BVRLA Fair Wear & Tear Guide Incorporating the BVRLA Fair Wear & Tear Standard Licensed to Central Contracts
BVRLA Fair Wear & Tear Guide: Cars
Contents The aim of this guide
The BVRLA Fair Wear & Tear Standard
What does the BVRLA Fair Wear & Tear Guide contain? 4
General appearance and road safety
11
Advice for drivers during the term of the vehicle lease
Maintenance, servicing and repairs
11
Personal number plates
Appraisal tips for drivers before returning a lease vehicle
2
3
5
5
6
Advice for drivers on the day the vehicle is returned
7
End of lease charges
8
What drivers should expect at vehicle return Why do we have end of lease charges? What BVRLA members must do BVRLA Code of Conduct
8 9 9 10
In case of a dispute 10 BVRLA dispute resolution process 10 About the BVRLA
21
Documentation 12 Appearance 12 Keys 12 Paintwork, vehicle body, bumpers and trim 13
Chips, Dents, Scratches Unpainted mouldings, wheel trims Badges, emblems and labels Soft and hard top convertibles Tow bars Windows, glass, door mirrors and lamps
13 14 14 14 14
11
Tyres and wheels
17
Tyre wear and damage Wheels and wheel trims
17 17
Mechanical condition
18
Vehicle underside
18
Vehicle interior
19
Passenger area, seats, headrests and trim Door aperture, boot, boot liner and luggage area
19 19
Equipment and controls
19
In-car entertainment equipment, telephones and navigation systems Driver safety equipment
19 19
Glossary 20 15
Panoramic roofs 15 Windows/windscreens 15 Door mirrors 15 Lamps and lenses 15
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
Š COPYRIGHT 2019
NEXT
BVRLA Fair Wear & Tear Guide: Cars
The aim of this guide The aim of the BVRLA Fair Wear & Tear Guide is, firstly, to provide information to drivers about looking after a leased vehicle so that end of lease charges can be avoided and, secondly, to provide an industry-wide, accepted standard that defines fair wear and tear on passenger cars when they are returned at the end of a lease contract or finance agreement. This guide covers all passenger vehicles, including multiple passenger vehicles with up to eight seats. Separate Fair Wear & Tear Guides are available for vans and minibuses, and trucks.
3
Fair wear and tear occurs when normal usage causes acceptable deterioration to a vehicle. When BVRLA members review deterioration in the vehicle’s condition at the end of a contract or finance agreement, they consider the age, mileage and whether the vehicle has been looked after sufficiently.
This Fair Wear & Tear Guide is produced by the British Vehicle Rental & Leasing Association (BVRLA) with the assistance of a specialist working group drawn from BVRLA members and independent market experts.
Fair wear and tear should not be confused with damage, which occurs as a result of a specific event or series of events, such as an impact, inappropriate stowing of items, harsh treatment, negligent acts or omissions.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
What does the BVRLA Fair Wear & Tear Guide contain?
BVRLA Fair Wear & Tear Guide: Cars
What does the BVRLA Fair Wear & Tear Guide contain? It contains advice and guidance that drivers can use throughout the period of the vehicle contract. For example, tips on looking after the vehicle, information drivers should know at the start of the lease, tips on appraising the vehicle’s condition at the end of the lease, and what to expect on the day the vehicle is returned. It also shows how to complain if things go wrong. The guide also contains the BVRLA Fair Wear & Tear Standard, which defines the industry standard at return for every aspect of the vehicle’s condition. For ease of reference, the condition of the vehicle is considered under the following headings:
4
› General appearance, road safety, documentation and keys
› Paintwork, vehicle body, bumpers and trim
› Windows, glass, door mirrors and lights
› Tyres and wheels › Mechanical condition › Vehicle interior › Equipment and controls
The person named on the contract (referred to herein as the ‘driver’) should be clear at the outset of the lease or finance agreement about their obligations to ensure that the vehicle is appropriately looked after and returned in the required condition.
