Sail Handling
Halyard Diverter Wheel
A halyard diverter wheel, which prevents the genoa halyard from twistingaround the spar. Used if the angle between the halyard and the spar is inferior to 10°. - for a masthead rig
Lightweight Lazy Jack Kit
Manufactured by Barton Marine, the lazyjack kits allow mainsails to be easily reefed and stowed by restraining the sail between lines running from the mast near the hounds to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape. BARTON LIGHTWEIGHT LAZYJACKS: Barton have recently introduced the new lightweight Lazy Jacks available as either four leg, or six leg cascade...
Long Link Plates
The long link plates enable fitting of the Profurl manual reefing by lifting the system to avoid interference with the anchor and reduces the sail chafe on the lifelines. Several sizes are available. Material Grade 316L stainless steel
Manual Furling Systems
Profurl manual furling systems - Cruising range Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the world. Cruising reefing-furling systems are designed to last and integrate the best of Profurl's proven technology to guarantee both your safety and your sailing pleasure. The...
Plastimo Additional Spar Package 1.5mtr (406s-608s-810s)
Additional spar package- 1.50 m includes : 1 alloy spar- 1 plastic spar- 1 quick-coupling sleeve with screws.
Plastimo 406s Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering. Designed for 4 to 6 metre boats, the 406s headsail reefing meets the needs for smaller yachts and trailer sailors. Very easy to use and virtually maintenance free, the Plastimo jib reefing is a reliable crew member which contributes to your sailing performance.
With a few...
Plastimo 609s Turnbuckle Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering. Designed for 6 to 9 metre boats, the 609s headsail reefing meets the needs for small to medium sized yachts. Very easy to use and virtually maintenance free, the Plastimo jib reefing is a reliable crew member which contributes to your sailing performance.
With a few basic...
Plastimo 811s Headsail Reefing System
Plastimo 811S- Jib reefing for boats from 8-11m (26-36') The 811 drum cheeks swivel through 360 degrees ensuring safe maneuvers throgh a regular feeding of the tiller rope. The drum core is manufactured from highly resistant aluminium combineing performance ans lightweight features. Drum and halyard swivel are equipped with torlon and delrin ball bearings for increased performance and mechanical resistance....
Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length. Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions. All you need to provide is a line and a cleat or stopper....
Slab Reefing Kits
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing. Manufactured from stainless steel and 'Spectro' anodised aluminium. Available in two sizes and complete with sufficient length of 'T' track and end stops.
Stainless Steel Halyard Feeder for 406
A stainless steel halyard feeder, for Plastimo 406 roller reefing. - for a masthead or fractional rig
Stainless steel halyard feeder for 608 & 810 roller reefing
A stainless steel halyard feeder, for 608 & 810 Plastimo roller reefing. - for a masthead or fractional rig.