay ''"De Viribus Electricitatis in Motu Musculari Commentarius"'' (Latin for Commentary on the Effect of Electricity on Muscular Motion) in 1791 where he proposed a ''"nerveo-electrical substance"'' on biological life forms.

In his essay Galvani concluded that animal tissue contained a here-to-fore neglected innate, vital force, which he termed ''"animal electricity,"'' which activated nerves and muscles spanned by metal probes. He believed that this new force was a form of electricity in addition to the ''"natural"'' form produced by lightning or by the electric eel and torpedo ray as well as the ''"artificial"'' form produced by friction (i.e., static electricity).

Galvani's scientific colleagues generally accepted his views, but Alessandro Volta rejected the idea of an ''"animal electric fluid,"'' replying that the frog's legs responded to differences in metal temper, composition, and bulk. Galvani refuted this by obtaining muscular action with two pieces of the same material.

19th century[link]

In 1800, William Nicholson and Johann Wilhelm Ritter succeeded in decomposing water into hydrogen and oxygen by electrolysis. Soon thereafter Ritter discovered the process of electroplating. He also observed that the amount of metal deposited and the amount of oxygen produced during an electrolytic process depended on the distance between the electrodes. By 1801 Ritter observed thermoelectric currents and anticipated the discovery of thermoelectricity by Thomas Johann Seebeck.

By the 1810s William Hyde Wollaston made improvements to the galvanic cell. Sir Humphry Davy's work with electrolysis led to the conclusion that the production of electricity in simple electrolytic cells resulted from chemical action and that chemical combination occurred between substances of opposite charge. This work led directly to the isolation of sodium and potassium from their compounds and of the alkaline earth metals from theirs in 1808.

Hans Christian Ørsted's discovery of the magnetic effect of electrical currents in 1820 was immediately recognized as an epoch-making advance, although he left further work on electromagnetism to others. André-Marie Ampère quickly repeated Oestred's experiment, and formulated them mathematically.

In 1821, Estonian-German physicist Thomas Johann Seebeck demonstrated the electrical potential in the juncture points of two dissimilar metals when there is a heat difference between the joints.

In 1827, the German scientist Georg Ohm expressed his law in this famous book ''"Die galvanische Kette, mathematisch bearbeitet"'' (The Galvanic Circuit Investigated Mathematically) in which he gave his complete theory of electricity.

In 1832, Michael Faraday's experiments led him to state his two laws of electrochemistry. In 1836, John Daniell invented a primary cell in which hydrogen was eliminated in the generation of the electricity. Daniell had solved the problem of polarization. Later results revealed that alloying the amalgamated zinc with mercury would produce a better voltage. William Grove produced the first fuel cell in 1839. In 1846, Wilhelm Weber developed the electrodynamometer. In 1868, Georges Leclanché patented a new cell which eventually became the forerunner to the world's first widely used battery, the zinc carbon cell.

Svante Arrhenius published his thesis in 1884 on ''Recherches sur la conductibilité galvanique des électrolytes'' (Investigations on the galvanic conductivity of electrolytes). From his results the author concluded that electrolytes, when dissolved in water, become to varying degrees split or dissociated into electrically opposite positive and negative ions.

In 1886, Paul Héroult and Charles M. Hall developed an efficient method (the Hall–Héroult process) to obtain aluminium using electrolysis of molten alumina.

In 1894, Friedrich Ostwald concluded important studies of the conductivity and electrolytic dissociation of organic acids. Walther Hermann Nernst developed the theory of the electromotive force of the voltaic cell in 1888. In 1889, he showed how the characteristics of the current produced could be used to calculate the free energy change in the chemical reaction producing the current. He constructed an equation, known as Nernst equation, which related the voltage of a cell to its properties.

In 1898, Fritz Haber showed that definite reduction products can result from electrolytic processes if the potential at the cathode is kept constant. In 1898, he explained the reduction of nitrobenzene in stages at the cathode and this became the model for other similar reduction processes.

20th century and recent developments[link]

In 1902, The Electrochemical Society (ECS) was founded.

In 1909, Robert Andrews Millikan began a series of experiments to determine the electric charge carried by a single electron.

In 1923, Johannes Nicolaus Brønsted and Martin Lowry published essentially the same theory about how acids and bases behave, using an electrochemical basis.

Arne Tiselius developed the first sophisticated electrophoretic apparatus in 1937 and some years later he was awarded the 1948 Nobel Prize for his work in protein electrophoresis.

A year later, in 1949, the International Society of Electrochemistry (ISE) was founded.

By the 1960s–1970s quantum electrochemistry was developed by Revaz Dogonadze and his pupils.

Principles[link]

Redox reactions[link]

Redox stands for reduction-oxidation, and are electrochemical processes involving electron transfer to or from a molecule or ion changing its oxidation state. This reaction can occur through the application of an external voltage or through the release of chemical energy.

Oxidation and reduction[link]

Oxidation and reduction describe the change of oxidation state that takes place in the atoms, ions or molecules involved in an electrochemical reaction. Formally, oxidation state is the hypothetical charge that an atom would have if all bonds to atoms of different elements were 100% ionic. An atom or ion that gives up an electron to another atom or ion has its oxidation state increase, and the recipient of the negatively charged electron has its oxidation state decrease. Oxidation and reduction always occur in a paired fashion such that one species is oxidized when another is reduced. This paired electron transfer is called a redox reaction.

For example, when atomic sodium reacts with atomic chlorine, sodium donates one electron and attains an oxidation state of +1. Chlorine accepts the electron and its oxidation state is reduced to −1. The sign of the oxidation state (positive/negative) actually corresponds to the value of each ion's electronic charge. The attraction of the differently charged sodium and chlorine ions is the reason they then form an ionic bond.

The loss of electrons from an atom or molecule is called oxidation, and the gain of electrons is reduction. This can be easily remembered through the use of mnemonic devices. Two of the most popular are ''"OIL RIG"'' (Oxidation Is Loss, Reduction Is Gain) and ''"LEO"'' the lion says ''"GER"'' (Lose Electrons: Oxidization, Gain Electrons: Reduction). For cases where electrons are shared (covalent bonds) between atoms with large differences in electronegativity, the electron is assigned to the atom with the largest electronegativity in determining the oxidation state.

