How to Make Roman Shades Using Iron-on-Roman Rib Tape

• Report rights infringement
• published: 01 Oct 2014
• views: 218140

How to make roman shades using iron-on-roman rib tape will walk you through the steps required to make your very own roman shades. We’re going to show you how to take measurements, how to sew them up, how to attach rings and hardware and how to install them in your window. A full materials list is located at the end of the video so you can purchase fabric and supplies to do it yourself. For your roman shade, choose from hundreds of great home décor fabrics at http://www.sailrite.com. How to Make Roman Shades Using Iron-on-Roman Rib Tape Chapters: • Measuring the Window – 0:32 min • Patterning – 4:54 min • Sewing Decorative & Lining Fabric – 9:21 min • Creasing Sides & Sewing Bottom Sleeve – 12:01 min • Adding Ribs or Dowels – 15:21 min • Finishing Top Edge – 20:40 min • Building a Headrail – 21:50 min • Installing Curtain Hardware – 23:24 min • Materials List – 33:02 min This instructional video is intended for personal use. If making shades to sell or gift, they must comply with the latest safety regulations. WARNING: Cords can be hazardous, even fatal, to young children. Keep cords out of reach of children. Keep cribs, playpens, and other furniture away from cords. Do not tie cords together or allow cords to twist or loop together. NOTE: Laundering shades with iron-on-rib tape is not recommended unless the tape has been stitched in place. Materials List for items from Sailrite: • Decorative Fabric from Sailrite - Use fabric calculator • Drapery Lining Fabric from Sailrite - Use fabric calculator • Thread (Extra Strong Nylon Upholstery thread or V-30 to v-46 Polyester thread) - Less than 1oz • Iron-On Roman Rib Tape 1" - Item # 104858 - (Number of segments – 1) x width of shade = Tape length required • Roman Shade Plastic 1/4" Ribs - Item # 104987 - Number of segments – 1 = Ribs required (each length of rib must be equal to width of shade) • Velcro Hook & Loop - Item #467100 & 471100 - Width of shade = length of hook and loop required • Sew on Rings for Roman & Balloon Shades - Item # 104469 - ((Number of segments – 1) ÷ 2) x number of lift lines • Bottom Rod for Fabric Shades 3/8" Brass Finish - Item # 104989 - One rod equal to width of shade • Leechline Dacron 5/64" - Item # 21207 - Use fabric calculator • Cord Lock for Roman & Austrian Shades (Small - Item # 104468) (Large - Item # 104857) - One per shade • Plastic Lift Cord Condenser White - Item # 104470 - One per shade Materials list for hardware store: • Wood Board as headrail (approximately 1" x 2" x width of shade) • Screws (to attach cord lock & headrail (2 each)) • Screw Eyes (1 per lift line) • Tassel Tools Used: • Sewing Machine • Pencil, Straight Edge, Measuring Tape, Scissors, Hand Needle, Steam Iron, Saw, Stapler, Hacksaw, Drill, Screw Driver • Comfort Grip Rotary Cutter - Item # 9655 • Cutting Mat 18" x 24" - Item # 102990 • Multi Use Pins 1 1/2" - Item # 102985