PREVIOUS
Those personally leasing the vehicle and responsible for its maintenance and upkeep should consult the leasing company or service provider for advice and ensure that the advice is followed.
If a company car, the employer may outline preventative vehicle maintenance and road safety measures that need to be undertaken on a daily or weekly basis.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
CONTENTS
NEXT
Advice for drivers during the term of the vehicle lease
BVRLA Fair Wear & Tear Guide: Cars
Advice for drivers during the term of the vehicle lease Advice about looking after the leased vehicle can be obtained from a number of sources, including the vehicle’s handbook. The leasing provider will take care of routine servicing and maintenance if the vehicle is on a maintenance-inclusive contract or a fleet-managed arrangement. Leasing providers may provide advice and guidance to help customers look after their vehicle if asked to do so.
The lease provider should:
The driver should:
› at the start of the contract,
› use, maintain and look after the
supply information on the return standards required by the leasing company.
5
vehicle in accordance with the vehicle manufacturer’s guidelines;
› follow the advice provided to keep the vehicle in good condition, help maintain its performance, and preserve its safety features and emissions standards. Looking after the vehicle appropriately will minimise any potential charges at the end of contract;
› follow the manufacturer’s
recommendations regarding fuel and fuel blends, additives such as Adblue, lubricants and battery recharging (if an electric or hybrid vehicle), because the vehicle’s warranty may be invalidated, and long-term damage caused, through inappropriate use of fuels, additives, lubricants and battery usage;
› report any suspected manufacturer’s faults identified on any part of the vehicle, its bodywork or trim, to the leasing company as soon as possible to get the issue resolved;
› be aware that adjusting the vehicle’s odometer (‘mileage clock’) before return is not permitted.
Personal number plates Drivers should liaise with the leasing company 10 to 12 weeks before the end of lease to ensure that any personal number plate is transferred from the lease vehicle to a new one.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
Appraisal tips for drivers before returning a lease vehicle
BVRLA Fair Wear & Tear Guide: Cars
Appraisal tips for drivers before returning a lease vehicle › Carry out an appraisal of the vehicle
10 to 12 weeks before the vehicle is due for return. This will allow you to arrange to have any damage rectified and missing items replaced.
› Before appraising the vehicle, make
sure that it has been washed and is thoroughly clean, but remember to allow time for it to dry. Water on the paintwork can mask faults.
6
› Choose a time and place with
good light. This is how the leasing company will examine your vehicle. Appraisals carried out in poor light invariably miss some faults.
› Check the terms of your contract for
information on the return standard required and consult with your leasing company or finance house if you are in any doubt.
› Walk all the way around the vehicle
and examine closely each panel, including the roof, bonnet, doors and body, for significant damage. Observe where the light is reflected differently from any dents and scratches.
› Crouch or kneel down at the front and rear of the vehicle and look along each side. This will help you see scratches and dents that may otherwise be difficult to spot.
› Inspect lamps, lenses, windows and mirrors for chips, cracks and holes.
› Check the tyres (including spare) for
damage. Check that the wear on the tread across each tyre is even.
› Inspect wheels, wheel rims and wheel hubs, and spokes, for scratches, rust and corrosion.
› Clean and valet the interior.
› Check upholstered areas for odours, tears, burns, stains and wear.
› Inspect all controls, including audio
equipment and accessories – they should be present and fully functional.
› It is important to appraise the vehicle
as honestly as you can – be objective. Ask a friend or colleague to help you.
PREVIOUS
› Check your vehicle against the
BVRLA Fair Wear & Tear Standard.
› Arrange to repair areas of damage
and replace missing equipment and accessories before the vehicle is returned, ensuring that any work carried out is done to a professional standard by a repairer who can provide a transferable warranty for the work.
Of course, you may decide you want to keep the vehicle because you know its history. Contact your leasing company – it may offer this vehicle, or others like it, at very attractive prices.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
CONTENTS
NEXT
Advice for drivers on the day the vehicle is returned
BVRLA Fair Wear & Tear Guide: Cars
Advice for drivers on the day the vehicle is returned › On the day the vehicle is returned, it must be in a safe and roadworthy condition with all keys, equipment, accessories and documentation present.
