-
Why D65 / Daylight White Point Matters (EP.98)
If you have smartphones, tablets, monitors or TVs in your frames / footage then understanding D65 or Daylight White Point might be (is), important. Watch this episode to learn more!
Note: When I change color temperatures, the before/after will be differemt in terms of the warmth of my skin tone based on the color temps I am using.
Products shown, mentioned and/or used in this episode...
Sekonic Spectrometer C-800
B&H;: https://bhpho.to/48pGK6g
Calibrite ColorChecker Video
B&H;: https://bhpho.to/48h2BMR
Newsshooter
https://www.newsshooter.com/2023/09/07/kelvin-epos-300-full-rgb-led-light-review/
Matt Allard
https://www.matthewallardacs.com/
iPad Mini (6th Generation)
B&H;: https://bhpho.to/3TCHwbo
Sony FX30
B&H;: https://bhpho.to/45OxwhT
Sony a7C II
B&H;: https://bhpho.to/3GGc2cz
Sigma...
published: 03 Jan 2024
-
KBDfans D65 Build guide
Manual:https://shimo.im/docs/GxgK8YQX9pCcHqwh
Product:https://kbdfans.com/collections/diy-kit/products/icd65-mechanical-keyboard-kit
published: 11 Nov 2020
-
Komatsu D65-18 and D85-18 Operator Controls
An inside look at Komatsu's D65-18 and D85-18 operator controls.
Learn more about the D65EX-18: https://bit.ly/2AKy92T
Learn more about the D85EX-18: https://bit.ly/3f0GAGg
published: 07 Aug 2018
-
Epiroc SmartROC D65
A walkaround video with Global Product Manager, Mattias Hjerpe, guiding you through the new generation SmartROC D65
published: 22 Mar 2023
-
E-White KBDFANS D65 Build + C3 Tangerine Linear Switches - Gasket Mount Goodness!
Welcome back to the channel! My KBDFANS D65 has finally arrived, and I had a blast building it! The D65 is a newer entry into the KBDFANS family, with a new gasket design in a sleek and rounded aluminum case. The Case is complemented nicely with a brass weight, and overall fit, feel and finish of the E-White was flawless.
For this build, I went with lubed and filmed C3 Equalz Tangerine Linear switches, which are known for their absolute smoothness and tight stem/housing tolerance.
The combination of a gasket mount keyboard and the buttery smooth Tangies yields an extremely smooth, gentle and wonderfully poppy typing experience!
Hope you enjoy the video!
KBDFANS D65 Aluminum - E-White
Full Brass Plate + KBD67 MK II Hot-Swap RGB PCB
Foam: KBDFANS KBD67 MK II Pre-Cut Case + Plate
Prod...
published: 19 Jan 2021
-
How to troubleshoot no flushing air | FlexiROC D60 | FlexiROC D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, demonstrates how to troubleshoot a no-flushing-air issue on a FlexiROC drill rig, specifically the Flexiroc D60 and D65 models. Learn how to identify and resolve the problem related to proximity switches in the rod handling system. Watch the video to learn the troubleshooting steps and ensure proper flushing air for drilling.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any...
published: 12 Jan 2023
-
How to properly start and stop a rig | FlexiROC D60 | FlexiROC D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, explains the proper procedure for starting and stopping the FlexiROC D65 drill rig. Learn how to turn on the battery, start up the rig from inside the cab using the key switch and safety blue button, and clear any emergency stop issues.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any unauthorized use, broadcasting, transmission, copying or re-recording of the contents or a...
published: 12 Jan 2023
-
Keyboard Build - KBDfans D65
Back with another keyboard build.
