Project:Sandbox
Joints[edit]
Joints[edit]
A joint can seal for 2000+ years.
The list of joints and installation instruction can be found in the following direction
Joint 1[edit]
DEFECTS:[edit]
PULL TESTS:[edit]
PULL TEST ON ALL SIZES IN JOINT 1 CAN BE FOUN IN THE FOLLOWING LINK
GENERAL:[edit]
Joint components[edit]
nut, body, gasket, stiffener, retainer
How to design:[edit]
Joint 2[edit]
General[edit]
Pull Tests[edit]
Defects[edit]
How to design[edit]
Joint5[edit]
General[edit]
![Joint assambled.jpg](http://web.archive.org./web/20220525192922im_/https://upload.wikimedia.org/wikipedia/commons/thumb/a/ab/Joint_assambled.jpg/220px-Joint_assambled.jpg)
Service Head Adapter.
Components used are Nut, Body, gasket, retainer,
Pull Tests[edit]
Defects[edit]
How to design[edit]
Joint 22[edit]
GENERAL:[edit]
Self Locking Bead tipped joint also known as SLBT Joint. It uses the following components. Self-Lockin Nut
DEFECTS history and decisions:[edit]
PULL TESTS:[edit]
PULL TEST ON ALL SIZES IN JOINT 22 CAN BE FOUN IN THE FOLLOWING LINK
How to design:[edit]
PROCESS[edit]
Lab Reports:[edit]
How to fill out:[edit]
what is stored:[edit]
types of lab tests:[edit]
lab report procedures[edit]
Blueprints:[edit]
How to find drawings:[edit]
what to do with a new drawing:[edit]
how to distribute:[edit]
how to get a new part number:[edit]
how to get a new drawing number:[edit]
you will out the index card and pick the next drawing number available and update this information on Qantel