Turning

Turning is a machining process in which a cutting tool, typically a non-rotary tool bit, describes a helical toolpath by moving more or less linearly while the workpiece rotates. The tool's axes of movement may be literally a straight line, or they may be along some set of curves or angles, but they are essentially linear (in the nonmathematical sense). Usually the term "turning" is reserved for the generation of external surfaces by this cutting action, whereas this same essential cutting action when applied to internal surfaces (that is, holes, of one kind or another) is called "boring". Thus the phrase "turning and boring" categorizes the larger family of (essentially similar) processes. The cutting of faces on the workpiece (that is, surfaces perpendicular to its rotating axis), whether with a turning or boring tool, is called "facing", and may be lumped into either category as a subset.

Turning can be done manually, in a traditional form of lathe, which frequently requires continuous supervision by the operator, or by using an automated lathe which does not. Today the most common type of such automation is computer numerical control, better known as CNC. (CNC is also commonly used with many other types of machining besides turning.)

Film festival

A film festival is an organized, extended presentation of films in one or more cinemas or screening venues, usually in a single city or region. Increasingly, film festivals show some films outdoors. Films may be of recent date and, depending upon the festival's focus, can include international and domestic releases. Some festivals focus on a specific film-maker or genre (e.g., film noir) or subject matter (e.g., horror film festivals). A number of film festivals specialise in short films of a defined maximum length. Film festivals are typically annual events. Some film historians do not consider Film Festivals as official releases of film, like Jerry Beck. The best known film festivals are the Venice Film Festival, the Cannes Film Festival, the Toronto Film Festival, Sundance Film Festival, and the Berlin International Film Festival, the latter being the largest film festival worldwide, based on attendance. The Venice Film Festival is the oldest major festival. The Melbourne International Film Festival is the largest film festival in the Southern Hemisphere and one of the oldest in the world. A 2013 study found 3,000 active films festivals worldwide—active defined as having held an event in the previous 24 months.

Turning Point

Turning point may refer to:

Film

Short film

A short film is any film not long enough to be considered a feature film. Although no consensus exists as to where that boundary is drawn, the Academy of Motion Picture Arts and Sciences defines a short film as "an original motion picture that has a running time of 40 minutes or less, including all credits". The term featurette originally applied to a film longer than a short subject, but shorter than a standard feature film.

The increasingly rare term short subject means approximately the same thing. An industry term, it carries more of an assumption that the film is shown as part of a presentation along with a feature film. Short is an abbreviation for either term. Short films are often screened at local, national, or international film festivals and made by independent filmmakers for non profit, either with a low budget or no budget at all. They are usually funded by film grants, non profit organizations, sponsor, or personal funds. Short films are generally used by filmmakers to gain experience and/or prove their talent in order to gain funding for future films from private investors, entertainment companies, or film studios.