Combine posts, panels, and doors to create a barrier around equipment.

Framed in aluminum T-slotted extrusions, these customizable machine guards provide multiple points of attachment for other components and structures.

Combine rails, posts, and gates to make a custom guardrail system.

These guardrails sit low to the ground to protect racks and equipment without restricting access.

These bollards flex slightly when bumped by a vehicle to prevent dents and dings.

Mount near a machine to deflect debris away from the immediate area. Guards bend and twist in any direction.

Protect personnel and equipment from debris with these portable panels.

Modular mix-and-match components allow flexible railing configurations.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

No assembly required with these one-piece railings.

These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Pivots provide smooth motion at the junction between two T-slotted rails.

Get projects off to a quick start with these kits that include the components you need to build simple structures, such as workbenches and stands.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Illuminate workstations, enclosures, and machines.

Bumpers cushion doors and other moving parts to prevent damage and reduce noise.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Add rollers to T-slotted framing to create flow rails, ball transfer tables, and other manual conveyors.

This welded, one-piece strut channel combines two strut channels back-to-back.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Slide the strut channel into the tube for telescoping length adjustments.

With welded ends, these short lengths of strut channel provide a finished look when mounting clamps and accessories to machines and surfaces.

Brackets mount on the outside of strut channel to allow trolley movement.

Provide a stable, nonmarring base for strut channel legs.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Keep a rod securely centered against the strut channel.

When there's no access to the open side of a strut channel, slip one of these nuts through a slotted hole and turn it 90° to secure it in the channel.

Push these nuts into place rather than threading them onto a fastener.

Keep hardware centered in the strut channel slot.

Notches on these washers grip the channel to keep them in place.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

Provide smooth motion between two pieces of strut channel.

Support the corners of strut channel structures.

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

Close off openings in structures while allowing air to pass through.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Create secure but visible tool and stock rooms.

Block chips while maintaining an unobstructed view of the workpiece.

Increase safety and visibility. This clear plastic guard attaches to the guide bar on your saw and has a built-in light.

Shield couplings and bearings from dirt and debris while protecting fingers and tools from moving parts.

Often used with machine guards, these switches mount to a door frame.

Replace access door hinges with these switches; they actuate when the door opens at least 4°.

Transmit a beam of light up to 225 ft. from the transmitter to the receiver.

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Route pipe, tubing, and conduit across strut channel.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

Cover standard or flange-mount bearings to protect personnel from injury and keep contaminants out.