- published: 24 Apr 2016
- views: 52456
Create your page here
-
remove the playlistMold
-
remove the playlistLatest Videos
-
remove the playlistLongest Videos
- remove the playlistMold
- remove the playlistLatest Videos
- remove the playlistLongest Videos
back to playlist
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato
More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food
music by https://www.youtube.com/user/StormwaveAudio
© STORMWAVE Audio - The Beast
subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1
© TEMPONAUT - https://www.time-lapse-footage.com
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold
Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible.
Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more.
Subscribe to my channel for more natural health remedies!
Facebook: https://www.facebook.com/DrJoshAxe/
Instagram: https://www.instagram.com/drjoshaxe/
Pinterest: https://www.pinterest.com/draxe/
Twitter: https://twitter.com/drjoshaxe
---------------------------------------------------------------
Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/
*This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.
- published: 01 Mar 2017
- views: 71279
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
- published: 12 Nov 2014
- views: 22188846
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on every internet store.
Mold (Single 2017)
iTunes
http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes
Mold is from the album called "86". Find it on iTunes:
http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes
Physical CD and T-shirts on ebay
http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40
Video was directed by Igor Levinsky 2016-2017
Visual Effects made by Vidick
Lena Scissorhands (hair and make up artist)
Produced by Voluta Valentin and Infected Rain
Turntables by DJ Bishop
Special thanks to Alexander Ionescu.
Bandsintown - https://www.bandsintown.com/InfectedRain
Official Page: http://infectedrain.com/
E-mail: infectedrain1@gmail.com
- published: 01 Jan 2017
- views: 775343
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health issues.
However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects.
However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons.
Yet, these are the most common signs of mold illness:
Headache
Fatigue, post-exercise malaise, and weakness
Memory problems, focusing issues, executive function problems, brain fog
Light sensitivity, blurred vision, red eyes
Sinus problems, air hunger, cough, shortness of breath, asthma-like signs
Vertigo
Static “shocks”
Weight gain despite sufficient effort (weight loss resistance)
Tremors
Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain
Persistent nerve pain
Numbness and tingling
Abdominal pain, diarrhea, appetite changes, nausea
Night sweats or temperature regulation issues
Excessive thirst
Increased urination
Metallic taste
Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades.
Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye.
Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry.
Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months.
Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air.
Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness.
Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence.
Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS).
Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows:
Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “
Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.”
Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness.
As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR).
Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness.
Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it.
In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response.
Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long.
The diagnosis of CIRS requires the presence of the following criteria:
Abnormalities documented by Visual Co
- published: 28 Feb 2017
- views: 7735
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
- published: 19 Mar 2011
- views: 1153306
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door...
If you liked this clip check out the rest of Gordon's channels:
http://www.youtube.com/gordonramsay
http://www.youtube.com/thefword
http://www.youtube.com/kitchennightmares
More Gordon Ramsay:
Website: http://www.gordonramsay.com
Facebook: http://www.facebook.com/GordonRamsay01
Twitter: http://www.twitter.com/GordonRamsay
- published: 23 Mar 2016
- views: 5493154
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below:
I've got links to everything you need on my site
http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure
Want to support ILTMS? There are lots of ways .. find out more at
http://www.iliketomakestuff.com/support
BUY A SHIRT, STICKER OR A HANDMADE ITEM!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://facebook.com/iltms
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go.
I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials.
Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below!
Here’s what you’ll need:
(purchasing via these affiliate links supports ILTMS)
Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM
Mold Release Agent - http://amzn.to/1QPrJvS
Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms
Measure your item, then add 1/2″ to each side.
Measure out four strips of plastic or foamcore for the box sides.
Cut the sides out, just make sure the height is well above your object’s height.
Cut a square for the bottom piece of the box.
Hot glue your object in the center of the box bottom.
Hot glue on the walls of your box.
Seal all cracks with hot glue.
I used Oomoo 30 for the mold material.
Mix the parts at a 1-to-1 ratio.
Mix thoroughly, scraping the sides and bottom fully.
Slowly pour into your mold in a thin stream to reduce bubbles.
After it’s cured, remove the box from the mold.
Cut a serpentine pattern on two sides.
When you’ve opened the mold enough, remove your object.
The molds maintain ALL of the tiny details.
Spray the inside of the mold with a release agent.
Using wooden side supports, tape the mold to keep it closed.
Mix your resin. In this case, I used a 1-to-1 mix urethane resin.
Slowly fill the mold, spinning the mold to fill pockets and release air bubbles.
After it fully cures, remove the cast item.
Check out the final result! Second channel: bit.ly/iltms-2
- published: 27 Feb 2015
- views: 710188
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Links:
Exploding Ninja Stars: https://goo.gl/1fdvrO
Pinata Bombing: https://goo.gl/FGSKr4
Coconut Grenades: https://goo.gl/yWvuav
Batarangs: https://goo.gl/ggrtBr
See What Else I’m Up To:
Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Pinterest: http://bit.ly/pingrant
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about
Music by: Bird Passengers - "The Original"
https://itunes.apple.com/us/album/bird-passengers/id1205165567
https://www.youtube.com/birdpassengers
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
- published: 28 Feb 2017
- views: 1255649
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
- published: 12 Feb 2009
- views: 546780
Mold
A mold (US / CA) or mould (UK / NZ / AU / ZA / IN / CA) is a fungus that grows in the form of multicellular filaments called hyphae. In contrast, fungi that can adopt a single-celled growth habit are called yeasts.
Molds are a large and taxonomically diverse number of fungal species where the growth of hyphae results in discoloration and a fuzzy appearance, especially on food. The network of these tubular branching hyphae, called a mycelium, is considered a single organism. The hyphae are generally transparent, so the mycelium appears like very fine, fluffy white threads over the surface. Cross-walls (septa) may delimit connected compartments along the hyphae, each containing one or multiple, genetically identical nuclei. The dusty texture of many molds is caused by profuse production of asexual spores (conidia) formed by differentiation at the ends of hyphae. The mode of formation and shape of these spores is traditionally used to classify molds. Many of these spores are colored, making the fungus much more obvious to the human eye at this stage in its life-cycle.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Mold
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Stachybotrys chartarum
Stachybotrys chartarum, also called Stachybotrys atra, Stachybotrys alternans or Stilbospora chartarum, is a black mold that produces its conidia in slime heads. It is sometimes found in soil and grain, but the mold is most often detected in cellulose-rich building materials from damp or water-damaged buildings.S. chartarum was originally discovered on the wall of a house in Prague in 1837 by Czech mycologist August Carl Joseph Corda. It requires high moisture content in order to grow and is associated with wet gypsum material and wallpaper.
Medical and veterinary issues
Health problems related to this mold have been documented in humans and animals since the 1930s; it is also considered a likely candidate for the Biblical condition mistranslated as "leprosy", tzaraath. More recently, S. chartarum has been linked with so-called sick building syndrome. However, the link has not been firmly established in the scientific literature.
There are two chemotypes in S. chartarum, one that produce trichothecene mycotoxins including satratoxins and one that produce atranones.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Stachybotrys_chartarum
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
2:31Tomato Time-Lapse Mold
Tomato Time-Lapse MoldTomato Time-Lapse Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food music by https://www.youtube.com/user/StormwaveAudio © STORMWAVE Audio - The Beast subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1 © TEMPONAUT - https://www.time-lapse-footage.com -
13:20Black Mold Symptoms & 16 Natural Remedies
Black Mold Symptoms & 16 Natural RemediesBlack Mold Symptoms & 16 Natural Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible. Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more. Subscribe to my channel for more natural health remedies! Facebook: https://www.facebook.com/DrJoshAxe/ Instagram: https://www.instagram.com/drjoshaxe/ Pinterest: https://www.pinterest.com/draxe/ Twitter: https://twitter.com/drjoshaxe --------------------------------------------------------------- Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/ *This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program. -
35:21How to Mold and Cast a Lightsaber!
How to Mold and Cast a Lightsaber!How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam! Video shot and edited by Joey Fameli Music Library provided by Jingle Punks Thanks to Smooth-On for providing materials for this video Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested! -
5:28Infected Rain - Mold (Official Video) 4k 2017
Infected Rain - Mold (Official Video) 4k 2017Infected Rain - Mold (Official Video) 4k 2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain Instagram - https://www.instagram.com/infectedrain_official/ If you liked the song, find it on every internet store. Mold (Single 2017) iTunes http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes Mold is from the album called "86". Find it on iTunes: http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes Physical CD and T-shirts on ebay http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40 Video was directed by Igor Levinsky 2016-2017 Visual Effects made by Vidick Lena Scissorhands (hair and make up artist) Produced by Voluta Valentin and Infected Rain Turntables by DJ Bishop Special thanks to Alexander Ionescu. Bandsintown - https://www.bandsintown.com/InfectedRain Official Page: http://infectedrain.com/ E-mail: infectedrain1@gmail.com -
9:4517 Signs Of Mold illness And How To Tell If You Are At Risk
17 Signs Of Mold illness And How To Tell If You Are At Risk17 Signs Of Mold illness And How To Tell If You Are At Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK Mold is a common issue and it may also be present in your home and be the reason for numerous health issues. However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects. However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons. Yet, these are the most common signs of mold illness: Headache Fatigue, post-exercise malaise, and weakness Memory problems, focusing issues, executive function problems, brain fog Light sensitivity, blurred vision, red eyes Sinus problems, air hunger, cough, shortness of breath, asthma-like signs Vertigo Static “shocks” Weight gain despite sufficient effort (weight loss resistance) Tremors Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain Persistent nerve pain Numbness and tingling Abdominal pain, diarrhea, appetite changes, nausea Night sweats or temperature regulation issues Excessive thirst Increased urination Metallic taste Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades. Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye. Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry. Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months. Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air. Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness. Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence. Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS). Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows: Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “ Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.” Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness. As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR). Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness. Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it. In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response. Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long. The diagnosis of CIRS requires the presence of the following criteria: Abnormalities documented by Visual Co -
5:15Killing Toxic Black Mold - How to Remove Mold Safely
Killing Toxic Black Mold - How to Remove Mold SafelyKilling Toxic Black Mold - How to Remove Mold Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html -
4:14Waitress Confuses Mold with Basil - Kitchen Nightmares
Waitress Confuses Mold with Basil - Kitchen NightmaresWaitress Confuses Mold with Basil - Kitchen Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door... If you liked this clip check out the rest of Gordon's channels: http://www.youtube.com/gordonramsay http://www.youtube.com/thefword http://www.youtube.com/kitchennightmares More Gordon Ramsay: Website: http://www.gordonramsay.com Facebook: http://www.facebook.com/GordonRamsay01 Twitter: http://www.twitter.com/GordonRamsay -
4:55Mold and cast an action figure ( or anything ) // How-To
Mold and cast an action figure ( or anything ) // How-ToMold and cast an action figure ( or anything ) // How-To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below: I've got links to everything you need on my site http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure Want to support ILTMS? There are lots of ways .. find out more at http://www.iliketomakestuff.com/support BUY A SHIRT, STICKER OR A HANDMADE ITEM!! http://www.iliketomakestuff.com/store FOLLOW: http://facebook.com/iltms http://twitter.com/iliketomakestuf http://instagram.com/iliketomakestuff Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go. I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials. Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below! Here’s what you’ll need: (purchasing via these affiliate links supports ILTMS) Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM Mold Release Agent - http://amzn.to/1QPrJvS Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms Measure your item, then add 1/2″ to each side. Measure out four strips of plastic or foamcore for the box sides. Cut the sides out, just make sure the height is well above your object’s height. Cut a square for the bottom piece of the box. Hot glue your object in the center of the box bottom. Hot glue on the walls of your box. Seal all cracks with hot glue. I used Oomoo 30 for the mold material. Mix the parts at a 1-to-1 ratio. Mix thoroughly, scraping the sides and bottom fully. Slowly pour into your mold in a thin stream to reduce bubbles. After it’s cured, remove the box from the mold. Cut a serpentine pattern on two sides. When you’ve opened the mold enough, remove your object. The molds maintain ALL of the tiny details. Spray the inside of the mold with a release agent. Using wooden side supports, tape the mold to keep it closed. Mix your resin. In this case, I used a 1-to-1 mix urethane resin. Slowly fill the mold, spinning the mold to fill pockets and release air bubbles. After it fully cures, remove the cast item. Check out the final result! Second channel: bit.ly/iltms-2 -
9:08Making A Silicone Brain Mold
Making A Silicone Brain MoldMaking A Silicone Brain Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU Vat19 brain: https://goo.gl/HW2RR0 SmoothSil Silicone: http://amzn.to/21k9Eex Endcard Links: Exploding Ninja Stars: https://goo.gl/1fdvrO Pinata Bombing: https://goo.gl/FGSKr4 Coconut Grenades: https://goo.gl/yWvuav Batarangs: https://goo.gl/ggrtBr See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about Music by: Bird Passengers - "The Original" https://itunes.apple.com/us/album/bird-passengers/id1205165567 https://www.youtube.com/birdpassengers WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK. -
4:48Mold Time Lapse
Mold Time LapseMold Time Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium. Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
'Mold' is featured as a movie character in the following productions:
Black Death (2010)
Actors: Andy Nyman (actor), Tim McInnerny (actor), Jens Meurer (producer), Gero Brugmann (miscellaneous crew), David Warner (actor), Martin Hentschel (actor), Sean Bean (actor), Carice van Houten (actress), John Lynch (actor), Christian Henson (composer), Catherine Charlton (miscellaneous crew), Tygo Gernandt (actor), Zoe Simijonovic (miscellaneous crew), Mathias Braun (miscellaneous crew), Tim Haslam (producer),
Plot: Set during the time of the first outbreak of bubonic plague in England, a young monk is tasked with learning the truth about reports of people being brought back to life, a mission that pulls him toward a village ruler who has made a dark pact with evil forces.