Build Info:
Board: KBDfans D65 - Black aluminum case with polycarbonate plate
Switches: Durock Smokey Purple 67G Linear - Krytox 205g0 lube, Deskey switch films
Keycaps: GMK Pulse
Main Channel: http://YouTube.com/theproperpeople
http://theproperpeople.com
JOIN US ON:
http://facebook.com/theproperpeople
http://twitter.com/theproperpeople
http://instagram.com/theproperpeople
https://www.reddit.com/r/theproperpeople
https://discord.gg/theproperpeople
Enjoying our videos? Help us make more by buying a print: http://theproperpeople.com/shop
Supporting us on Patreon:
http://patreon.com/theproperpeople
Purchasing a t-shirt: http://theproperpeople.com/merch
Or shopping through our Amazon affiliate link: https://www.amazon.com/?tag=thepropeo0d-20
published: 14 Jan 2021
-
Too Many Certaphone D65 Exploted
published: 24 Feb 2024
-
SmartROC D65 – First choice for Kaunis Iron
Two years after Kaunis Iron started production of iron ore in Kaunisvaara, the company is planning a new open pit mine. An important part of that plan is SmartROC D65 rigs.
published: 12 Feb 2021
7:51
Why D65 / Daylight White Point Matters (EP.98)
If you have smartphones, tablets, monitors or TVs in your frames / footage then understanding D65 or Daylight White Point might be (is), important. Watch this e...
If you have smartphones, tablets, monitors or TVs in your frames / footage then understanding D65 or Daylight White Point might be (is), important. Watch this episode to learn more!
Note: When I change color temperatures, the before/after will be differemt in terms of the warmth of my skin tone based on the color temps I am using.
Products shown, mentioned and/or used in this episode...
Sekonic Spectrometer C-800
B&H;: https://bhpho.to/48pGK6g
Calibrite ColorChecker Video
B&H;: https://bhpho.to/48h2BMR
Newsshooter
https://www.newsshooter.com/2023/09/07/kelvin-epos-300-full-rgb-led-light-review/
Matt Allard
https://www.matthewallardacs.com/
iPad Mini (6th Generation)
B&H;: https://bhpho.to/3TCHwbo
Sony FX30
B&H;: https://bhpho.to/45OxwhT
Sony a7C II
B&H;: https://bhpho.to/3GGc2cz
Sigma 18-50mm DC DN Lens
B&H;: https://bhpho.to/460eFjX
RØDE NTG5 Mic
B&H;: https://bhpho.to/3L5ortf
Sound Devices MixPre-6 II
B&H;: https://bhpho.to/3GF0ExR
Kelvin Epos 300
B&H;: https://bhpho.to/46qquQD
DoPchoice Octa 3
B&H;: https://bhpho.to/3MRPid8
--
If you just want to make general equipment purchases (browse & buy), but don't want to use the product specific links above, please use these generic affiliate links as they don't cost you extra and help the channel...
B&H; PHOTO VIDEO
https://bhpho.to/2LTTxCz
AMAZON
https://geni.us/abao
FJ WESTCOTT
https://www.fjwestcott.com/?sca_ref=2860318.FI3ZaeiwXy
TIFFEN
https://bit.ly/3Nxuckw
set.a.light 3D
https://www.elixxier.com/en/set-a-light-3d/#v2=6528884866d9b
Use code "thec47" to save 20% off of your cart price.
—
Subscribe to theC47's YouTube Channel...
http://www.youtube.com/user/theC47?sub_confirmation=1
Visit theC47's web site for more information about the company...
http://www.thec47.com
Interested in theC47 producing your next project or in online or onsite training or consulting?...
https://thec47.com/contact
Additional Equipment & Gear Recommendations...
https://thec47.com/gear
—
Also check out theC47’s Amazon Influencer Page for some of our favorite stuff for video production, filmmaking and photography…
https://www.amazon.com/shop/thec47
Thanks for your support!
—
DISCLAIMERS
Content on theC47’s YouTube Channel is not aggregated content. It is created by Jem Schofield and theC47. Any playlists included on this channel to external content on YouTube is included because they contain works that were produced, directed and/or dp’d by Jem Schofield and theC47.
The Daily Drop, GearBox, other recorded and uploaxded content and any live streams on theC47's YouTube channel are rarely sponsored (and will state if they are). Episodes may include equipment owned by Jem Schofield & theC47 and/or provided to theC47 by outside companies & manufacturers. The content and any views expressed on this channel are solely those of Jem Schofield, theC47 and any guests. No content created specifically for the channel contains anything but personal views and is not content dictated by outside companies or manufacturers (even if it's sponsered content).
Many external links to products on this YouTube channel are to affiliates of theC47. Links were current at time of posting. There is no additional cost to buyers if they purchase products using these links and purchases help theC47 continue to create free content on this channel!
