×
sorted by:
new
hottopcontroversial

Alleged Mongrol Mub prospect unprovoked assault to gain patch by planespotterhvn in chch

[–]chopsuwe 0 points1 point  (0 children)

Can you provide a link that there was a death penalty for speaking Te Reo?

Corporal punishment means beating, not killing. Yeesh, schools weren't that bad!

Guilt has nothing to do with it. if we want to move on as a country and break the chain of resentment, disillusionment and generational poverty we need to address both the current problems and the cause.

Alleged Mongrol Mub prospect unprovoked assault to gain patch by planespotterhvn in chch

[–]chopsuwe 1 point2 points  (0 children)

Aren't we all fucking over it?

Probably not for those in the over 50 year old age bracket who had to live through the societal and government mandated racial discrimination, the land confiscation that continued in on for or another right up to the 1970s, corporal punishment for speaking their own language, etc. Even as recently as the late 1990s learning Maori in school was very much looked down on by the general population.

How would you feel about being told you were stupid for being Maori for the first 20 years of your life? It's not hard to see how you'd end up being bitter and twisted then going on to raise your kids that way too.

That's not to say there's no personal responsibility involved, because there absolutely is. It's just that saying "their ancestors" is really brushing it off when in reality it was them and their parents who went through it.

Andreas Spiess compares the RPi Pico to other microcontrollers. by Gerald_Rinder in arduino

[–]chopsuwe 0 points1 point  (0 children)

You might be right. It looks very much like this one. https://www.ajudaica.com/Pink-Torah-Pointer-By-Agayof/item12836

Also, TIL there are pointers for reading the Torah.

How deep do my fence posts need to be? by iFuckss in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

    • Please include what research you have done in your question so that others do not repeat your steps.
    • Consider posting your question in the sticky thread at the top of the subreddit.
    • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Please help: persistent snapping sounds in neck by Xenonamous in medical

[–]chopsuwe 1 point2 points  (0 children)

Probably muscle tension in your back, arms or legs. Give yourself a massage, work out the tight spots and see if it goes away.

Just ate some english muffins and thought my girlfriend had put lemon juice on them. Turns out they were expired for two weeks. No visible mold but STRONG lemon taste. We gonna be OK? by [deleted] in medical

[–]chopsuwe 0 points1 point  (0 children)

Yeah, you're going to die

... at some point. Probably not today, but you will eventually

Wow. Truly endgame worthy. by H838N in MouseReview

[–]chopsuwe 4 points5 points  (0 children)

It's amazing how many people here don't realise this is nothing more than a paid advert.

Wow. Truly endgame worthy. by H838N in MouseReview

[–]chopsuwe 2 points3 points  (0 children)

It's almost like they are being paid to advertise products and for the adverts on the page rather than producing genuine unbiased reviews. Who would have thought?

Wow. Truly endgame worthy. by H838N in MouseReview

[–]chopsuwe 2 points3 points  (0 children)

No, this sub is not exclusive to gamers.

Why do we not have the ability to restrict posts from NSFW accounts by RallyX26 in ModSupport

[–]chopsuwe 0 points1 point  (0 children)

I reported an account for spamming porn links in a non NSFW sub. Reddit's answer was that it doesn't violate their content policy.

After 7 years, Arduino IDE will return to the Debian repositories by Crapcircles in arduino

[–]chopsuwe -2 points-1 points  (0 children)

Ah right, so it's just that particular way of installing that was broken.

I've never really understood the point of the repository. Either way I'm going to have to search for the software so might as well use Google which does a better does a better job at correcting a badly spelled/remembered name as well as suggesting alternative programs when I don't know which one to use.

After 7 years, Arduino IDE will return to the Debian repositories by Crapcircles in arduino

[–]chopsuwe -4 points-3 points  (0 children)

Windows didn't have to wait 7 years for it to work. I'd call that better support.

what fire resistant bricks would I need for building a forge? by FOXlegend007 in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

    • Please include what research you have done in your question so that others do not repeat your steps.
    • Consider posting your question in the sticky thread at the top of the subreddit.
    • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Can I remove this without my house exploding? by cedarbread in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
    • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

To help small businesses compete with Jeff Bezos, I built a free shopping assistant that suggests products from local stores in your city when you're shopping on Amazon, Nordstrom, Zara and other corporate retailers. Works in 30+ cities with more coming! by [deleted] in DIY

[–]chopsuwe 0 points1 point  (0 children)

Mod here, make sure to use the report button so we can find and ban these spammers before they get upvote karma.

Rotten old fence becomes new bike shed by spencersoper in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your descriptions on your photos are inadequate.
    • Descriptions must detail important aspects of your project (method used, tips, problems encountered, measurements, materials, tools, etc).
    • Imagine you are teaching a classroom of students with zero experience and they will recreate your project based solely off your description of how to complete it.
    • If we are unable to determine how you got from one photo to the next based on your descriptions - they will not be accepted.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Oil Related Questions by xCiaran in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

    • Please include what research you have done in your question so that others do not repeat your steps.
    • Consider posting your question in the sticky thread at the top of the subreddit.
    • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

DIY remodel of our downstairs half bath. by Bourbon_and_Boltz in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your descriptions on your photos are inadequate.
    • Descriptions must detail important aspects of your project (method used, tips, problems encountered, measurements, materials, tools, etc).
    • Imagine you are teaching a classroom of students with zero experience and they will recreate your project based solely off your description of how to complete it.
    • If we are unable to determine how you got from one photo to the next based on your descriptions - they will not be accepted.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Polycarbonate skylight flooring? by happysign0 in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
    • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Can't we all DIY dining tables by screwing legs onto a slab of wood? by thailandishtea in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

    • Please include what research you have done in your question so that others do not repeat your steps.
    • Consider posting your question in the sticky thread at the top of the subreddit.
    • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Mortar removal by [deleted] in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • Your question does not include the research you've done to find an answer yourself, or why that research didn't answer your question.

This is a basic requirement so others do not spend time repeating your steps. It is not a judgement about your question being "too easy." We're looking for evidence that you've made an attempt yourself.

  • Please do not use /r/DIY as your first stop for questions - we are not Google.

  • Please search Google and /r/DIY to see if your question has been asked before. Check owners manuals, tech support forums or contact the manufacturer.

  • Have you already done some basic research and are still stuck?

    • Please include what research you have done in your question so that others do not repeat your steps.
    • Consider posting your question in the sticky thread at the top of the subreddit.
    • Ask your question in our Discord server in the appropriate channel.

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Mounting to horizontal pipes. by charliev77 in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
    • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

Irony? Indicator Light Needed for Lighting Dimmer by I_Have_A_Pregunta in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
    • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

DIY work desk combining e-piano space by elnino_1993 in DIY

[–]chopsuwe[M] 0 points1 point  (0 children)

Your submission has been removed for one or more of the following reason(s):

  • You are asking how to "get started" on a project.
  • You are asking what is the best method or approach to a project.
  • You are asking whether or not you should do a project.
  • You are asking for advice on what project you should make ("what can I make within my budget?")
    • If you have a project in mind, please do some basic research on the matter, come up with your plan, then you can ask about a specific aspect of the project.

We want you to get the help you're looking for. If you have any of these questions, some places to get help are:

Please read our guidelines before resubmitting.

If you believe this was a mistake, please message the moderators.

Do not respond to this comment - you will not receive a response.

After 7 years, Arduino IDE will return to the Debian repositories by Crapcircles in arduino

[–]chopsuwe -27 points-26 points  (0 children)

See, this is why I refuse to switch to Linux. For all it's failings, at least Windows works and has mainstream support.

view more: next ›