Keywords: 1340s, 14th-century, abbey, animal-skull, anti-christianity, arm-cut-off, arm-ripped-off, axe-in-the-head, back-from-the-dead, banditGenres: Action, Drama, Horror, Mystery,
Taglines: In an age of darkness one man will face the ultimate battle against evil. Repent
Quotes:
Bel: [Approaching Mold from another table] Are you shy?::Mold: [Grasps Bel by her hair] I'm ugly and I am Christian. And that is not a good combination in here, hm? Piss off!Osmund: Bring her back, I beg you bring her back!::Langiva: No, I can't. Pray to your god, see what he can do.
Ulric: [Osmund tears open Ulric's shirt to reveal buboes under his armpits] I am Death. Vengeance is mine! God's fury rains down on you!
Hob: [said slowly] There is no God.
Ulric: Yes, this village is without the pestilence... but it is also without God. For this, they will suffer.
Langiva: [Pointing at the crusaders' weapons] These are God's gifts to us. These are his words and these fine men his ambassadors.
[first lines]::Wolfstan: The fumes of the dead are in the air like poison. The plague, more cruel and more pitiless than war, descended upon us. A pestilence, that would leave half of our kingdom dead. Where did it come from? What carried its germ. The priests told us it was God's punishment. For what sin? What commandment must we break that could earn this? No, we knew the truth. This was not God's work, but devilry. Or witchcraft. But our task, to hunt down a demon, was God's cure.
Langiva: Oy, we're not a bad as ya think. We're worse.
Ulric: The woman was already dead, but I freed her. The mob would have held her again and burned her. I spared her suffering. Sometimes that is all you can do.
Osmund: May I ask, how did your husband die?::Langiva: Men like you killed him.::Osmund: Men like me?::Langiva: Men of God.
Mold
ALBUMS
- mullich mulli released: 1995
mullich mulli
Released 1995- add to main playlist Play in Full Screen Intro
- add to main playlist Play in Full Screen Back to London
- add to main playlist Play in Full Screen Stone Grey
- add to main playlist Play in Full Screen Moments
- add to main playlist Play in Full Screen Helpless
- add to main playlist Play in Full Screen Mommy
- add to main playlist Play in Full Screen 9
- add to main playlist Play in Full Screen Drive me Over
- add to main playlist Play in Full Screen Unknow
- add to main playlist Play in Full Screen Whole in One
- add to main playlist Play in Full Screen Tar Cradle
- add to main playlist Play in Full Screen Closing Down
- add to main playlist Play in Full Screen The way I see it
- add to main playlist Play in Full Screen Because
Mold
ALBUMS
- International Punk Rock Box Set released: 2001
International Punk Rock Box Set
Released 2001- add to main playlist Play in Full Screen Up Against Me
- add to main playlist Play in Full Screen 80's Kid
- add to main playlist Play in Full Screen Sluts
- add to main playlist Play in Full Screen You Creep Me Out
- add to main playlist Play in Full Screen Boyfriend Material
- add to main playlist Play in Full Screen Doug
- add to main playlist Play in Full Screen All Wound Up
- add to main playlist Play in Full Screen One Dollar
- add to main playlist Play in Full Screen At the Beach
- add to main playlist Play in Full Screen Don't Let the Deal Go Down
- add to main playlist Play in Full Screen Brand New BMW
- add to main playlist Play in Full Screen Yeah!
- add to main playlist Play in Full Screen Promises & Lies
- add to main playlist Play in Full Screen Cherryass Punk
- add to main playlist Play in Full Screen Ghoulita
- add to main playlist Play in Full Screen Fuckin' Right You're Sick
- add to main playlist Play in Full Screen Am I Supposed to Be Impressed
- add to main playlist Play in Full Screen Fork or Spoon
- add to main playlist Play in Full Screen Quit It
- add to main playlist Play in Full Screen New Poison
- add to main playlist Play in Full Screen Punks and Monks
- add to main playlist Play in Full Screen My Least Favourite Part
- add to main playlist Play in Full Screen Hurt
- add to main playlist Play in Full Screen Ride Out
- add to main playlist Play in Full Screen American Beauty
- add to main playlist Play in Full Screen A Having Party
- add to main playlist Play in Full Screen I Bit William Shatner
Mold
Alchemia
Released 2004- add to main playlist Play in Full Screen Intro
- add to main playlist Play in Full Screen Furia
- add to main playlist Play in Full Screen Dysonans
- add to main playlist Play in Full Screen Jeszcze
- add to main playlist Play in Full Screen Coraz mniej
- add to main playlist Play in Full Screen Moa
- add to main playlist Play in Full Screen Silva
- add to main playlist Play in Full Screen Czarny List
- add to main playlist Play in Full Screen Igła
- add to main playlist Play in Full Screen Tędy
- add to main playlist Play in Full Screen Pozytywny
- add to main playlist Play in Full Screen Po drugiej stronie lustra
- add to main playlist Play in Full Screen Osobliwie
- add to main playlist Play in Full Screen ID
- add to main playlist Play in Full Screen Outro
Mold
Released 2002- add to main playlist Play in Full Screen Gallery
- add to main playlist Play in Full Screen Maskarada
- add to main playlist Play in Full Screen Wszędzie cynamon
- add to main playlist Play in Full Screen Spostrzeżenie
- add to main playlist Play in Full Screen Pragnąc
- add to main playlist Play in Full Screen Sama
- add to main playlist Play in Full Screen E.O.M.
- add to main playlist Play in Full Screen Spór
- add to main playlist Play in Full Screen Cofnąć czas
- add to main playlist Play in Full Screen Fantazmat
- add to main playlist Play in Full Screen Zanim zniknę
- add to main playlist Play in Full Screen Wszędzie cynamon (single version)
-
Tomato Time-Lapse Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food music by https://www.youtube.com/user/StormwaveAudio © STORMWAVE Audio - The Beast subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1 © TEMPONAUT - https://www.time-lapse-footage.com
published: 24 Apr 2016 -
Black Mold Symptoms & 16 Natural Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible. Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn mo...
published: 01 Mar 2017 -
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam! Video shot and edited by Joey Fameli Music Library provided by Jingle Punks Thanks to Smooth-On for providing materials for this video Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
published: 12 Nov 2014 -
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain Instagram - https://www.instagram.com/infectedrain_official/ If you liked the song, find it on every internet store. Mold (Single 2017) iTunes http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes Mold is from the album called "86". Find it on iTunes: http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes Physical CD and T-shirts on ebay http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40 Video was directed by Igor Levinsky 2016-2017 Visual Effects made by Vidick Lena Scissorhands (hair and make up artist) Produced by Voluta Valentin and Infected Rain Turntables by DJ Bishop Special thanks to Alexander Ionescu. Bandsintown - https://www.bandsintown.com/Infected...
published: 01 Jan 2017 -
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK Mold is a common issue and it may also be present in your home and be the reason for numerous health issues. However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects. However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons. Yet, these are the most common signs of mold illness: Headache Fatigue, post-exercise malaise, and weakness Memory problems, focusing issues, executive function problems, brain fog Light sensitivity, blurred vision, red eyes Sinus problems, air hunger, coug...
published: 28 Feb 2017 -
Killing Toxic Black Mold - How to Remove Mold Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
published: 19 Mar 2011 -
Waitress Confuses Mold with Basil - Kitchen Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door... If you liked this clip check out the rest of Gordon's channels: http://www.youtube.com/gordonramsay http://www.youtube.com/thefword http://www.youtube.com/kitchennightmares More Gordon Ramsay: Website: http://www.gordonramsay.com Facebook: http://www.facebook.com/GordonRamsay01 Twitter: http://www.twitter.com/GordonRamsay
published: 23 Mar 2016 -
Mold and cast an action figure ( or anything ) // How-To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below: I've got links to everything you need on my site http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure Want to support ILTMS? There are lots of ways .. find out more at http://www.iliketomakestuff.com/support BUY A SHIRT, STICKER OR A HANDMADE ITEM!! http://www.iliketomakestuff.com/store FOLLOW: http://facebook.com/iltms http://twitter.com/iliketomakestuf http://instagram.com/iliketomakestuff Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which ...
published: 27 Feb 2015 -
Making A Silicone Brain Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU Vat19 brain: https://goo.gl/HW2RR0 SmoothSil Silicone: http://amzn.to/21k9Eex Endcard Links: Exploding Ninja Stars: https://goo.gl/1fdvrO Pinata Bombing: https://goo.gl/FGSKr4 Coconut Grenades: https://goo.gl/yWvuav Batarangs: https://goo.gl/ggrtBr See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about Music by: Bird Passengers - "The Original" https://itunes.apple.com/us/album/bird-passengers/id1205165567 https://www.youtube.com/birdpassengers WARNING: This video is only for entertainment pur...
published: 28 Feb 2017 -
Mold Time Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium. Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
published: 12 Feb 2009
Tomato Time-Lapse Mold
- Order: Reorder
- Duration: 2:31
- Updated: 24 Apr 2016
- views: 52456
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold...
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato
More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food
music by https://www.youtube.com/user/StormwaveAudio
© STORMWAVE Audio - The Beast
subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1
© TEMPONAUT - https://www.time-lapse-footage.com
https://wn.com/Tomato_Time_Lapse_Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato
More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food
music by https://www.youtube.com/user/StormwaveAudio
© STORMWAVE Audio - The Beast
subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1
© TEMPONAUT - https://www.time-lapse-footage.com
- published: 24 Apr 2016
- views: 52456
Black Mold Symptoms & 16 Natural Remedies
- Order: Reorder
- Duration: 13:20
- Updated: 01 Mar 2017
- views: 71279
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=y...
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold
Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible.
Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more.
Subscribe to my channel for more natural health remedies!
Facebook: https://www.facebook.com/DrJoshAxe/
Instagram: https://www.instagram.com/drjoshaxe/
Pinterest: https://www.pinterest.com/draxe/
Twitter: https://twitter.com/drjoshaxe
---------------------------------------------------------------
Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/
*This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.
https://wn.com/Black_Mold_Symptoms_16_Natural_Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold
Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible.
Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more.
Subscribe to my channel for more natural health remedies!
Facebook: https://www.facebook.com/DrJoshAxe/
Instagram: https://www.instagram.com/drjoshaxe/
Pinterest: https://www.pinterest.com/draxe/
Twitter: https://twitter.com/drjoshaxe
---------------------------------------------------------------
Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/
*This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.
- published: 01 Mar 2017
- views: 71279
How to Mold and Cast a Lightsaber!
- Order: Reorder
- Duration: 35:21
- Updated: 12 Nov 2014
- views: 22188846
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested....
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
https://wn.com/How_To_Mold_And_Cast_A_Lightsaber
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
- published: 12 Nov 2014
- views: 22188846
Infected Rain - Mold (Official Video) 4k 2017
- Order: Reorder
- Duration: 5:28
- Updated: 01 Jan 2017
- views: 775343
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on...
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on every internet store.
Mold (Single 2017)
iTunes
http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes
Mold is from the album called "86". Find it on iTunes:
http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes
Physical CD and T-shirts on ebay
http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40
Video was directed by Igor Levinsky 2016-2017
Visual Effects made by Vidick
Lena Scissorhands (hair and make up artist)
Produced by Voluta Valentin and Infected Rain
Turntables by DJ Bishop
Special thanks to Alexander Ionescu.