Notes: 1) As with any Amazon purchase you make, please do your research when choosing a reseller for the product/s you are purchasing. Check ratings and read reviews. 2) If you find a link is not working please let us know by visiting www.thec47.com/contact
To read theC47's full copyright, terms & disclosures you can visit https://thec47.com/site-terms
#ep098
https://wn.com/Why_D65_Daylight_White_Point_Matters_(Ep.98)
If you have smartphones, tablets, monitors or TVs in your frames / footage then understanding D65 or Daylight White Point might be (is), important. Watch this episode to learn more!
Note: When I change color temperatures, the before/after will be differemt in terms of the warmth of my skin tone based on the color temps I am using.
Products shown, mentioned and/or used in this episode...
Sekonic Spectrometer C-800
B&H;: https://bhpho.to/48pGK6g
Calibrite ColorChecker Video
B&H;: https://bhpho.to/48h2BMR
Newsshooter
https://www.newsshooter.com/2023/09/07/kelvin-epos-300-full-rgb-led-light-review/
Matt Allard
https://www.matthewallardacs.com/
iPad Mini (6th Generation)
B&H;: https://bhpho.to/3TCHwbo
Sony FX30
B&H;: https://bhpho.to/45OxwhT
Sony a7C II
B&H;: https://bhpho.to/3GGc2cz
Sigma 18-50mm DC DN Lens
B&H;: https://bhpho.to/460eFjX
RØDE NTG5 Mic
B&H;: https://bhpho.to/3L5ortf
Sound Devices MixPre-6 II
B&H;: https://bhpho.to/3GF0ExR
Kelvin Epos 300
B&H;: https://bhpho.to/46qquQD
DoPchoice Octa 3
B&H;: https://bhpho.to/3MRPid8
--
If you just want to make general equipment purchases (browse & buy), but don't want to use the product specific links above, please use these generic affiliate links as they don't cost you extra and help the channel...
B&H; PHOTO VIDEO
https://bhpho.to/2LTTxCz
AMAZON
https://geni.us/abao
FJ WESTCOTT
https://www.fjwestcott.com/?sca_ref=2860318.FI3ZaeiwXy
TIFFEN
https://bit.ly/3Nxuckw
set.a.light 3D
https://www.elixxier.com/en/set-a-light-3d/#v2=6528884866d9b
Use code "thec47" to save 20% off of your cart price.
—
Subscribe to theC47's YouTube Channel...
http://www.youtube.com/user/theC47?sub_confirmation=1
Visit theC47's web site for more information about the company...
http://www.thec47.com
Interested in theC47 producing your next project or in online or onsite training or consulting?...
https://thec47.com/contact
Additional Equipment & Gear Recommendations...
https://thec47.com/gear
—
Also check out theC47’s Amazon Influencer Page for some of our favorite stuff for video production, filmmaking and photography…
https://www.amazon.com/shop/thec47
Thanks for your support!
—
DISCLAIMERS
Content on theC47’s YouTube Channel is not aggregated content. It is created by Jem Schofield and theC47. Any playlists included on this channel to external content on YouTube is included because they contain works that were produced, directed and/or dp’d by Jem Schofield and theC47.
The Daily Drop, GearBox, other recorded and uploaxded content and any live streams on theC47's YouTube channel are rarely sponsored (and will state if they are). Episodes may include equipment owned by Jem Schofield & theC47 and/or provided to theC47 by outside companies & manufacturers. The content and any views expressed on this channel are solely those of Jem Schofield, theC47 and any guests. No content created specifically for the channel contains anything but personal views and is not content dictated by outside companies or manufacturers (even if it's sponsered content).
Many external links to products on this YouTube channel are to affiliates of theC47. Links were current at time of posting. There is no additional cost to buyers if they purchase products using these links and purchases help theC47 continue to create free content on this channel!
