Steering & Bow Thrusters

The Ultraflex T-67 rotary helm features a standard 3/4" taper to suit Ultraflex,  Morse & Telefex steering wheels. It is generally accepted that the T67 Helm and M-58 Steering cable are adequate for outboard engines up to 55hp however in cases of more frequent and harsher use the T-71/T-73 Ultraflex Helm with M-66 Steering cable would be advisable due to the more robust construction of the...

The Ultraflex T85 rotary helm features a standard 3/4" taper to suit Ultraflex, Morse & Telefex steering wheels. Ultraflex T-85 steering helm suitable for larger outboard and inboard engines.  In cases of more frequent and harsher use the T-71/T-73 Ultraflex Helm with M-66 Steering cable would be advisable due to the more robust construction of the helm units. Includes: 90º Bezel...

The Ultraflex T71FC rotary helm features a standard 3/4" taper to suit Ultraflex, Morse & Telefex steering wheels. With the planetry gearing system within the helm unit this system is particularly suited to higher horsepower outboard and inboard engines and in situations where heavy wear and tear is expected. Features: Fast connect simple installation Optional 90 deg or 20 deg installation Standard...

The Ultraflex T73NRFC rotary helm features a standard 3/4" taper to suit Ultraflex, Morse & Telefex steering wheels. T73 non-reversable steering helm unit: Easy and safe steering : a patented nonreversible mechanism eliminates the continuous load on the operator caused by the propeller torque. Fast connect- simple installation. Compact rotary helm unit: the central location of the steering shaft...

Ultraflex X34 90-Deg Steering Bezel for T71 & T73 helm units

Ultraflex X35 20-Deg Steering Bezel for T71 & T73 helm units

Ultraflex Thermoplastic antishock steering wheel. Standard 3/4" taper to suit Ultraflex, Morse & Telefex steering helms. Hub included Meet with the EN 28848 and ABYC P22 standards Diameter 342mm

All ULTRAFLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards. Features: Compact diameter - 280 mm (11") Thermoplastic antishock material Soft touch grip Standard 3/4’’ taper Complete with hub Meet with the EN28848 and ABYCP22 standards

Ultraflex thermoplastic antishock steering wheel Standard 3/4" taper to suit Ultraflex- Morse & Telefex steering helms. Hub included Meet with the EN 28848 and ABYC P22 standards Diameter 350mm

All ULTRAFLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards. Features: Thermoplastic antishock material Diameter 350 mm - 13.8" Standard 3/4’’ taper Complete with hub Meet with the EN28848 and ABYCP22 standards All Antigua steering wheels are provided...

Standard 3/4" taper to suit Ultraflex, Morse & Telefex steering helms. Hub included Meet with the EN 28848 and ABYC P22 standards Diameter 350mm

All ULTRAFLEX steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Standard 3/4" taper to suit Ultraflex, Morse & Telefex steering helms. Hub included Meet with the EN 28848 and ABYC P22 standards 2 Sizes Available - 345 & 400mm Diameter.

Steering wheel with five spokes,handgrip and hub in brilliant stainless steel. The section of the circle is diameter 25 millimeters while the spokes are diameter 14 millimeters, they are with six spokes. Designed to fit helm units with 11/16th or 3/4" tapered shafts IT IS APPROVED AND CERTIFICATED CE BY: RINA N°DIP26897 - UNI EN 28848 - UNI ISO 29775 3 Sizes Available - 500,600 and 800mm Diameter

Traditional Wheel, Mahogany & Brass, 6 Handle, Brass Hub Cap Included. 2 Sizes available 490mm Diameter 600mm Diameter

The Ultraflex M58 Steering Cable is recommended for use with outboard motors up to 50hp. Using the tried and tested push/pull operation these rotary steering cables are completely reliable and suitable for use with for use with Ultraflex T67 steering helm also compatible with Teleflex & Morse Cable steering systems. Convert to Ultraflex or replace your existing steering cable and notice an immediate...

The Ultraflex M66 heavy duty Steering Cable is recommended for use with outboard motors above 50hp and Inboard engines too. Using the tried and tested push/pull operation these rotary steering cables are completely reliable and suitable for use with Ultraflex T85, T71FC & T73NRFC steering helms. Convert to Ultraflex or replace your existing steering cable and notice an immediate difference, positive...

Transom Support Kits S61 & S62 with stainless steel tube

90 Degree Rudder support S55

Ultraflex splashwell fitting kit S40. splashwell kit has stainless steel plates and a aluminium tube The splashwell fitting kit allows the steering cable to pass through the splashwell and on to the engine using the ultraflex clevis kit A75.

Stainless steel steering link arm A73 To fit Mercury engines & link arm A74 to fit Johnson, Evrinrude and OMC engines.

Ultraflex steering cable clevis A75

AWYRE type steering grommet & ring R2 B - 105mm Diameter R1 B - 152mm Diameter

All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller- which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually no cavitation and reduces operating noise to a minimum. Motor: 1.5 KW / 2hp Voltage: 12v Thrust (12v model): 250N / 25kgf Tube diameter: 110mm Batteries required: 12v - 1x55Ah

All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually no cavitation and reduces operating noise to a minimum. Motor: 1.5 KW / 2hp Voltage: 12v Thrust (12v model): 35 kgf / 350 N Tube diameter: 150mm Batteries required: 12v - 1x 70Ah

All Vetus electric bow thrusters are fitted with a specially-designed 6-bladed propeller, which optimises efficiency and increases thrust. The blade profile allows the propeller to achieve virtually no cavitation and reduces operating noise to a minimum. Motor: 3 KW / 4 hp Voltage: 12v or 24v (Please choose from drop down menu) Thrust (12v model): 55 kgf / 550 N Thrust (24v model): 60 kgf / 600...

Panel connection cable for bow thrusters, fitted with multi-plugs. Available in 6m, 10m, 16m, 18m or 20m lengths.

Fuse holder suplied with a protective cover. For use with Vetus ZE fuses.

Vetus bow thruster tunnels are available available in glassfibre reinforced polyester, steel or aluminium, in lengths of 0.75m, 1m, 1.5m, 2m & 3m. Outer diameters vary depending on material, but are usually around 10mm greater than the internal diameter.

This joystick panel is suitable for controlling one bow thruster or stern thruster. It is available in two versions, one without; and one with a time lapse device.

Vetus Slow-blow fuses, encapsulated in glass so as to prevent fire. Suitable for bow thrusters, windlasses etc.. Fuse sizes available: 40A, 50A, 63A, 80A, 100A, 125A, 160A, 200A, 250A, 300A, 355A, 425A. For use with Vetus fuse holder ZEHC100