Bandsintown - https://www.bandsintown.com/InfectedRain
Official Page: http://infectedrain.com/
E-mail: infectedrain1@gmail.com
https://wn.com/Infected_Rain_Mold_(Official_Video)_4K_2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on every internet store.
Mold (Single 2017)
iTunes
http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes
Mold is from the album called "86". Find it on iTunes:
http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes
Physical CD and T-shirts on ebay
http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40
Video was directed by Igor Levinsky 2016-2017
Visual Effects made by Vidick
Lena Scissorhands (hair and make up artist)
Produced by Voluta Valentin and Infected Rain
Turntables by DJ Bishop
Special thanks to Alexander Ionescu.
Bandsintown - https://www.bandsintown.com/InfectedRain
Official Page: http://infectedrain.com/
E-mail: infectedrain1@gmail.com
- published: 01 Jan 2017
- views: 775343
17 Signs Of Mold illness And How To Tell If You Are At Risk
- Order: Reorder
- Duration: 9:45
- Updated: 28 Feb 2017
- views: 7735
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health ...
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health issues.
However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects.
However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons.
Yet, these are the most common signs of mold illness:
Headache
Fatigue, post-exercise malaise, and weakness
Memory problems, focusing issues, executive function problems, brain fog
Light sensitivity, blurred vision, red eyes
Sinus problems, air hunger, cough, shortness of breath, asthma-like signs
Vertigo
Static “shocks”
Weight gain despite sufficient effort (weight loss resistance)
Tremors
Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain
Persistent nerve pain
Numbness and tingling
Abdominal pain, diarrhea, appetite changes, nausea
Night sweats or temperature regulation issues
Excessive thirst
Increased urination
Metallic taste
Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades.
Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye.
Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry.
Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months.
Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air.
Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness.
Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence.
Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS).
Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows:
Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “
Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.”
Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness.
As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR).
Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness.
Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it.
In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response.
Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long.
The diagnosis of CIRS requires the presence of the following criteria:
Abnormalities documented by Visual Co
https://wn.com/17_Signs_Of_Mold_Illness_And_How_To_Tell_If_You_Are_At_Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health issues.
However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects.
However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons.
Yet, these are the most common signs of mold illness:
Headache
Fatigue, post-exercise malaise, and weakness
Memory problems, focusing issues, executive function problems, brain fog
Light sensitivity, blurred vision, red eyes
Sinus problems, air hunger, cough, shortness of breath, asthma-like signs
Vertigo
Static “shocks”
Weight gain despite sufficient effort (weight loss resistance)
Tremors
Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain
Persistent nerve pain
Numbness and tingling
Abdominal pain, diarrhea, appetite changes, nausea
Night sweats or temperature regulation issues
Excessive thirst
Increased urination
Metallic taste
Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades.
Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye.
Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry.
Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months.
Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air.
Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness.
Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence.
Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS).
Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows:
Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “
Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.”
Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness.
As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR).
Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness.
Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it.
In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response.
Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long.
The diagnosis of CIRS requires the presence of the following criteria:
Abnormalities documented by Visual Co
- published: 28 Feb 2017
- views: 7735
Killing Toxic Black Mold - How to Remove Mold Safely
- Order: Reorder
- Duration: 5:15
- Updated: 19 Mar 2011
- views: 1153306
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing larg...
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
https://wn.com/Killing_Toxic_Black_Mold_How_To_Remove_Mold_Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
- published: 19 Mar 2011
- views: 1153306
Waitress Confuses Mold with Basil - Kitchen Nightmares
- Order: Reorder
- Duration: 4:14
- Updated: 23 Mar 2016
- views: 5493154
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door....
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door...
If you liked this clip check out the rest of Gordon's channels:
http://www.youtube.com/gordonramsay
http://www.youtube.com/thefword
http://www.youtube.com/kitchennightmares
More Gordon Ramsay:
Website: http://www.gordonramsay.com
Facebook: http://www.facebook.com/GordonRamsay01
Twitter: http://www.twitter.com/GordonRamsay
https://wn.com/Waitress_Confuses_Mold_With_Basil_Kitchen_Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door...
If you liked this clip check out the rest of Gordon's channels:
http://www.youtube.com/gordonramsay
http://www.youtube.com/thefword
http://www.youtube.com/kitchennightmares
More Gordon Ramsay:
Website: http://www.gordonramsay.com
Facebook: http://www.facebook.com/GordonRamsay01
Twitter: http://www.twitter.com/GordonRamsay
- published: 23 Mar 2016
- views: 5493154
Mold and cast an action figure ( or anything ) // How-To
- Order: Reorder
- Duration: 4:55
- Updated: 27 Feb 2015
- views: 710188
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inv...
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below:
I've got links to everything you need on my site
http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure
Want to support ILTMS? There are lots of ways .. find out more at
http://www.iliketomakestuff.com/support
BUY A SHIRT, STICKER OR A HANDMADE ITEM!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://facebook.com/iltms
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go.
I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials.
Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below!
Here’s what you’ll need:
(purchasing via these affiliate links supports ILTMS)
Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM
Mold Release Agent - http://amzn.to/1QPrJvS
Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms
Measure your item, then add 1/2″ to each side.
Measure out four strips of plastic or foamcore for the box sides.
Cut the sides out, just make sure the height is well above your object’s height.
Cut a square for the bottom piece of the box.
Hot glue your object in the center of the box bottom.
Hot glue on the walls of your box.
Seal all cracks with hot glue.
I used Oomoo 30 for the mold material.
Mix the parts at a 1-to-1 ratio.
Mix thoroughly, scraping the sides and bottom fully.
Slowly pour into your mold in a thin stream to reduce bubbles.
After it’s cured, remove the box from the mold.
Cut a serpentine pattern on two sides.
When you’ve opened the mold enough, remove your object.
The molds maintain ALL of the tiny details.
Spray the inside of the mold with a release agent.
Using wooden side supports, tape the mold to keep it closed.
Mix your resin. In this case, I used a 1-to-1 mix urethane resin.
Slowly fill the mold, spinning the mold to fill pockets and release air bubbles.
After it fully cures, remove the cast item.
Check out the final result! Second channel: bit.ly/iltms-2
https://wn.com/Mold_And_Cast_An_Action_Figure_(_Or_Anything_)_How_To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below:
I've got links to everything you need on my site
http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure
Want to support ILTMS? There are lots of ways .. find out more at
http://www.iliketomakestuff.com/support
BUY A SHIRT, STICKER OR A HANDMADE ITEM!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://facebook.com/iltms
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go.
I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials.
Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below!
Here’s what you’ll need:
(purchasing via these affiliate links supports ILTMS)
Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM
Mold Release Agent - http://amzn.to/1QPrJvS
Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms
Measure your item, then add 1/2″ to each side.
Measure out four strips of plastic or foamcore for the box sides.
Cut the sides out, just make sure the height is well above your object’s height.
Cut a square for the bottom piece of the box.
Hot glue your object in the center of the box bottom.
Hot glue on the walls of your box.
Seal all cracks with hot glue.
I used Oomoo 30 for the mold material.
Mix the parts at a 1-to-1 ratio.
Mix thoroughly, scraping the sides and bottom fully.
Slowly pour into your mold in a thin stream to reduce bubbles.
After it’s cured, remove the box from the mold.
Cut a serpentine pattern on two sides.
When you’ve opened the mold enough, remove your object.
The molds maintain ALL of the tiny details.
Spray the inside of the mold with a release agent.
Using wooden side supports, tape the mold to keep it closed.
Mix your resin. In this case, I used a 1-to-1 mix urethane resin.
Slowly fill the mold, spinning the mold to fill pockets and release air bubbles.
After it fully cures, remove the cast item.
Check out the final result! Second channel: bit.ly/iltms-2
- published: 27 Feb 2015
- views: 710188
Making A Silicone Brain Mold
- Order: Reorder
- Duration: 9:08
- Updated: 28 Feb 2017
- views: 1255649
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Lin...
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Links:
Exploding Ninja Stars: https://goo.gl/1fdvrO
Pinata Bombing: https://goo.gl/FGSKr4
Coconut Grenades: https://goo.gl/yWvuav
Batarangs: https://goo.gl/ggrtBr
See What Else I’m Up To:
Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Pinterest: http://bit.ly/pingrant
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about
Music by: Bird Passengers - "The Original"
https://itunes.apple.com/us/album/bird-passengers/id1205165567
https://www.youtube.com/birdpassengers
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
https://wn.com/Making_A_Silicone_Brain_Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Links:
Exploding Ninja Stars: https://goo.gl/1fdvrO
Pinata Bombing: https://goo.gl/FGSKr4
Coconut Grenades: https://goo.gl/yWvuav
Batarangs: https://goo.gl/ggrtBr
See What Else I’m Up To:
Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Pinterest: http://bit.ly/pingrant
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about
Music by: Bird Passengers - "The Original"
https://itunes.apple.com/us/album/bird-passengers/id1205165567
https://www.youtube.com/birdpassengers
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
- published: 28 Feb 2017
- views: 1255649
Mold Time Lapse
- Order: Reorder
- Duration: 4:48
- Updated: 12 Feb 2009
- views: 546780
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, De...
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
https://wn.com/Mold_Time_Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
- published: 12 Feb 2009
- views: 546780
-
Tomato Time-Lapse Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food music by https://www.youtube.com/user/StormwaveAudio © STORMWAVE Audio - The Beast subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1 © TEMPONAUT - https://www.time-lapse-footage.com
published: 24 Apr 2016 -
Black Mold Symptoms & 16 Natural Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible. Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn mo...
published: 01 Mar 2017 -
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam! Video shot and edited by Joey Fameli Music Library provided by Jingle Punks Thanks to Smooth-On for providing materials for this video Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
published: 12 Nov 2014 -
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain Instagram - https://www.instagram.com/infectedrain_official/ If you liked the song, find it on every internet store. Mold (Single 2017) iTunes http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes Mold is from the album called "86". Find it on iTunes: http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes Physical CD and T-shirts on ebay http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40 Video was directed by Igor Levinsky 2016-2017 Visual Effects made by Vidick Lena Scissorhands (hair and make up artist) Produced by Voluta Valentin and Infected Rain Turntables by DJ Bishop Special thanks to Alexander Ionescu. Bandsintown - https://www.bandsintown.com/Infected...
published: 01 Jan 2017 -
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK Mold is a common issue and it may also be present in your home and be the reason for numerous health issues. However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects. However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons. Yet, these are the most common signs of mold illness: Headache Fatigue, post-exercise malaise, and weakness Memory problems, focusing issues, executive function problems, brain fog Light sensitivity, blurred vision, red eyes Sinus problems, air hunger, coug...
published: 28 Feb 2017 -
Killing Toxic Black Mold - How to Remove Mold Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
published: 19 Mar 2011 -
Waitress Confuses Mold with Basil - Kitchen Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door... If you liked this clip check out the rest of Gordon's channels: http://www.youtube.com/gordonramsay http://www.youtube.com/thefword http://www.youtube.com/kitchennightmares More Gordon Ramsay: Website: http://www.gordonramsay.com Facebook: http://www.facebook.com/GordonRamsay01 Twitter: http://www.twitter.com/GordonRamsay
published: 23 Mar 2016 -
Mold and cast an action figure ( or anything ) // How-To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below: I've got links to everything you need on my site http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure Want to support ILTMS? There are lots of ways .. find out more at http://www.iliketomakestuff.com/support BUY A SHIRT, STICKER OR A HANDMADE ITEM!! http://www.iliketomakestuff.com/store FOLLOW: http://facebook.com/iltms http://twitter.com/iliketomakestuf http://instagram.com/iliketomakestuff Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which ...
published: 27 Feb 2015 -
Making A Silicone Brain Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU Vat19 brain: https://goo.gl/HW2RR0 SmoothSil Silicone: http://amzn.to/21k9Eex Endcard Links: Exploding Ninja Stars: https://goo.gl/1fdvrO Pinata Bombing: https://goo.gl/FGSKr4 Coconut Grenades: https://goo.gl/yWvuav Batarangs: https://goo.gl/ggrtBr See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about Music by: Bird Passengers - "The Original" https://itunes.apple.com/us/album/bird-passengers/id1205165567 https://www.youtube.com/birdpassengers WARNING: This video is only for entertainment pur...
published: 28 Feb 2017 -
Mold Time Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium. Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
published: 12 Feb 2009
Tomato Time-Lapse Mold
- Order: Reorder
- Duration: 2:31
- Updated: 24 Apr 2016
- views: 52456
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold...
