Dado (joinery)

For other uses, see Dado (disambiguation).

A through dado (left) and a stopped dado

A dado (US and Canada), housing (UK) or trench (Europe) is a slot or trench cut into the surface of a piece of machinable material, usually wood. When viewed in cross-section, a dado has three sides. A dado is cut across, or perpendicular to, the grain and is thus differentiated from a groove which is cut with, or parallel to the grain. Dados are often used to affix shelves to cabinetry carcasses. Similar to the dado, see rabbet (rebate).

Variations

• A through dado involves cuts which run between both edges of the surface, leaving both ends open.
• A stopped or blind dado ends before one or both of the cuts meets the edge of the surface.
• A half dado is formed with a narrow dado cut into one part, coupled with a rabbet of another piece. This joint tends to be used because of its ability to hide unattractive gaps due to varying material thicknesses.

See also

• Dado (architecture)
• Woodworking joints
• Dado set
• Rabbet