Headstock

A headstock or peghead is part of a guitar or similar stringed instrument such as a lute, mandolin, banjo, ukulele and others of the lute lineage. The main function of a headstock is to house the pegs or mechanism that holds the strings at the "head" of the instrument. At the "tail" of the instrument the strings are usually held by a tailpiece or bridge. Machine heads on the headstock are commonly used to tune the instrument by adjusting the tension of strings and, consequentially, the pitch of sound they produce.

Construction details

Two traditional layouts of tuners are called "3+3" (3 top tuners and 3 bottom ones) and "6 in line" tuners, though many other combinations are known, especially for bass guitars and non-6-string guitars. When there are no machine heads (i.e. tuners are not needed or located in some other place, for example, on guitar body), the guitar headstock may be missing completely, as in Steinberger guitar or some Chapman stick models.

The headstock may be carved separately and glued to neck using some sort of joint (such as a scarf joint). There are two major trends in headstock construction, based on how the string will go after passing the nut. The advantages and disadvantages of both trends are very debatable and subjective, so these two variants are used:

Headframe

A headframe (also known as a gallows frame,winding tower,hoist frame,pit frame,shafthead frame,headgear,headstock or poppethead) is the structural frame above an underground mine shaft.

Design

Modern headframes are built out of steel, concrete or a combination of both. Timber headframes are no longer used in industrialized countries, but are still used in developing nations. Conventionally steel headframes are used when a drum hoist is employed, and concrete headframes are built for friction hoists; however a steel headframe can be used with a friction hoist for shafts with a smaller capacity and depth.

Steel headframes

A steel headframe is less expensive than a concrete headframe, providing the height (defined as the vertical distance from the collar elevation to the center-line of the highest head sheave) does not exceed 50 m. Steel headframes are more adaptable to modifications (making any construction errors easier to remedy), and are considerably lighter, requiring less substantial foundations. As steel headframes are easier to design, they have the potential to utilize "off the shelf" design tools. Construction of a steel headframe can be easily interrupted and restarted if necessary for statutory holidays or bad weather, where slip forming concrete is not. Upon mine closure and mine reclamation a steel headframe is easier to demolish and may have value as scrap metal.

Headstock (disambiguation)

Headstock is a part of guitar or similar stringed instrument.

Headstock may also refer to:

See also