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato
More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food
music by https://www.youtube.com/user/StormwaveAudio
© STORMWAVE Audio - The Beast
subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1
© TEMPONAUT - https://www.time-lapse-footage.com
https://wn.com/Tomato_Time_Lapse_Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at https://www.time-lapse-footage.com/video-clip-1019/timelapse-clip-mold-timelapse-tomato
More rotting food and fruit mold timelapse at https://www.time-lapse-footage.com/stock-footage-clips/videos-fruits-and-food
music by https://www.youtube.com/user/StormwaveAudio
© STORMWAVE Audio - The Beast
subscribe to TEMPONAUT http://www.youtube.com/user/TEMP0NAUT?sub_confirmation=1
© TEMPONAUT - https://www.time-lapse-footage.com
- published: 24 Apr 2016
- views: 52456
Black Mold Symptoms & 16 Natural Remedies
- Order: Reorder
- Duration: 13:20
- Updated: 01 Mar 2017
- views: 71279
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=y...
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold
Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible.
Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more.
Subscribe to my channel for more natural health remedies!
Facebook: https://www.facebook.com/DrJoshAxe/
Instagram: https://www.instagram.com/drjoshaxe/
Pinterest: https://www.pinterest.com/draxe/
Twitter: https://twitter.com/drjoshaxe
---------------------------------------------------------------
Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/
*This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.
https://wn.com/Black_Mold_Symptoms_16_Natural_Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mold-symptoms/?utm_campaign=Live-Mar-2017&utm;_medium=social&utm;_source=youtube&utm;_term=blackmold
Black mold is easily distinguishable from other molds because, not surprisingly, it tends to be dark black. Black mold is most likely to rear its ugly head in areas of the home that are warm, humid and damp. In addition to showers, basements and crawlspaces that may have leaks are commonly susceptible.
Black mold exposure and black mold poisoning can cause a wide range of health problems. Some symptoms can be really serious. In this episode of Ancient Medicine Today, I’m sharing how by cleansing your body and making changes in your home, you can overcome and prevent black mold symptoms. Watch to learn more.
Subscribe to my channel for more natural health remedies!
Facebook: https://www.facebook.com/DrJoshAxe/
Instagram: https://www.instagram.com/drjoshaxe/
Pinterest: https://www.pinterest.com/draxe/
Twitter: https://twitter.com/drjoshaxe
---------------------------------------------------------------
Want more? Sign up to get the Dr. Axe Food Is Medicine e-newsletter, sent out a few times a week: https://draxe.com/subscribe-to-newsletter/
*This content is strictly the opinion of Dr. Josh Axe, and is for informational and educational purposes only. It is not intended to provide medical advice or to take the place of medical advice or treatment from a personal physician. All viewers of this content are advised to consult their doctors or qualified health professionals regarding specific health questions. Neither Dr. Axe nor the publisher of this content takes responsibility for possible health consequences of any person or persons reading or following the information in this educational content. All viewers of this content, especially those taking prescription or over-the-counter medications, should consult their physicians before beginning any nutrition, supplement or lifestyle program.
- published: 01 Mar 2017
- views: 71279
How to Mold and Cast a Lightsaber!
- Order: Reorder
- Duration: 35:21
- Updated: 12 Nov 2014
- views: 22188846
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested....
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
https://wn.com/How_To_Mold_And_Cast_A_Lightsaber
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
- published: 12 Nov 2014
- views: 22188846
Infected Rain - Mold (Official Video) 4k 2017
- Order: Reorder
- Duration: 5:28
- Updated: 01 Jan 2017
- views: 775343
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on...
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on every internet store.
Mold (Single 2017)
iTunes
http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes
Mold is from the album called "86". Find it on iTunes:
http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes
Physical CD and T-shirts on ebay
http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40
Video was directed by Igor Levinsky 2016-2017
Visual Effects made by Vidick
Lena Scissorhands (hair and make up artist)
Produced by Voluta Valentin and Infected Rain
Turntables by DJ Bishop
Special thanks to Alexander Ionescu.
Bandsintown - https://www.bandsintown.com/InfectedRain
Official Page: http://infectedrain.com/
E-mail: infectedrain1@gmail.com
https://wn.com/Infected_Rain_Mold_(Official_Video)_4K_2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.instagram.com/infectedrain_official/
If you liked the song, find it on every internet store.
Mold (Single 2017)
iTunes
http://itunes.apple.com/album/id1186406004?ls=1&app;=itunes
Mold is from the album called "86". Find it on iTunes:
http://itunes.apple.com/album/id1218093716?ls=1&app;=itunes
Physical CD and T-shirts on ebay
http://www.ebay.com/sch/i.html?_nkw=infected+rain&_sacat=0&_odkw=infected+rain&_osacat=0&_from=R40
Video was directed by Igor Levinsky 2016-2017
Visual Effects made by Vidick
Lena Scissorhands (hair and make up artist)
Produced by Voluta Valentin and Infected Rain
Turntables by DJ Bishop
Special thanks to Alexander Ionescu.
Bandsintown - https://www.bandsintown.com/InfectedRain
Official Page: http://infectedrain.com/
E-mail: infectedrain1@gmail.com
- published: 01 Jan 2017
- views: 775343
17 Signs Of Mold illness And How To Tell If You Are At Risk
- Order: Reorder
- Duration: 9:45
- Updated: 28 Feb 2017
- views: 7735
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health ...
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health issues.
However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects.
However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons.
Yet, these are the most common signs of mold illness:
Headache
Fatigue, post-exercise malaise, and weakness
Memory problems, focusing issues, executive function problems, brain fog
Light sensitivity, blurred vision, red eyes
Sinus problems, air hunger, cough, shortness of breath, asthma-like signs
Vertigo
Static “shocks”
Weight gain despite sufficient effort (weight loss resistance)
Tremors
Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain
Persistent nerve pain
Numbness and tingling
Abdominal pain, diarrhea, appetite changes, nausea
Night sweats or temperature regulation issues
Excessive thirst
Increased urination
Metallic taste
Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades.
Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye.
Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry.
Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months.
Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air.
Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness.
Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence.
Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS).
Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows:
Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “
Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.”
Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness.
As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR).
Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness.
Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it.
In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response.
Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long.
The diagnosis of CIRS requires the presence of the following criteria:
Abnormalities documented by Visual Co
https://wn.com/17_Signs_Of_Mold_Illness_And_How_To_Tell_If_You_Are_At_Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it may also be present in your home and be the reason for numerous health issues.
However, you need to know its symptoms and who are most prone to it, in order to treat the issue and avoid adverse effects.
However, according to the conventional medicine, it is not a problem, and it, therefore, offers no proper treatment. Moreover, its symptoms are similar to the ones of other ailments, as they are nonspecific, and often attributed to other reasons.
Yet, these are the most common signs of mold illness:
Headache
Fatigue, post-exercise malaise, and weakness
Memory problems, focusing issues, executive function problems, brain fog
Light sensitivity, blurred vision, red eyes
Sinus problems, air hunger, cough, shortness of breath, asthma-like signs
Vertigo
Static “shocks”
Weight gain despite sufficient effort (weight loss resistance)
Tremors
Muscle cramps, constant nerve pain, pain in the joints, aches without inflammatory arthritis, “ice pick” pain
Persistent nerve pain
Numbness and tingling
Abdominal pain, diarrhea, appetite changes, nausea
Night sweats or temperature regulation issues
Excessive thirst
Increased urination
Metallic taste
Regarding these symptoms, you can easily see why they are often confused with other diseases’ signs. Yet, the disastrous effects of mold have been scientifically studies for more than three decades.
Namely, the mold is actually a combination of numerous types of fungi that grow in filaments and reproduce by creating tiny spores that sprout and fly away, and cannot be spotted by the naked eye.
Mold thrives in warm, damp, and humid places. It may also appear, for instance, in Nevada and Arizona, in places with poor ventilation, floods, or water leaks, even if they are dry.
Mold can appear in the showerhead, bathroom, poor ventilated rooms, it can attach to the furniture, books, pets, shoes, carpets, and papers. It is able to circulate in the air system as well. Therefore, it is advisable that you change HVAC filters on three months.
Water-damaged buildings lead to the formation of a complex combination of contaminants present in the air and dust, creating a toxic chemical mixture. Also, mold forms toxic ingredients known as mycotoxins, which remain on spores and fragments of mold released into the air.
Yet, note that mold illness is not caused by a single toxin, but the cause is more due to the water-damaged area or building itself. The newest review also found sinuses to be a common reason for persistent mold illness.
Unfortunately, the reality is that half of the buildings we live in are water damaged, causing mold and mold illnesses to the ones which are more prone to it. Considering the fact that most of us spend a lot of time indoors, in our offices, or at home, we should all learn how to reduce these harmful influence.
Namely, mold toxicity is classified in the big category of biotoxin illness, or Chronic Inflammatory Response Syndrome (CIRS).
Ritchie Shoemaker, MD, the author of 8 books on this issue, including Surviving Mold: Life in the Era of Dangerous Buildings, defines CIRS as follows:
Chronic Inflammatory Response Syndrome (CIRS) is “an acute and chronic, systemic inflammatory response acquired following exposure to the interior environment of a water-damaged building with resident toxigenic organisms, including, but not limited to fungi, bacteria, actinomycetes, and mycobacterium as well as inflammagens . . . . “
Dr. Shoemaker also comments that: “24 percent of people cannot make adequate antibody responses, and they’re the ones that comprise over 95 percent of people who have an illness from water-damaged buildings.”
Hence, we will now explain the role of DNA and its impact on the susceptibility to mold illness.
As stated by Dr. Shoemaker as well, around 24 percent of the population is genetically susceptible to mold toxicity, as they have an immune response gene (HLA-DR).
Therefore, people with these genes have an increased risk of mold illness. This subgroup includes 95% of mold illness.
Also, there is 2 percent more who are especially prone to it and have a “sicker quicker” variation of these genes. What’s more, if you are not vulnerable to mold illness, it still does not mean that you have zero chances to suffer from it.
In the case of mold vulnerability, people cannot recognize specific toxins as toxins, like mold, and they get recirculated in the body. Consequently, toxins lead to a continuing inflammatory response.
Mold illness from water-damaged buildings is a severe health issue, as it is a state of chronic inflammation due to a weakened immune system, and it does not heal on its own, provoking various illnesses if left untreated. The illness is built into the DNA and as soon as it is activated, symptoms and the inflammatory response may long.
The diagnosis of CIRS requires the presence of the following criteria:
Abnormalities documented by Visual Co
- published: 28 Feb 2017
- views: 7735
Killing Toxic Black Mold - How to Remove Mold Safely
- Order: Reorder
- Duration: 5:15
- Updated: 19 Mar 2011
- views: 1153306
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing larg...
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
https://wn.com/Killing_Toxic_Black_Mold_How_To_Remove_Mold_Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might think. Just be safe and take the necessary precautions when removing large areas of mold. In this video you'll learn how to remove mold according to the most of the EPA recommendations. The complete EPA Guide to Mold Removal is available at http://www.epa.gov/mold/moldguide.html
- published: 19 Mar 2011
- views: 1153306
Waitress Confuses Mold with Basil - Kitchen Nightmares
- Order: Reorder
- Duration: 4:14
- Updated: 23 Mar 2016
- views: 5493154
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door....
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door...
If you liked this clip check out the rest of Gordon's channels:
http://www.youtube.com/gordonramsay
http://www.youtube.com/thefword
http://www.youtube.com/kitchennightmares
More Gordon Ramsay:
Website: http://www.gordonramsay.com
Facebook: http://www.facebook.com/GordonRamsay01
Twitter: http://www.twitter.com/GordonRamsay
https://wn.com/Waitress_Confuses_Mold_With_Basil_Kitchen_Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference between mold and basil. Gordon has had enough, especially with that door...
If you liked this clip check out the rest of Gordon's channels:
http://www.youtube.com/gordonramsay
http://www.youtube.com/thefword
http://www.youtube.com/kitchennightmares
More Gordon Ramsay:
Website: http://www.gordonramsay.com
Facebook: http://www.facebook.com/GordonRamsay01
Twitter: http://www.twitter.com/GordonRamsay
- published: 23 Mar 2016
- views: 5493154
Mold and cast an action figure ( or anything ) // How-To
- Order: Reorder
- Duration: 4:55
- Updated: 27 Feb 2015
- views: 710188
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inv...
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below:
I've got links to everything you need on my site
http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure
Want to support ILTMS? There are lots of ways .. find out more at
http://www.iliketomakestuff.com/support
BUY A SHIRT, STICKER OR A HANDMADE ITEM!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://facebook.com/iltms
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go.
