Skip to content
Permalink
master
Switch branches/tags
Go to file
11 contributors

Users who have contributed to this file

@zoracon @Hainish @J0WI @jeremyn @jgillula @brainwane @pipboy96 @coliff @Bisaloo @heuser443 @imba-tjd

Table of Contents

General Info

On May 31st, 2021 we will end manual additions to the rulesets. Please see this explanation on the future of HTTPSE Rulesets.

We will continue accept requests on rulesets already in our list that are causing significant breakage for users through the summer. However, in autumn, we will begin the plan to ultimately move our crowdsourced rulesets out of the extension in favor of the Smarter Encryption Ruleset.

Welcome

Welcome, and thank you for your interest in contributing to HTTPS Everywhere! HTTPS Everywhere depends on the open source community for its continued success, so any contribution is appreciated.

One of the things that makes it easy to contribute to HTTPS Everywhere is that you don't have to be a coder to contribute. That's because HTTPS Everywhere's most important component is the list of rules that tell it when it can request a website over HTTPS. These rules are just XML files that contain regular expressions, so if you can write XML and simple regexes, you can help us add rules and increase HTTPS Everywhere's coverage. No coding skills necessary!

If you want to have the greatest impact, however, you can help be a ruleset maintainer. Ruleset maintainers are trusted volunteers who examine rulesets contributed by others and work with them to ensure that these rulesets work properly and are styled correctly before they're merged in. While we currently have a couple of extremely dedicated and extremely proficient ruleset maintainers, the backlog of sites to add to HTTPS Everywhere just keeps growing, and they need help! If you would like to volunteer to become one, the best thing to do is to build trust in your work by monitoring the repository, contributing pull requests, and commenting on issues that interest you. Then you can contact us at https-everywhere-rules-owner [at] eff <dot> org expressing your interest in helping out.

If you get stuck we have two publicly-archived mailing lists: the https-everywhere list is for discussing the project as a whole, and the https-everywhere-rulesets list is for discussing the rulesets and their contents, including patches and git pull requests.

You can also find more information on about HTTPS Everywhere on our FAQ page.

Also, please remember that this project is governed by EFF's Public Projects Code of Conduct.

Thanks again, and we look forward to your contributions!

HTTPS Everywhere Source Code Layout

There are several main areas of development on HTTPS Everywhere: the rulesets, the core codebase, utilities, and tests.

The rulesets can be found in the rules top-level path and include all the rules for redirecting individual sites to HTTPS. These are written in XML. If you want to get started contributing to HTTPS Everywhere, we recommend starting here.

The core codebase consists of the code that performs the redirects, the UI, logging code, and ruleset loading. This encompasses all code delivered with the extension itself that is not a ruleset. It is written in JavaScript, using the WebExtensions API (located in chromium).

The utilities (utils top-level path) include scripts that build the extension, sanitize and perform normalization on rulesets, simplify rules, and help label GitHub issues. Historically, these utilities have been written in Python. Many of the newer utilities are written in JavaScript, and are meant to be run in node. Some of the wrappers for these utilities are in shell scripts.

Tests are performed in headless browsers and located in the test top-level path. These are written in Python, and some of the wrappers for these tests are in shell scripts.

Source Tree:

	chromium/                 WebExtension source code (for Firefox & Chromium/chrome)
	chromium/external         External dependencies
	chromium/test             Unit tests

	rules/                    Symbolic link to src/chrome/content/rules

	src/chrome/content/rules  Ruleset files live here

	test/                     Travis unit test source code live here

	utils/                    Various utilities (includes some Travis test source)

Install Dependencies and Test Build

Get the packages you need and install a git hook to run tests before push:

	bash install-dev-dependencies.sh

Run the ruleset validations and browser tests:

	bash test.sh

Run the latest code and rulesets in a standalone Firefox profile:

	bash test/firefox.sh --justrun

Run the latest code and rulesets in a standalone profile for a specific version of Firefox:

	FIREFOX=/path/to/firefox bash test/firefox.sh --justrun

Run the latest code and rulesets in a standalone Chromium profile:

	bash test/chromium.sh --justrun

Run the latest code and rulesets in a standalone Tor Browser profile:

	bash test/tor-browser.sh path_to_tor_browser.tar.xz

Build the Firefox (.xpi) & Chromium (.crx) extensions:

	bash make.sh

Both of the build commands store their output under pkg/.

