A double hinge provides high cutting force with low gripping pressure. These cutters are also known as aviation snips.

Keep your hand away from the material being cut.

Prevent waste from flying up as you work. A double blade makes two cuts, creating a 7/64" wide strip that peels back leaving little distortion and smooth edges.

This cutter has two blades that cut a 13/64" wide strip—peel it back for smooth edges with little distortion.

These cutters make straight cuts and curves.

Replace blades as they wear. These cutters are also known as tinners' snips.

Also known as bulldog snips, these have long handles and short blades for cutting heavy material in any direction.

Made from aluminum bronze, the blade and handle on these cutters inhibit sparking and are FM approved. Use them for straight cuts.

Make cuts in metal up to 1/32" thick with these compact cutters.

Blades are heat treated then sharpened for increased performance and durability.

Also known as bulldog snips, these have long handles and short blades for cutting heavy material in any direction.

Make round, square, and irregular-shaped holes with this punch-style hole cutter.

Cut up to 1" deep V-shaped notches in sheet metal.

Turn your portable drill into a punch cutter for cutting curved and straight shapes in flat and corrugated sheet metal and plastic.

Make accurate cuts at precise angles. These cutters have a miter guide that is notched to line up your workpiece.

Good for high-volume cutting and trimming.

Also known as diagonal-cutting pliers.

Leverage points in both the jaws and the handle give you more power with less effort.

These cutters are stainless steel, which provides excellent corrosion resistance.

The black finish prevents glare that can interfere with precision work under bright light and magnification.

The grips are a fluorescent color to stand out.

The grips on these cutters drain static from your application, preventing buildup from electrostatic discharge (ESD).

These sets include four cutters, each with a different head shape.

The specially designed internal spring provides constant, uniform tension for superior performance.

These tools divert static electricity faster than our other static-control wire cutters.

These cutters are stainless steel, which provides excellent corrosion resistance.

Tungsten carbide cutting edges are bonded to the jaws for long life.

These cutters have insulated grips to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Good for high-volume cutting and trimming.

Plastic-cushioned grips make these cutters easy to hold during repeated cuts.

Cut hard steel wire, nails, and small rivets close to the surface with the wide, flat jaws on these cutters.

Sharpen or replace the jaws as they wear. These cutters have a double hinge that provides high cutting force with low gripping pressure.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

A double hinge provides high cutting force with low gripping pressure.

Also known as nippers, these cutters have wide, flat jaws that cut steel wire and bolts close to the surface.

Precisely position and flush-cut copper, gold, silver, and magnetic wire.

Made of beryllium copper that is FM approved, these cutters satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

These powerful cutters make diagonal cuts with a nipping action to cut extra-hard wire with ease.

Cut thin, hard wire with these small cutters.

A small grip enables one-handed cutting.

Cutters have double hinge that provides high cutting force with low gripping pressure.

Keep your hands in a comfortable position so you can apply more force for cutting.

Minimize material distortion while cutting steel and stainless steel wire rope.

Insulated handles protect against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Use the lever to make one-handed cuts with minimal material distortion. Cutter mounts to a workbench for extra stability and ease of use for repeated cuts.

The small size and spring-loaded jaw lets you make quick cuts with one hand.

Handle is angled 30° to keep work in sight and hands clear of the work surface. Blades are flat on one side for close-to-the-surface cuts.

Use these one-handed cutters on small-diamter aluminum and copper power and communication cable.

Cut armored cable such as BX, HCF, and MC and flexible metal conduit.

Produce clean, distortion-free cuts in cable with one-handed operation.

Push the button to cut aluminum and copper power and communication cable.

These small scissors have narrow, sharp tips for fine cutting and trimming

Trim flush against a flat surface with the curved blades on these small scissors.

Longer handles and shorter blades give you more leverage than other scissors to cut tough materials such as leather, rope, and thick cardboard.

After each cut, the jaws spring open to make continuous cutting easy.

For extra leverage to cut through Kevlar, metal, and plastics, these scissors have long handles and short blades.

Also known as electricians' shears, the back edge of the blade has a file to clean contacts.