I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials.
Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below!
Here’s what you’ll need:
(purchasing via these affiliate links supports ILTMS)
Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM
Mold Release Agent - http://amzn.to/1QPrJvS
Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms
Measure your item, then add 1/2″ to each side.
Measure out four strips of plastic or foamcore for the box sides.
Cut the sides out, just make sure the height is well above your object’s height.
Cut a square for the bottom piece of the box.
Hot glue your object in the center of the box bottom.
Hot glue on the walls of your box.
Seal all cracks with hot glue.
I used Oomoo 30 for the mold material.
Mix the parts at a 1-to-1 ratio.
Mix thoroughly, scraping the sides and bottom fully.
Slowly pour into your mold in a thin stream to reduce bubbles.
After it’s cured, remove the box from the mold.
Cut a serpentine pattern on two sides.
When you’ve opened the mold enough, remove your object.
The molds maintain ALL of the tiny details.
Spray the inside of the mold with a release agent.
Using wooden side supports, tape the mold to keep it closed.
Mix your resin. In this case, I used a 1-to-1 mix urethane resin.
Slowly fill the mold, spinning the mold to fill pockets and release air bubbles.
After it fully cures, remove the cast item.
Check out the final result! Second channel: bit.ly/iltms-2
https://wn.com/Mold_And_Cast_An_Action_Figure_(_Or_Anything_)_How_To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy in resin, wax and lots more. I got all of my molding supplies from Inventables.com, links below:
I've got links to everything you need on my site
http://www.iliketomakestuff.com/how-to-mold-and-cast-an-action-figure
Want to support ILTMS? There are lots of ways .. find out more at
http://www.iliketomakestuff.com/support
BUY A SHIRT, STICKER OR A HANDMADE ITEM!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://facebook.com/iltms
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
Mold making is yet another thing I’ve had tons of interest in for a long time, but have never really done much of it. The one occasion that I tried it out was to make some climbing holds, which worked surprisingly well, actually. I was able to find everything I needed at inventables.com so I decided to give it a go.
I was surprised at how well it worked on the first try. Although the mold wasn’t perfect, and the cast wasn’t either, they were both really close.. and for my purposes, good enough. Having done some research, I found that having a vacuum chamber (I have to see if I can make one of THOSE) is hugely beneficial for removing the air bubbles from both the molding and casting materials.
Check out my process below, and if you have more experience with silicone molds, please leave some tips and tricks in the comments below!
Here’s what you’ll need:
(purchasing via these affiliate links supports ILTMS)
Oomoo 30 silicone rubber - http://amzn.to/1VuTwTM
Mold Release Agent - http://amzn.to/1QPrJvS
Color matching resin - https://www.inventables.com/technologies/color-matching-molding-resin?ref=iltms
Measure your item, then add 1/2″ to each side.
Measure out four strips of plastic or foamcore for the box sides.
Cut the sides out, just make sure the height is well above your object’s height.
Cut a square for the bottom piece of the box.
Hot glue your object in the center of the box bottom.
Hot glue on the walls of your box.
Seal all cracks with hot glue.
I used Oomoo 30 for the mold material.
Mix the parts at a 1-to-1 ratio.
Mix thoroughly, scraping the sides and bottom fully.
Slowly pour into your mold in a thin stream to reduce bubbles.
After it’s cured, remove the box from the mold.
Cut a serpentine pattern on two sides.
When you’ve opened the mold enough, remove your object.
The molds maintain ALL of the tiny details.
Spray the inside of the mold with a release agent.
Using wooden side supports, tape the mold to keep it closed.
Mix your resin. In this case, I used a 1-to-1 mix urethane resin.
Slowly fill the mold, spinning the mold to fill pockets and release air bubbles.
After it fully cures, remove the cast item.
Check out the final result! Second channel: bit.ly/iltms-2
- published: 27 Feb 2015
- views: 710188
Making A Silicone Brain Mold
- Order: Reorder
- Duration: 9:08
- Updated: 28 Feb 2017
- views: 1255649
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Lin...
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Links:
Exploding Ninja Stars: https://goo.gl/1fdvrO
Pinata Bombing: https://goo.gl/FGSKr4
Coconut Grenades: https://goo.gl/yWvuav
Batarangs: https://goo.gl/ggrtBr
See What Else I’m Up To:
Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Pinterest: http://bit.ly/pingrant
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about
Music by: Bird Passengers - "The Original"
https://itunes.apple.com/us/album/bird-passengers/id1205165567
https://www.youtube.com/birdpassengers
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
https://wn.com/Making_A_Silicone_Brain_Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https://goo.gl/HW2RR0
SmoothSil Silicone: http://amzn.to/21k9Eex
Endcard Links:
Exploding Ninja Stars: https://goo.gl/1fdvrO
Pinata Bombing: https://goo.gl/FGSKr4
Coconut Grenades: https://goo.gl/yWvuav
Batarangs: https://goo.gl/ggrtBr
See What Else I’m Up To:
Instagram: https://goo.gl/C0Q1YU
Facebook: http://bit.ly/FBTheKingOfRandom
Pinterest: http://bit.ly/pingrant
Business Inquiries: For sponsorship requests or business opportunities please contact me directly: https://www.youtube.com/thekingofrandom/about
Music by: Bird Passengers - "The Original"
https://itunes.apple.com/us/album/bird-passengers/id1205165567
https://www.youtube.com/birdpassengers
WARNING:
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
- published: 28 Feb 2017
- views: 1255649
Mold Time Lapse
- Order: Reorder
- Duration: 4:48
- Updated: 12 Feb 2009
- views: 546780
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, De...
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
https://wn.com/Mold_Time_Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on growing mold - Ivanova Anna E. (Lomonosov Moscow State University, Department of Soil Science)
- published: 12 Feb 2009
- views: 546780
-
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam! Video shot and edited by Joey Fameli Music Library provided by Jingle Punks Thanks to Smooth-On for providing materials for this video Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
published: 12 Nov 2014 -
Mold Toxins Making You Fatigued & Sick?
Mold expert, Keith Berndtson, MD shares tips about treating and preventing mold toxicity. ➢ http://highintensityhealth.com/mold-toxicity-zaps-energy-causes-brain-fog/ -----------------------------------------Lets Connect-------------------------------------- ➢ Facebook https://www.facebook.com/MikeMutzelMS ➢ Listen to the Audio in iTunes: http://highintensityhealth.com/itunes ➢ Instagram https://www.instagram.com/metabolic_mike --------------------------------------Key Takeaways---------------------------------- Dr. Keith Berndtson: Now there’s a great need to do it. People often want to know how I got into this. And back in 2007 when I opened this practice, a patient walked in with this book called “Mold Warriors” by some guy named Ritchie Shoemaker. And you know, I finally got...
published: 09 Feb 2015 -
Seamless Silicone Mold With Mother Mold
In this tutorial we explain the process of making a 1 piece, seamless bust mold with a resin support shell or "mother mold." For the silicone mold, we used PlatSil Gel-10 to create a soft, stretchy mold that will pull off of our pattern like a sock. For the support shell, we made a 2 piece resin mother mold using our 1512X resin thickened with PolyFiber. Gel-10 is available here: https://www.brickintheyard.com/collections/platsil-gels Additives such as release, pigment and thickener are here: https://www.brickintheyard.com/collections/silicone-additives-accessories You can find our 1512X resin here: https://www.brickintheyard.com/collections/casting-resin Resin additives are here: https://www.brickintheyard.com/collections/urethane-additives
published: 17 Jan 2017 -
Machining a DIY Injection Mold! WW114
Using Fusion 360 & a Tormach 440 to machine a DIY Injection Mold for X39 Brick Customs! SMW Lego Man: http://bit.ly/SMWLego Schaller Bins: http://ebay.to/29SJyPk Noga Base: http://amzn.to/2cLbzup Mitutoyo DTI: http://amzn.to/2dl9x35 Fusion CAD/CAM File (Patreon): http://bit.ly/2e0nMeR Subscribe For More: http://bit.ly/22CjJoK Follow on Twitter: http://bit.ly/1RdwzGe Facebook: http://bit.ly/1UhX4gu Instagram: http://bit.ly/1MzIpVR Patreon: http://bit.ly/NYCpatreon Music copyrighted by John Saunders
published: 05 Oct 2016 -
Natures Great Decomposers | Molds and Fungus Documentary - NatGeo TV
Molds are a large and taxonomically diverse number of fungal species where the growth of hyphae results in discoloration and a fuzzy appearance, especially on food. The network of these tubular branching hyphae, called a mycelium, is considered a single organism. The hyphae are generally transparent, so the mycelium appears like very fine, fluffy white threads over the surface. Cross-walls (septa) may delimit connected compartments along the hyphae, each containing one or multiple, genetically identical nuclei. The dusty texture of many molds is caused by profuse production of asexual spores (conidia) formed by differentiation at the ends of hyphae. The mode of formation and shape of these spores is traditionally used to classify molds. Many of these spores are colored, making the fungus m...
published: 24 Aug 2015 -
.22 mold for Huben K1 and other .22 airguns
In this video I am presenting the new .22 airgun bullet mold I have developed with Miha from MP-molds. It is primarily developed for Huben K1 but will also work in other high power .22 PCPs. In video I explain all the important information, such as dimension, weight accuracy... I also demonstrate the casting and sizing procedure. You can take a look at these molds here: https://www.mp-molds.com/ https://mp-molds.com/forum/active-group-buys/6-group-buy-for-22-mold-for-huben-k1-and-other-22-airguns-march-2017#12
published: 19 Mar 2017 -
Great Video Part 1: How to make 2-Part Silicone Mold
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. Using simple methods developed over several decades in Rapid Prototyping, learn how to make a silicone mold that produces high quality parts. For 40 years, BJB Enterprises, Inc., an ISO 9001:2008 Company, has been in the business of formulating and supplying quality liquid resin systems to a vast array of industries and with a myriad of applications in mind! BJB offers a complete line-up of Castable Polyurethanes, Epoxy Systems, Silicone Casting Rubbers, Polyurethane Foam Systems, Aliphatic Water Clear Urethanes, Sprayable Polyurethanes, Pigments and Release. Be sure to visit our website: www.BJBEnterprises.com
published: 12 Jun 2013 -
-
How to make Mold and tree pot.
How to make mold by soil and cement concrete tree pot / bonsai pot.
published: 06 Nov 2016 -
Anchor Winch Rebuild - Part 9 - Plaster Block Mold Bronze Casting Failures
It's unfortunate that we give the word Failure such a negative context. Because if you are not failing at something you are either doing nothing or you are only copying the steps that someone else created. Willingness to fail is key to creativity and innovation and successful life. LIVE Celebrate Life. All of it. And thanks to Philip Carlsson of Sweden for the awesome new opening clip. Blog: http://www.svseeker.com/wp/blog/ Store: http://www.svseeker.com/wp/sv-seeker-...
published: 01 Mar 2016
How to Mold and Cast a Lightsaber!
- Order: Reorder
- Duration: 35:21
- Updated: 12 Nov 2014
- views: 22188846
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested....
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
https://wn.com/How_To_Mold_And_Cast_A_Lightsaber
This video was brought to you by Premium memberships on Tested. Thanks to our members who've supported us. Learn more about memberships here: http://www.tested.com/membership
Frank Ippolito joins us at Adam's shop for another step-by-step tutorial in prop making. This time, we learn how to make a two-part silicone mold that we can use to cast resin copies of complex objects. We demonstrate the technique by duplicating a lightsaber prop made by Adam!
Video shot and edited by Joey Fameli
Music Library provided by Jingle Punks
Thanks to Smooth-On for providing materials for this video
Like this video and let us know if you want to see more How-To videos with Frank Ippolito on Tested!
- published: 12 Nov 2014
- views: 22188846
Mold Toxins Making You Fatigued & Sick?
- Order: Reorder
- Duration: 41:28
- Updated: 09 Feb 2015
- views: 60788
Mold expert, Keith Berndtson, MD shares tips about treating and preventing mold toxicity.
➢ http://highintensityhealth.com/mold-toxicity-zaps-energy-causes-br...
Mold expert, Keith Berndtson, MD shares tips about treating and preventing mold toxicity.
