In sound recording and reproduction, audio mixing (or “mix down”) is the process which commences after all tracks are recorded and edited as individual parts. The mixing-process can consist of various processes but are not limited to setting levels, setting equalization, using stereo panning, and the addition of effects. The way the song is mixed has as much impact on the way it sounds as each of the individual parts that have been recorded. Dramatic impacts on how the song affects the listeners can be created by minor adjustments in the relationship among the various instruments within the song.
Audio mixing is utilized as part of creating an album or single. Mixing is largely dependent on both the arrangement and the recordings. The mixing stage often follows a multitrack recording. The process is generally carried out by a mixing engineer, though sometimes it is the musical producer, or even the artist, who mixes the recorded material. After mixing, a mastering engineer prepares the final product for reproduction on a CD, for radio, or otherwise.
Audio mixing is the process by which multiple sounds are combined into one or more channels. In the process, the source signals' level, frequency content, dynamics, and panoramic position are manipulated and effects such as reverb may be added. This practical, aesthetic, or otherwise creative treatment is done in order to produce a mix that is more appealing to listeners.
Audio mixing is practiced for music, film, television and live sound. The process is generally carried out by a mixing engineer operating a mixing console or digital audio workstation.
Before the introduction of multitrack recording, all the sounds and effects that were to be part of a recording were mixed together at one time during a live performance. If the mix wasn't satisfactory, or if one musician made a mistake, the selection had to be performed over until the desired balance and performance was obtained. However, with the introduction of multitrack recording, the production phase of a modern recording has radically changed into one that generally involves three stages: recording, overdubbing, and mixdown.
Live sound mixing is the process of electrically or digitally blending together multiple sound sources at a live event using a mixing console. Sounds used include those from instruments, voices, and pre-recorded material. Individual sources may be equalised and routed to effect processors to ultimately be amplified and reproduced via loudspeakers. The live sound engineer balances the various audio sources in a way that best suits the needs of the event.
Audio equipment is usually connected together in a sequence known as the signal chain. In live sound situations, this consists of input transducers like microphones, pickups, and DI boxes. These devices are connected, often via multicore cable, to individual channels of a mixing console that allows these inputs to be modified in various ways before electrically summed. Audio signal processing may be applied to (inserted on) individual inputs, groups of inputs, or the entire output mix, usually using processors that are internal to the mixer or external (outboard).