The atom or molecule which loses electrons is known as the ''reducing agent'', or ''reductant'', and the substance which accepts the electrons is called the ''oxidizing agent'', or ''oxidant''. The oxidizing agent is always being reduced in a reaction; the reducing agent is always being oxidized. Oxygen is a common oxidizing agent, but not the only one. Despite the name, an oxidation reaction does not necessarily need to involve oxygen. In fact, a fire can be fed by an oxidant other than oxygen; fluorine fires are often unquenchable, as fluorine is an even stronger oxidant (it has a higher electronegativity) than oxygen.

For reactions involving oxygen, the gain of oxygen implies the oxidation of the atom or molecule to which the oxygen is added (and the oxygen is reduced). In organic compounds, such as butane or ethanol, the loss of hydrogen implies oxidation of the molecule from which it is lost (and the hydrogen is reduced). This follows because the hydrogen donates its electron in covalent bonds with non-metals but it takes the electron along when it is lost. Conversely, loss of oxygen or gain of hydrogen implies reduction.

Balancing redox reactions[link]

Electrochemical reactions in water are better understood by balancing redox reactions using the ion-electron method where H⁺, OH^– ion, H₂O and electrons (to compensate the oxidation changes) are added to cell's half-reactions for oxidation and reduction.

Acidic medium[link]

In acid medium H⁺ ions and water are added to half-reactions to balance the overall reaction. For example, when manganese reacts with sodium bismuthate. :''Unbalanced reaction'': Mn²⁺(aq) + NaBiO₃(s) → Bi³⁺(aq) + MnO₄^–(aq) :''Oxidation'': 4 H₂O(l) + Mn²⁺(aq) → MnO₄^–(aq) + 8 H⁺(aq) + 5 e^– :''Reduction'': 2 e^– + 6 H⁺(aq) + BiO₃^–(s) → Bi³⁺(aq) + 3 H₂O(l)

Finally, the reaction is balanced by multiplying the number of electrons from the reduction half reaction to oxidation half reaction and vice versa and adding both half reactions, thus solving the equation. :8 H₂O(l) + 2 Mn²⁺(aq) → 2 MnO₄^–(aq) + 16 H⁺(aq) + 10 e^– :10 e^– + 30 H⁺(aq) + 5 BiO₃^–(s) → 5 Bi³⁺(aq) + 15 H₂O(l) Reaction balanced: :14 H⁺(aq) + 2 Mn²⁺(aq) + 5 NaBiO₃(s) → 7 H₂O(l) + 2 MnO₄^–(aq) + 5 Bi³⁺(aq) + 5 Na⁺(aq)

Basic medium[link]

In basic medium OH^– ions and water are added to half reactions to balance the overall reaction. For example, on reaction between potassium permanganate and sodium sulfite. :''Unbalanced reaction'': KMnO₄ + Na₂SO₃ + H₂O → MnO₂ + Na₂SO₄ + KOH :''Reduction'': 3 e^– + 2 H₂O + MnO₄^– → MnO₂ + 4 OH^– :''Oxidation'': 2 OH^– + SO₃^2– → SO₄^2– + H₂O + 2 e^–

The same procedure as followed on acid medium by multiplying electrons to opposite half reactions solve the equation thus balancing the overall reaction. :6 e^– + 4 H₂O + 2 MnO₄^– → 2 MnO₂ + 8 OH^– :6 OH^– + 3 SO₃^2– → 3 SO₄^2– + 3 H₂O + 6e^– Equation balanced: :2 KMnO₄ + 3 Na₂SO₃ + H₂O → 2 MnO₂ + 3 Na₂SO₄ + 2 KOH

Neutral medium[link]

The same procedure as used on acid medium is applied, for example on balancing using electron ion method to complete combustion of propane. :''Unbalanced reaction'': C₃H₈ + O₂ → CO₂ + H₂O :''Reduction'': 4 H⁺ + O₂ + 4 e^– → 2 H₂O :''Oxidation'': 6 H₂O + C₃H₈ → 3 CO₂ + 20 e^– + 20 H⁺

As in acid and basic medium, electrons which were used to compensate oxidation changes are multiplied to opposite half reactions, thus solving the equation. :20 H⁺ + 5 O₂ + 20 e^– → 10 H₂O :6 H₂O + C₃H₈ → 3 CO₂ + 20 e^– + 20 H⁺ Equation balanced: :C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O

Electrochemical cells[link]

An electrochemical cell is a device that produces an electric current from energy released by a spontaneous redox reaction. This kind of cell includes the Galvanic cell or Voltaic cell, named after Luigi Galvani and Alessandro Volta, both scientists who conducted several experiments on chemical reactions and electric current during the late 18th century.

Electrochemical cells have two conductive electrodes (the anode and the cathode). The anode is defined as the electrode where oxidation occurs and the cathode is the electrode where the reduction takes place. Electrodes can be made from any sufficiently conductive materials, such as metals, semiconductors, graphite, and even conductive polymers. In between these electrodes is the electrolyte, which contains ions that can freely move.

The galvanic cell uses two different metal electrodes, each in an electrolyte where the positively charged ions are the oxidized form of the electrode metal. One electrode will undergo oxidation (the anode) and the other will undergo reduction (the cathode). The metal of the anode will oxidize, going from an oxidation state of 0 (in the solid form) to a positive oxidation state and become an ion. At the cathode, the metal ion in solution will accept one or more electrons from the cathode and the ion's oxidation state is reduced to 0. This forms a solid metal that electrodeposits on the cathode. The two electrodes must be electrically connected to each other, allowing for a flow of electrons that leave the metal of the anode and flow through this connection to the ions at the surface of the cathode. This flow of electrons is an electrical current that can be used to do work, such as turn a motor or power a light.

A galvanic cell whose electrodes are zinc and copper submerged in zinc sulfate and copper sulfate, respectively, is known as a Daniell cell.

