- published: 23 Nov 2010
- views: 7556768
Plastic pipework is used for the conveyance of drinking water, waste water, chemicals, heating fluid and cooling fluids, foodstuffs, ultra-pure liquids, slurries, gases, compressed air and vacuum system applications.
Plastic pipe systems fulfil a wide variety of service requirements. Product standards for plastics pipe systems are prepared within the standards committee known as CEN/TC155. These requirements are precisely described in a complete set of European Product Standards for each application alongside their specific characteristics.
For example:
Conveyance of drinking water: Hygienic requirements
Conveyance of gas: Highest Safety requirements
Plastic pipes for radiant heating and floor heating: Temperature resistance over decades
Sewer applications: High chemical resistance.
Plastic pipes are perfectly capable of fulfilling the specific requirement for each application. They do so with a high level of performance over a long lifetime and with reliability and safety.
Polyvinyl chloride, more correctly but unusually poly(vinyl chloride), commonly abbreviated PVC, is the third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.
PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible. The rigid form of PVC is used in construction for pipe and in profile applications such as doors and windows. It is also used for bottles, other non-food packaging, and cards (such as bank or membership cards). It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is also used in plumbing, electrical cable insulation, imitation leather, signage, inflatable products, and many applications where it replaces rubber.
Pure poly (vinyl chloride) is a white, brittle solid. It is insoluble in alcohol but slightly soluble in tetrahydrofuran.
PVC was accidentally synthesized in 1872 by German chemist Eugen Baumann. The polymer appeared as a white solid inside a flask of vinyl chloride that had been left exposed to sunlight. In the early 20th century the Russian chemist Ivan Ostromislensky and Fritz Klatte of the German chemical company Griesheim-Elektron both attempted to use PVC in commercial products, but difficulties in processing the rigid, sometimes brittle polymer thwarted their efforts. Waldo Semon and the B.F. Goodrich Company developed a method in 1926 to plasticize PVC by blending it with various additives. The result was a more flexible and more easily processed material that soon achieved widespread commercial use.
A rubber band, also known as a binder, elastic band, lackey band, laggy band, gum band, or elastic, is usually ring shaped and commonly used to hold multiple objects together. The rubber band was patented in England on March 17, 1845 by Stephen Perry.Mesoamericans (such as Aztecs and Mayans) were using natural rubber products by 1600 B.C.; they mixed latex with other materials to get desired properties. In 1839, Charles Goodyear developed vulcanization which is used to make rubber today. Most rubber bands are manufactured out of natural rubber. Rubber bands come in a variety of sizes.
Rubber bands are made by extruding the rubber into a long tube to provide its general shape, putting the tubes on mandrels, curing the rubber with heat, and then slicing it across the width of the tube into little bands. This causes the tube to split into multiple sections, creating a rubber band.
While other rubber products may use synthetic rubber, most rubber bands are primarily manufactured using natural rubber because of its superior elasticity.
This kid, I think it's at college, makes an instrument out of PVC pipe and plays everything from Lady Gaga to Ozzy on it, awesome video check it out and subscribe please Ps.: Original Video By Snubbyj
Leah from See Jane Drill demonstrates how to cut and assemble PVC plumbing pipe. Channel http://www.youtube.com/see jane drill Website http://www.seejanedrill.com Facebook http://www.facebook.com/see jane drill http://youtu.be/N4iVTg9JQv8
10 Life Hacks with PVC #4 Here is the 4th Edition to our 10 Life hacks to make your life easier. We built and tested each of these with success. I hope you can benefit from some of these awesome life hacks. Here is the link to the first 10 Life Hacks video: https://youtu.be/_bDdWWw6cp8 Second 10 Life Hacks Video: https://youtu.be/aLfE0lCAB7U Third 10 Life Hacks with PVC video: https://youtu.be/okywlLlMHB0 Lifehacks are great techniques, tricks, shortcuts, or novelty ways to use certain products in uncommon ways to make life easier. Please Like and Comment Just remember that PVC is only a form of hard plastic. It can and will break if too much weight or force is applied and injuries can occur. Please use caution when using anything made from PVC. The Ultimate Life Hack: John 3:16-1...
Please SUBSCRIBE and LIKE my Facebook page For all Bookings: pipeguy.management@gmail.com http://www.pipeguy.bandcamp.com http://www.facebook.com/pip3guy @pip3guy Playing a live set in Rundle Mall, Adelaide, South Australia on my homemade PVC pipe instrument, played with a pair of thongs (flip flops to the non-Aussie viewers :P) To use this video in a commercial player or in broadcasts, please email licensing@storyful.com
http://www.thegeekgroup.org - Chris takes Dave through the process of properly gluing PVC pipes together, while working on the vacuum table for the sheet router. These methods are applicable in the plumbing and heating industry. Subscribe for more High Voltage, Equipment Autopsies, science videos and general geek related awesomeness. Based in Grand Rapids, Michigan, The Geek Group provides access to science, technology, engineering and math by developing programming and facilities for individuals and institutions to learn, explore, innovate and play at an independent pace according to their needs. The Geek Group has many thousands of members scattered across the globe, in every state in the US and one hundred and forty-two countries. Come help us build Awesome!
