![Electrical](/web/20140526062759im_/http://www.tcschandlery.co.uk/images/categories/2_large.jpg)
Electrical
5511E Dual Circuit Plus Battery Switch
Simultaneously switches two isolated battery banks or combines battery banks to all loads •Make-before-break contact design allows switching between battery banks without power interruption •Ignition protected—safe for installation aboard gasoline powered boats •Case design allows surface or rear panel mounting
9003E Single Circuit ON/OFF Battery Switch
Switches a single battery to a single load group •Ignition protected—safe for installation aboard gasoline powered boats •Case design allows surface or rear panel mounting
Battery Box
2 Sizes available: Small - 310x230x250 Large - 430x220x250
Battery Changeover Switch
Required for boat electrical systems fed by two batteries. This robust plastic boat battery changeover switch enables you to switch over from the first battery to the second or to operate or charge both batteries simultaneously. The switch is suitable for 6V, 12V and 24V electrical systems. Maximum Load: 6V: 300A (constant) / 350A (peaking briefly).12V: 150A (constant) / 175A (peaking briefly).24V:...
Battery Isolator Switch
Basic battery isolation switch intended for isolating a single battery. Can also be used for controling high current devices such as winches, windlasses, capstans etc. Maximum Voltage: 24 Vdc Maximum Surge Current: 500Amps for 10 seconds @ 12Vdc Maximum continuous current: 100Amps/140Amps @ 12Vdc Dimensions: 75mm x 60mm diameter Terminal Stud Diameter: 10mm
Blue Sea Systems e-Series Selector Battery Switch
Switches isolated battery banks to all loads or combines battery banks to all loads Make-before-break contact design allows switching between battery banks without power interruption Ignition protected—safe for installations with inboard gasoline and diesel engined powered boats. Case design allows surface or rear panel mounting
Mini Battery Switch
Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...
Mini Battery Switch (Key Version)
Ignition protected - Safe for installation aboard petrol powered boats Case design allows surface, front panel, or rear panel mounting Isolating cover with snap-on sections protects rear contacts Specifications Inrush Rating: 0.25 sec (10 repeats)* 1500 Amperes DC Cranking Rating: 9.75 sec (10 repeats)* 700 Amperes DC Intermittent Rating: 5 min (UL 1107) 500 Amperes DC Continuous Rating:...
Spare red key for battery isolator
Spare red key for battery isolator
3 Amp Plug & Socket
3A chrome plug and socket with plastic cap.
5 Amp Plug & Socket
5A chrome plug and socket with plastic cap.
Cigar Lighter Plugs & Sockets
PLUG: Description: Black plastic housing with non-corrosive metal parts - nickel plated phosphor bronze. Solderless screw terminals, - brass screws. Cable restraint. The spring loaded contact tip is exceptionally wide to avoid sparking and heating. The sharp edges of the side spring - the negative carrier - help in holding this plug better connected in the universal Car Lighter Socket Weight: 22...
Dual USB Socket & 12V Adaptor
Plug into a 12V socket to give 2 x 12V sockets, and two USB ports
Multi Cigar Plug Outlet
The 12 volt 3 Way adaptor allows three 12 volt products to be powered through one cigar lighter socket. 2 metre lead Plugs into a lighter socket of a 12 V battery.
Standard Buccaneer Bulkhead Socket
Bulkhead sockets, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with Flex Cable Connector ?Screw Fixing Flange ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Supplied with sealing gasket and screw sealing grommets ?RoHS Compliant
Standard Buccaneer In-Line Flex Plug Connector
Flexible plug, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with In-Line Flex or Panel Mounting Versions ?Screw Locking Ring ?Pin or Socket Versions ?Leading Earth on 3 pole connectors ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Standard Cable Acceptance (2 to 9...
Standard Buccaneer In-Line Flex Socket Connector
In-line sockets,available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Mates with Flex Cable Connector ?Pin or Socket Versions ?Leading Earth on 3 pole connectors ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Standard Cable Acceptance (2 to 9 pole) 6-8mm, ?RoHS Compliant
Standard Buccaneer Low Profile Socket
Low profile socket, available in 2,3,6 Pin & Co-ax. Buccaneer waterproof dry plugs and sockets are designed to withstand immersion to a depth of 10mtr and are unaffected by salt water and oil. Screw Flange Fixing ?Poles 2, 3, 4, 6, 7, 9, 12, 25 or BNC ?Mates with Flex Cable Connector ?Supplied with sealing gasket and screw sealing grommets ?RoHS Compliant
150 Amps Common BusBar with Cover
150 Amps Common BusBar 8-32 Screw terminal with cover The industry standard busbar for positive distribution The industry standard busbar for the collection of negative or AC ground circuits Specifications: Voltage Rating 300 Volts AC Maximum / 48 Volts DC maximum Base Material Reinforced Polycarbonate Studs Stainless Steel, 1/4"-20, torque 72 in-lbs, accepts 1/4" (M6) ring terminal Continuous...
30mm Glass Fuse Holder
30mm Glass Fuse Holder 17amp Rating
30mm Glass Fuses
30mm Glass Fuses Sold in packs of 5
Battery Terminals
Material: Tinned brass Sold in pairs
Blade Fuse
Blade Fuses sold in packs of 4
Blade Fuse Holder
Blade Fuse Holder
Busbars
A range of high quality nickel plated brass busbars, manufactured by Index Marine, available in 6 way and 12 way. All models mounted on plastic feet for easy fixing.
