Oil Pumps & Extractors

Electric oil sump pump, complete with plastic pipes, electric leads and battery clips.  Warm engine oil first and then insert nylon tubes into the dipstick tube and start the oil pump to extract old oil from engine sump. 12v 110w 9amps

Re-useable absorbing Pads for Bilge Absorbs oil, transmission fluid and fuel from engine pan so it can't get into the bilge Holds up to 3 quarts of oil Can be wrung out and reused Can be removed easily without dirtying hands Helps protect the environment Hand cords are provided to secure in bilge

The Seago EXTRACT-IT SEA6 is a very clever vacuum oil extractor pump which can be used to change oil with no fuss or mess on boats, cars, motorbikes & anything that has an engine. Between 10 to 20 strokes of the pump creates a powerful vacuum which can then suck out the dirty engine oil or any other inaccesible areas such as the bilges. The dirty oil is sealed inside the tough durable container...

Brass oil sump pump for extracting engine oil from inboard engines. Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole. The shorter length of nylon tube can dispense the used oil in to a separate container. Gently pump to draw up the used oil in preparation for a complete oil change. The oil pump is...