![Hardware](/web/20140526062912im_/http://www.tcschandlery.co.uk/images/categories/7_large.jpg)
Hardware
Barton double DO550 clutch
The Barton D0550 clutch is an all-new design for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant.
Barton K cam cleat - maxi
Barton K cam cleat - mini Manufactured from a composite Kevlar/Zytal material and available in 3 sizes. This advances material offers performance advantages over carbon fibre and conventional glass reinforced resins, K cams are very strong, lightweight an
Barton K cam cleat - midi
Barton K cam cleat - mini Manufactured from a composite Kevlar/Zytal material and available in 3 sizes. This advances material offers performance advantages over carbon fibre and conventional glass reinforced resins, K cams are very strong, lightweight an
Barton K cam cleat - mini
Barton K cam cleat - mini Manufactured from a composite Kevlar/Zytal material and available in 3 sizes. This advances material offers performance advantages over carbon fibre and conventional glass reinforced resins, K cams are very strong, lightweight a
C-Quip Stainless Steel Arch Cleats
Sleek and stylish cast 316 Stainless Steel Cleat with concealed under-deck mounting studs.
Stainless steel fixing nuts are included.
C-Quip Stainless Steel Fairleads - 125mm
Stainless steel straight fairlead manufactured in cast 316 stainless steel with a bright polished finish.
Length: 125mm
Fixings: 2x M5CSK
C-Quip Stainless Steel Fairleads - 150mm
Stainless steel straight fairleads manufactured in cast 316 stainless steel with a bright polished finish.
Length: 150mm
Fixings: 2x M6CSK
Cleatboots
Cleatboots, 2 pairs per pack.
Nylon Horn Cleat
No description currently available
Stainless Steel Hollow Base Cleat
316 stainless steel hollow base cleat.
Stainless Steel Silhouette Horn Cleat 152mm
Attractive cast 316 stainless steel open base Silhouette Horn Cleat.
Size: L152mm x H32mm
Fixings: 4x M5csk
Halyard Diverter Wheel
A halyard diverter wheel, which prevents the genoa halyard from twistingaround the spar. Used if the angle between the halyard and the spar is inferior to 10°. - for a masthead rig
Lightweight Lazy Jack Kit
Manufactured by Barton Marine, the lazyjack kits allow mainsails to be easily reefed and stowed by restraining the sail between lines running from the mast near the hounds to the boom. These lines can be slackened whilst sailing to avoid restricting sail shape. BARTON LIGHTWEIGHT LAZYJACKS: Barton have recently introduced the new lightweight Lazy Jacks available as either four leg, or six leg cascade...
Long Link Plates
The long link plates enable fitting of the Profurl manual reefing by lifting the system to avoid interference with the anchor and reduces the sail chafe on the lifelines. Several sizes are available. Material Grade 316L stainless steel
Manual Furling Systems
Profurl manual furling systems - Cruising range Reliability, toughness and long-life: Profurl's Cruising range of reefing-furling systems are designed for coastal cruising, blue water cruising, or even sailing around the world. Cruising reefing-furling systems are designed to last and integrate the best of Profurl's proven technology to guarantee both your safety and your sailing pleasure. The...
Plastimo Additional Spar Package 1.5mtr (406s-608s-810s)
Additional spar package- 1.50 m includes : 1 alloy spar- 1 plastic spar- 1 quick-coupling sleeve with screws.
Plastimo 406s Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering. Designed for 4 to 6 metre boats, the 406s headsail reefing meets the needs for smaller yachts and trailer sailors. Very easy to use and virtually maintenance free, the Plastimo jib reefing is a reliable crew member which contributes to your sailing performance.
With a few...
Plastimo 609s Turnbuckle Headsail Reefing System
The Plastimo jib reefing system stems from 40 years of expertise in high-pressure injection and composite materials engineering. Designed for 6 to 9 metre boats, the 609s headsail reefing meets the needs for small to medium sized yachts. Very easy to use and virtually maintenance free, the Plastimo jib reefing is a reliable crew member which contributes to your sailing performance.
With a few basic...
Plastimo 811s Headsail Reefing System
Plastimo 811S- Jib reefing for boats from 8-11m (26-36') The 811 drum cheeks swivel through 360 degrees ensuring safe maneuvers throgh a regular feeding of the tiller rope. The drum core is manufactured from highly resistant aluminium combineing performance ans lightweight features. Drum and halyard swivel are equipped with torlon and delrin ball bearings for increased performance and mechanical resistance....
Single Line Reefing Kit
The Barton Single Line Reefing kit makes reefing your mainsail a quick and easy operation - just lower the main to a predetermined mark on the halyard, tension the reefing line and re-trim the sail. Suitable for boats up to 9 metres in length. Supplied as boxed kit with all the parts and fixings required, together with full fitting instructions. All you need to provide is a line and a cleat or stopper....