Half reactions for a Daniell cell are these: :Zinc electrode (anode): Zn(s) → Zn²⁺(aq) + 2 e^– :Copper electrode (cathode): Cu²⁺(aq) + 2 e^– → Cu(s)

In this example, the anode is zinc metal which oxidizes (loses electrons) to form zinc ions in solution, and copper ions accept electrons from the copper metal electrode and the ions deposit at the copper cathode as an electrodeposit. This cell forms a simple battery as it will spontaneously generate a flow of electrical current from the anode to the cathode through the external connection. This reaction can be driven in reverse by applying a voltage, resulting in the deposition of zinc metal at the anode and formation of copper ions at the cathode.

To provide a complete electric circuit, there must also be an ionic conduction path between the anode and cathode electrolytes in addition to the electron conduction path. The simplest ionic conduction path is to provide a liquid junction. To avoid mixing between the two electrolytes, the liquid junction can be provided through a porous plug that allows ion flow while reducing electrolyte mixing. To further minimize mixing of the electrolytes, a salt bridge can be used which consists of an electrolyte saturated gel in an inverted U-tube. As the negatively charged electrons flow in one direction around this circuit, the positively charged metal ions flow in the opposite direction in the electrolyte.

A voltmeter is capable of measuring the change of electrical potential between the anode and the cathode.

Electrochemical cell voltage is also referred to as electromotive force or emf.

A cell diagram can be used to trace the path of the electrons in the electrochemical cell. For example, here is a cell diagram of a Daniell cell: :Zn(s) | Zn²⁺ (1M) || Cu²⁺ (1M) | Cu(s)

First, the reduced form of the metal to be oxidized at the anode (Zn) is written. This is separated from its oxidized form by a vertical line, which represents the limit between the phases (oxidation changes). The double vertical lines represent the saline bridge on the cell. Finally, the oxidized form of the metal to be reduced at the cathode, is written, separated from its reduced form by the vertical line. The electrolyte concentration is given as it is an important variable in determining the cell potential.

Standard electrode potential[link]

To allow prediction of the cell potential, tabulations of standard electrode potential are available. Such tabulations are referenced to the standard hydrogen electrode (SHE). The standard hydrogen electrode undergoes the reaction :2 H⁺(aq) + 2 e^– → H₂ which is shown as reduction but, in fact, the SHE can act as either the anode or the cathode, depending on the relative oxidation/reduction potential of the other electrode/electrolyte combination. The term standard in SHE requires a supply of hydrogen gas bubbled through the electrolyte at a pressure of 1 atm and an acidic electrolyte with H⁺ activity equal to 1 (usually assumed to be [H⁺] = 1 mol/liter).

The SHE electrode can be connected to any other electrode by a salt bridge to form a cell. If the second electrode is also at standard conditions, then the measured cell potential is called the standard electrode potential for the electrode. The standard electrode potential for the SHE is zero, by definition. The polarity of the standard electrode potential provides information about the relative reduction potential of the electrode compared to the SHE. If the electrode has a positive potential with respect to the SHE, then that means it is a strongly reducing electrode which forces the SHE to be the anode (an example is Cu in aqueous CuSO₄ with a standard electrode potential of 0.337 V). Conversely, if the measured potential is negative, the electrode is more oxidizing than the SHE (such as Zn in ZnSO₄ where the standard electrode potential is −0.76 V).

Standard electrode potentials are usually tabulated as reduction potentials. However, the reactions are reversible and the role of a particular electrode in a cell depends on the relative oxidation/reduction potential of both electrodes. The oxidation potential for a particular electrode is just the negative of the reduction potential. A standard cell potential can be determined by looking up the standard electrode potentials for both electrodes (sometimes called half cell potentials). The one that is smaller will be the anode and will undergo oxidation. The cell potential is then calculated as the sum of the reduction potential for the cathode and the oxidation potential for the anode.

:E°_cell = E°_red(cathode) – E°_red(anode) = E°_red(cathode) + E°_oxi(anode)

For example, the standard electrode potential for a copper electrode is:

:''Cell diagram'' :Pt(s) | H₂(1 atm) | H⁺(1 M) || Cu²⁺ (1 M) | Cu(s) :E°_cell = E°_red(cathode) – E°_red(anode)

At standard temperature, pressure and concentration conditions, the cell's emf (measured by a multimeter) is 0.34 V. By definition, the electrode potential for the SHE is zero. Thus, the Cu is the cathode and the SHE is the anode giving :E_cell = E°(Cu²⁺/Cu) – E°(H⁺/H₂) Or, :E°(Cu²⁺/Cu) = 0.34 V

Changes in the stoichiometric coefficients of a balanced cell equation will not change E°_red value because the standard electrode potential is an intensive property.

Spontaneity of redox reaction[link]

During operation of electrochemical cells, chemical energy is transformed into electrical energy and is expressed mathematically as the product of the cell's emf and the electric charge transferred through the external circuit. :Electrical energy = E_cellC_trans where E_cell is the cell potential measured in volts (V) and C_trans is the cell current integrated over time and measured in coulombs (C); C_trans can also be determined by multiplying the total number of electrons transferred (measured in moles) times Faraday's constant (F).

The emf of the cell at zero current is the maximum possible emf. It is used to calculate the maximum possible electrical energy that could be obtained from a chemical reaction. This energy is referred to as electrical work and is expressed by the following equation:

:W_max = W_electrical = –nF·E_cell, where work is defined as positive into the system.

Since the free energy is the maximum amount of work that can be extracted from a system, one can write: :ΔG = –nF·E_cell

A positive cell potential gives a negative change in Gibbs free energy. This is consistent with the cell production of an electric current from the cathode to the anode through the external circuit. If the current is driven in the opposite direction by imposing an external potential, then work is done on the cell to drive electrolysis.

A spontaneous electrochemical reaction (change in Gibbs free energy less than zero) can be used to generate an electric current in electrochemical cells. This is the basis of all batteries and fuel cells. For example, gaseous oxygen (O₂) and hydrogen (H₂) can be combined in a fuel cell to form water and energy, typically a combination of heat and electrical energy.