Precommit Testing

One can run the available test suites automatically by enabling the precommit hook provided with:

	ln -s ../../hooks/precommit .git/hooks/pre-commit

Testing

Quickly Testing a Ruleset

  1. Open a version of the Firefox or Chrome browser without HTTPS Everywhere loaded to the HTTP endpoint

  2. From your working ruleset branch, test with running bash test/firefox.sh --justrun or bash test/chromium.sh --justrun to open a fresh profile with the extension loaded and click around and compare the look and functionality of both sites. If something fails to load or looks strange, you may be able to debug the problem by opening the network tab of your browser debugging tool. Modify the ruleset until you get it in a good state - you'll have to re-run the HTTPS Everywhere-equipped browser upon each change.

Coverage

Please reference HTTPS Ruleset Checker to properly test rulesets against our tests before sending a pull request.

Submitting Changes

To submit changes, open a pull request from our GitHub repository.

HTTPS Everywhere is maintained by a limited set of staff and volunteers. Please be mindful that we may take a while before we're able to review your contributions.

Contributing Rulesets

Thanks for your interest in contributing to the HTTPS Everywhere rulesets! There's just a few things you should know before jumping in. First some terminology, which will help you understand how exactly rulesets are structured and what each one contains:

  • ruleset: a scope in which rules, targets, and tests are contained. rulesets are usually named after the entity which controls the group of targets contained in it. There is one ruleset per XML file within the src/chrome/content/rules directory.
  • target: a Fully Qualified Domain Name which may include a wildcard specified by *. on the left side, which rules are applied to. There may be many targets within any given ruleset.
  • rule: a specific regular expression rewrite that is applied for all matching targets within the same ruleset. There may be many rules within any given ruleset.
  • test: a URL for which a request is made to ensure that the rewrite is working properly. There may be many tests within any given ruleset.
<!--
				An example ruleset. Note that this example doesn't necessarily
				satisfy the style criteria described below - we just have it
				here to show you what the components of a ruleset looks like.
-->
<ruleset name="eff.org">
				<target host="*.eff.org" />

				<rule from="^http:" to="https:" />

				<test url="http://www.eff.org/https-everywhere/" />
</ruleset>

HTTPS Everywhere includes tens of thousands of rulesets. Any one of these sites can change their HTTPS configuration at any time, so keeping HTTPS Everywhere usable is a task that requires constant maintenance. At the same time, HTTPS deployment on the web is becoming more and more widespread, thanks to projects like Let's Encrypt. This is a very good thing, as it means the web is becoming a safer place! However, with each new ruleset that HTTPS Everywhere includes comes with an increase in both download size upon install and memory usage at runtime. Rather than adding new rulesets, we encourage potential contributors to look for broken rulesets and try to fix them first.

Some rulesets have the attribute platform="mixedcontent". These rulesets cause problems in browsers that enable active mixed-content (loading insecure resources in a secure page) blocking. When browsers started enforcing active mixed-content blocking, some HTTPS sites started to break. That's why we introduced this tag - it disables those rulesets for browsers blocking active mixed content. It is likely that many of these sites have fixed this historical problem, so we particularly encourage ruleset contributors to fix these rulesets first:

	git grep -i mixedcontent src/chrome/content/rules

New Rulesets

If you want to create new rulesets to submit to us, we expect them to be in the src/chrome/content/rules directory. That directory also contains a useful script, make-trivial-rule, to create a simple ruleset for a specified domain. There is also a script in test/validations/special/run.py, to check all the pending rulesets for several common errors and oversights. For example, if you wanted to make a ruleset for the example.com domain, you could run:

cd src/chrome/content/rules
bash ./make-trivial-rule example.com

This would create Example.com.xml, which you could then take a look at and edit based on your knowledge of any specific URLs at example.com that do or don't work in HTTPS. Please have a look at our Ruleset Style Guide below, where you can find useful tips about finding more subdomains. Our goal is to have as many subdomains covered as we can find.