Cut and strip wire in tight spaces with the compact tips on these scissors.

Insulated handles protect against shock from accidental contact with live electrical circuits. These scissors are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

Extra-long handles enable access to hard-to-reach areas. Also known as lineman’s and combination pliers, use these tools to pull, bend, and cut wire.

When there isn't clearance to use standard-grip pliers, the angled head on these tools gives you access. Also known as lineman’s and combination pliers, use them to pull, bend, and cut wire.

Additional features, such as wire terminal crimpers, enable you to perform a variety of electrical wiring and installation work with a single tool. Also known as lineman’s pliers, use them to pull, bend, and cut wire.

Deep serrations provide the firm grip necessary for pulling rebar tie wire, and the hook-shaped handle end keeps your hand from slipping off. Also known ironworkers’ pliers, these tools also bend and cut wire.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use them to pull, bend, and cut wire.

Avoid the potential for an arc flash or short circuit that can occur when using conventional insulated tools with metal components. Completely metal-free, these pliers are plastic with ceramic cutting blades. They are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. Use to pull, bend, and cut wire.

Choose a stainless steel tool for environments where moisture and other contaminants are present. These pliers resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool. Use them to pull, bend, and cut wire.

Made of aluminum-bronze that is FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Use them to pull, bend, and cut wire.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height. Use these tools to pull, bend, and cut wire.

Long jaws reach workpieces in recessed areas. These pliers lock in a vise-like grip around a workpiece and stay clamped in place to leave your hands free.

Lock the jaws in a vise-like grip around a workpiece and these pliers stay clamped in place to leave your hands free.

Squeeze the handles and the jaws automatically adjust to fit a workpiece and lock in place.

Curved jaws grip bolt heads and nuts with rounded corners. These pliers lock in a vise-like grip and stay clamped in place, leaving your hands free.

Grip, bend, and twist wire and other small workpieces. Also known as needle-nose and chain-nose pliers, these tools have long, tapered jaws.

Additional features, such as wire terminal crimpers and wire stripping holes, enable you to perform a variety of electrical wiring and installation work with a single tool.

With thinner tips than standard long-nose pliers, these tools fit into tight spaces.

Tips almost twice as wide as those of standard long-nose pliers give you a better grip on your work. These are also known as duckbill and flat-nose pliers.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Made of materials that are FM approved, these pliers satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Colorful plastic grips make these tools stand out, so they're less likely to be misplaced.

Secure a lanyard to the ring on the handle to prevent dropping your pliers when working at height.

Made of stainless steel, these pliers are good for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

Colorful plastic grips make these assorted pliers stand out, so they’re less likely to be misplaced.

Sets contain an assortment of pliers styles. These tools are steel.

Choose these stainless steel pliers for environments where moisture and other contaminants are present. They resist corrosion that can hinder joint movement, but the jaws will wear more quickly than a steel tool.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Insulated grips protect against accidental contact with live electrical circuits. These assorted pliers are tested to 1,000 volts to meet IEC 60900 and ASTM F1505.

Lock the jaws in a vise-like grip around a workpiece and these assorted pliers stay clamped in place to leave your hands free.

Smooth, consistent movement ensures precision. These assorted pliers have slip-resistant ultra grips that are shaped to fit comfortably in your hand and reduce strain in repetitive tasks. They are also known as miniature and electronics pliers.

Vertical and horizontal serrations and a tip shaped to firmly grip the outside of screw heads remove stripped, rusty, and tamper-resistant screws.

The jaws remain parallel as they move to keep irregularly shaped objects from slipping forward when pressure is applied.

Reach around closely spaced components and other obstructions.

Insulated grips protect against accidental contact with live electrical circuits. These pliers are tested to 1,000 volts to meet IEC 60900. They are shaped to reach around closely spaced components and other obstructions.

Adjust the pivot point to switch between two different jaw opening sizes.

The narrow jaws fit into tight spaces, and the slip joint allows you to switch between two different jaw opening sizes.

The grips drain static from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment.

Colorful plastic grips make these pliers stand out, so they're less likely to be misplaced.