- published: 21 Jun 2017
- views: 81176
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small plate ("chip") of semiconductor material, normally silicon. This can be made much smaller than a discrete circuit made from independent electronic components. ICs can be made very compact, having up to several billion transistors and other electronic components in an area the size of a fingernail. The width of each conducting line in a circuit can be made smaller and smaller as the technology advances; in 2008 it dropped below 100 nanometers, and has now been reduced to tens of nanometers.
ICs were made possible by experimental discoveries showing that semiconductor devices could perform the functions of vacuum tubes and by mid-20th-century technology advancements in semiconductor device fabrication. The integration of large numbers of tiny transistors into a small chip was an enormous improvement over the manual assembly of circuits using discrete electronic components. The integrated circuit's mass production capability, reliability and building-block approach to circuit design ensured the rapid adoption of standardized integrated circuits in place of designs using discrete transistors.
Crash Course (also known as Driving Academy) is a 1988 made for television teen film directed by Oz Scott.
Crash Course centers on a group of high schoolers in a driver’s education class; many for the second or third time. The recently divorced teacher, super-passive Larry Pearl, is on thin ice with the football fanatic principal, Principal Paulson, who is being pressured by the district superintendent to raise driver’s education completion rates or lose his coveted football program. With this in mind, Principal Paulson and his assistant, with a secret desire for his job, Abner Frasier, hire an outside driver’s education instructor with a very tough reputation, Edna Savage, aka E.W. Savage, who quickly takes control of the class.
The plot focuses mostly on the students and their interactions with their teachers and each other. In the beginning, Rico is the loner with just a few friends, Chadley is the bookish nerd with few friends who longs to be cool and also longs to be a part of Vanessa’s life who is the young, friendly and attractive girl who had to fake her mother’s signature on her driver’s education permission slip. Kichi is the hip-hop Asian kid who often raps what he has to say and constantly flirts with Maria, the rich foreign girl who thinks that the right-of-way on the roadways always goes to (insert awesomely fake foreign Latino accent) “my father’s limo”. Finally you have stereotypical football meathead J.J., who needs to pass his English exam to keep his eligibility and constantly asks out and gets rejected by Alice, the tomboy whose father owns “Santini & Son” Concrete Company. Alice is portrayed as being the “son” her father wanted.
Get your first two months of CuriosityStream free by going to http://curiositystream.com/crashcourse and using the promo code “crashcourse”. So you may have heard of Moore's Law and while it isn't truly a law it has pretty closely estimated a trend we've seen in the advancement of computing technologies. Moore's Law states that we'll see approximately a 2x increase in transistors in the same space every two years, and while this may not be true for much longer, it has dictated the advancements we've seen since the introduction of transistors in the mid 1950s. So today we're going to talk about those improvements in hardware that made this possible - starting with the third generation of computing and integrated circuits (or ICs) and printed circuit boards (or PCBs). But as these technolog...
A brief introduction to the technology that makes it possible for today's electronics to do so much with very little space - the IC (aka microchip) Learn more here: http://makezine.com/2009/07/13/make-presents-the-integrated-circui/ More Make Presents: Ohm's Law: https://www.youtube.com/watch?v=-mHLvtGjum4 The Resistor: http://www.youtube.com/watch?v=VPVoY1QROMg The Capacitor: http://www.youtube.com/watch?v=ZYH9dGl4gUE The LED: https://www.youtube.com/watch?v=P3PDLsJQcGI The Inductor: https://www.youtube.com/watch?v=STDlCdZnIsw The Multimeter: https://www.youtube.com/watch?v=BW3Wj7UD-_s The Oscilloscope: https://www.youtube.com/watch?v=SxZWcku_Sw0 The Diode: https://www.youtube.com/watch?v=AqzYsuTRVRc The Transistor: https://www.youtube.com/watch?v=-td7YT-Pums
This is the Integrated Circuits Experiment as part of the EE223 Introduction to Digital Electronics Module. This is one of the circuits in the EE223 Introduction to Digital and Analogue electronics module at Dublin City University. The associated materials are at: http://ee223.eeng.dcu.ie/
Integrated Circuit is a component of electronics circuits......
Discover what's inside the electronics you use every day!
people are often afraid of chips (IC's) and are confused by them. in this video I go over the basics of integrated circuits. there is no need to be afraid of them.
Integrated Circuit The integrated circuit was independently designed by Jack Kilby at Texas Instruments in late 1958 and by Robert Noyce at Fairchild Camera and instrument in early 1959. An integrated circuit is a collection of interconnected transistors, diods, resistors and capacitors fabricated on a single piece of silicon known as chip. What is a chip? A chip is a part of a single crystal of silicon which is cut into thin slices approximately 0.05 cm in thickness. The slice of silicon crystal is called a wafer. Integrated Circuits are used in a variety of devices like microprocessors audio and video equipment due to their small size integrated circuits are used in almost every type of electronic equipments. Integrated Circuits are categorised are monolithic IC and hybrid IC. The Mono...