Slab Reefing Kits
Barton Slab Reefing Kits are supplied with sliding blocks which are held in place with spring-loaded plungers allowing fine tuning for both cruising and racing. Manufactured from stainless steel and 'Spectro' anodised aluminium. Available in two sizes and complete with sufficient length of 'T' track and end stops.
Stainless Steel Halyard Feeder for 406
A stainless steel halyard feeder, for Plastimo 406 roller reefing. - for a masthead or fractional rig
Stainless steel halyard feeder for 608 & 810 roller reefing
A stainless steel halyard feeder, for 608 & 810 Plastimo roller reefing. - for a masthead or fractional rig.
Asymmetric Handle Tiller Extensions
EA Range Designed for the hardest conditions, to reduce the strain and increase the sheer enjoyment of helming Features and Benefits The Asymmetric grip improves helming performance in three ways: More feedback - for accurate and precise control More mobility - maintains the best helming position for optimum trim and visibility Less fatigue - correct helming position reduces back pain and...
BRS/50 Jammer Block
BRS/50 This jammer block is for situations where a fixed foot block can’t help: peeling spinnakers, or changing a sheet winch Features and BenefitsSpinnaker block with locking cam, ideal for changing sheet winch, sail changes and locking spinnaker sheets upwind. Cam can be tuned to the exact rope size. Lightweight webbing attachment strop for toe rail or pad eye. Safe Cam Load 160kg (352lbs)...
Organisers - T38 Range
T38 Spinlock T-Series Organisers lead multiple lines back from the mast to banks of powerclutches. Features and Benefits: Minimal overall length Efficient bearing Reduces winch effort and increases halyard life Modular end fairings for safe side loading Asymmetric version for reduced deck space and weight saving T38 and T50 can ‘stack’ for limited deck area or adding extra capacity Vari-camber...
PXR-BRACKET
PXR-BRACKET Mast mounting bracket for PXR0206 and PXR0810 Cam Cleats. Features and Benefits Hard Black Annodised Fits most sections on dinghies and keelboats upto 24ft.
Spinlock 2-6mm PXR cam cleat
The easiest cleat to release under load
Compact roller action cam cleat for easy release of high performance control lines
Lines: 2mm - 6mm (3/32" - 1/4")
Loads up to 140kg (308lbs)
Spinlock 2-6mm PXR Cam Cleat - Swivel Base
PXR0206/SW for single cleat control of jib sheets and dinghy vangs. Preferred by dinghy builders for single line spinnaker hoist systems
Lines: 2mm - 6mm (3/32" - 1/4")
Loads up to 140kg (308lbs)
Spinlock 2-6mm PXR Cam Cleat - Vertical Pivot
The easiest cleat to release under load
Compact roller action cam cleat for easy release of high performance control lines
Pivoting sheave and cleat with ultra compact design
Mount centrally for feeding control lines out to the sides
Mount under boom for outhaul and gnav controls
Mount at mast base for catamaran downhauls and vangs
Easily detached
Accepts Harken sheave ref: H415
Spinlock 8-10mm PXR cam cleat
The easiest cleat to release under load
Compact roller action cam cleat for easy release of high performance control lines
Lines: 8mm - 10mm (5/16" - 3/8")
Loads up to 200kg (440lbs)
Spinlock 8-10mm PXR Cam Cleat - Swivel Base
PXR0810/SW The Easiest Cleat to Release Compact roller action camcleat for easy release of high performance controls and mainsheets Features and Benefits Development of successful PX model Three stage adjustable release spring Alloy cam and base surfaces as standard Ultra compact low profile design Stainless steel rope guides provide wide operating arc Integral 6 degree wedge T-Series for retrofit...
Spinlock Brs/63 Jammer Block
BRS/63 This jammer block is for situations where a fixed foot block cant help: peeling spinnakers- or changing a sheet winch Features and BenefitsSpinnaker block with locking cam- ideal for changing sheet winch- sail changes and locking spinnaker sheets upwind. Cam can be tuned to the exact rope size. Lightweight webbing attachment strop for toe rail or pad eye. Safe Cam Load 240kg (528lbs) Rope Range...
Spinlock Ej/900s Joystick Tiller Extension
EJ/900S Designed for the hardest conditions- to reduce the strain and increase the sheer enjoyment of helming Features and Benefits All the features of the Asymmetric but with a slimmer grip The compact solution for the smaller cockpit and ideal for hiking and fast tacking Push-button adjustment with Torlon ball locking mechanism Strongly engineered stainless steel swivel joint for precise control...