Notes: 1) As with any Amazon purchase you make, please do your research when choosing a reseller for the product/s you are purchasing. Check ratings and read reviews. 2) If you find a link is not working please let us know by visiting www.thec47.com/contact
To read theC47's full copyright, terms & disclosures you can visit https://thec47.com/site-terms
#ep098
- published: 03 Jan 2024
- views: 458
13:02
KBDfans D65 Build guide
Manual:https://shimo.im/docs/GxgK8YQX9pCcHqwh
Product:https://kbdfans.com/collections/diy-kit/products/icd65-mechanical-keyboard-kit
Manual:https://shimo.im/docs/GxgK8YQX9pCcHqwh
Product:https://kbdfans.com/collections/diy-kit/products/icd65-mechanical-keyboard-kit
https://wn.com/Kbdfans_D65_Build_Guide
Manual:https://shimo.im/docs/GxgK8YQX9pCcHqwh
Product:https://kbdfans.com/collections/diy-kit/products/icd65-mechanical-keyboard-kit
- published: 11 Nov 2020
- views: 30924
5:41
Komatsu D65-18 and D85-18 Operator Controls
An inside look at Komatsu's D65-18 and D85-18 operator controls.
Learn more about the D65EX-18: https://bit.ly/2AKy92T
Learn more about the D85EX-18: https:...
An inside look at Komatsu's D65-18 and D85-18 operator controls.
Learn more about the D65EX-18: https://bit.ly/2AKy92T
Learn more about the D85EX-18: https://bit.ly/3f0GAGg
https://wn.com/Komatsu_D65_18_And_D85_18_Operator_Controls
An inside look at Komatsu's D65-18 and D85-18 operator controls.
Learn more about the D65EX-18: https://bit.ly/2AKy92T
Learn more about the D85EX-18: https://bit.ly/3f0GAGg
- published: 07 Aug 2018
- views: 55204
5:45
Epiroc SmartROC D65
A walkaround video with Global Product Manager, Mattias Hjerpe, guiding you through the new generation SmartROC D65
A walkaround video with Global Product Manager, Mattias Hjerpe, guiding you through the new generation SmartROC D65
https://wn.com/Epiroc_Smartroc_D65
A walkaround video with Global Product Manager, Mattias Hjerpe, guiding you through the new generation SmartROC D65
- published: 22 Mar 2023
- views: 6822
10:45
E-White KBDFANS D65 Build + C3 Tangerine Linear Switches - Gasket Mount Goodness!
Welcome back to the channel! My KBDFANS D65 has finally arrived, and I had a blast building it! The D65 is a newer entry into the KBDFANS family, with a new g...
Welcome back to the channel! My KBDFANS D65 has finally arrived, and I had a blast building it! The D65 is a newer entry into the KBDFANS family, with a new gasket design in a sleek and rounded aluminum case. The Case is complemented nicely with a brass weight, and overall fit, feel and finish of the E-White was flawless.
For this build, I went with lubed and filmed C3 Equalz Tangerine Linear switches, which are known for their absolute smoothness and tight stem/housing tolerance.
The combination of a gasket mount keyboard and the buttery smooth Tangies yields an extremely smooth, gentle and wonderfully poppy typing experience!
Hope you enjoy the video!
KBDFANS D65 Aluminum - E-White
Full Brass Plate + KBD67 MK II Hot-Swap RGB PCB
Foam: KBDFANS KBD67 MK II Pre-Cut Case + Plate
Products Shown on video
https://kbdfans.com/r?id=gj29u8
C3 Tangerine Linear 67g Durock Spring + KEBO films + Krytox 205G0
Keycaps: PBT Dye-Sub Cherry Profile 9009
Stabilizers: Durock V2 Screw-In + Krytox 205g0 + Permatex
Shot on Sony A7 III + Sony FE35mm F1.8 and Fifine Condenser Mic
https://wn.com/E_White_Kbdfans_D65_Build_C3_Tangerine_Linear_Switches_Gasket_Mount_Goodness
Welcome back to the channel! My KBDFANS D65 has finally arrived, and I had a blast building it! The D65 is a newer entry into the KBDFANS family, with a new gasket design in a sleek and rounded aluminum case. The Case is complemented nicely with a brass weight, and overall fit, feel and finish of the E-White was flawless.
For this build, I went with lubed and filmed C3 Equalz Tangerine Linear switches, which are known for their absolute smoothness and tight stem/housing tolerance.
