Inboard Engine Accessories
Metalised faced acoustic insulation - Silver faced
Metalised facing with 25mm grey self-extinguishing acoustic foam, 5kg/m2 polymeric barrier and 7mm grey self-extinguishing acoustic foam. Can also be supplied with self-adhesive backing. Sheet dimensions: 1000 x 600x 30mm. This foam does NOT meet MCA standards for engine compartments For engine room insulation
Polyurethane faced acoustic insulation - Black faced
Polyurethane faced with 25mm of black class O non-flammable acoustic foam, 5kg/m2 polymeric barrier and 7mm black class O non-flammable acoustic foam. Which fully meets the RCD (recreational craft directive). Sheet dimensions: 1000 x 600x 30mm. Black faced. This foam does NOT meet MCA standards for engine compartments. For engine room insulation
MCA Engine room acoustic foam - Foil Faced
Foil faced with 25mm of black class O non-flammable acoustic foam, 5kg/m2 polymeric barrier and 7mm black class O non-flammable acoustic foam. Which fully meets the RCD (recreational craft directive). Sheet dimensions: 1000 x 600x 30mm.
MCA Engine room acoustic foam - White Faced
White PVC with 25mm of black class O non-flammable acoustic foam, 5kg/m2 polymeric barrier and 7mm black class O non-flammable acoustic foam. Which fully meets the RCD (recreational craft directive). The facing is a 380gsm light reflective hard warring reinforced PVC, its easy to clean which is ideal for engine compartment applications. Sheet Dimensions: 1000 x 600x 30mm
Heavy Duty Spray Adhesive
Heavy Duty adhesive spray which is water resistant and heat resistant up to 50°c. Ideally suited to foam based materials, but not plastic based materials. Used in: Display mounting, upholstery, carpeting and allied trades. 500ml Spray Can.
Jabsco Pump Impeller 1210-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 1414-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 17937-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 18777-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 21414-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 22405-0001-P
Jabsco Flexible Neoprene Impeller Kit with assorted gaskets Jabsco flexible impellers can be fi tted to most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco Pump Impeller 4568-0001-P
Jabsco Pump Impeller 4568-0001-P
Jabsco Pump Impeller 653-0001-P
IMPELLER & GASKET KIT Includes Screw
Jabsco Pump Impeller 673-0001-P
IMPELLER & GASKET KIT Includes Screw
Jabsco Pump Impeller 920-0001-P
IMPELLER & GASKET KIT Includes Spline Plug
Jabsco Pump Impeller Removal Tool 50070-0040
Impeller removal tool: 040/080/120- size pumps Impeller diameters up to 65mm (2 9/16")
Engine Fuel Water Separator
Water and contaminants accumulating in the fuel tank can often cause engine failure. Suitable diesel engines up to 200hp. The separator filter has an aluminium head unit with replacable fuel filter and a transparent plastic water bowl. Supplied with a drain plug. Fuel line connections supplied separatley.
Engine Cooling Water Inlet Strainer
Engine inlet water strainer with plastic body and a stainless steel filter. This smaller engine water strainer has a built in side mount bracket, and can be used for 3/4", 25mm and 1 1/2" hoses. Max flow rate is 150 litres per minute.
Heavy Duty Engine Inlet Water Strainer
Engine inlet water strainer with plastic body and stainless steel filter. This larger model has a max flow rate 300 litres per minute and has two 1 1/2" BSP female ports. Varying sizes of hose tail can be used on this water strainer and these can be found in the water section of this website. Supplied with aluminium mounting bracket
Engine Water Inlet Strainers
Inexpensive ABS plastic bodied water filter with nylon filter element. Makralon clear cover for ease of inspection. Threaded BSP female.
Exhaust Hose - Lloyds Approved
• Lloyds approved • Vacuum: 0.8 Bar • Lining: Black, exhaust gas, salt water resistant EPDM rubber • Reinforcement: Synthetic textile fabrics and double steel helix wire • Cover: with black corrugated, resistant to heat, salt water, ozone, ebrasion, EPDM rubber Priced per meter
Grease Cups
“Stauffors” type grease cups in hot stamped brass. Male Dia.OA Max Height BSP 1?8" 18mm 29mm 1?8" 33mm 40mm 1?4" 33mm 40mm 1?4" 40mm 42mm
Quick Release Brass Greaser
Brass lubricator for stern tubes, rudder bearings etc. Bulkhead or floor mounted. Capacity: 150ml (5fl oz.). Dimensions: Base width 80mm (31?8") Projection 70mm (23?4") Base height 27mm (1") Outlet at base front 1?8" BSP threaded OA height extended 288mm OA height closed 178mm Includes lubricator kit consisting of: 2 x 1?8" BSP connectors, 1 x 1?4 BSP connector & 3m nylon hose.
