Z kursu: SOLIDWORKS 2022 Essential Training
Odblokuj cały kurs już dziś
Dołącz dzisiaj, aby uzyskać dostęp do ponad 23 500 kursów prowadzonych przez ekspertów w branży.
Chamfering edges – SOLIDWORKS: przewodnik
Z kursu: SOLIDWORKS 2022 Essential Training
Chamfering edges
- The Solidwork's chamfer tool works very similar to the fillet tool. And let me show you how to make that work. So under features right up here under fillet there's actually a little twirl down here or drop down here and I can choose chamfer right. When I jump into the chamfer tool you can see I've got a bunch of different ways that I can make chamfer. So the first one here is going to be the angle distance. So you're going to be typing in like an angle, like 45 degrees and something like a half inch, and it's going to be going in and chamfering that edge. Same thing over here. I have a distance distance method so I can define how I'd like that to be. I can just break the corner or or do a vertex cut, which is pretty cool. And then I got a couple other fancy ones called like this offset face and so on. So let's take a look at the very first one here. So this is going to be angle distance, choose an edge. And down here,…
Korzystaj z plików z ćwiczeniami, aby zmieniać teorię w praktykę
Pobierz pliki wykorzystywane przez instruktora podczas kursu. Weź udział i ucz się oglądając, słuchając i ćwicząc.
Pobierz kursy i ucz się w dowolnym miejscu
Obejrzyj kursy na urządzeniach mobilnych – bez dostępu do internetu. Pobierz kursy, korzystając z aplikacji LinkedIn Learning w systemie iOS lub Android.
Spis treści
-
-
Launching SOLIDWORKS for the first time7 min41 s
-
(zablokowane)
Navigating in the 3D workspace6 min20 s
-
(zablokowane)
SOLIDWORKS templates4 min46 s
-
(zablokowane)
Saving, renaming, and managing files4 min40 s
-
(zablokowane)
Measuring2 min8 s
-
(zablokowane)
Interface improvements for SOLIDWORKS 20221 min48 s
-
-
-
Creating sketches5 min48 s
-
(zablokowane)
Understanding relationships3 min56 s
-
(zablokowane)
Using the Extrude feature6 min34 s
-
(zablokowane)
Using the Extruded Cut feature5 min7 s
-
(zablokowane)
Creating revolved features5 min4 s
-
(zablokowane)
Making revolved cuts4 min10 s
-
(zablokowane)
Applying materials, colors, and finishes4 min36 s
-
(zablokowane)
Finding mass properties4 min14 s
-
(zablokowane)
System options, units, and templates4 min45 s
-
(zablokowane)
Working with dimensions6 min1 s
-
(zablokowane)
Selecting colors2 min18 s
-
(zablokowane)
Creating reference coordinate systems2 min39 s
-
-
-
Line and Centerline tools4 min49 s
-
(zablokowane)
Using the Rectangle tool4 min2 s
-
(zablokowane)
Circles and arcs3 min44 s
-
(zablokowane)
Drawing slots2 min36 s
-
(zablokowane)
Working with ellipses and conics3 min23 s
-
(zablokowane)
Sketching polygons3 min34 s
-
(zablokowane)
Creating text6 min15 s
-
(zablokowane)
Using equations and linked variables6 min38 s
-
(zablokowane)
Using the Spline tool4 min40 s
-
(zablokowane)
Equation driven curve2 min34 s
-
(zablokowane)
Sketch Ink3 min30 s
-
(zablokowane)
Copying and patterning sketch text2 min30 s
-
-
-
Trimming and extending a sketch5 min13 s
-
(zablokowane)
Creating offset geometry4 min25 s
