Can anyone help or point to a thread (if there is one) regarding help for the following: I have a secondhand 12v setup, it came with a 105ah agm battery, a redarc bcdc1220ing charger, a 2000w inverter and all the cabling. I want to have a seperate solar charging setup by having a foldable solar panel that will be outside the car so i can move it wherever the sun is, plugged via anderson plugs to a mppt reg then into a kings battery box. That part is sorted with the anderson plugs. The dcdc charger however has the ringlets to be screwed directly to the battery terminals. Should i still have these go thru a hole in the side of the box onto the terminals of the battery? The battery box has 2 anderson plugs and neg and pos terminals, i wont be needing the andersons for anything else only 1 for the solar, so if i have to change the ringlets to anderson plugs and have that plug into the other anderson plug i will, but id rather not. The inverter will go on the terminals from the battery box so can the dcdc charger and the inverter be on those same terminals? The idea is to only have it charge via dcdc while driving and only solar while camping/the van is stationary for a while. I dont plan to have this setup for long, hence the use of the battery box rather than a more permanant solution. Thanks in advance
The current Philips bulbs lasted less than two years.