Copper Tube Stud Terminals
Copper tube stud terminals Sold in pairs
DG20P Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DG21P Split Seal Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DG22P Split Seal Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DG30P Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DG40P Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DG8P Cable Gland
The DG series plastic cable glands are made from UV stable nylon. They are available in an aperture range of 8mm to 40mm and have an attractive, low profile shape.The range has passed independent rigorous dust and waterproof testing to IP 68. Each unit is supplied with clear fitting instructions and A4 stainless steel fixings. DG Deck Glands are easy to fit and do not require the removal of fitted...
DR1 Cable Gland
The DR1 cable gland can be drilled in the same way as the M Series glands, to accept a variety of cables. Following the instructions provided, simply drill holes of appropriate diameter through the 12.5mm thick diaphragm. Stainless steel top. Plastic base. Aperture: 65 x 18.5mm. Dimensions: Length: 94mm. Width: 44mm.
Midi fuse holder max fuse size 16mm2
Individual fuse holder, accepts strip fuses or midi fuses. The cable connections are made using the 2 protruding nuts & bolts provided. Maximum cable size for this unit is 6mm.
Midi fuses
Compact fuses ideal for panel feeds, windlasses, and thrusters, tin-plated contacts for corrosion resistance
Multi Connection Battery Connector
Serves as buss bar and can safely connect up to 4 devices to the battery directly. Sold in pairs.
Pre Insulated Butt Connectors
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Red Insulation: Conductor size 0.5-1.5mm² / 22-16awg. Blue Insulation: Conductor size 1.5-2.5mm² / 16-14awg. Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg Sold in a pack of 10
Pre Insulated Female Push on Connectors Full Insulation
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Red Insulation: Conductor size 0.5-1.5mm² / 22-16awg. Blue Insulation: Conductor size 1.5-2.5mm² / 16-14awg. Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg Sold in a pack of 10
Pre Insulated Male Tab Terminals
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Red Insulation: Conductor size 0.5-1.5mm² / 22-16awg. Blue Insulation: Conductor size 1.5-2.5mm² / 16-14awg. Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg Sold in a pack of 10
Pre Insulated Ring Terminals
High quality pre insulated terminals. All the terminals are U.L. or C.S.A. approved. Manufactured from tinned copper complete with anti vibration rings (except forks & rings) Red Insulation: Conductor size 0.5-1.5mm² / 22-16awg. Blue Insulation: Conductor size 1.5-2.5mm² / 16-14awg. Yellow Insulation: Conductor size 4.0-6.0mm² / 12-10awg Sold in a pack of 10
Rotating CableCaps
The Blue Sea Rotating Cable Caps feature a top that rotates 360 degrees to allow cable entry from any angle For batteries with integral marine wing nut posts Sold as a pair.
Snap On Battery Connectors
The battery connectors are heavy-duty products equivalent to those designed for permanent connection. The battery can be easily disconnected and moved to another car, leisure vehicle, boat, etc., or taken indoors in cold weather. No tools needed, as is the case when connecting or disconnecting traditional terminals. With Quick connectors the battery can be disconnected in a few seconds, thus...
Tinned Flexible Battery Cable
• UL Listed • 105°C 600V (Multi-Rated) • CSA Certified Specification • This product is designed to meet the standards of UL & ABYC. • Is suitable to be used for battery cable, inverters, chargers and bow thrusters • 105°C 600V (multi-rated) and extremely flexible to work with. Insulation • This product offers a unique flame retardant polyvinylchloride compound (VW-1) & is moisture, abrasion,...
Tinned Multiple Core Flexible Cable
Specification • This specification covers the requirements for flexible multi conductor tinned copper flame retardant boat cable. • Cobra boat cable meets or exceeds ABYC, UL and Coast Guard requirements. • Cable is rated at 105°C, 75°C wet (BC-5W2) 600 Volt UL 1426 for AC and DC circuits
Tinned Single Core Cable
SINGLE CORE TINNED CABLES Low voltage, high performance wiring cable. Technical Specifications • Tinned copper conductors provide excellent resistance to corrosion • Good resistance to petrol, diesel, lubricating oils and diluted acid • Hard grade PVC insulation offers good resistance to abrasion and cut though • Suitable for use at temperatures -40ºC to +105ºC • Suitable for 12V and 24V systems...
Weatherproof Junction Box
Neoprene rings ensures waterproof seal. Complete with 8 pole connector strip. Overall length including rubber ends - 150mm Width - 75mm Height inc screw -45mm
12V Energy Efficient Utility Light
This Water Proof Light Can Be Suspended To Provide Light For Entertainment, Chart Reading, Working Or Use As A Courtesy Light. With A Automatic Switch On At Dusk Off At Dawn. 2 Bulbs: A High-Efficiency 0.1A Bulb With Visibility 2NM And A 0.24A Bright Bulb. 2 Function Lens: Fresnel Lens For Visibility 2NM and Clear Bottom For Area Lighting. Come With 15' Cord, Cigarette Lighter Plug, Hanging Bracket...
Adjustable Deck Light
Halogen deck floodlight for exterior mounting, for large area homogeneous illumination of deck and superstructures. FF design for double light output. With an extending lens retaining rim for protection of lens. Light aperture 135mm x 75mm. With M10 mouting screw for upright or pendant attachment.