The combination of a gasket mount keyboard and the buttery smooth Tangies yields an extremely smooth, gentle and wonderfully poppy typing experience!
Hope you enjoy the video!
KBDFANS D65 Aluminum - E-White
Full Brass Plate + KBD67 MK II Hot-Swap RGB PCB
Foam: KBDFANS KBD67 MK II Pre-Cut Case + Plate
Products Shown on video
https://kbdfans.com/r?id=gj29u8
C3 Tangerine Linear 67g Durock Spring + KEBO films + Krytox 205G0
Keycaps: PBT Dye-Sub Cherry Profile 9009
Stabilizers: Durock V2 Screw-In + Krytox 205g0 + Permatex
Shot on Sony A7 III + Sony FE35mm F1.8 and Fifine Condenser Mic
- published: 19 Jan 2021
- views: 85773
1:32
How to troubleshoot no flushing air | FlexiROC D60 | FlexiROC D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, demonstrates how to troubleshoot a no-flushing-air issue on a FlexiROC drill rig, specifically the Fle...
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, demonstrates how to troubleshoot a no-flushing-air issue on a FlexiROC drill rig, specifically the Flexiroc D60 and D65 models. Learn how to identify and resolve the problem related to proximity switches in the rod handling system. Watch the video to learn the troubleshooting steps and ensure proper flushing air for drilling.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any unauthorized use, broadcasting, transmission, copying or re-recording of the contents or any part thereof is prohibited. Photos and videos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Under no circumstance will Epiroc be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Epiroc or a third party. In no event shall Epiroc be liable for any direct, indirect, punitive, incidental, special consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Epiroc, it cannot guarantee against improper use or unauthorized modification of this information. Epiroc assumes no liability for property damage or injury as a result of any of the information contained in this video. Use this information at your own risk. Epiroc recommends safe practiced when performing any do it yourself repairs and maintenance and or with tools seen or implied in this video. Due to factors beyond the control of Epiroc, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Epiroc.
https://wn.com/How_To_Troubleshoot_No_Flushing_Air_|_Flexiroc_D60_|_Flexiroc_D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, demonstrates how to troubleshoot a no-flushing-air issue on a FlexiROC drill rig, specifically the Flexiroc D60 and D65 models. Learn how to identify and resolve the problem related to proximity switches in the rod handling system. Watch the video to learn the troubleshooting steps and ensure proper flushing air for drilling.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any unauthorized use, broadcasting, transmission, copying or re-recording of the contents or any part thereof is prohibited. Photos and videos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Under no circumstance will Epiroc be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Epiroc or a third party. In no event shall Epiroc be liable for any direct, indirect, punitive, incidental, special consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Epiroc, it cannot guarantee against improper use or unauthorized modification of this information. Epiroc assumes no liability for property damage or injury as a result of any of the information contained in this video. Use this information at your own risk. Epiroc recommends safe practiced when performing any do it yourself repairs and maintenance and or with tools seen or implied in this video. Due to factors beyond the control of Epiroc, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Epiroc.
- published: 12 Jan 2023
- views: 378
2:17
How to properly start and stop a rig | FlexiROC D60 | FlexiROC D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, explains the proper procedure for starting and stopping the FlexiROC D65 drill rig. Learn how to turn ...
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, explains the proper procedure for starting and stopping the FlexiROC D65 drill rig. Learn how to turn on the battery, start up the rig from inside the cab using the key switch and safety blue button, and clear any emergency stop issues.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any unauthorized use, broadcasting, transmission, copying or re-recording of the contents or any part thereof is prohibited. Photos and videos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Under no circumstance will Epiroc be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Epiroc or a third party. In no event shall Epiroc be liable for any direct, indirect, punitive, incidental, special consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Epiroc, it cannot guarantee against improper use or unauthorized modification of this information. Epiroc assumes no liability for property damage or injury as a result of any of the information contained in this video. Use this information at your own risk. Epiroc recommends safe practiced when performing any do it yourself repairs and maintenance and or with tools seen or implied in this video. Due to factors beyond the control of Epiroc, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Epiroc.
https://wn.com/How_To_Properly_Start_And_Stop_A_Rig_|_Flexiroc_D60_|_Flexiroc_D65
In this Epiroc 24/7 video, Jon Larson, Technical Trainer, explains the proper procedure for starting and stopping the FlexiROC D65 drill rig. Learn how to turn on the battery, start up the rig from inside the cab using the key switch and safety blue button, and clear any emergency stop issues.