In this video I take you on a tour of the visible internal workings of a 27C512 EPROM microchip, with the aid of an optical microscope at up to 800x magnification. With any luck, you won't find it too boring and you'll learn a bit about what's inside a microchip and how they work. Addendums and corrections have been made in annotations. As annotations are not available on mobile devices, if you wish to see these you should view this video on a computer. Thumbnail image by Zephyris (Own work) [CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons Channel owned and operated by Dan the Man. www.DantheMan.weebly.com. Proudly a member of the Fullscreen community. Thank you for your support, you're all awesome!
I thought it would be interesting to try decapping some chips. This involves using fuming nitric acid, which also seemed fun, so I thought I would give it a go. The process starts by milling a precise pocket into the IC using my CNC machine. I used carbide tooling to cut the glass fiber/epoxy material. I then put a drop or two of the acid into the pocket, and raised the temperature to about 100*C. The acid dissolves the epoxy packaging as it sort of "dries". I added more acid to the pocket every few minutes. After about 10 minutes, I washed the IC in acetone, then reapplied acid if there was still material left on the die. Eventually, it was all cleared away, and I had a nice decapped IC.
Get your first two months of CuriosityStream free by going to http://curiositystream.com/crashcourse and using the promo code “crashcourse”. So you may have heard of Moore's Law and while it isn't truly a law it has pretty closely estimated a trend we've seen in the advancement of computing technologies. Moore's Law states that we'll see approximately a 2x increase in transistors in the same space every two years, and while this may not be true for much longer, it has dictated the advancements we've seen since the introduction of transistors in the mid 1950s. So today we're going to talk about those improvements in hardware that made this possible - starting with the third generation of computing and integrated circuits (or ICs) and printed circuit boards (or PCBs). But as these technolog...
A brief introduction to the technology that makes it possible for today's electronics to do so much with very little space - the IC (aka microchip) Learn more here: http://makezine.com/2009/07/13/make-presents-the-integrated-circui/ More Make Presents: Ohm's Law: https://www.youtube.com/watch?v=-mHLvtGjum4 The Resistor: http://www.youtube.com/watch?v=VPVoY1QROMg The Capacitor: http://www.youtube.com/watch?v=ZYH9dGl4gUE The LED: https://www.youtube.com/watch?v=P3PDLsJQcGI The Inductor: https://www.youtube.com/watch?v=STDlCdZnIsw The Multimeter: https://www.youtube.com/watch?v=BW3Wj7UD-_s The Oscilloscope: https://www.youtube.com/watch?v=SxZWcku_Sw0 The Diode: https://www.youtube.com/watch?v=AqzYsuTRVRc The Transistor: https://www.youtube.com/watch?v=-td7YT-Pums
This is the Integrated Circuits Experiment as part of the EE223 Introduction to Digital Electronics Module. This is one of the circuits in the EE223 Introduction to Digital and Analogue electronics module at Dublin City University. The associated materials are at: http://ee223.eeng.dcu.ie/
Integrated Circuit is a component of electronics circuits......
Discover what's inside the electronics you use every day!
people are often afraid of chips (IC's) and are confused by them. in this video I go over the basics of integrated circuits. there is no need to be afraid of them.
Integrated Circuit The integrated circuit was independently designed by Jack Kilby at Texas Instruments in late 1958 and by Robert Noyce at Fairchild Camera and instrument in early 1959. An integrated circuit is a collection of interconnected transistors, diods, resistors and capacitors fabricated on a single piece of silicon known as chip. What is a chip? A chip is a part of a single crystal of silicon which is cut into thin slices approximately 0.05 cm in thickness. The slice of silicon crystal is called a wafer. Integrated Circuits are used in a variety of devices like microprocessors audio and video equipment due to their small size integrated circuits are used in almost every type of electronic equipments. Integrated Circuits are categorised are monolithic IC and hybrid IC. The Mono...
In this video I take you on a tour of the visible internal workings of a 27C512 EPROM microchip, with the aid of an optical microscope at up to 800x magnification. With any luck, you won't find it too boring and you'll learn a bit about what's inside a microchip and how they work. Addendums and corrections have been made in annotations. As annotations are not available on mobile devices, if you wish to see these you should view this video on a computer. Thumbnail image by Zephyris (Own work) [CC-BY-SA-3.0 (http://creativecommons.org/licenses/by-sa/3.0)], via Wikimedia Commons Channel owned and operated by Dan the Man. www.DantheMan.weebly.com. Proudly a member of the Fullscreen community. Thank you for your support, you're all awesome!
I thought it would be interesting to try decapping some chips. This involves using fuming nitric acid, which also seemed fun, so I thought I would give it a go. The process starts by milling a precise pocket into the IC using my CNC machine. I used carbide tooling to cut the glass fiber/epoxy material. I then put a drop or two of the acid into the pocket, and raised the temperature to about 100*C. The acid dissolves the epoxy packaging as it sort of "dries". I added more acid to the pocket every few minutes. After about 10 minutes, I washed the IC in acetone, then reapplied acid if there was still material left on the die. Eventually, it was all cleared away, and I had a nice decapped IC.
people are often afraid of chips (IC's) and are confused by them. in this video I go over the basics of integrated circuits. there is no need to be afraid of them.