Conversely, non-spontaneous electrochemical reactions can be driven forward by the application of a current at sufficient voltage. The electrolysis of water into gaseous oxygen and hydrogen is a typical example.

The relation between the equilibrium constant, ''K'', and the Gibbs free energy for an electrochemical cell is expressed as follows:

:ΔG° = –RT ln(K) = –nF·E°_cell

Rearranging to express the relation between standard potential and equilibrium constant yields

:$\backslash mbox\{E\}^\{o\}\_\{cell\}=\{\backslash mbox\{RT\}\; \backslash over\; \backslash mbox\{nF\}\}\; \backslash mbox\{ln\; K\}\backslash ,$. The previous equation can use Briggsian logarithm as shown below: :$\backslash mbox\{E\}^\{o\}\_\{cell\}=\{0.0591\; \backslash mbox\{V\}\; \backslash over\; \backslash mbox\{n\}\}\; \backslash mbox\{log\; K\}\backslash ,$

Cell emf dependency on changes in concentration[link]

Nernst equation[link]

The standard potential of an electrochemical cell requires standard conditions for all of the reactants. When reactant concentrations differ from standard conditions, the cell potential will deviate from the standard potential. In the 20th century German chemist Walther Nernst proposed a mathematical model to determine the effect of reactant concentration on electrochemical cell potential.

In the late 19th century, Josiah Willard Gibbs had formulated a theory to predict whether a chemical reaction is spontaneous based on the free energy

:ΔG = ΔG° + RT·ln(Q)

Here ''ΔG'' is change in Gibbs free energy, ''T'' is absolute temperature, ''R'' is the gas constant and ''Q'' is reaction quotient.

Gibbs' key contribution was to formalize the understanding of the effect of reactant concentration on spontaneity.

Based on Gibbs' work, Nernst extended the theory to include the contribution from electric potential on charged species. As shown in the previous section, the change in Gibbs free energy for an electrochemical cell can be related to the cell potential. Thus, Gibbs' theory becomes

:nFΔE = nFΔE° – RT ln(Q)

Here ''n'' is the number of electrons/mole product, ''F'' is the Faraday constant (coulombs/mole), and ''ΔE'' is cell potential.

Finally, Nernst divided through by the amount of charge transferred to arrive at a new equation which now bears his name: :ΔE = ΔE° – (RT/nF)ln(Q)

Assuming standard conditions (T = 25 °C) and R = 8.3145 J/(K·mol), the equation above can be expressed on base—10 logarithm as shown below: :$\backslash Delta\; E=\backslash Delta\; E^\{o\}-\; \{\backslash mbox\{0.05916\; V\}\; \backslash over\; \backslash mbox\{n\}\}\; \backslash mbox\{log\; Q\}\backslash ,$

Concentration cells[link]

A concentration cell is an electrochemical cell where the two electrodes are the same material, the electrolytes on the two half-cells involve the same ions, but the electrolyte concentration differs between the two half-cells.

For example an electrochemical cell, where two copper electrodes are submerged in two copper(II) sulfate solutions, whose concentrations are 0.05 M and 2.0 M, connected through a salt bridge. This type of cell will generate a potential that can be predicted by the Nernst equation. Both electrodes undergo the same chemistry (although the reaction proceeds in reverse at the cathode)

:Cu²⁺(aq) + 2 e^– → Cu(s)

Le Chatelier's principle indicates that the reaction is more favorable to reduction as the concentration of Cu²⁺ ions increases. Reduction will take place in the cell's compartment where concentration is higher and oxidation will occur on the more dilute side.

The following cell diagram describes the cell mentioned above: :Cu(s) | Cu²⁺ (0.05 M) || Cu²⁺ (2.0 M) | Cu(s) Where the half cell reactions for oxidation and reduction are: :''Oxidation'': Cu(s) → Cu²⁺ (0.05 M) + 2 e^– :''Reduction'': Cu²⁺ (2.0 M) + 2 e^– → Cu(s) :Overall reaction: Cu²⁺ (2.0 M) → Cu²⁺ (0.05 M)

The cell's emf is calculated through Nernst equation as follows:

:$E\; =\; E^\{o\}-\; \{0.05916\; V\; \backslash over\; 2\}\; log\; \{[Cu^\{2+\}]\_\{diluted\}\backslash over\; [Cu^\{2+\}]\_\{concentrated\}\}\backslash ,$

The value of E° in this kind of cell is zero, as electrodes and ions are the same in both half-cells.

After replacing values from the case mentioned, it is possible to calculate cell's potential: :$E\; =\; 0-\; \{0.05916\; V\; \backslash over\; 2\}\; log\; \{0.05\backslash over\; 2.0\}=\; 0.0474\{\; \}\; V\backslash ,$

or by: :$E\; =\; 0-\; \{0.0257\; V\; \backslash over\; 2\}\; ln\; \{0.05\backslash over\; 2.0\}=\; 0.0474\{\; \}\; V\backslash ,$

However, this value is only approximate, as reaction quotient is defined in terms of ion activities which can be approximated with the concentrations as calculated here.

The Nernst equation plays an important role in understanding electrical effects in cells and organelles. Such effects include nerve synapses and cardiac beat as well as the resting potential of a somatic cell.

Battery[link]

Many types of battery have been commercialized and represent an important practical application of electrochemistry. Early wet cells powered the first telegraph and telephone systems, and were the source of current for electroplating. The zinc-manganese dioxide dry cell was the first portable, non-spillable battery type that made flashlights and other portable devices practical. The mercury battery using zinc and mercuric oxide provided higher levels of power and capacity than the original dry cell for early electronic devices, but has been phased out of common use due to the danger of mercury pollution from discarded cells.

The lead acid battery was the first practical secondary (rechargeable) battery that could have its capacity replenished from an external source. The electrochemical reaction that produced current was (to a useful degree) reversible, allowing electrical energy and chemical energy to be interchanged as needed. Lead-acid cells continue to be widely used in automobiles.

All the preceding types have water-based electrolytes, which limits the maximum voltage per cell. The freezing of water limits low temperature performance. The lithium battery, which does not (and cannot) use water in the electrolyte, provides improved performance over other types; a rechargeable lithium ion battery is an essential part of many mobile devices.