Applies to the following models:
FlexiROC D60 | FlexiROC D65
#Epiroc247 #EquipmentMaintenance #SurfaceRigs
Warning: Read and follow all labels and the Owner’s Manual carefully before installing, operating, or servicing unit. Read the safety information at the beginning of the manual and in each section.
Disclaimer: Legal Notice © Copyright 2022. All product names in this video are trademarks of Epiroc. Any unauthorized use, broadcasting, transmission, copying or re-recording of the contents or any part thereof is prohibited. Photos and videos may show equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Under no circumstance will Epiroc be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by Epiroc or a third party. In no event shall Epiroc be liable for any direct, indirect, punitive, incidental, special consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of Epiroc, it cannot guarantee against improper use or unauthorized modification of this information. Epiroc assumes no liability for property damage or injury as a result of any of the information contained in this video. Use this information at your own risk. Epiroc recommends safe practiced when performing any do it yourself repairs and maintenance and or with tools seen or implied in this video. Due to factors beyond the control of Epiroc, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Epiroc.
- published: 12 Jan 2023
- views: 2727
5:27:08
Keyboard Build - KBDfans D65
Back with another keyboard build.
Build Info:
Board: KBDfans D65 - Black aluminum case with polycarbonate plate
Switches: Durock Smokey Purple 67G Linear - Kry...
Back with another keyboard build.
Build Info:
Board: KBDfans D65 - Black aluminum case with polycarbonate plate
Switches: Durock Smokey Purple 67G Linear - Krytox 205g0 lube, Deskey switch films
Keycaps: GMK Pulse
Main Channel: http://YouTube.com/theproperpeople
http://theproperpeople.com
JOIN US ON:
http://facebook.com/theproperpeople
http://twitter.com/theproperpeople
http://instagram.com/theproperpeople
https://www.reddit.com/r/theproperpeople
https://discord.gg/theproperpeople
Enjoying our videos? Help us make more by buying a print: http://theproperpeople.com/shop
Supporting us on Patreon:
http://patreon.com/theproperpeople
Purchasing a t-shirt: http://theproperpeople.com/merch
Or shopping through our Amazon affiliate link: https://www.amazon.com/?tag=thepropeo0d-20
https://wn.com/Keyboard_Build_Kbdfans_D65
Back with another keyboard build.
Build Info:
Board: KBDfans D65 - Black aluminum case with polycarbonate plate
Switches: Durock Smokey Purple 67G Linear - Krytox 205g0 lube, Deskey switch films
Keycaps: GMK Pulse
Main Channel: http://YouTube.com/theproperpeople
http://theproperpeople.com
JOIN US ON:
http://facebook.com/theproperpeople
http://twitter.com/theproperpeople
http://instagram.com/theproperpeople
https://www.reddit.com/r/theproperpeople
https://discord.gg/theproperpeople
Enjoying our videos? Help us make more by buying a print: http://theproperpeople.com/shop
Supporting us on Patreon:
http://patreon.com/theproperpeople
Purchasing a t-shirt: http://theproperpeople.com/merch
Or shopping through our Amazon affiliate link: https://www.amazon.com/?tag=thepropeo0d-20
- published: 14 Jan 2021
- views: 10224
4:17
SmartROC D65 – First choice for Kaunis Iron
Two years after Kaunis Iron started production of iron ore in Kaunisvaara, the company is planning a new open pit mine. An important part of that plan is SmartR...
Two years after Kaunis Iron started production of iron ore in Kaunisvaara, the company is planning a new open pit mine. An important part of that plan is SmartROC D65 rigs.
https://wn.com/Smartroc_D65_–_First_Choice_For_Kaunis_Iron
Two years after Kaunis Iron started production of iron ore in Kaunisvaara, the company is planning a new open pit mine. An important part of that plan is SmartROC D65 rigs.
- published: 12 Feb 2021
- views: 7992