➢ http://highintensityhealth.com/mold-toxicity-zaps-energy-causes-brain-fog/
-----------------------------------------Lets Connect--------------------------------------
➢ Facebook https://www.facebook.com/MikeMutzelMS
➢ Listen to the Audio in iTunes: http://highintensityhealth.com/itunes
➢ Instagram https://www.instagram.com/metabolic_mike
--------------------------------------Key Takeaways----------------------------------
Dr. Keith Berndtson: Now there’s a great need to do it. People often want to know how I got into this. And back in 2007 when I opened this practice, a patient walked in with this book called “Mold Warriors” by some guy named Ritchie Shoemaker. And you know, I finally got around opening it and reading a little bit, and began to feel like I was drinking from a fire hose because there’s so much information in it—a lot of path of physiology, but also getting into the patients’ stories and legal ramifications; and implications for agricultural practice, construction practice; remediation, inspection, and cleaning; and all that kind of stuff. So I wondered what I got myself into, but I’ve then subscribed to the newsletter from Surviving Mold, his website, which now gets about 3 million hits a month, and built up my confidence to start taking these patients on. Even at that point, I was kind of at the lower end of the learning curve. But what’s important to understand here is that this is not just about mold toxicity. Back in 1973, when there was a OPEC Embargo and there were long gasoline station lines and so forth, there was a premium on conserving energy, and so builders decided they would step up and they would start building homes that were pretty tightly sealed that you could trap heat and save money during the winter and all that.
Mike Mutzel: Sure.
Dr. Keith Berndtson: But creating conditions were moisture had nowhere to go. The buildings weren’t breathing the way they used to, and so we started to have more of what’s called “sick buildings syndrome,” which in the beginning wasn’t very well understood and kind of got laughed at the room and a lot of grand rounds and that sort of thing. But now we know much more that under certain recurrent moisture conditions or after water intrusion events¬—roofs leak, leaks under sinks, flooding of course, flooded basements—that molds can get a leg up. And all molds need to grow is moisture and cellulose; dust contains cellulose, so they pretty much have growing conditions almost anywhere where there’s been enough moisture. So it’s very important to discover these intrusions and remediate them quickly because within 48 hours, you’ve got mold growing. And not all molds are toxin producers, either; but the ones that are have genes that code for toxins that they use to defend themselves when they pick up stress signals, and that could be running into manmade chemicals in the dry wall or whatever. They make spores that carry toxins. When things dry up, the spores go dormant; but when the moisture returns, they become active, they could be spitting out toxins. And heavily water-damaged buildings, it’s not just mold toxins, there are other inflammogens—microbial, volatile organic compounds, manmade volatile organic compounds—they all enter the mix; there are fungal fragments, bacterial fragments. So anybody can get pretty sick in a building like that. But in what’s commonly referred to as “mold toxicity syndrome,” about one in four people carry these HLA genes; HLA means it’s on chromosome 6, and it has to do with the part of the immune system that presents antigens from one cell to another, processes those antigens first, and begins this process where you can acquire a coordinated cellular and antibody response against something like this should you come across it again.
https://wn.com/Mold_Toxins_Making_You_Fatigued_Sick
Mold expert, Keith Berndtson, MD shares tips about treating and preventing mold toxicity.
➢ http://highintensityhealth.com/mold-toxicity-zaps-energy-causes-brain-fog/
-----------------------------------------Lets Connect--------------------------------------
➢ Facebook https://www.facebook.com/MikeMutzelMS
➢ Listen to the Audio in iTunes: http://highintensityhealth.com/itunes
➢ Instagram https://www.instagram.com/metabolic_mike
--------------------------------------Key Takeaways----------------------------------
Dr. Keith Berndtson: Now there’s a great need to do it. People often want to know how I got into this. And back in 2007 when I opened this practice, a patient walked in with this book called “Mold Warriors” by some guy named Ritchie Shoemaker. And you know, I finally got around opening it and reading a little bit, and began to feel like I was drinking from a fire hose because there’s so much information in it—a lot of path of physiology, but also getting into the patients’ stories and legal ramifications; and implications for agricultural practice, construction practice; remediation, inspection, and cleaning; and all that kind of stuff. So I wondered what I got myself into, but I’ve then subscribed to the newsletter from Surviving Mold, his website, which now gets about 3 million hits a month, and built up my confidence to start taking these patients on. Even at that point, I was kind of at the lower end of the learning curve. But what’s important to understand here is that this is not just about mold toxicity. Back in 1973, when there was a OPEC Embargo and there were long gasoline station lines and so forth, there was a premium on conserving energy, and so builders decided they would step up and they would start building homes that were pretty tightly sealed that you could trap heat and save money during the winter and all that.
Mike Mutzel: Sure.
Dr. Keith Berndtson: But creating conditions were moisture had nowhere to go. The buildings weren’t breathing the way they used to, and so we started to have more of what’s called “sick buildings syndrome,” which in the beginning wasn’t very well understood and kind of got laughed at the room and a lot of grand rounds and that sort of thing. But now we know much more that under certain recurrent moisture conditions or after water intrusion events¬—roofs leak, leaks under sinks, flooding of course, flooded basements—that molds can get a leg up. And all molds need to grow is moisture and cellulose; dust contains cellulose, so they pretty much have growing conditions almost anywhere where there’s been enough moisture. So it’s very important to discover these intrusions and remediate them quickly because within 48 hours, you’ve got mold growing. And not all molds are toxin producers, either; but the ones that are have genes that code for toxins that they use to defend themselves when they pick up stress signals, and that could be running into manmade chemicals in the dry wall or whatever. They make spores that carry toxins. When things dry up, the spores go dormant; but when the moisture returns, they become active, they could be spitting out toxins. And heavily water-damaged buildings, it’s not just mold toxins, there are other inflammogens—microbial, volatile organic compounds, manmade volatile organic compounds—they all enter the mix; there are fungal fragments, bacterial fragments. So anybody can get pretty sick in a building like that. But in what’s commonly referred to as “mold toxicity syndrome,” about one in four people carry these HLA genes; HLA means it’s on chromosome 6, and it has to do with the part of the immune system that presents antigens from one cell to another, processes those antigens first, and begins this process where you can acquire a coordinated cellular and antibody response against something like this should you come across it again.
- published: 09 Feb 2015
- views: 60788
Seamless Silicone Mold With Mother Mold
- Order: Reorder
- Duration: 36:45
- Updated: 17 Jan 2017
- views: 31323
In this tutorial we explain the process of making a 1 piece, seamless bust mold with a resin support shell or "mother mold." For the silicone mold, we used Plat...
In this tutorial we explain the process of making a 1 piece, seamless bust mold with a resin support shell or "mother mold." For the silicone mold, we used PlatSil Gel-10 to create a soft, stretchy mold that will pull off of our pattern like a sock. For the support shell, we made a 2 piece resin mother mold using our 1512X resin thickened with PolyFiber.
Gel-10 is available here: https://www.brickintheyard.com/collections/platsil-gels
Additives such as release, pigment and thickener are here: https://www.brickintheyard.com/collections/silicone-additives-accessories
You can find our 1512X resin here: https://www.brickintheyard.com/collections/casting-resin
Resin additives are here: https://www.brickintheyard.com/collections/urethane-additives
https://wn.com/Seamless_Silicone_Mold_With_Mother_Mold
In this tutorial we explain the process of making a 1 piece, seamless bust mold with a resin support shell or "mother mold." For the silicone mold, we used PlatSil Gel-10 to create a soft, stretchy mold that will pull off of our pattern like a sock. For the support shell, we made a 2 piece resin mother mold using our 1512X resin thickened with PolyFiber.
Gel-10 is available here: https://www.brickintheyard.com/collections/platsil-gels
Additives such as release, pigment and thickener are here: https://www.brickintheyard.com/collections/silicone-additives-accessories
You can find our 1512X resin here: https://www.brickintheyard.com/collections/casting-resin
Resin additives are here: https://www.brickintheyard.com/collections/urethane-additives
- published: 17 Jan 2017
- views: 31323
Machining a DIY Injection Mold! WW114
- Order: Reorder
- Duration: 20:20
- Updated: 05 Oct 2016
- views: 135963
Using Fusion 360 & a Tormach 440 to machine a DIY Injection Mold for X39 Brick Customs!
SMW Lego Man: http://bit.ly/SMWLego
Schaller Bins: http://ebay.to/29S...
Using Fusion 360 & a Tormach 440 to machine a DIY Injection Mold for X39 Brick Customs!
SMW Lego Man: http://bit.ly/SMWLego
Schaller Bins: http://ebay.to/29SJyPk
Noga Base: http://amzn.to/2cLbzup
Mitutoyo DTI: http://amzn.to/2dl9x35
Fusion CAD/CAM File (Patreon): http://bit.ly/2e0nMeR
Subscribe For More: http://bit.ly/22CjJoK
Follow on Twitter: http://bit.ly/1RdwzGe
Facebook: http://bit.ly/1UhX4gu
Instagram: http://bit.ly/1MzIpVR
Patreon: http://bit.ly/NYCpatreon
Music copyrighted by John Saunders
https://wn.com/Machining_A_Diy_Injection_Mold_Ww114
Using Fusion 360 & a Tormach 440 to machine a DIY Injection Mold for X39 Brick Customs!
SMW Lego Man: http://bit.ly/SMWLego
Schaller Bins: http://ebay.to/29SJyPk
Noga Base: http://amzn.to/2cLbzup
Mitutoyo DTI: http://amzn.to/2dl9x35
Fusion CAD/CAM File (Patreon): http://bit.ly/2e0nMeR
Subscribe For More: http://bit.ly/22CjJoK
Follow on Twitter: http://bit.ly/1RdwzGe
Facebook: http://bit.ly/1UhX4gu
Instagram: http://bit.ly/1MzIpVR
Patreon: http://bit.ly/NYCpatreon
Music copyrighted by John Saunders
- published: 05 Oct 2016
- views: 135963
Natures Great Decomposers | Molds and Fungus Documentary - NatGeo TV
- Order: Reorder
- Duration: 44:54
- Updated: 24 Aug 2015
- views: 80741
Molds are a large and taxonomically diverse number of fungal species where the growth of hyphae results in discoloration and a fuzzy appearance, especially on f...
Molds are a large and taxonomically diverse number of fungal species where the growth of hyphae results in discoloration and a fuzzy appearance, especially on food. The network of these tubular branching hyphae, called a mycelium, is considered a single organism. The hyphae are generally transparent, so the mycelium appears like very fine, fluffy white threads over the surface. Cross-walls (septa) may delimit connected compartments along the hyphae, each containing one or multiple, genetically identical nuclei. The dusty texture of many molds is caused by profuse production of asexual spores (conidia) formed by differentiation at the ends of hyphae. The mode of formation and shape of these spores is traditionally used to classify molds. Many of these spores are colored, making the fungus much more obvious to the human eye at this stage in its life-cycle.
Read More: https://en.wikipedia.org/wiki/Mold
https://wn.com/Natures_Great_Decomposers_|_Molds_And_Fungus_Documentary_Natgeo_Tv
Molds are a large and taxonomically diverse number of fungal species where the growth of hyphae results in discoloration and a fuzzy appearance, especially on food. The network of these tubular branching hyphae, called a mycelium, is considered a single organism. The hyphae are generally transparent, so the mycelium appears like very fine, fluffy white threads over the surface. Cross-walls (septa) may delimit connected compartments along the hyphae, each containing one or multiple, genetically identical nuclei. The dusty texture of many molds is caused by profuse production of asexual spores (conidia) formed by differentiation at the ends of hyphae. The mode of formation and shape of these spores is traditionally used to classify molds. Many of these spores are colored, making the fungus much more obvious to the human eye at this stage in its life-cycle.
Read More: https://en.wikipedia.org/wiki/Mold
- published: 24 Aug 2015
- views: 80741
.22 mold for Huben K1 and other .22 airguns
- Order: Reorder
- Duration: 36:34
- Updated: 19 Mar 2017
- views: 14629
In this video I am presenting the new .22 airgun bullet mold I have developed with Miha from MP-molds. It is primarily developed for Huben K1 but will also work...
In this video I am presenting the new .22 airgun bullet mold I have developed with Miha from MP-molds. It is primarily developed for Huben K1 but will also work in other high power .22 PCPs. In video I explain all the important information, such as dimension, weight accuracy... I also demonstrate the casting and sizing procedure.
You can take a look at these molds here:
https://www.mp-molds.com/
https://mp-molds.com/forum/active-group-buys/6-group-buy-for-22-mold-for-huben-k1-and-other-22-airguns-march-2017#12
https://wn.com/.22_Mold_For_Huben_K1_And_Other_.22_Airguns
In this video I am presenting the new .22 airgun bullet mold I have developed with Miha from MP-molds. It is primarily developed for Huben K1 but will also work in other high power .22 PCPs. In video I explain all the important information, such as dimension, weight accuracy... I also demonstrate the casting and sizing procedure.