The flow battery, an experimental type, offers the option of vastly larger energy capacity because its reactants can be replenished from external reservoirs. The fuel cell can turn the chemical energy bound in hydrocarbon gases or hydrogen directly into electrical energy with much higher efficiency than any combustion process; such devices have powered many spacecraft and are being applied to grid energy storage for the public power system.

Corrosion[link]

Corrosion is the term applied to steel rust caused by an electrochemical process. Most people are likely familiar with the corrosion of iron, in the form of reddish rust. Other examples include the black tarnish on silver, and red or green corrosion that may appear on copper and its alloys, such as brass. The cost of replacing metals lost to corrosion is in the multi-billions of dollars per year.

Iron corrosion[link]

For iron rust to occur the metal has to be in contact with oxygen and water, although chemical reactions for this process are relatively complex and not all of them are completely understood, it is believed the causes are the following: Electron transferring (reduction-oxidation) :One area on the surface of the metal acts as the anode, which is where the oxidation (corrosion) occurs. At the anode, the metal gives up electrons. ::Fe(s) → Fe²⁺(aq) + 2 e^– :Electrons are transferred from iron reducing oxygen in the atmosphere into water on the cathode, which is placed in another region of the metal. ::O₂(g) + 4 H⁺(aq) + 4 e^– → 2 H₂O(l) :Global reaction for the process: ::2 Fe(s) + O₂(g) + 4 H⁺(aq) → 2 Fe²⁺(aq) + 2 H₂O(l) :Standard emf for iron rusting: ::E° = E°_cathode – E°_anode ::E° = 1.23V – (−0.44 V) = 1.67 V Iron corrosion takes place on acid medium; H⁺ ions come from reaction between carbon dioxide in the atmosphere and water, forming carbonic acid. Fe²⁺ ions oxides, following this equation: :4 Fe²⁺(aq) + O₂(g) + (4+2x)H₂O(l) → 2 Fe₂O₃·xH₂O + 8 H⁺(aq) Iron(III) oxide hydrated is known as rust. The concentration of water associated with iron oxide varies, thus chemical representation is presented as Fe₂O₃·xH₂O. The electric circuit works as passage of electrons and ions occurs, thus if an electrolyte is present it will facilitate oxidation, this explains why rusting is quicker on salt water.

Corrosion of common metals[link]

Coinage metals, such as copper and silver, slowly corrode through use. A patina of green-blue copper carbonate forms on the surface of copper with exposure to the water and carbon dioxide in the air. Silver coins or cutlery that are exposed to high sulfur foods such as eggs or the low levels of sulfur species in the air develop a layer of black Silver sulfide.

Gold and platinum are extremely difficult to oxidize under normal circumstances, and require exposure to a powerful chemical oxidizing agent such as aqua regia.

Some common metals oxidize extremely rapidly in air. Titanium and aluminium oxidize instantaneously in contact with the oxygen in the air. These metals form an extremely thin layer of oxidized metal on the surface. This thin layer of oxide protects the underlying layers of the metal from the air preventing the entire metal from oxidizing. These metals are used in applications where corrosion resistance is important. Iron, in contrast, has an oxide that forms in air and water, called rust, that does not stop the further oxidation of the iron. Thus iron left exposed to air and water will continue to rust until all of the iron is oxided.

Prevention of corrosion[link]

Attempts to save a metal from becoming anodic are of two general types. Anodic regions dissolve and destroy the structural integrity of the metal.

While it is almost impossible to prevent anode/cathode formation, if a non-conducting material covers the metal, contact with the electrolyte is not possible and corrosion will not occur.

Coating[link]

Metals can be coated with paint or other less conductive metals (''passivation''). This prevents the metal surface from being exposed to electrolytes. Scratches exposing the metal substrate will result in corrosion. The region under the coating adjacent to the scratch acts as the anode of the reaction.

Sacrificial anodes[link]

A method commonly used to protect a structural metal is to attach a metal which is more anodic than the metal to be protected. This forces the structural metal to be cathodic, thus spared corrosion. It is called ''"sacrificial"'' because the anode dissolves and has to be replaced periodically.

Zinc bars are attached to various locations on steel ship hulls to render the ship hull cathodic. The zinc bars are replaced periodically. Other metals, such as magnesium, would work very well but zinc is the least expensive useful metal.

To protect pipelines, an ingot of buried or exposed magnesium (or zinc) is buried beside the pipeline and is connected electrically to the pipe above ground. The pipeline is forced to be a cathode and is protected from being oxidized and rusting. The magnesium anode is sacrificed. At intervals new ingots are buried to replace those lost.

Electrolysis[link]

The spontaneous redox reactions of a conventional battery produce electricity through the different chemical potentials of the cathode and anode in the electrolyte. However, electrolysis requires an external source of electrical energy to induce a chemical reaction, and this process takes place in a compartment called an electrolytic cell.

Electrolysis of molten sodium chloride[link]

When molten, the salt sodium chloride can be electrolyzed to yield metallic sodium and gaseous chlorine. Industrially this process takes place in a special cell named Down's cell. The cell is connected to an electrical power supply, allowing electrons to migrate from the power supply to the electrolytic cell.

Reactions that take place at Down's cell are the following: :Anode (oxidation): 2 Cl^– → Cl₂(g) + 2 e^– :Cathode (reduction): 2 Na⁺(l) + 2 e^– → 2 Na(l) :Overall reaction: 2 Na⁺ + 2 Cl^–(l) → 2 Na(l) + Cl₂(g)

This process can yield large amounts of metallic sodium and gaseous chlorine, and is widely used on mineral dressing and metallurgy industries.

The emf for this process is approximately −4 V indicating a (very) non-spontaneous process. In order for this reaction to occur the power supply should provide at least a potential of 4 V. However, larger voltages must be used for this reaction to occur at a high rate.