› The leasing company will arrange
7
collection of the vehicle at the end of contract. All readily apparent damage and wear, including that deemed normal wear and tear, will be documented when the vehicle is collected. The driver will be given the opportunity to agree with the condition of the vehicle at the point of collection. The leasing company will then be able to carry out a final assessment of the vehicle to calculate what end of lease charges, if any, are payable.
› Point out any unrepaired wear or damage to avoid problems later.
› If you cannot be present during
the collection of the vehicle, or if other conditions, eg poor weather, prevent the vehicle from being inspected, the leasing company will issue a written condition report of the vehicle and advise of any charges that may subsequently become due, together with summary details of those charges, including repair method/type, along with photographic evidence.
› Ensure all personal belongings
are removed from the vehicle, eg sunglasses, SD cards, music CDs from the player/multi-stacker. Don’t forget to remove any item, including paperwork and other correspondence, that could reveal personal data about you, your family or friends.
› Remove personal keys from the
vehicle’s key fob. Delete any personal information from the vehicle’s on-board systems using the ‘factory re-set’ facility. Ask the leasing company for advice if you experience any difficulties.
› Discs for satellite navigation
should be left in the vehicle.
PREVIOUS
› The vehicle’s number plate should be intact and the characters making up the registration mark must be of the specified size and font set out in Road Vehicles (Display of Registration Marks) Regulations 2001, as updated from time to time.
CONTENTS
NEXT
End of lease charges
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
BVRLA Fair Wear & Tear Guide: Cars
End of lease charges What drivers should expect at vehicle return Drivers must be advised what to expect when the vehicle is collected. Some leasing companies arrange a full vehicle inspection and condition report upon collection. Other leasing companies will collect the vehicle, make a note of its condition by recording all readily apparent damage and missing equipment and complete the final inspection later at the leasing company’s nominated site. Drivers can expect to be treated fairly.
8
It is recommended that the driver (or a nominated representative) is present when the vehicle is collected. If the vehicle is not sufficiently clean to allow a detailed inspection, the collection process may need to be aborted and a charge may be applied. Drivers will be asked to agree to postpone the inspection and to sign the condition report to that effect.
If the BVRLA member intends to apply any charges, for example for excess mileage, damage or missing equipment, the driver must be advised of those charges no later than four weeks after the vehicle was collected or returned. If charges are being applied, the BVRLA member should provide a summary breakdown of the charges, including the repair method/type of repair. Drivers should also be provided with photographic/video or other documentary evidence to help justify or support the charges made. Drivers should also be advised of their right to query any end of lease charges.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
End of lease charges (continued)
BVRLA Fair Wear & Tear Guide: Cars
End of lease charges (continued)
9
Why do we have end of lease charges?
What BVRLA members must do
End of lease charges are applied when the vehicle, its equipment and accessories are not used, maintained or looked after as originally agreed at the start of the lease. These charges compensate the leasing company for the cost of rectifying damage and replacing missing items, such as keys, parcel shelves, etc.
On entering the lease agreement, BVRLA members must clearly explain:
Drivers can expect to incur end of lease charges if there is no evidence that the vehicle has been serviced and maintained according to the vehicle manufacturer’s guidelines.
Charges can still be applied at end of lease in cases where the leasing company decides for commercial reasons not to repair damage or to replace missing equipment before the vehicle is sold. Drivers are not charged at end of lease for any refurbishment that arises from normal wear and tear. Drivers can arrange to repair any damage that is outside the agreed return standard before returning the vehicle, provided the repairs are carried out to a professional standard by a reputable repairer who can provide a full transferable warranty on their work.
› their end of lease vehicle return standard;
› the required condition of the vehicle; › the presence and condition of any
PREVIOUS
vehicle keys and accessories;
› how they require you to look
after the vehicle (eg servicing and maintenance) during the term of the contract.