Spinlock RF/H Precision Headsail Luff Feeder
RF/H Sailfeeders for fast- precision- smooth sail hoists Features and Benefits Reduced weight for same strength Electro Polished 17-4PH high grade stainless steel One piece precision investment casting for ultimate strength Mainsail feeder RF/MA locates in the mast track below the luff entry and protects luff tape during the hoist. No drilling is needed Headsail feeder RF/H guides any flaked genoa...
Spinlock RF/MA Precision Mainsail Luff Feeder
RF/MA Sailfeeders for fast- precision- smooth sail hoists Features and BenefitsReduced weight for same strength Electro Polished 17-4PH high grade stainless steel One piece precision investment casting for ultimate strength Mainsail feeder RF/MA locates in the mast track below the luff entry and protects luff tape during the hoist. No drilling is needed Headsail feeder RF/H guides any flaked genoa...
Spinlock Wl/1 Stanchion Furling Line Lead
WL/1 Compact stanchion lead system Features and Benefits Safe- compact design Reduces furling line friction Sheave model WL/2 for line entry and exit stanchions Fairlead model WL/1 straight line guide for intermediate stanchions Unique tracker-ball angle adjuster for perfect sheave alignment Complete with fastenings: easy to fit Use XAS powerclutch or PXR camcleat to secure the furling line Replacement...
Spinlock Wl/2 Stanchion Furling Line Lead
WL/2 Compact Stanchoin Lead System Features and BenefitsSafe- compact design Reduces furling line friction Sheave model WL/2 for line entry and exit stanchions Fairlead model WL/1 straight line guide for intermediate stanchions Unique tracker-ball angle adjuster for perfect sheave alignment Complete with fastenings: easy to fit Use XAS powerclutch or PXR camcleat to secure the furling line Replacement...
Spinlock XAS Clutch, Lines 6-12mm - Double
Multi role clutch with excellent performance across a wide rope range.
Perfect for racing yachts up to to 27’ and cruising yachts up to 35’
Spinlock XAS Clutch, Lines 6-12mm - Single
Multi role clutch with excellent performance across a wide rope range.
Perfect for racing yachts up to to 27’ and cruising yachts up to 35’
Spinlock XAS Clutch, Lines 6-12mm - Triple
Multi role clutch with excellent performance across a wide rope range Perfect for racing yachts up to to 27’ and cruising yachts up to 35’
SUA/1 Single Mini Jammer
SUA/1 For Use With Smaller Winches Features and Benefits Popular halyard Jammer, more power than a cam cleat but much smaller than a powerclutch. Rope Range 6mm - 10mm 1/4" - 3/8" Load 200 - 400 440 - 880 Max SWL 400kg 880lb Weight 0.2kg 0.44lb
SUA/2 Double Mini Jammer
SUA/2 For Use With Smaller Winches Features and Benefits Popular halyard Jammer, more power than a cam cleat but much smaller than a powerclutch. Rope Range 6mm - 10mm 1/4" - 3/8" Load 200 - 400 440 - 880 Max SWL 400kg 880lb Weight 0.2kg lb
SUA/3 Triple Mini Jammer
SUA/3 For Use With Smaller Winches Features and BenefitsPopular halyard Jammer, more power than a cam cleat but much smaller than a powerclutch. Rope Range 6mm - 10mm 1/4" - 3/8" Load 200 - 400 440 - 880 Max SWL 400kg 880lb Weight 0.4kg lb
XAS Clutch Accessories
XAS-HDL Replacement Handle for XAS Clutches XAS-SIDE Replacement side fairings for XAS Clutches XAS-SMNT Side mounting is often the best solution for Spars, Side Decks and Coamings.
XTS Double Clutch
Double Spinlock XTS Rope Clutch 6-10mm & 8-14mm line sizes. XTS Series clutch special application for small diameter lines 6mm to 14mm. The XTS is specified as standard on production yachts worldwide and the choice for racers round the cans and offshore. Spinlock XTS clutches are used on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. XTS...
XTS Single Powerclutch
Single Spinlock XTS Rope Clutch 6-10mm & 8-14mm line sizes. XTS Series clutch special application for small diameter lines 6mm to 14mm. The XTS is specified as standard on production yachts worldwide and the choice for racers round the cans and offshore. Spinlock XTS clutches are used on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. XTS...
XTS Triple Powerclutch
Triple Spinlock XTS Rope Clutch 6-8mm & 8-14mm line sizes. XTS Series clutch special application for small diameter lines 6mm to 14mm. The XTS is specified as standard on production yachts worldwide and the choice for racers round the cans and offshore. Spinlock XTS clutches are used on yachts that require a higher safe working load and a more advanced release mechanism than the XAS. XTS...