You can take a look at these molds here:
https://www.mp-molds.com/
https://mp-molds.com/forum/active-group-buys/6-group-buy-for-22-mold-for-huben-k1-and-other-22-airguns-march-2017#12
- published: 19 Mar 2017
- views: 14629
Great Video Part 1: How to make 2-Part Silicone Mold
- Order: Reorder
- Duration: 21:05
- Updated: 12 Jun 2013
- views: 298303
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. Using simple methods developed over several decades in Rapid Prototypin...
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. Using simple methods developed over several decades in Rapid Prototyping, learn how to make a silicone mold that produces high quality parts.
For 40 years, BJB Enterprises, Inc., an ISO 9001:2008 Company, has been in the business of formulating and supplying quality liquid resin systems to a vast array of industries and with a myriad of applications in mind!
BJB offers a complete line-up of Castable Polyurethanes, Epoxy Systems, Silicone Casting Rubbers, Polyurethane Foam Systems, Aliphatic Water Clear Urethanes, Sprayable Polyurethanes, Pigments and Release.
Be sure to visit our website:
www.BJBEnterprises.com
https://wn.com/Great_Video_Part_1_How_To_Make_2_Part_Silicone_Mold
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. Using simple methods developed over several decades in Rapid Prototyping, learn how to make a silicone mold that produces high quality parts.
For 40 years, BJB Enterprises, Inc., an ISO 9001:2008 Company, has been in the business of formulating and supplying quality liquid resin systems to a vast array of industries and with a myriad of applications in mind!
BJB offers a complete line-up of Castable Polyurethanes, Epoxy Systems, Silicone Casting Rubbers, Polyurethane Foam Systems, Aliphatic Water Clear Urethanes, Sprayable Polyurethanes, Pigments and Release.
Be sure to visit our website:
www.BJBEnterprises.com
- published: 12 Jun 2013
- views: 298303
SOLIDWORKS Mold Design
- Order: Reorder
- Duration: 26:27
- Updated: 18 Mar 2015
- views: 117510
How to make Mold and tree pot.
- Order: Reorder
- Duration: 29:52
- Updated: 06 Nov 2016
- views: 1929656
How to make mold by soil and cement concrete tree pot / bonsai pot.
How to make mold by soil and cement concrete tree pot / bonsai pot.
https://wn.com/How_To_Make_Mold_And_Tree_Pot.
How to make mold by soil and cement concrete tree pot / bonsai pot.
- published: 06 Nov 2016
- views: 1929656
Anchor Winch Rebuild - Part 9 - Plaster Block Mold Bronze Casting Failures
- Order: Reorder
- Duration: 30:34
- Updated: 01 Mar 2016
- views: 210139
It's unfortunate that we give the word Failure such a negative context. Because if you are not failing at something you are either doing nothing or you are onl...
It's unfortunate that we give the word Failure such a negative context. Because if you are not failing at something you are either doing nothing or you are only copying the steps that someone else created. Willingness to fail is key to creativity and innovation and successful life. LIVE Celebrate Life. All of it.
And thanks to Philip Carlsson of Sweden for the awesome new opening clip.
Blog: http://www.svseeker.com/wp/blog/
Store: http://www.svseeker.com/wp/sv-seeker-...
https://wn.com/Anchor_Winch_Rebuild_Part_9_Plaster_Block_Mold_Bronze_Casting_Failures
It's unfortunate that we give the word Failure such a negative context. Because if you are not failing at something you are either doing nothing or you are only copying the steps that someone else created. Willingness to fail is key to creativity and innovation and successful life. LIVE Celebrate Life. All of it.
And thanks to Philip Carlsson of Sweden for the awesome new opening clip.
Blog: http://www.svseeker.com/wp/blog/
Store: http://www.svseeker.com/wp/sv-seeker-...
- published: 01 Mar 2016
- views: 210139
- Playlist
- Chat
- Playlist
- Chat
2:31
Tomato Time-Lapse Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at ...
published: 24 Apr 2016
Tomato Time-Lapse Mold
Tomato Time-Lapse Mold
- Report rights infringement
- published: 24 Apr 2016
- views: 52456
13:20
Black Mold Symptoms & 16 Natural Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mo...
published: 01 Mar 2017
Black Mold Symptoms & 16 Natural Remedies
Black Mold Symptoms & 16 Natural Remedies
- Report rights infringement
- published: 01 Mar 2017
- views: 71279
35:21
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who'...
published: 12 Nov 2014
How to Mold and Cast a Lightsaber!
How to Mold and Cast a Lightsaber!
- Report rights infringement
- published: 12 Nov 2014
- views: 22188846
5:28
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.i...
published: 01 Jan 2017
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain - Mold (Official Video) 4k 2017
- Report rights infringement
- published: 01 Jan 2017
- views: 775343
9:45
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it m...
published: 28 Feb 2017
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 Signs Of Mold illness And How To Tell If You Are At Risk
- Report rights infringement
- published: 28 Feb 2017
- views: 7735
5:15
Killing Toxic Black Mold - How to Remove Mold Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might thi...
published: 19 Mar 2011
Killing Toxic Black Mold - How to Remove Mold Safely
Killing Toxic Black Mold - How to Remove Mold Safely
- Report rights infringement
- published: 19 Mar 2011
- views: 1153306
4:14
Waitress Confuses Mold with Basil - Kitchen Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference bet...
published: 23 Mar 2016
Waitress Confuses Mold with Basil - Kitchen Nightmares
Waitress Confuses Mold with Basil - Kitchen Nightmares
- Report rights infringement
- published: 23 Mar 2016
- views: 5493154
4:55
Mold and cast an action figure ( or anything ) // How-To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy ...
published: 27 Feb 2015
Mold and cast an action figure ( or anything ) // How-To
Mold and cast an action figure ( or anything ) // How-To
- Report rights infringement
- published: 27 Feb 2015
- views: 710188
9:08
Making A Silicone Brain Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https:/...
published: 28 Feb 2017
Making A Silicone Brain Mold
Making A Silicone Brain Mold
- Report rights infringement
- published: 28 Feb 2017
- views: 1255649
4:48
Mold Time Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on...
published: 12 Feb 2009
Mold Time Lapse
Mold Time Lapse
- Report rights infringement
- published: 12 Feb 2009
- views: 546780
- Playlist
- Chat
2:31
Tomato Time-Lapse Mold
Tomato Mold Time-lapse over the course of 33 days available as Timelapse Footage Video at ...
published: 24 Apr 2016
Tomato Time-Lapse Mold
Tomato Time-Lapse Mold
- Report rights infringement
- published: 24 Apr 2016
- views: 52456
13:20
Black Mold Symptoms & 16 Natural Remedies
Learn more about black mold symptoms and natural remedies here: https://draxe.com/black-mo...
published: 01 Mar 2017
Black Mold Symptoms & 16 Natural Remedies
Black Mold Symptoms & 16 Natural Remedies
- Report rights infringement
- published: 01 Mar 2017
- views: 71279
35:21
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who'...
published: 12 Nov 2014
How to Mold and Cast a Lightsaber!
How to Mold and Cast a Lightsaber!
- Report rights infringement
- published: 12 Nov 2014
- views: 22188846
5:28
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain on Facebook - http://www.facebook.com/infectedrain
Instagram - https://www.i...
published: 01 Jan 2017
Infected Rain - Mold (Official Video) 4k 2017
Infected Rain - Mold (Official Video) 4k 2017
- Report rights infringement
- published: 01 Jan 2017
- views: 775343
9:45
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 SIGNS OF MOLD ILLNESS AND HOW TO TELL IF YOU’RE AT RISK
Mold is a common issue and it m...
published: 28 Feb 2017
17 Signs Of Mold illness And How To Tell If You Are At Risk
17 Signs Of Mold illness And How To Tell If You Are At Risk
- Report rights infringement
- published: 28 Feb 2017
- views: 7735
5:15
Killing Toxic Black Mold - How to Remove Mold Safely
http://www.HowToHomeInsulation.com - Killing toxic black mold is easier than you might thi...
published: 19 Mar 2011
Killing Toxic Black Mold - How to Remove Mold Safely
Killing Toxic Black Mold - How to Remove Mold Safely
- Report rights infringement
- published: 19 Mar 2011
- views: 1153306
4:14
Waitress Confuses Mold with Basil - Kitchen Nightmares
The kitchen at Levanti's is a disgusting mess, and the staff can't tell the difference bet...
published: 23 Mar 2016
Waitress Confuses Mold with Basil - Kitchen Nightmares
Waitress Confuses Mold with Basil - Kitchen Nightmares
- Report rights infringement
- published: 23 Mar 2016
- views: 5493154
4:55
Mold and cast an action figure ( or anything ) // How-To
It's easy to make an accurate copy of something with a silicone mold. You can cast a copy ...
published: 27 Feb 2015
Mold and cast an action figure ( or anything ) // How-To
Mold and cast an action figure ( or anything ) // How-To
- Report rights infringement
- published: 27 Feb 2015
- views: 710188
9:08
Making A Silicone Brain Mold
Follow me on Instagram to win the Gummy Brain! https://goo.gl/C0Q1YU
Vat19 brain: https:/...
published: 28 Feb 2017
Making A Silicone Brain Mold
Making A Silicone Brain Mold
- Report rights infringement
- published: 28 Feb 2017
- views: 1255649
4:48
Mold Time Lapse
Special shooting aspergillus fumigatus botrytis mucor trichoderma cladosporium.
Advice on...
published: 12 Feb 2009
Mold Time Lapse
Mold Time Lapse
- Report rights infringement
- published: 12 Feb 2009
- views: 546780
- Playlist
- Chat
35:21
How to Mold and Cast a Lightsaber!
This video was brought to you by Premium memberships on Tested. Thanks to our members who'...
published: 12 Nov 2014
How to Mold and Cast a Lightsaber!
How to Mold and Cast a Lightsaber!
- Report rights infringement
- published: 12 Nov 2014
- views: 22188846
41:28
Mold Toxins Making You Fatigued & Sick?
Mold expert, Keith Berndtson, MD shares tips about treating and preventing mold toxicity. ...
published: 09 Feb 2015
Mold Toxins Making You Fatigued & Sick?
Mold Toxins Making You Fatigued & Sick?
- Report rights infringement
- published: 09 Feb 2015
- views: 60788
36:45
Seamless Silicone Mold With Mother Mold
In this tutorial we explain the process of making a 1 piece, seamless bust mold with a res...
published: 17 Jan 2017
Seamless Silicone Mold With Mother Mold
Seamless Silicone Mold With Mother Mold
- Report rights infringement
- published: 17 Jan 2017
- views: 31323
20:20
Machining a DIY Injection Mold! WW114
Using Fusion 360 & a Tormach 440 to machine a DIY Injection Mold for X39 Brick Customs!
...
published: 05 Oct 2016
Machining a DIY Injection Mold! WW114
Machining a DIY Injection Mold! WW114
- Report rights infringement
- published: 05 Oct 2016
- views: 135963
44:54
Natures Great Decomposers | Molds and Fungus Documentary - NatGeo TV
Molds are a large and taxonomically diverse number of fungal species where the growth of h...
published: 24 Aug 2015
Natures Great Decomposers | Molds and Fungus Documentary - NatGeo TV
Natures Great Decomposers | Molds and Fungus Documentary - NatGeo TV
- Report rights infringement
- published: 24 Aug 2015
- views: 80741
36:34
.22 mold for Huben K1 and other .22 airguns
In this video I am presenting the new .22 airgun bullet mold I have developed with Miha fr...
published: 19 Mar 2017
.22 mold for Huben K1 and other .22 airguns
.22 mold for Huben K1 and other .22 airguns
- Report rights infringement
- published: 19 Mar 2017
- views: 14629
21:05
Great Video Part 1: How to make 2-Part Silicone Mold
Making a 2-Part silicone mold is an essential skill to learn for casting polyurethanes. U...
published: 12 Jun 2013
Great Video Part 1: How to make 2-Part Silicone Mold
Great Video Part 1: How to make 2-Part Silicone Mold
- Report rights infringement
- published: 12 Jun 2013
- views: 298303
26:27
SOLIDWORKS Mold Design
SOLIDWORKS Mold Design
published: 18 Mar 2015
SOLIDWORKS Mold Design
SOLIDWORKS Mold Design
- Report rights infringement
- published: 18 Mar 2015
- views: 117510
29:52
How to make Mold and tree pot.