Electrolysis of water[link]

Water can be converted to its component elemental gasses, H₂ and O₂ through the application of an external voltage. Water doesn't decompose into hydrogen and oxygen spontaneously as the Gibbs free energy for the process at standard conditions is about 474.4 kJ. The decomposition of water into hydrogen and oxygen can be performed in an electrolytic cell. In it, a pair of inert electrodes usually made of platinum immersed in water act as anode and cathode in the electrolytic process. The electrolysis starts with the application of an external voltage between the electrodes. This process will not occur except at extremely high voltages without an electrolyte such as sodium chloride or sulfuric acid (most used 0.1 M).

Bubbles from the gases will be seen near both electrodes. The following half reactions describe the process mentioned above:

:''Anode (oxidation)'': 2 H₂O(l) → O₂(g) + 4 H⁺(aq) + 4 e^– :''Cathode (reduction)'': 2 H₂O(g) + 2 e^– → H₂(g) + 2 OH^–(aq) :''Overall reaction'': 2 H₂O(l) → 2 H₂(g) + O₂(g)

Although strong acids may be used in the apparatus, the reaction will not net consume the acid. While this reaction will work at any conductive electrode at a sufficiently large potential, platinum catalyzes both hydrogen and oxygen formation, allowing for relatively mild voltages (~2 V depending on the pH).

Electrolysis of aqueous solutions[link]

Electrolysis in an aqueous is a similar process as mentioned in electrolysis of water. However, it is considered to be a complex process because the contents in solution have to be analyzed in half reactions, whether reduced or oxidized.

Electrolysis of a solution of sodium chloride[link]

The presence of water in a solution of sodium chloride must be examined in respect to its reduction and oxidation in both electrodes. Usually, water is electrolysed as mentioned in electrolysis of water yielding ''gaseous oxygen in the anode'' and gaseous hydrogen in the cathode. On the other hand, sodium chloride in water dissociates in Na⁺ and Cl^– ions, cation, which is the positive ion, will be attracted to the cathode (+), thus reducing the sodium ion. The anion will then be attracted to the anode (–) oxidizing chloride ion.

The following half reactions describes the process mentioned: :1. Cathode: Na⁺(aq) + e^– → Na(s)     E°_red = –2.71 V :2. Anode: 2 Cl^–(aq) → Cl₂(g) + 2 e^–     E°_red = +1.36 V :3. Cathode: 2 H₂O(l) + 2 e^– → H₂(g) + 2 OH^–(aq)    E°_red = –0.83 V :4. Anode: 2 H₂O(l) → O₂(g) + 4 H⁺(aq) + 4 e^–    E°_red = +1.23 V

Reaction 1 is discarded as it has the most negative value on standard reduction potential thus making it less thermodynamically favorable in the process.

When comparing the reduction potentials in reactions 2 and 4, the reduction of chloride ion is favored. Thus, if the Cl^– ion is favored for reduction, then the water reaction is favored for oxidation producing gaseous oxygen, however experiments show gaseous chlorine is produced and not oxygen.

Although the initial analysis is correct, there is another effect that can happen, known as the overvoltage effect. Additional voltage is sometimes required, beyond the voltage predicted by the E°_cell. This may be due to kinetic rather than thermodynamic considerations. In fact, it has been proven that the activation energy for the chloride ion is very low, hence favorable in kinetic terms. In other words, although the voltage applied is thermodynamically sufficient to drive electrolysis, the rate is so slow that to make the process proceed in a reasonable time frame, the voltage of the external source has to be increased (hence, overvoltage).

Finally, reaction 3 is favorable because it describes the proliferation of OH^– ions thus letting a probable reduction of H⁺ ions less favorable an option.

The overall reaction for the process according to the analysis would be the following: :Anode (oxidation): 2 Cl^–(aq) → Cl₂(g) + 2 e^– :Cathode (reduction): 2 H₂O(l) + 2 e^– → H₂(g) + 2 OH^–(aq) :Overall reaction: 2 H₂O + 2 Cl^–(aq) → H₂(g) + Cl₂(g) + 2 OH^–(aq)

As the overall reaction indicates, the concentration of chloride ions is reduced in comparison to OH^– ions (whose concentration increases). The reaction also shows the production of gaseous hydrogen, chlorine and aqueous sodium hydroxide.

Quantitative electrolysis and Faraday's laws[link]

Quantitative aspects of electrolysis were originally developed by Michael Faraday in 1834. Faraday is also credited to have coined the terms ''electrolyte'', electrolysis, among many others while he studied quantitative analysis of electrochemical reactions. Also he was an advocate of the law of conservation of energy.

First law[link]

Faraday concluded after several experiments on electrical current in non-spontaneous process, the mass of the products yielded on the electrodes was proportional to the value of current supplied to the cell, the length of time the current existed, and the molar mass of the substance analyzed. In other words, the amount of a substance deposited on each electrode of an electrolytic cell is directly proportional to the quantity of electricity passed through the cell.

Below is a simplified equation of Faraday's first law: :$m\; \backslash \; =\; \backslash \; \{\; 1\; \backslash over\; 96485\; \backslash \; \backslash mathrm\{(C\; \backslash cdot\; mol^\{-1\})\}\; \}\; \backslash cdot\; \{\; Q\; M\; \backslash over\; n\; \}$ Where :''m'' is the mass of the substance produced at the electrode (in grams), :''Q'' is the total electric charge that passed through the solution (in coulombs), :''n'' is the valence number of the substance as an ion in solution (electrons per ion), :''M'' is the molar mass of the substance (in grams per mole).

Second law[link]

Faraday devised the laws of chemical electrodeposition of metals from solutions in 1857. He formulated the second law of electrolysis stating ''"the amounts of bodies which are equivalent to each other in their ordinary chemical action have equal quantities of electricity naturally associated with them."'' In other words, the quantities of different elements deposited by a given amount of electricity are in the ratio of their chemical equivalent weights.

An important aspect of the second law of electrolysis is electroplating which together with the first law of electrolysis, has a significant number of applications in the industry, as when used to protect metals to avoid corrosion.