CONTENTS
NEXT
BVRLA Code of Conduct
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
BVRLA Fair Wear & Tear Guide: Cars
BVRLA Code of Conduct BVRLA members are obliged under the BVRLA Code of Conduct to trade fairly and responsibly in all dealings with their customers. The BVRLA promotes ethical trading, clear pricing, transparent terms and conditions and the provision of high-quality vehicles and customer service. The Code of Conduct sets out the standards that BVRLA members must comply with regarding pre- and post-contract procedures, level of customer support during the contract period, and how customer complaints should be handled.
In case of a dispute
10
In the event of a dispute about the condition or damage to the vehicle, drivers have the right to pay for a review of any documents and photographic evidence by an independent qualified engineer, eg an engineer who is unrelated to the original inspection and agreed by both parties. The engineer’s decision will be binding on both the driver and the BVRLA member. If the engineer finds in the driver’s favour, the BVRLA member will refund the reasonable cost of the examination.
BVRLA dispute resolution process
The BVRLA is approved by Government as a Consumer ADR body under the Alternative Dispute Resolution for Consumer Disputes (Competent Authorities and Information) Regulations 2015. Those who are unhappy with the service received by a leasing company should in the first instance inform the company of the issue to give them a chance to resolve the matter. Contact them in writing, explaining the issue and how you would like them to put things right. If an issue remains unresolved and the final response from the leasing company is deemed unsatisfactory, you can escalate a complaint to the BVRLA Alternative Dispute Resolution (ADR) service as long as the leasing company is a BVRLA member. Customers of BVRLA members have access to the ADR at no cost. The ADR is a restorative justice service, not a compensatory scheme. Complaints can be submitted via the BVRLA’s website.
Alternatively, a complaint can be submitted by post to: Dispute Resolution Team British Vehicle Rental & Leasing Association River Lodge Badminton Court Amersham HP7 0DD The BVRLA dispute resolution team will find out the facts of what’s happened. BVRLA members are expected to respond to our request for information within five working days, in keeping with our Code of Conduct. The case is reviewed without bias, based on the evidence supplied by both parties. A decision and explanation of findings and recommendations are supplied in writing. The BVRLA aims to resolve all complaints within 30 days of receipt. BVRLA members are obliged under the BVRLA Code of Conduct to comply with the Alternative Dispute Resolution service’s findings. The full ADR procedures are available on the BVRLA website.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
The BVRLA Fair Wear & Tear Standard
The BVRLA Fair Wear & Tear Standard General appearance and road safety
Maintenance, servicing and repairs
All electronic safety features and advanced driver assistance systems that help the driver, eg parking sensors, cruise controls, lane departure and collision warnings, must be in working order.
The vehicle must have been serviced and looked after according to the manufacturer’s servicing/maintenance schedule.
There should be no rust or corrosion on any part of the bodywork, trim of the vehicle, or on the alloy wheels.
11
The vehicle must be roadworthy, and no warning lights should be illuminated. There should be sufficient fuel (or residual charge in the battery, if an electric vehicle) to bring about the vehicle collection or return.
The service book, if originally supplied with the vehicle, must be present and date-stamped by the repairer or workshop as evidence that the services have taken place. If the service record is kept electronically, the driver must produce evidence that the vehicle has been serviced and maintained according to the vehicle manufacturer’s service and maintenance schedule. Appropriate evidence would include hard copies of the service record or invoice clearly showing the date, vehicle mileage reading and the repairer/ service agent’s stamp. Drivers should remove any sensitive personal information from such documents. Any repairs made to the vehicle before its return must be to a professional standard by repairers who can provide full warranty on their work. Unauthorised odometer changes are not acceptable. Any odometer malfunctions must have been reported to the leasing company. The driver fully warrants that the mileage reading at the time the vehicle was collected is correct.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Documentation
Appearance
All vehicle documentation must be intact and available including:
The vehicle’s exterior should be sufficiently clean to allow a detailed inspection. The inside should have been valeted and cleared of rubbish. If the vehicle contained a smoker’s pack, the ashtrays must be emptied and the cigarette lighter present.