Minimum Requirements for a Ruleset PR

There are several volunteers to HTTPS Everywhere who have graciously dedicated their time to look at the ruleset contributions and work with contributors to ensure quality of the pull requests before merging. It is typical for there to be several back-and-forth communications with these ruleset maintainers before a PR is in a good shape to merge. Please be patient and respectful, the maintainers are donating their time for no benefit other than the satisfaction of making the web more secure. They are under no obligation to merge your request, and may reject it if it is impossible to ensure quality. You can identify these volunteers by looking for the "Collaborator" identifier in their comments on HTTPS Everywhere issues and pull requests.

In the back-and-forth process of getting the ruleset in good shape, there may be many commits made. It is this project's convention to squash-and-merge these commits into a single commit before merging into the project. If your commits are cryptographically signed, we may ask you to squash the commits yourself in order to preserve this signature. Otherwise, we may squash them ourselves before merging.

We prefer small, granular changes to the rulesets. Not only are these easier to test and review, this results in cleaner commits.

Ruleset Style Guide

Motivation

Rules should be written in a way that is consistent, easy for humans to read and debug, reduces the chance of errors, and makes testing easy.

To that end here are some style guidelines for writing or modifying rulesets. They are intended to help and simplify in places where choices are ambiguous, but like all guidelines they can be broken if the circumstances require it.

Indentation & Misc Stylistic Conventions

Use tabs for indentation. For tests and exclusions, place them under the target that they refer to, indented one additional layer. See below for an example.

We provide an .editorconfig file in the top-level path, which you can configure your editor of choice to use. This will enforce proper indentation.

Use double quotes (", not ').

Wildcards in Targets

Left-Wildcards

Avoid using the left-wildcard (<target host="*.example.com" />) unless you intend to rewrite all or nearly all subdomains. If it can be demonstrated that there is comprehensive HTTPS coverage for subdomains, left-wildcards may be appropriate. Many rules today specify a left-wildcard target, but the rewrite rules only rewrite an explicit list of hostnames.

Instead, prefer listing explicit target hosts and a single rewrite from "^http:" to "^https:". This saves you time as a ruleset author because each explicit target host automatically creates an implicit test URL, reducing the need to add your own test URLs. These also make it easier for someone reading the ruleset to figure out which subdomains are covered.

If you know all subdomains of a given domain support HTTPS, go ahead and use a left-wildcard, along with a plain rewrite from "^http:" to "^https:". Make sure to add a bunch of test URLs for the more important subdomains.

Edge-Case: Right-Wildcards

Right-wildcards (<target host="account.google.*" />) are highly discouraged. Only use them in edge-cases where other solutions are unruly.

Example:

Where they must be used, please add a comment to the ruleset explaining why.

Complicated Regex in Rules

Avoid regexes with long strings of subdomains, e.g. <rule from="^http://(foo|bar|baz|bananas).example.com" />. These are hard to read and maintain, and are usually better expressed with a longer list of target hosts, plus a plain rewrite from "^http:" to "^https:".

In general, avoid using open-ended regex in rules. In certain cases, open-ended regex may be the most elegant solution. But carefully consider if there are other options.

Examples:

  • Rulesets with a lot of domains that we can catch with a simple regex that would be tedious and error-prone to list individually, like 360.cn.xml
  • CDNs with an arbitrarily large number of subdomains (example).

Enumerating Subdomains

If you're not sure what subdomains might exist, you can install the Sublist3r tool:

	git clone https://github.com/aboul3la/Sublist3r.git
	cd Sublist3r
	sudo pip install -r requirements.txt # or use virtualenv...

Then you can to enumerate the list of subdomains:

	python sublist3r.py -d example.com -e Baidu,Yahoo,Google,Bing,Ask,Netcraft,Virustotal,SSL

Alternatively, you can iteratively use Google queries and enumerate the list of results like such:

  1. site:*.eff.org
  2. site:*.eff.org -site:www.eff.org
  3. site:*.eff.org -site:www.eff.org -site:ssd.eff.org

... and so on.