-
(zablokowane)
Moving, copying, rotating, and scaling4 min24 s
-
(zablokowane)
Erasing, undoing, and redoing actions2 min42 s
-
(zablokowane)
Using the Mirror tools2 min36 s
-
(zablokowane)
Creating repeating patterns in a sketch4 min8 s
-
(zablokowane)
Using construction lines4 min1 s
-
(zablokowane)
Using the Convert Entities tool2 min37 s
-
(zablokowane)
Adding fillets and chamfers to sketches2 min59 s
-
-
-
Adding fillets to a part5 min49 s
-
(zablokowane)
Chamfering edges4 min52 s
-
(zablokowane)
Applying draft4 min14 s
-
(zablokowane)
Using the Shell command2 min46 s
-
(zablokowane)
Using the Mirror command5 min55 s
-
(zablokowane)
Creating linear patterns3 min6 s
-
(zablokowane)
Creating circular patterns2 min58 s
-
-
-
Loft tool9 min36 s
-
(zablokowane)
Lofted shapes with guide curves2 min20 s
-
(zablokowane)
Making lofted cuts2 min27 s
-
(zablokowane)
Creating swept shapes3 min52 s
-
(zablokowane)
Making swept cuts3 min32 s
-
(zablokowane)
Using the Wrap command2 min36 s
-
(zablokowane)
Boundary Boss/Base4 min4 s
-
(zablokowane)
Intersect tool4 min13 s
-
(zablokowane)
Working with configurations3 min46 s
-
(zablokowane)
Surface tools2 min54 s
-
(zablokowane)
Using surfaces to build solid models2 min41 s
-
(zablokowane)
Direct Editing: Move/Copy Bodies4 min56 s
-
(zablokowane)
Direct Editing: Move Face3 min12 s
-
(zablokowane)
Direct Editing: Combine2 min51 s
-
(zablokowane)
Direct Editing: Split4 min19 s
-
(zablokowane)
Project Curve2 min50 s
-
(zablokowane)
Slice tool4 min25 s
-
(zablokowane)
Introduction to Sheet Metal tools3 min21 s
-
(zablokowane)
Introduction to weldments3 min54 s
-
(zablokowane)
Review of available tool sets6 min47 s
-
(zablokowane)
Using Markup3 min7 s
-
-
-
Starting an assembly3 min2 s
-
(zablokowane)
Copying, moving, and rotating parts3 min12 s
-
(zablokowane)
Mating parts together in an assembly6 min19 s
-
(zablokowane)
Working with subassemblies2 min59 s
-
(zablokowane)
Making linear patterns4 min11 s
-
(zablokowane)
Creating circular patterns2 min48 s
-
(zablokowane)
Using the Toolbox3 min46 s
-
(zablokowane)
Downloading internet parts4 min6 s
-
(zablokowane)
Using the Q key for quick references2 min35 s
-
-
-
Creating component Mates4 min54 s
-
(zablokowane)
Mating parts with Advanced Mates5 min20 s
-
(zablokowane)
Mating parts with Path Mate2 min2 s
-
(zablokowane)
Mechanical Mates3 min49 s
-
(zablokowane)
Mating parts by aligning planes3 min44 s
-
(zablokowane)
Magnetic Mates3 min8 s
-
(zablokowane)
Asset Publisher for Magnetic Mates3 min43 s
-
-
-
(zablokowane)
Adding annotations9 min18 s
-
(zablokowane)
Adding special views to your drawings6 min17 s
-
(zablokowane)
Adding custom properties4 min12 s
-
(zablokowane)
Linking drawing notes3 min29 s
-
(zablokowane)
Using the Design Library3 min24 s
-
(zablokowane)
Using equations for custom properties2 min46 s
-
(zablokowane)
-
-
Adding assemblies to drawings4 min9 s
-
(zablokowane)
Including a bill of materials4 min2 s
-
(zablokowane)
Adding balloons on an assembly drawing5 min10 s
-
(zablokowane)
Making an exploded view4 min6 s
-
(zablokowane)
Adding in custom properties and revision2 min31 s
-
(zablokowane)
Detailing mode4 min24 s
-