Applications[link]

There are various extremely important electrochemical processes in both nature and industry, like the coating of objects with metals or metal oxides through electrodeposition and the detection of alcohol in drunken drivers through the redox reaction of ethanol. The generation of chemical energy through photosynthesis is inherently an electrochemical process, as is production of metals like aluminum and titanium from their ores. Certain diabetes blood sugar meters measure the amount of glucose in the blood through its redox potential.

The action potentials that travel down neurons are based on electric current generated by the movement of sodium and potassium ions into and out of cells. Specialized cells in certain animals like eels can generate electric currents powerful enough to disable much larger animals.

See also[link]

Reactivity series

Bioelectromagnetism

Bioelectrochemistry

Contact tension – a historical forerunner to the theory of electrochemistry.

Electrochemical impedance spectroscopy

Electroanalytical method

Electrochemical potential

Electrochemiluminescence

Electroplating

Electrochemical engineering

Electrochemical energy conversion

Frost diagram

Important publications in electrochemistry

Magnetoelectrochemistry

Nanoelectrochemistry

Photoelectrochemistry

Pourbaix diagram

Redox titration

Standard electrode potential (data page)

Voltammetry

ITIES

References[link]

Bibliography[link]

Ebbing, Darrell D. and Gammon, Steven D. General Chemistry (2007) ISBN 0-618-73879-7,

Nobel Lectures in Chemistry, Volume 1, World Scientific (1999) ISBN 981-02-3405-8

Swaddle, Thomas Wilson Inorganic chemistry: an industrial and environmental perspective, Academic Press (1997) ISBN 0-12-678550-3

Wiberg, Egon; Wiberg, Nils and Holleman, Arnold Frederick Inorganic chemistry, Academic Press (2001) ISBN 0-12-352651-5

External links[link]

Learn Electrochemistry with Experiments

''All about electrochemistry'' (online Reference Text for General Chemistry)

The Electrochemical Society

Electrochemical Science and Technology Information Resource (ESTIR)

International Society of Electrochemistry (ISE)

Category:Physical chemistry

ar:كيمياء كهربية be:Электрахімія be-x-old:Электрахімія bg:Електрохимия bs:Elektrohemija ca:Electroquímica cs:Elektrochemie de:Elektrochemie et:Elektrokeemia el:Ηλεκτροχημεία es:Electroquímica eo:Elektrokemio fa:الکتروشیمی fr:Électrochimie gl:Electroquímica ko:전기화학 hi:विद्युत्-रसायन hr:Elektrokemija id:Elektrokimia it:Elettrochimica he:אלקטרוכימיה kk:Электрохимия la:Electrochemia lb:Elektrochimie lmo:Eletruchimica hu:Elektrokémia nl:Elektrochemie ja:電気化学 no:Elektrokjemi pl:Elektrochemia pt:Eletroquímica ro:Electrochimie ru:Электрохимия sq:Elektrokimia scn:Alittrochìmica simple:Electrochemistry sl:Elektrokemija sr:Elektrohemija sh:Elektrokemija su:Éléktrokimia fi:Sähkökemia sv:Elektrokemi ta:மின்வேதியியல் th:ไฟฟ้าเคมี tr:Elektrokimya uk:Електрохімія vi:Điện hóa zh:电化学

name	The Basics
background	group_or_band
origin	Melbourne, Australia
genre	Rock
years active	2002–present
label	Independent, Albert Records
associated acts	Gotye, Down Hills Home, Dog With Wheels, Blood Red Bird
website	The Basics Official Website
current members	Wally De BackerKris SchroederTim Heath
past members	Michael Hubbard
notable instruments	Lead guitar, drums, bass guitar. }}

The Basics ( ) are a three-piece band from Melbourne, Australia, formed by Wally De Backer and Kris Schroeder in 2002. Their style has been described as anything from 'indie-pop' to 'rock'n'roll' to 'pop-rock', though their records show they span a wide range of genres, including reggae, ska, country, and electro-pop. They are "recognised as one of Australia's hardest-working bands".

With close to 1000 shows in their ten-year career, their live performances are well-known for their sense of humour and energy.

Formation [link]

The Basics were formed after Kris met Wally at a party in Melbourne. The event was to see off the young aspiring producer, who was about to depart for Los Angeles, and together with a number of musician friends, the two jammed on some blues-rock standards. Later that night, they bonded over a mutual love of The Beatles, 70s and 80s cartoon theme songs and old Sierra adventure games.

Initially, they played around Melbourne as an acoustic guitar/drums combo, starting at The Opposition in Frankston and the House of Fools in Footscray, where in late 2002 they met Michael Hubbard and later invited him to join them on electric guitar. Though lacking any real experience with the instrument, Kris willingly purchased his first bass guitar, and the trio was born. During this time, the group start performing songs with more complicated three-part harmony.

During late 2002 and early 2003, The Basics recorded and released an album called ''Get Back'' through MGM Distribution. They began what was to become regular tours of the East and West coasts of Australia.

2004-2005: Current lineup [link]

Tim Heath joined the group in June 2004, after Michael decided to pursue his solo career, which has included being one half of Down Hills Home. Tim was reportedly the only person to reply to an advertisement in Melbourne's Beat Magazine looking for a new guitarist. Tim apparently answered the advertisement - which said the applicant "must have a love of 50s and 60s rock'n'roll" - thinking that he would be meeting "a couple of old guys to play with on the weekends over some beers". They soon recorded ''For Girls Like You''.

The Basics in 2005 continued to tour and play small festivals, and after releasing ''For Girls Like You'' through MGM Distribution, they departed for a national tour of Australia, which lasted for two months and took them to every Australian state and territory. Stuart Padbury, a young Melbourne sound engineer, joined them on much of this tour. On returning, the band began demonstrating songs for a new album.

2006-2009: Touring and soundtracks [link]

In 2006, The Basics began recording what was to become known as ''Stand Out/Fit In''. Taking several months, it was not completed until the end of the year, despite intentions to have it released in June. Instead, they held a successful 'album preview', where each of the tracks was demonstrated in 'rough form' accompanied by a music video for each (produced by Melbourne photographic artist James Bryans). The band also talked about the origins of the songs. This event brought a lot of attention to the band for the idea's originality. They pre-released a radio single 'Just Hold On' from the album. The band were invited to play the hugely popular Homebake Festival in Sydney, where they received a great response, after being introduced onto the stage by a short stocky Asian guy with big calves ("one of the highlights" wrote ''The Daily Telegraph'').

