VHF Antennas

Glomex 4 Way Nylon Ratchet Mount (Handle) Made from UV Resistant reinforced nylonFeatures a handleSlot for GPS cable and feed-through for coax cableIdeal for use with antenna's up to 9' in height1"x14 Standard thread

Glomex Pulpit Rail Mount Non Adjustable (For GPS) Made from UV Resistant reinforced nylon For installation of GPS antennas on either vertical or horizontal rails 7/8" (22mm) and 1" (25mm) Ideally used with RA129 extention 1"x14 Standard thread

Glomex Stainless Steel Universal Mount Made from electropolished stainless steelIdeal for use with most antennas and extentions1"x14 Standard threadHeight: 100mm (4")

Glomex 4 Way Stainless Steel Ratchet Mount Robust, Heavy Duty Stainless Steel designIdeal for deck or bulkheadSlot for GPS cable and feed-through for coax cable1"x14 Standard thread

Swivel type nylon rail mount vertical, horizontal or slanted rails Ratchet action for antenna fold-down Easy installation on 22mm (7/8”) and 25mm (1”) rails Complete with rubber gasket Made from durable, white nylon

White nylon mount with standard thread to suit GPS and VHF antenna. • White nylon, 25mm high • 70mm diameter base • Suitable for moderate duty operations

Stainless Steel Extension Pole Heavy duty, 316 grade stainless steel Extension Pole with 1in x 14TPI thread, male and female fittings. Ideal for GPS and other antennas. 1 foot length

An ultra flexible GRP marine antenna suitable for smaller motor cruisers and fishing boats. The nylon ratchet base is suitable for cabin top mounting and allows the antenna to be laid flat when not in use. Supplied with a minimum 4.5mtr co-ax cable and plug suitable for all VHF radio's. Requires 4x M6 fixings

Budget sportsboat/fishing boat VHF antenna. Flexible GRP whip antenna with nylon ratchet base- cable and plug. Easily folded down when towing. Supplied with a minimum 4.5mtr co-ax cable and plug suitable for all VHF radio's. Requires 4x M6 fixings. VHF antenna with natural fiberglass finish. Frequency 156-162 Mhz S.W.R. 1-50 Gain 3 dbi Impedance 50 ohm Max Imput 25W DC Closed YES Lenght: 1-5 mt (5...

Perfect for most sailing yachts this 1mtr stainless steel whip antenna is suitable for mast mounting. The stand off bracket can easily be riveted or screwed to the mast Supplied with a minimum 18mtr co-ax cable and plug to suit all VHF radio's. Bandwidth 156-163Mhz impedance 50ohm Weight 350g

The AM/FM is a common VHF transmission mode. AM/FM bands are less prone to disturbances and interferences assuring a clear transmission and reception of signals. AM/FM antennas are often used to listen to radio stations also during navigation. The RA128 is a 1,5 m (5’) AM/FM antenna aimed for installation on motorboats and small yachts. Its shape is identical to that of the RA112 (VHF) and RA127...

The CLASSIC series antennas are designed to fit the specific needs of all motorboats. RA112 is the ideal choice for excellent performance and reduced size, just 1,5 m (5') height. It's a VHF antenna equipped with white nylon ferrule and polyurethane tube resistant to UV-rays.

The AM/FM is a common VHF transmission mode. AM/FM bands are less prone to disturbances and interferences assuring a clear transmission and reception of signals. AM/FM antennas are often used to listen to radio stations also during navigation. The RA1288 is a 2,4m (8’) AM-FM antenna aimed for installation on motorboats and large yachts. The shape is identical to that of RA1206CR (VHF), RA1278...

The CLASSIC series antennas are designed to fit the specific needs of all motorboats. RA1206CR is an economical and light VHF antenna, containing solid brass components inside. It's equipped with chromed bushing and double-layer painted tube with polished polyurethane resistant to UV-rays.

V-Tronix Stainless Steel Whip with Hawk Wind Indicator The Hawk was designed and developed to meet the requirements of the most demanding sailors. It features the popular V-Tronix solderless connector system - for easy installation and end-of-season dismounting – and is packed in an attractive blister pack with fitting instructions in 17 languages. These ever-popular masthead antennas have become...

V-Tronix Whipflex Stainless Steel Whip The Whipflex features the popular V-Tronix solderless connector system - for easy installation and end-of-season dismounting – and it’s packed in an attractive blister pack with fitting instructions in 17 languages. This ever-popular masthead antenna has become the industry’s benchmark for any sailing boat fitted with a VHF radio. Its reputation...

V-Tronix Heliflex Stub Antenna This popular V-Tronix masthead antenna is perfect for race boats or for sailors who want an antenna with the lowest possible windage. The Heliflex performed very well in an independent test conducted by “Sailing Today” – and their conclusion was: “...It actually performed very well and almost managed to hold its own against the other whip antennas”....

V-Tronix Raider Antenna for Rigid Inflatable Boats Designed specifically for R.I.B.s (Rigid Inflatable Boats), this antenna has a short helical design to avoid snagging and excessive whip action.

V-Tronix Shorelink Emergency Antenna V-Tronix Shorelink Emergency VHF Antenna for instant set up if your main antenna becomes broken or disabled.

Receive Only Splitter The ASR 100 is designed to be used with any AIS Receiver. Installation is quick and simple with interconnecting cables supplied to link the AIS Receiver and the VHF to the ASR 100. Reception on the AIS Receiver and the VHF Radio is now possible simultaneously. AIS reception will be blocked when you are transmitting on the VHF Radio.

Transmit and Receive Splitter The AST 200 is desgined to be used with a Class B AIS transponder. Installation is quick and simple with interconnecting cables supplied to link the AIS transponder and the VHF Radio to the AST 200. When in operation indicator LED’s are provided to show the current status of the unit. An additional antenna output socket is provided to allow connection to the boats...

An AIS receiver or transponder requires a VHF antenna, but Digital Yacht's new SPL2000 AIS-VHF antenna splitter allows an existing antenna to be used for both the AIS and VHF (DSC) and even with an AM/FM radio. Unlike most simple splitters, it can also be used with a class B transponder system and it incorporates special circuitry to ensure safe operation of the two transmitting devices. The unit...

Glomex PL259 Connector Gold Plated, Solderless for RG58 Solderless Gold plated Twist on PL259 Male connector ideal for use with RG58C/U

The RA201 splitter allows to use just one VHF antenna to simultaneously receive the AM/FM and AIS radio signals; furthermore, the VHF transceiver can also be used. It is a compact, economical and safe element, easy to install in any place. It requires only a 12V power supply with maximum of just 25 mA power consuption. It is provided with a coaxial input for the antenna and three outputs for VHF,...

Rugged waterproof Co-Ax deck plug and socket for RG-58 coaxial cable that provides a convenient connection particulary useful when stepping/unstepping masts. The fittings are made from nickel plated brass with silver plated contacts for extra efficiency.