› the V5C vehicle registration document (where appropriate)
12
› MOT receipt (where appropriate) › operation manual › service record booklet › any other documents relating to the vehicle and its
equipment, eg certificate of recalibration, details of the audio equipment and any security codes.
Vehicle keys A full set of keys, including the spares and locking wheel-nut keys, should be returned if originally supplied.
All documents must be present in the vehicle when it is returned.
PREVIOUS
CONTENTS
NEXT
The BVRLA Fair Wear & Tear Standard (continued)
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Paintwork, vehicle body, bumpers and trim There should be no rust, corrosion or discolouration on any painted area, including painted bumpers, body mouldings and mirrors. Repaired chips, scratches and dents are acceptable provided the work is completed to a professional standard by repairers who can provide full warranty on their work.
13
Obvious evidence of poor repair, such as flaking paint, preparation marks, paint contamination, rippled finish or poorly matched paint, is not acceptable.
Chips
Chips of 3mm or less in diameter are acceptable provided they are not rusted. A maximum of four chips on any panel, six chips per door edge and eight chips on any forwardfacing panel is permitted.
Dents
Dents of 15mm or less in diameter are acceptable provided there are no more than two per panel and the paint surface is not broken.
PREVIOUS
Chips within dents are not acceptable.
CONTENTS
Dents on the roof or on the swage line of any panel are not acceptable.
Measuring chips, dents and scratches
NEXT
Scratches
Surface scratches of 25mm or less where the primer or bare metal is not showing are acceptable provided they can be polished out. A maximum of four surface scratches on one panel is acceptable.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Paintwork, vehicle body, bumpers and trim (continued) Unpainted mouldings, wheel trims
Soft and hard top convertibles
Badges, emblems and labels
Tow bars
Scuffs and scratches of 25mm or less are acceptable provided the moulding or trim is not broken, cracked or deformed.
14
Badges, emblems, labels, logos and advertising livery applied by the customer to the bodywork or glass of the vehicle should be removed before returning the vehicle. Removing badges, emblems, labels, logos and livery must be done professionally and the vehicle returned to its original colour and condition unless otherwise agreed in writing with the vehicle leasing company. Any damage caused by fitting or removing badges, emblems, labels, logos and advertising livery, including faded paintwork, is not acceptable.
Convertible roofs must be fully operative and free from damage, rips and tears. The rear window must not be cracked or creased. Accessories originally supplied, eg wind deflectors, must be present and in good condition.
Tow bars must only be fitted with approval from the leasing company. If fitted, a tow bar must be in good, rust-free condition, with electrical connections that work properly. A ball cover must be in place.
PREVIOUS
CONTENTS
NEXT
Measuring chips, dents and scratches The BVRLA Fair Wear & Tear Standard (continued)
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Windows, glass, door mirrors and lamps Panoramic roofs
The roof must be fully functioning, with no chips, cracks or holes. Surface scratches are acceptable provided they can be polished out. A maximum of four surface scratches on the roof is acceptable.
Windows/windscreens
15
Light scratching is acceptable provided it does not interfere with the driver’s line of sight and the heating elements and the ADAS (automated driver assistance systems) still work properly. The vehicle’s ADAS (automated driver assistance systems) must have been recalibrated according to the vehicle manufacturer’s recommendations if any component part, including windscreen(s) have been replaced. Damage in excess of 10mm in the driver’s line of vision (a vertical strip 290mm wide centred on the steering wheel), or in excess of 40mm elsewhere in the area swept by the vehicle’s wiper blades, is not acceptable. (See diagram on page 17.) Repaired chips are acceptable provided they are repaired to a professional standard and the work is warrantied.
Windscreen wipers must be present, secure and in good condition so that they can clear the windscreen and give the driver a clear view of the road ahead. The washer reservoir must have sufficient liquid to clear the windscreen when working in conjunction with the windscreen wiper blades.
