Here are some frequently asked questions. Use the form at the bottom of this page to ask your own question. We will reply to you by email.
Trevor Lowe - Eastbourne
Yes, Tek-Dek Interior is an excellent choice for your cabin sole providing it is fully under cover. It is designed for interior use only and as such will not tolerate very wet conditions. It can be adhered directly to your current boards as long as they are smooth and sound. Tek -Dek interior is 2mm thick and comes in 3' long planks either 51mm or 102mm wide as standard, however should you require boards of a different width, this can be catered for.
James Thompson - OBAN
Yes. The internationally reknown Flexible decking can withstand regular pressure washing.
DeGrasse Marine - Islesboro, Maine USA
Yes Tek-Dek is ideal for use below decks. First class results can be achieved by the DIY enthusiast by paying attention to detail and not rushing the project. Tek-Dek is flexible enough to deal with any dips and runs with ease.
Jim Twyman - Santa Fe NM USA
Tek-Dek Flexible is slightly heavier than the same thickness teak deck. Tek-Dek weights around 6Kg per Sq meter - similar to a 9mm teak deck. Tek-Dek has comparable heat retention to that of teak, however we are working on a sand colour especially designed to deflect the heat in hotter climates.
Peter White - Peterborough
Yes, Tek-Dek is suitable for any job of that nature. The wood must however be sound and rot free. Areas that are not should be removed and filled with body filler and faired before the Tek-Dek is installed.
Keith Broley - Lechlade
It is very unlikely that the single part MS-Polymer based polyurethane adhesive will react with your old deck paint. However we would suggest that you try a small test area just to be certain.
John Willis - Guernsey
Tek-Dek is a maintenance free decking product. Marks can be cleaned off using hot soapy water or by jet-washer. Gouges or scratches can be removed by light sanding with 40 grit sandpaper.
Mr. O'Connell - Telford
NO, there is no wood content in Tek-Dek Flexible. It is made of High Grade P.V.C and contains quality pigments and U.V. stabilisers, ensuring it keeps its good appearance for decades.
Mr. J Fisher - Rugby
Yes, unlike most of Tek-Dek's competitors, this product is 100% U.K. based. Not only in its manufacture, but in its design, storage and distribution.
John Woodger - Co. Cork
The cheapest way to a great new Tek-Dek is for you to send us paper templates of the sections you require replacing. We will make these up at our factory in Hampshire and then have them delivered to you - anywhere in the world, together with all the adhesives and sundries required for you to make the final installation yourself.
Pete - Portsmouth
This is an area we are looking into at the moment - with a view to start some training courses. In the meantime we do have a DVD on sale that shows a boat being fully installed in detail from start to finish.