I had a little mishap where a hot pan got pushed against the stove wall, which left a nasty burn mark on it. This wall was not done by me, so I am a little unsure what type of material I'm exactly looking at. It feels smooth, but has this textured feel when you drag your nails on it and very slightly rubbery feel and is very easy to clean.

The whole wall has this flower theme going on, so I'm hoping this could be a specific type of paint? My worst fear is that it came as a set/panel and was just installed.

Essentially, I'm looking for an effective way of seamlessly patching this area.

Thanks!

https://preview.redd.it/07feoe27j2ra1.jpg?width=768&format=pjpg&auto=webp&v=enabled&s=5923ff3f5c9034a38d5a9eac39542e6ef22e22ef

https://preview.redd.it/6u15ydiu03ra1.jpg?width=768&format=pjpg&auto=webp&v=enabled&s=9ea3fda502b6359ec4e480b406390165a72b4614

10

11 comments

73

Posted by16 hours ago

home improvement

Primed my walls today. Happy with the progress so far. Drywall took forever but really happy with how it looks!

imgur.com/a/S3mK...

73

9 comments

447

Posted by1 day ago

other

Frigidaire Dishwasher Dead?

Hello!

A few days ago my dishwasher was having trouble, when attempting to operate on a normal wash it would:

Drain the basin
Refill the water
Warm the water

Then stop. Looking around, it sounds like it could have been a temperature issue or a door latch issue. After attempting to engage the door lock the machine seems to do nothing at all now. When I power down the unit and turn it back on the START light flashes 14 times and then all lights go out and nothing responds. Are my electronics fried or can it be saved? Thanks!

https://preview.redd.it/bolnmrwlyvqa1.png?width=345&format=png&auto=webp&v=enabled&s=6f5f0254db38a6e10f965292ba04c11b26942350

Edit: thanks all, was able to get power back to the panel by taking off the front and pushing the door latch forward to disengage the lock. Now the unit still stops before the rinse cycle so it looks like I'll need to replace the latch. $45 online, better than a $600 new unit!