Target Ordering

In all cases where there is a list of domains, sort them in alphabetical order starting from the top level domain at the right reading left, moving ^ and www to the top of their group. For example:

	example.com
	www.example.com
	a.example.com
	www.a.example.com
	b.a.example.com
	b.example.com
	example.net
	www.example.net
	a.example.net

Rule Ordering

If there are a handful of tricky subdomains, but most subdomains can handle the plain rewrite from "^http:" to "^https:", specify the rules for the tricky subdomains first, and then then plain rule last. Earlier rules will take precedence, and processing stops at the first matching rule. There may be a tiny performance hit for processing exception cases earlier in the ruleset and the common case last, but in most cases the performance issue is trumped by readability.

Non-working hosts

It is useful to list hosts that do not work in the comments of a ruleset. This is a stylistic preference but is not strictly required.

For easy reading, please avoid using UTF characters unless in the rare instances that they are part of the hostname itself.

Example:

<!--
	Invalid certificate:
					incomplete.example.com (incomplete certificate chain)
					selfsigned.example.com
					wronghost.example.com

	Redirect to HTTP:
					httponly.example.com

	Refused:
					abc.example.com
					abc.abc.example.com

	Time out:
					drop.example.com

-->

In most cases, the absence of a 2XX or 3XX endpoint indicates that a host should not be included in the set of targets and is non-working, except when it is clear that the site functions as intended in the absence of such an endpoint.

Ruleset Names

For simple sites, the ruleset name attribute can be either a site description or the domain itself. For example, the SeattleAquarium.org.xml ruleset could have a name of Seattle Aquarium, SeattleAquarium.org, or seattleaquarium.org.

If a ruleset covers multiple domains, then the ruleset name should reflect the broader organization, project, or concept for what a ruleset is trying to accomplish.

Examples:

Filenames

Filenames should vaguely resemble the name so that someone looking for the file based on the name can find it easily. Filenames that start with a capital letter are preferred. Prefer dashes over underscores in filenames. Dashes are easier to type.

Cross-referencing Rulesets

This sort of comment: For other Migros coverage, see Migros.xml. is definitely appropriate, in both directions.

Regex Conventions

When matching an arbitrary DNS label (a single component of a hostname), prefer ([\w-]+) for a single label (i.e. www), or ([\w.-]+) for multiple labels (i.e. www.beta). Avoid more visually complicated options like ([^/:@\.]+\.)?.

For securecookie tags, if you know that all cookies on the included targets can be secured (which in particular means that the cookies are not used by any of its non-securable subdomains), use the trivial

<securecookie host=".+" name=".+" />

where we prefer .+ over .* and .. They are functionally equivalent, but it's nice to be consistent.

Avoid the negative lookahead operator ?!. This is almost always better expressed using positive rule tags and negative exclusion tags. Some rulesets have exclusion tags that contain negative lookahead operators, which is very confusing.

Prefer capturing groups (www\.)? over non-capturing (?:www\.)?. The non-capturing form adds extra line noise that makes rules harder to read. Generally you can achieve the same effect by choosing a correspondingly higher index for your replacement group to account for the groups you don't care about.

Snapping Redirects

Avoid snapping redirects. For instance, if https://foo.fm serves HTTPS correctly, but redirects to https://foo.com, it's tempting to rewrite foo.fm to foo.com, to save users the latency of the redirect. However, such rulesets are less obviously correct and require more scrutiny. And the redirect can go out of date and cause problems. HTTPS Everywhere rulesets should change requests the minimum amount necessary to ensure a secure connection.