PREVIOUS
Door mirrors
Missing, cracked or damaged door mirror glass and housing units are not acceptable. If adjustable and/or heated door mirrors, they must work correctly.
Lamps and lenses
CONTENTS
NEXT
All lamps and lamp units must work. Minor scuff marks or scratches of 25mm or less are acceptable. Holes or cracks in the glass or plastic covers of lamp units are not acceptable. Where fitted, the vehicle’s ADAS (automated driver assistance systems) must have been recalibrated following the replacement of a lamp or lamp unit.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Windows, glass, door mirrors and lamps (continued)
16
Damage in excess of 10mm in the driver’s line of vision (a vertical strip 290mm wide centred on the steering wheel) or in excess of 40mm elsewhere in the area swept by the vehicle’s wiper blades is NOT ACCEPTABLE.
Max 10mm
290mm PREVIOUS
Max 40mm CONTENTS
NEXT
Centre of driver’s line of vision
The Driver’s Line of Vision
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Tyres and wheels Tyre wear and damage
All tyres, including any spare, must meet minimum UK legal requirements and comply with the vehicle manufacturer’s recommendations of tyre type, class*, size and speed rating for the vehicle. There must be no damage to sidewalls or tread.
17
Evidence of uneven wear due to under- or over-inflation is not acceptable.
EU Tyre Labelling Regulations effective 1 November 2012 describe the performance of a vehicle’s tyres according to three factors: FUEL EFFICIENCY (the tyre’s rolling resistance), VEHICLE SAFETY (the tyre’s wet grip) and
Wheels and wheel trims
Dents on wheel rims and wheel trims are not acceptable. Scuffs up to 50mm on the total circumference of the wheel rim and on alloy wheels are acceptable. Any damage to the wheel spokes, wheel fascia, or hub of the alloy wheel is not acceptable. There should be no rust or corrosion on the alloy wheels.
PREVIOUS
The spare wheel, including ‘spacesaver’ jack and other tools, must be intact, stowed properly and in good working order. The emergency tyre inflation kit, if supplied when new, should be in full working order, serviceable and ready for use. A canister that has been partially or fully discharged should be replaced.
CONTENTS
NEXT
Measuring scuffs
EXTERNAL ROLLING NOISE (expressed in decibels). Replacement tyres should be in the same class as those which are sold on the new vehicle. Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued)
18
Mechanical condition
Vehicle underside
The vehicle should be returned in a safe, legal and reliable mechanical condition, capable of passing an MOT test.
Any impact damage to the vehicle’s underside is not acceptable. Catalytic converters not working because of obvious abuse or damage are not acceptable.
The vehicle’s engine and brake management system should not be displaying any warning light, eg diesel particulate filter (DPF), tyre pressure system (TPS), or oil pressure. If a warning light is illuminated, the vehicle may not be driveable and the collection process abandoned, in which case a fee may be charged. Advisory illuminated alerts are acceptable, eg countdowns to the vehicle’s next service. The following items are not acceptable fair wear and tear, because the driver has neglected to service the vehicle and/or failed to action warning messages from the vehicle management system:
› brakes: eg grooved brake discs or drums caused by
excessive wear or metal to metal contact from worn out disc pads;
PREVIOUS
CONTENTS
NEXT
› engine: eg seized or damaged due to running vehicle
with insufficient coolant or oil, or with broken internal components;
› manual transmission: eg clutch slipping, noisy clutch or gearbox, or excessively worn or ineffective synchromesh;
› automatic transmission: eg noisy gearbox or torque
converter, abrupt gear changes, or loose gear linkage. Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
The BVRLA Fair Wear & Tear Standard (continued)
BVRLA Fair Wear & Tear Guide: Cars
The BVRLA Fair Wear & Tear Standard (continued) Vehicle interior
Equipment and controls
Passenger area, seats, headrests and trim
In-car entertainment equipment, telephones and navigation systems
The interior upholstery and trim must be clean and odourless with no burns, scratches, tears, dents or staining. Carpets should not have holes. All seats originally supplied must be present. Interior fittings such as seat belts, rear view mirrors, courtesy lights, sun visors, door bins, etc, must be present, intact and free of damage.