How to make mold by soil and cement concrete tree pot / bonsai pot.
published: 06 Nov 2016
How to make Mold and tree pot.
How to make Mold and tree pot.
- Report rights infringement
- published: 06 Nov 2016
- views: 1929656
30:34
Anchor Winch Rebuild - Part 9 - Plaster Block Mold Bronze Casting Failures
It's unfortunate that we give the word Failure such a negative context. Because if you ar...
published: 01 Mar 2016
Anchor Winch Rebuild - Part 9 - Plaster Block Mold Bronze Casting Failures
Anchor Winch Rebuild - Part 9 - Plaster Block Mold Bronze Casting Failures
- Report rights infringement
- published: 01 Mar 2016
- views: 210139
How to Mold and Cast a Lightsaber!...
Mold Toxins Making You Fatigued & Sick?...
Seamless Silicone Mold With Mother Mold...
Machining a DIY Injection Mold! WW114...
Natures Great Decomposers | Molds and Fungus Docum...
.22 mold for Huben K1 and other .22 airguns...
Great Video Part 1: How to make 2-Part Silicone Mo...
SOLIDWORKS Mold Design...
How to make Mold and tree pot....
Anchor Winch Rebuild - Part 9 - Plaster Block Mold...
See more photos of mold
-
Lyrics list:lyrics
-
30 Avril 75, Molodoi
-
A Bout Portant, Molodoi
-
Cassons Les Murs, Molodoi
-
Harkis, Molodoi
-
H.p. 84, Molodoi
-
Graine De Violence, Molodoi
-
Golan United, Molodoi
-
Generation Destruction, Molodoi
-
Fille Du Viet-nam, Molodoi
-
Evasion, Molodoi
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
30 Avril 75
30 avril 75
L'année du tigre dingue
Personne vraiment ne saura
C'que ça représente pour toi
Tous les chapeaux côniques
La fuite, la panique
Cette date, n'oublie pas
Le jour où Saïgon tomba
30 avril 75
Après 30 années de guerre
Sous un ciel de zinc
Tu as du mordre la terre
La honte, la folie
Sur les routes tu as fuis
Cette date, n'oublie pas
Le jour où Saïgon tomba
Oh oh oh oh... oh oh oh oh...
30 avril 75...
Cet avril est trop cruel
Pour Saïgon la belle
Tu as retourné ton arme
Contre ta tempe et sans larmes
Le drapeau, trois bandes rouges
Sur fond jaune impérial
Ne flottes plus sur la ville
Ce jour là, 30 avril
Si tous tes camarades
Sont partis dans la jungle
Tes enfants et ta femme
Sont partis dans les vagues
15 années de prison,
De ré-éducation
N'ont pas suffit à tuer
L'espoir de liberté...
Không bao già quên tu' do
Không bao già quên Thuyên Nhân
Không bao già quên Quê Hudng
Không bao già quên Sa
Và Khàng Chiên
Và Nhân Quyên
Và Giâi Phòng
Và Thudng
Và Quê Me
Va Tô Tiên
Và Lòng Tin
Và Gia D
back
Out-Of-Control Chinese Space Station Expected To Re-Enter Atmosphere Within Months
Edit WorldNews.com 07 Aug 2017
A Chinese space station that is reportedly out of the control in orbit will return to Earth in less than a year, with a small possibility debris will make it to the ground, IFL Science reports.Called Tiangong-1, it was launched into orbit in 2011, welcoming one unmanned spacecraft and two crews ... Since they lost control, its orbit has slowly degraded due to atmospheric drag by about 160 meters (525 feet) every day....
back
Rape victim, 10, doesn’t know she’s pregnant and isn’t allowed an abortion
Edit Metro 07 Aug 2017
The girl (not picture) has been told she has a stone in her belly (Picture. Getty). A 10-year-old rape victim who has been denied the right to have an abortion doesn’t even know she is pregnant. The young Indian girl was allegedly repeatedly raped by a relative who has since been jailed and is awaiting trail. Student cleared of rape after CCTV shows alleged victim leading him to her room ... Getty) ... For now, the girl is in good hands ... ....
back
Trump Attacks Sen. Blumenthal's Military Record After Criticism Over Leak Crackdown
Edit WorldNews.com 08 Aug 2017
President Donald Trump took to Twitter on Monday to hurl insults at Democratic Sen. Richard Blumenthal, calling him a "phony Vietnam con artist" after the lawmaker appeared on television to express his support for special counsel Robert Mueller's probe of Russian meddling in the election and possible collusion with Trump campaign officials, according to PBS ... “Never in U.S ... He cried like a baby and begged for forgiveness like a child....
back
Top War Crimes Experts Resigns From UN Syria Probe Over Russian Obstruction
Edit WorldNews.com 08 Aug 2017
Carla Del Ponte announced that she was resigning from the United Nations Syrian war crimes commission of inquiry over obstructions placed in the way of going forward with prosecutions by the UN and Russia, according to The Guardian ... It is unbelievable." “In Rwanda and the former Yugoslavia, I was able to pursue investigators, file indictments and arrest warrants [that led] to trials and convictions. But in this case nothing happens ... ....
back
GOP Donor Sues To Get Donations Returned After Obamacare Repeal Fails: Report
Edit WorldNews.com 07 Aug 2017
Fallout from Congressional Republicans efforts to repeal and replace the former President Barack Obama’s signature legislation known as the Affordable Care Act, or Obamacare, continues to be felt, The Daily Beast reported ... But after Republicans were unable to pass new health care legislation, Heghmann felt scammed ... House of Representatives and the U.S ... Protesters risked arrest to demonstrate outside congressional offices....
Gloria Allred Under Investigation by California, D.C. Bars
Edit San Francisco Chronicle 08 Aug 2017
Hunter’s age and gender discrimination lawsuit accused CBS Broadcasting of allegedly passing him over for Los Angeles television weather reporting jobs and hiring young women reporters “cut from the same blond, attractive, buxom mold.” Allred’s TV deal with CBS Television Studios was made public by “Newsroom” writer/executive ......
These 13 Cool Cars From the 1980s And 1990s Are Absolutely Worthless Collectibles
Edit The Street 08 Aug 2017
When you think of an '80s or '90s car, what comes to mind?. Is it the DeLorean from "Back to the Future"? Is it Tom Selleck's Ferrari (RACE) from "Magnum P.I."? Is it Steve Sanders's Corvette in Beverly Hills 90210? Your parents' Chrysler (FCAU) K car or minivan?. Unfortunately for would-be collectors, the '80s and '90s meant a lot of molded plastic wrapped around underpowered engines ... More of What's Trending on TheStreet ... ....
Beaten Bolt still mom's golden boy
Edit China Daily 08 Aug 2017
LONDON - Usain Bolt rightly describes himself as a legend but while his natural ability brought him that status it was his parents who molded him into the winning personality he became. Fun-loving, easy-going and a showman but with a remorseless competitive edge, both on and off the track, Bolt also has a sensitive side to him which extends particularly to his mother Jennifer ... I am a mummy's boy." ... He said, 'OK, mommy ... He didn't like it....
Wolves Owner Wants To Face-To-Face Meeting With Wiggins Before Max Contract
Edit CBS Sports 08 Aug 2017
— Minnesota Timberwolves owner Glen Taylor said Monday that he is ready to commit nearly $150 million to Andrew Wiggins with a max-level extension of his rookie contract. Before he does so, Taylor wants to sit down face-to-face with Wiggins to hear the former No ... “We’ve got to be better ... With a laid-back personality and an aversion to media attention, Wiggins does not fit the typical mold of a brash, outspoken star ... ....
Timberwolves owner willing to go max on Wiggins, but first wants a face-to-face
Edit Pioneer Press 08 Aug 2017
MANKATO — Timberwolves owner Glen Taylor said Monday that he is ready to commit nearly $150 million to Andrew Wiggins with a max-level extension of his rookie contract. Before he does so, however, Taylor wants to sit down face-to-face with Wiggins to hear the former No ... “We’ve got to be better ... With a laid-back personality and an aversion to media attention, he does not fit the typical mold of a brash, outspoken star....
Rachel follows her heart in 'The Bachelorette' finale
Edit ABC7 08 Aug 2017
We picked back up with Rachel and Peter's one-on-one fantasy date. He told her, "I do care about you." Rachel said, "And I do too," as she cried ... So, she offered Peter the fantasy suite card. He happily accepted ... Breaking the mold of past seasons, the live show took over for a bit and Eric came out to have a conversation with Rachel, which would normally happen in the last hour of the show during "After the Final Rose." ... Aw! ... Wow ... Zing ... ....
Global Injection Blow Molding Machines Market 2017 - Jomar, SMF, Krones, Bekum, Graham Engineering, KHS
Edit Community news 07 Aug 2017
Injection Blow Molding Machines market research report provides the newest industry data and industry future trends, allowing you to identify the products and end users driving Revenue growth and profitability also lists the leading competitors and provides the insights strategic industry Analysis of the key factors influencing the market ... Global Injection Blow Molding Machines Market Professional Survey Report 2017....
Core Molding Technologies Initiates Quarterly Cash Dividend of $0.05 Per Share
Edit Market Watch 07 Aug 2017
COLUMBUS, Ohio, Aug 07, 2017 (BUSINESS WIRE) -- Core Molding Technologies, Inc. (nyse american.CMT) (“Core Molding” or the “Company”) today announced that its Board of Directors has authorized the payment of a quarterly cash dividend, the first in the Company’s history ... About Core Molding Technologies, Inc. Core Molding Technologies, Inc ... Additionally, the company offers reaction injection molding (RIM) of dicyclopentadiene (DCPD)....
Cobb, Boom and Tamme wore No. 18. Does Kentucky’s new 18 fit the mold?
Edit Lexington Herald-Leader 07 Aug 2017Purging Compound Market - Global Industry Volume and Region Analysis – 2025
Edit Community news 07 Aug 2017
Based on process, the market can be split into extrusion, blow molding, and injection molding. Demand for purging compounds in the injection molding process is expected to rise significantly during the forecast period. Injection molding process is one of most popular processes for producing plastic parts ... Adoption of injection molding in the extrusion ......
Carbon Fiber Reinforced Plastics (CFRP) Market- Trends and Opportunity Analysis, Forecast 2016-2024
Edit Community news 07 Aug 2017
CFRP Market Overview . Fiber reinforced composites have been used in various fields of engineering since a long time, albeit their use mainly limited to automotive, aerospace, and defense industries ... CFRP are manufactured using methods such as molding, vacuum bagging, compression bolding, and filament winding.The U.S ... By raw material type ... Compression Molding Process . Resin Transfer Molding Process ... Injection Molding Process ... Marine ... ....
Callaway Golf 2017 O-Works Versa Tank # 7 Mallet Steel
Edit Golf Blogger 07 Aug 2017
Features New 2017 micro hinge insert technology provides incredible gains in topspin and roll at impact regardless of your stroke The stainless steel micro hinge plate is co-molded into our thermoplastic elastomer feel layer The revolutionary high contrast versa alignment technology allows your eyes to key in on the Linear designs to highlight the ......
Life of Kylie Leaves Us Knowing Less About Its Star
Edit New York Magazine 07 Aug 2017
Welcome to Life of Kylie, or The Life of Kylie if you’re one of Kylie’s famous family members. Basically, welcome to the one television show that leaves you knowing less about the titular celeb. Clocking in at only 30 minutes and breaking the hour-long mold of Kardashian shows, Life...Life of Kylie Leaves Us Knowing Less About Its Star">More » ... ....
Trump planning to run for 2nd term but he may not last 2017: Analyst
Edit Press TV 07 Aug 2017
US President Donald Trump is planning to run for a 2nd term in 2020 but he may not last 2017, according to Myles Hoenig, an American political analyst and activist. ... Pence is sharpening his knives for a challenge while the administration is saying it’s for re-election ... “But this president has broken the mold and like the mold in the White House, it sticks to this president like a badge of honor,” he added ... ....
Canon Virginia, Inc. Collaborates with CVR Medical to Manufacture Intuitive, Next-Generation Stroke Prevention Technology
Edit Market Watch 07 Aug 2017
NEWPORT NEWS, Va., Aug ... (CVM.V) ("CVR Medical") ... "CVI's ability to conduct on-site molding of parts and full device assembly will substantially reduce costs and set CVR Medical on a course for a cost-effective, expedited market entry.". About Canon Virginia, Inc ... Canon Virginia offers a host of contract manufacturing services including injection mold making, medical device manufacturing and aftermarket services....
- 1
- 2
- 3
- 4
- 5
- Next page »