Example: Ruleset before style guidelines are applied

<ruleset name="WHATWG.org">
		<target host='whatwg.org' />
		<target host="*.whatwg.org" />

		<rule from="^http://((?:developers|html-differences|images|resources|\w+\.spec|wiki|www)\.)?whatwg\.org/"
		to="https://$1whatwg.org/" />
</ruleset>

Example: Ruleset after style guidelines are applied, with test URLs

<ruleset name="WHATWG.org">
	<target host="whatwg.org" />
	<target host="www.whatwg.org" />
	<target host="developers.whatwg.org" />
	<target host="html-differences.whatwg.org" />
	<target host="images.whatwg.org" />
	<target host="resources.whatwg.org" />
	<target host="*.spec.whatwg.org" />
		<test url="http://html.spec.whatwg.org/" />
		<test url="http://fetch.spec.whatwg.org/" />
		<test url="http://xhr.spec.whatwg.org/" />
		<test url="http://dom.spec.whatwg.org/" />
	<target host="wiki.whatwg.org" />

	<rule from="^http:" to="https:" />
</ruleset>

Removal of Rules

Regular Rules

It should be considered a sufficient condition for removal if a contributor can demonstrate that the TLS configuration for either a specific target or a ruleset altogether is unstable and/or breaking, or will be unstable and/or breaking in the near future. It is, of course, preferable that the ruleset be fixed rather than removed.

HSTS Preloaded Rules

In utils we have a tool called hsts-prune which removes targets from rulesets if they are already contained in the HSTS preload list for browsers that we support. To be explicit, the script is an implementation of the following policy:

Let included domain denote either a target, or a parent of a target. Let supported browsers include the ESR, Dev, and Stable releases of Firefox, and the Stable release of Chromium. If included domain is a parent of the target, the included domain must be present in the HSTS preload list for all supported browsers with the relevant flag which denotes inclusion of subdomains set to true. If included domain is the target itself, it must be included the HSTS preload list for all supported browsers. Additionally, if the http endpoint of the target exists, it must issue a 3XX redirect to the https endpoint for that target. Additionally, the https endpoint for the target must deliver a Strict-Transport-Security header with the following directives present:

  • max-age >= 31536000
  • includeSubDomains
  • preload

If all the above conditions are met, a contributor may remove the target from the HTTPS Everywhere rulesets. If all targets are removed for a ruleset, the contributor is advised to remove the ruleset file itself. The ruleset rule and test tags may need to be modified in order to pass the ruleset coverage test.

Every new pull request automatically has the hsts-prune utility applied to it as part of the continual integration process. If a new PR introduces a target which is preloaded, it will fail the CI test suite. See:

  • .travis.yml
  • test/run_travis.sh

Contributing Code

In addition to ruleset contributions, we also encourage code contributions to HTTPS Everywhere. There are a few considerations to keep in mind when contributing code.

Officially supported browsers:

  • Firefox Stable
  • Firefox ESR
  • Chromium Stable

We also informally support the Opera browser, but do not have tooling around testing Opera. Firefox ESR is supported because this is what the Tor Browser, which includes HTTPS Everywhere, is built upon. For the test commands, refer to README.md.

The current extension maintainer is @zoracon. You can tag them for PRs which involve the core codebase.

Several of our utilities and our full test suite is written in Python. Eventually we would like the whole codebase to be standardized as JavaScript. If you are so inclined, it would be helpful to rewrite the tooling and tests into JavaScript while maintaining the functionality.

Contributing Documentation

Standalone documentation should be written in Markdown that follows the Google style guide. If you are updating existing documentation that does not follow the Google style guide, then you should follow the style of the file you are updating.


Pull Requests from Deleted Accounts

Sometimes a contributor will delete their GitHub account after submitting a pull request, resulting in the pull request being associated with the Ghost user (@ghost). These @ghost pull requests can cause problems for HTTPS Everywhere maintainers, leaving questions unanswered and closing off the possibility of receiving maintainer feedback to solicit clarification or request changes.

We ask that if you want to delete your GitHub account, you either close your HTTPS Everywhere pull requests before you delete your account, or wait to delete your account until we merge your pull requests. Otherwise, maintainers are free to close @ghost pull requests without any comment.

Contributing Translations

We are reviewing our process around translations and currently discussing ways to improve. Translations are still processed under the same entity and those who have an account already, do not need to take action at this time. Thank you for your contributions.