In 2007, the band departed on a tri-state residency which saw them play Melbourne, Sydney and Brisbane every week for the month of April - a bold move which brought further attention to the band for its original idea. Riding on the wave of this tour, Schroeder, De Backer and Heath departed on their first overseas tour which saw them performing 26 shows around Japan, Norway and the United Kingdom. They also toured twice more up the East Coast, one of which was with popular Japanese band The Bawdies. Their song 'Rattle My Chain' was used in a series of commercials for Volvo Australia. The song 'Hey There!' featured in the British film ''The Bank Job'' - starring Jason Statham - and was used as the backing for a February 2007 short film directed by Tim Longhurst called The Rip. Their song 'Better' was featured in a surfing documentary about the invention of the shortboard in 1967.

In 2008, the band appeared on Australia's Channel 9 for Australia Day celebrations, performing two of their songs - 'Just Hold On' and 'Hey There!' - to an estimated audience of 2 million. Securing an Australian Government grant, they embarked on a two-month tour of Australia, specifically targeting "culturally underprivileged groups" in rural and regional schoolchildren and Indigenous communities. The programme had them holding masterclasses and performing alongside Indigenous groups in the remote Northern Territory and Queensland. Their initiative also had them raising money for the charity Lifeline, their contribution to which was recognised with a plaque at the end of the tour. Season two of ''Californication'' starring David Duchovny featured their cover of the classic 'Have Love, Will Travel', most famously covered by 'The Sonics'.

In 2009, The Basics for the first time enjoyed the support of Australian radio network Triple J, which had reportedly snubbed the band's previous material. The singles 'With This Ship' and 'Like A Brother' were added to the station's playlist, and momentum carried The Basics overseas for a second tour of the United Kingdom and Norway, and also a series of shows in Dublin, Ireland. They were joined by the longtime front-of-house engineer Stuart Padbury, who had been mixing them since 2005. The band was often seen in the Grafton Street Mall in Dublin, busking to promote their concerts there. Their second show in Oslo, Norway, saw the band perform with Hot Tub, one of the members of the Norwegian boy band "Boyzvoice", in his first performance for several years. Season Eight of ''Scrubs'' featured the song 'Lookin' Over My Shoulder'.

Despite all this promise, the band's album ''Keep Your Friends Close'' - produced and part-recorded by Peter Cobbin at London's Abbey Road Studios - though enjoying many favourable reviews, failed to impress Richard Kingsmill, music director of Triple J. This effectively ended the band's apparent upward spiral and the resulting album launch tour was reportedly "trying".

2010: Hiatus and live album [link]

In 2010, following the band's fourth stint at the Tamworth Country Music Festival, and the recording of a yet-unreleased live album, an indefinite hiatus was announced on the band's websites. This was in part due to the impending release of a new album produced by Wally for his Gotye project, and also to reported tensions within the band following the previous year's disappointments.

However, this hiatus was soon broken with a two-month residency at the Northcote Social Club in Melbourne, which saw an apparent return to form. The band's EP "Wait For You" enjoys airplay on Triple J. The Basics also played a one-off show at Sydney's Oxford Art Factory.

On 20 August 2010, The Basics released their fourth LP , available free and exclusively from their website for digital download. The band had reportedly moved to expand their listenership through this free giveaway, though 300 "Deluxe" CD/vinyl versions have been printed. was recorded at the Northcote Social Club on 6 February, "in front of a live studio audience", and like the previous record, was mixed by Peter Cobbin at Abbey Road Studios. Technically a self-titled album, the phonetics spell out the accurate pronunciation of the band’s name. Kris Schroeder: "For years we’ve worked at bringing our live energy into the studio and thus far it’s been a bit hit-and-miss. Our trick this time was to pull a switcheroo and bring the studio to us instead; the result is the best and closest to us we’ve sounded yet."

Melbourne thespian and Dog With Wheels bassist David Bramble - friends with Heath from university days - has occasionally joined the band on tour, playing keys, often while sporting a large moustache. Other guests have included Jake Mason (saxophone), also of Cookin' on 3 Burners and The Bamboos, Gideon Brazil (saxophone, flute), Simon Imrei (guitar and vocals) and Monty MacKenzie (saxophone).

Covers have often made an appearance from various sources: to date, some of the bands covered have been Cream, The Kinks, The Rolling Stones, The Police, Neil Young, Bob Dylan, New Kids on the Block, Richard Berry, Sonny Curtis and The Crickets, JJ Cale, Harry Nilsson, Bill Scott, Ryan Adams and The Coasters (via The Beatles for their cover of Three Cool Cats).

Members [link]

;Current

Wally De Backer - drums, vocals (2002-present)

Kris Schroeder - bass, vocals (2002-present)

Tim Heath - guitar, vocals (2004-present)

;Former

Michael Hubbard - guitar, vocals (2002-2004)

Discography [link]

Albums[link]

Get Back (15 January 2004)

Stand Out/Fit In (5 May 2007)

Keep Your Friends Close (25 September 2009)

(20 August 2010)

EP[link]

For Girls Like You (11 July 2005)

Lookin' Over My Shoulder (10 February 2007)

Like A Brother (5 June 2009)

Wait For You (21 May 2010)

Singles[link]

Call It Rhythm & Blues (20 August 2004)

Just Hold On

With This Ship (22 February 2009)

Upcoming projects[link]

The band is taking a three year hiatus, with an announced return to the stage together in early 2014. Wally De Backer launched Making Mirrors under his Gotye act in August 2011, Tim Heath will be touring and recording with Blood Red Bird, and Kris Schroeder recorded a solo EP titled, Patience in the Face of Control, before leaving Australia to work with the Red Cross in Kenya for a two year sabbatical.

References[link]

External links[link]

Official Website

Myspace Website

Category:Victoria (Australia) musical groups

nl:The Basics