Stern Gland Packing
PTFE gland packing. Approx length depending on size:450-550mm
Vetus Type K Engine Mounts
Vetus TYPE K engine mounts For smaller engines, up to appr. 60 kW (8O HP). Priced and Sold indivdually. The torque of an engine is one of the deciding factors for determination of the load applied to the Vetus engine mounts. When more powerful engines are installed, it is important to use the following formula to define the load per support in kg (4 supporting points). engine weight in...
Water Lubricated Brass Shaft Bearing 1 Inch Shaft
Shaft Bearing Brass Shell Shaft Diameter 1" Outside Diameter 1 3/8" Overall Length 4"
Water Lubricated Brass Shaft Bearing 1 Inch Shaft x Overall Diameter 1 5/8 inch
Shaft Bearing Brass Shell Shaft Diameter 1" Overall Diameter 1 5/8" Overall Length 4"
Water Lubricated Brass Shaft Bearing 3/4 Inch Shaft
Shaft Bearing Brass Shell Shaft Diameter 3/4" Outside Diameter 1 1/4" Length 3"
Water Lubricated Shaft Bearings
Countrose bearings are manufactured using a specially compounded synthetic rubber lining which is moulded into a strong outer shell. The lining of the bearing has shaped grooves, or flutes, designed specifically to optimise water lubrication, giving very low friction and helping to maintain hydrodynamic lubrication even at low speeds and high loads. The bearings support the shaft and at the same...
WS180 Water Seperator/Fuel Filter
The WS180 is suitable for petrol & diesel. Connections:M14 x 1.5 female thread Capacity:180L/Hour Weight: 0.7kg Size: H207 x D85mm
Plastic Waterlock
Plastic waterlok suitable for 40/45 & 5omm exaust hose. Size:640L x 225W x 230H
Exhaust Gooseneck
Anti syphon gooseneck which prevents water enetering the engine via the transom. Supplied with stepped hose connection to suit 40 mm, 45 mm or 50 mm exhaust hose and plastic fixing straps. Hose Size(mm)40 - 45- 50 Body width (mm)110 Height (mm) 480 Weight (kg) 0.7
Vetus Anti-Syphon Vent
AIR VENT Air vent suitable for hoses of Ø 1/2", 3/4", 1" and 1-1/4" I.D. Material of housing: synthetic. If the injection point of the cooling water line is situated at a height less than 6" above the water line, then - when the engine is stopped - there is a risk that, as a result of siphoning, the cooling water may enter the engine. Such siphoning may be avoided by positioning a VETUS air vent...
Vetus Exhaust Gooseneck
This platic goose neck prevents seawater from entering into the engine via the transom connection.
Heavy Duty Stainless Steel Hose Clamp
Heavy duty stainless steel hose clamps.
Vetus NLP Waterlock
To compliment the well known and proven range of LP waterlocks, VETUS has now introduced several new models, type NLP, made of injection-moulded plastic materials. These have the benefits of being durable, corrosion proof and light in weight. The new NLP waterlocks are of dual stage construction, featuring upper and lower chambers with a horizontal partition plate and a riser tube through the centre....
Rubber Transom Exhaust Connection
TRANSOM EXHAUST CONNECTIONS WITH CHECK VALVE (SYNTHETIC) Ø 40 - 90 MM. The exhaust hose can be fitted directly to this transom connection
12v Electric Oil Change Pump
Electric oil sump pump, complete with plastic pipes, electric leads and battery clips. Warm engine oil first and then insert nylon tubes into the dipstick tube and start the oil pump to extract old oil from engine sump.
12v 110w 9amps
Boa Constrictor Wrench
This multi purpose rubber wrench with its 60cm rubber strap that is reinforced with 33 cords has a great tensile strength. The 20cm handle provides great leverage.Ideal for turning irregular shapes and opening anything from filters to bottle tops. BABY BOA: As versatile as the original boa butideal for working in confined spaces.
Starbrite Oil Absorbent Engine Pad
Re-useable absorbing Pads for Bilge Absorbs oil, transmission fluid and fuel from engine pan so it can't get into the bilge Holds up to 3 quarts of oil Can be wrung out and reused Can be removed easily without dirtying hands Helps protect the environment Hand cords are provided to secure in bilge
Seago Extract-It 6lt Vacuum Oil Extractor Pump
Vacuum oil extractor pump which is tough durable and removes dirty engine oil in to a sealed container. Supplied with 2mtr of hose for easy extraction of oil through the dip-stick hole of the engine.
Brass Engine Oil Sump Pump
Brass oil sump pump for extracting engine oil from inboard engines. Simply run the engine for a short time to heat the oil, then turn off engine and insert the longer of the nylon tubes in to the engine dipstick hole. The shorter length of nylon tube can dispense the used oil in to a separate container. Gently pump to draw up the used oil in preparation for a complete oil change. The oil pump is...
21" x 25" Bronze Propeller
21x25 LH bronze propeller with 1 3/4" taper. The propellor is in sound condition with some signs of wear