PVC PIPES EXTRUSION LINE www.amut.it FEATURES: BA125/28D -- Twin screw extruder 110kw motor Dosing unit and loading unit for vergin material Dosing unit and loading unit for regrind Temperature control cabinet with Industrial PC Siemens S7 2-stages calibration trough, 630mm max diameter, 10mt long Cooling trough, 6mt long Pipe marking unit 4 caterpillar haul-off unit Planetary cutting unit, equipped with universal clamps In-line belling unit, for solvent-cement socket and with O-Ring Extrusion head for pipes up to 500mm diameter Dies, sizers and belling tools for the below mentioned dimensions: 160mm Ø pipe: PN16 200mm Ø pipe: PN10-16 250mm Ø pipe: PN16 315mm Ø pipe: PN10 355mm Ø pipe: PN16 400mm Ø pipe: PN10-16 500mm Ø pipe: PN10-16 Mailto: info@amut.it
how to make a simple PVC pipe air guns can shoot all the rats and snakes, it is powerful enough to destroy the rats and snakes dangerous thank you for . alcoholic homemade gun shot continuously simple, very compact to shoot fish, hunt rats and snakes warning: it is dangerous to let out of reach of children under . WARNING: Airguns should not be pointed at people, animals, or any living thing. Projectiles shot at high velocity may cause deep wounds leading to infection, . so cool. you'll find a way to shoot the fish, mice and snakes here.
►Warning! Make sure to wear a suitable Gas Mask when heating the PVC or do it outside. In this video, we look at 3 things that you can make from a PVC/ABS pipe. Some of the items used in this video: (Affiliate links) ►Pipe bender springs http://amzn.to/21EjAUN ►26 Gauge Nichrome Wire http://amzn.to/1oZLmdk ►Universal Power Adapter (similar to the one I have) http://amzn.to/21Ejfl3 ---------------------------------------------------------------------- Warning: Use this video content at your own risk. ---------------------------------------------------------------------- Music:Kevin MacLeod Title: Pulse Rock Pulse Rock, Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
PVC PIPE Raft at the Lake We finally got the PVC raft to the lake. Did I fall in? Or did it Float? Watch and find out. Watch how we build this raft in last weeks video: https://www.youtube.com/watch?v=NJDIPraHQ1Y You can follow us on Facebook: https://www.facebook.com/specificlovefanpage Instagram: https://www.instagram.com/specific_love_creations/ More PVC Projects you will like: PVC Skateboard - How to make https://youtu.be/x42mP5z-fgE PVC Kindle Fire Stand Tablet Holder https://youtu.be/FTC1ho913Ws PVC Dog Wash - Pet Life Hacks https://youtu.be/ylnORx0iaX0 Lego Table DIY with PVC https://youtu.be/FoRbJ--u2Pc Ping Pong Ball Launcher Cannon https://youtu.be/P7vjKovMSNA PVC Shotgun - Rubber Band Gun - Nerf Gun https://www.youtube.com/watch?v=O6Q9DJp4jmQ PVC Rubber Band Machine Gu...
A versatile DIY stabilizer rig for strong enough for the 5Dmk2, but made for the GH2. Like road bike handlebars, it allows multiple grips and shooting positions for flexibility and fatigue resistance. Inspired by the PVC fig rig designed by the Frugal Filmaker (on youtube), the Road Bike Rig will shoot eye-level, shoulder level, and hip level with ease. There are no fewer than 9 gripping points, and up to 5 points of contact when shooting. Compared to the "cross bow" style of DIY PVC rigs out there, this is more rigid, yet far more versatile and comfortable. The first two minutes explain the concept, and rest of the video explains how to build it. This is moderate to difficult: Precision PVC cuts, precise PVC bonding, drilling, and painting are required. Excluding quick release and...
RigWheels are a new multi purpose wheel for production that you can configure in many ways. In this demonstration we are constructing a camera dolly using PVC Pipe and some bolts and a set of RigWheels. Be sure to check out our main product description video here. https://vimeo.com/90343086 Visit http://www.rigwheels.com/product/4-microwheels/for more information. Facebook:...http://on.fb.me/qvEIj8 Twitter:.......http://bit.ly/rrNxBr G+..............http://bit.ly/nOfLLs
This short video is a small sample of the stock footage I am shooting for Digital Juice. Take a look at http://www.tomguilmette.com for more info. I hiked my Vinten Vision 3 tripod, Vinten baby legs, 10 feet of PVC dolly track, my 2ftx2ft skateboard dolly, the Canon 5dmk2 DSLR with matte box and three filters, Zoom h4 audio recorder and a bag of Nikon lenses two miles up a mountain. I actually hiked 16 miles total that day. Here is the quick version of the story… I hiked two 10 foot pieces of 1 1/4inch PVC pipe, the dolly and the Vinten baby legs two miles to waterfalls on the side of Mount Chocorua in Albany, New Hampshire. I hid all the stuff under a rock at the edge of a 30 foot cliff face. I then hiked two miles back to the car at the trail head. Next, I grabbed the Canon 5dmk2 cam...
Twenty-First Century Bonfire is an aleatoric light sculpture intended for collective viewing in quiet, low-light, intimate spaces. The Bonfire consists of seven rescued television sets topped by protruding matrices of PVC pipe that diffuse live television broadcasts into a shifting array of rich colors and abstract shapes. These heavily-researched and targeted messages of consumption—all provided free of charge by unwitting corporate collaborators—are filtered into abstraction simply by scattering them inside the PVC piping, rendering the process entirely transparent to the curious observer. The work is intended to be experienced, like an actual bonfire, at the center of a gathering of viewers. Situated accordingly, the installation becomes a space to be quiet, to meditate, to think, and...
http://www.rigwheels.com/product/rail-brackets/ 2 years of kicking around design ideas and prototypes have gone into the design of these Rail Brackets. A simple concept on the surface however, one of the rules we live by is that our parts have to be multipurpose and multifunctional. Every bracket we have seen in the marketplace is proprietary in function (a few allow for different sizes of pipe). We wanted to produce a bracket that is truly “universal” and believe we have threaded the needle between function, design and price. These brackets are universal in BOTH width and pipe size so they can be used with virtually any suspended rail type slider/dolly on the market. You can use pipe with an outside diameter between 1″ (24mm) and 2″ (50mm). You can also use square/rectangular rails up to...