19 Door aperture, boot, boot liner and luggage area
Scratches on treads, sills and seals that reflect normal use are acceptable. Torn or split floor coverings and damaged surrounding trim panels are not acceptable. Accessories such as parcel shelves, load covers, boot liners, restraining straps and nets must be returned with the vehicle.
All original equipment, accessories and controls must be present and operate correctly (including satellite navigation discs, Secure Digital (SD) cards and remote units, headphones, battery charging leads, Bluetooth and other integrated systems). If accessories such as car telephones and other nonstandard equipment have been wired-in or mounted on the dashboard, any holes or other damage must be neatly repaired when they are removed.
PREVIOUS
CONTENTS
Aerials must be left in place or the hole must be neatly repaired. NEXT
Driver safety equipment
All original fitted electrical equipment, including reversing cameras, adaptive speed controls, speed limiters and lamps, should be present and fully functioning. Any replacements fitted must be of a similar standard and specification to that originally supplied.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
Glossary
BVRLA Fair Wear & Tear Guide: Cars
Glossary ADR
Alternative Dispute Resolution. The BVRLA’s service is approved under the Alternative Dispute Resolution for Consumer Disputes (Competent Authorities and Information) Regulations 2015.
Code of Conduct
20
BVRLA rental and leasing members adhere to a mandatory Code of Conduct. This provides customers with the reassurance that the company they are dealing with is committed to delivering the highest industry standards of professionalism and best-practice. Full details can be found on the BVRLA website.
Chip
Removal of the surface material (glass or paintwork) in a concise area.
Dent
Swage Line
Deformation of the surface structure, usually caused by impact damage.
Scratch
Folded edge on a panel of the vehicle.
Warranty
A mark or score with raised edges in the surface material glass or paintwork.
A written promise to repair or replace a component or to do a piece of work again if it is not satisfactory.
Scuff
Light scraping of top surface not penetrating base material.
Measuring chips, dents, scratches and scuffs
Smart Repair
Small and medium area repair technique; a cost-effective way of repairing chips, dents and scratches
PREVIOUS
CONTENTS
NEXT
Space-saver Wheel
Space-saver wheels are designed for temporary use, to get the driver to a place of repair.
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
About the BVRLA
BVRLA Fair Wear & Tear Guide: Cars
About the BVRLA Established in 1967, the British Vehicle Rental & Leasing Association (BVRLA) is the UK trade body for companies engaged in vehicle rental, leasing and fleet management.
21
On behalf of its 980+ member organisations, the BVRLA works with governments, public sector agencies, industry associations, consumer groups and other stakeholders across a wide range of road transport, environmental, taxation, technology and finance-related issues. BVRLA members are responsible for a combined fleet of over five million cars, vans and trucks on UK roads: that’s 1-in-8 cars, 1-in-5 vans and 1-in-5 trucks. The vehicle rental and leasing industry supports over 465,000 jobs, adds £7.6bn in tax revenues and contributes £49bn to the UK economy each year.
of professionalism and fairness. The association achieves this by maintaining industry standards and regulatory compliance via its mandatory Codes of Conduct, inspection programme and government-approved Alternative Dispute Resolution service. To support this work, the BVRLA promotes best practice through its extensive range of training, events and informationsharing activities.
BVRLA membership provides customers with the reassurance that the company they are dealing with adheres to the highest standards
Licensed by the BVRLA for use by Central Contracts from 22 June 2020 until 21 June 2021
PREVIOUS
CONTENTS
NEXT
River Lodge
British Vehicle Rental & Leasing Association
Badminton Court Amersham Buckinghamshire Tel 01494 434747 Email info@bvrla.co.uk www.bvrla.co.uk © COPYRIGHT 2019
HP7 0DD