[Recorded: October, 1967] This half hour color promotional/educational film on the integrated circuit was produced and sponsored by Fairchild Semiconductor Corporation and first shown on television on October 11, 1967. In the film, Dr. Harry Sello and Dr. Jim Angell describe the integrated circuit (IC), discuss its design and development process, and offer examples of late 1960s uses of IC technology. Fairchild Semiconductor Corporation was one of the most influential early high-tech companies. Founded in Palo Alto California in 1957 by eight scientists and engineers from Shockley Semiconductor Laboratory, Fairchild Semiconductor Corporation was funded by Fairchild Camera and Instrument Corporation of Syossett, New York. Rapidly establishing itself as a technology innovator based on its in...
Ken Shirriff has seen the insides of more integrated circuits than most people have seen bellybuttons. (This is an exaggeration.) But the point is, where we see a crazy jumble of circuitry, Ken sees a riddle to be solved, and he's got a method that guides him through the madness. In his talk at the 2016 Hackaday SuperConference, Ken stepped the audience through a number of famous chips, showing how he approaches them and how you could do the same if you wanted to, or needed to. Reading an IC from a photo is not for the faint of heart, but with a little perseverance, it can give you the keys to the kingdom. We're stoked that Ken shared his methods with us, and gave us some deeper insight into a handful of classic silicon, from the Z80 processor to the 555 timer and LM7805 voltage regulator...
We learn about integrated circuits, specifically the 555 timer! See my website: https://codenmore.github.io/ Follow me on Twitter - @CodeNMore - http://www.twitter.com/CodeNMore Comment, PM, or Tweet me for help! Teaching to understand all subjects to the fullest extent!
Certainly not a mandatory addition for your collection of test and measurement-equipment. But useful if you a large collection of ICs of unknown origin or functionality.
In this video we will introduce and take a look at Integrated Circuits and using these components in Hobbyist Electronics circuits. Using a 555 timer IC we will see how we set this up on a breadboard and examine the output square wave on an Oscilloscope. Checkout this link for 555 timer circuit setup http://www.electronics-tutorials.ws/waveforms/555_oscillator.html
Все знают, как я люблю строить сложные редстоун-схемы на Project:R3D. И, иногда получается так, что схема просто физически не входит в постройку, или, если входит, то выглядит просто ужасно. Мод Integrated Circuits позволит вам делать сложные схемы размером в один блок! Как? Смотрите в обзоре. Версия майнкрафт: 1.7.10 Версия мода: 0.9r34.146 Ссылка: http://www.minecraftforum.net/forums/mapping-and-modding/minecraft-mods/wip-mods/2352247-integrated-circuits-alpha-ics-for-minecraft Группа ВК канала: http://vk.com/zigthehedge Группа ВК сервера: http://vk.com/cwelth Сайт сервера: http://www.cwelth.com/ Мой твиттер: https://twitter.com/ZigTheHedge Партнерская программа для youtube: http://bit.ly/1hlVHGL Понравился обзор? Здесь еще! https://www.youtube.com/playlist?list=PL7sA4KKfs2d9Kmwmbo3UQ...
The idea of integrating electronic circuits into a single device was born when the German physicist and engineer Werner Jacobi developed and patented the first known integrated transistor amplifier in 1949 and the British radio engineer Geoffrey Dummer proposed to integrate a variety of standard electronic components in a monolithic semiconductor crystal in 1952. A year later, Harwick Johnson filed a patent for a prototype integrated circuit. These ideas could not be implemented by the industry in the early 1950s, but a breakthrough came in late 1958. Three people from three U.S. companies solved three fundamental problems that hindered the production of integrated circuits. Jack Kilby of Texas Instruments patented the principle of integration, created the first prototype ICs and commercia...
PART 1: http://www.youtube.com/watch?v=J5Sb21qbpEQ PART 2: http://www.youtube.com/watch?v=fYz5nIHH0iY Part 3 of the hand soldering tutorial. This time Dave shows you how to drag solder and tack & reflow SMD components, and in particular 0.5mm fine pitch IC's. Including solder paste and hot air.
An integrated circuit or monolithic integrated circuit (also referred to as an IC, a chip, or a microchip) is a set of electronic circuits on one small plate ("chip") of semiconductor material, normally silicon. This can be made much smaller than a discrete circuit made from independent components. ICs can be made very compact, having up to several billion transistors and other electronic components in an area the size of a fingernail. The width of each conducting line in a circuit can be made smaller and smaller as the technology advances; in 2008 it dropped below 100 nanometers and in 2013 it was expected to be in the tens of nanometers. ICs were made possible by experimental discoveries showing that semiconductor devices could perform the functions of vacuum tubes and by mid-20th-centur...