- published: 12 Jan 2015
- views: 3300566
A jet engine is a reaction engine discharging a fast moving jet that generates thrust by jet propulsion in accordance with Newton's laws of motion. This broad definition of jet engines includes turbojets, turbofans, rockets, ramjets, and pulse jets. In general, jet engines are combustion engines but non-combusting forms also exist.
In common parlance, the term jet engine loosely refers to an internal combustion airbreathing jet engine (a duct engine). These typically consist of an engine with a rotary (rotating) air compressor powered by a turbine ("Brayton cycle"), with the leftover power providing thrust via a propelling nozzle. Jet aircraft use these types of engines for long-distance travel. Early jet aircraft used turbojet engines which were relatively inefficient for subsonic flight. Modern subsonic jet aircraft usually use high-bypass turbofan engines. These engines offer high speed and greater fuel efficiency than piston and propeller aeroengines over long distances.
The Boeing 787 Dreamliner is a long-range, mid-size wide-body, twin-engine jet airliner developed by Boeing Commercial Airplanes. Its variants seat 242 to 335 passengers in typical 3-class seating configurations. It is Boeing's most fuel-efficient airliner and is a pioneering airliner with the use of composite materials as the primary material in the construction of its airframe. The 787 was designed to be 20% more fuel efficient than the Boeing 767, which it was intended to replace. The 787 Dreamliner's distinguishing features include mostly electrical flight systems, swept wingtips, and noise-reducing chevrons on its engine nacelles. It shares a common type rating with the larger Boeing 777 to allow qualified pilots to operate both models.
The aircraft's initial designation was the 7E7, prior to its renaming in January 2005. The first 787 was unveiled in a roll-out ceremony on July 8, 2007 at Boeing's Everett factory. Development and production of the 787 has involved a large-scale collaboration with numerous suppliers worldwide. Final assembly takes place at the Boeing Everett Factory in Everett, Washington, and at the Boeing South Carolina factory in North Charleston, South Carolina. Originally planned to enter service in May 2008, the project experienced multiple delays. The airliner's maiden flight took place on December 15, 2009, and completed flight testing in mid-2011.
Rolls-Royce may refer to:
Help us to make future videos for you. Make LE's efforts sustainable. Please support us at Patreon ! https://www.patreon.com/LearnEngineering The working of a jet engine is explained in this video in a logical and illustrative manner with help of animation. This video takes the viewer through 1-spool engine, 2-spool engine, turbo jet engine and turbofan engine. Like us on FB : https://www.facebook.com/LearnEngineering Voice-over artist :https://www.fiverr.com/mikepaine
They are simple and you can make one even if you don,t have a workshop and a range of tools, well thats at least what my plan is but will it work or will it just turn out to be a waste of time...... See if it works here http://www.youtube.com/watch?v=EorMrpM6q9Q All parts used in this video can be viewed on my website here at this page. http://www.colinfurze.com/no-weld-jet.html also follow me on twitter https://twitter.com/colin_furze and my facebook page https://www.facebook.com/pages/Colin-furze/521680751253584 To see how to make one properly click here http://www.youtube.com/watch?v=Gh34A0b8MrE and then what happenes when you use it to cook http://www.youtube.com/watch?v=QxpHJipB67g enjoy and hope i can inspire someone. music by MARCH TO THE GRAVE
A gas turbine engine from a U.S. Air Force F-16C+ Fighting Falcon is tested at full afterburner at the Atlantic City Air National Guard Base in Egg Harbor Township, N.J. The Engine Test Cell Facility, commonly referred to as the "Hush House," is a multi-function building used to perform diagnostic, troubleshooting and follow-on maintenance testing on uninstalled engines and high powered installed engine testing while the engine is in the F-16 aircraft. The General Electric F110-GE-100 turbofan produces close to 29,000 pounds of static thrust in afterburner, which can propel the Fighting Falcon to approximately twice the speed of sound. AiirSource Military covers events and missions from the United States Armed Forces. Visit our channel for more military videos: http://www.youtube.com/Ai...
What's it take to get a jet engine up and running? There are a few ways to do it, and we'll show each one. Apply to ExpressJet today: http://www.expressjet.com/apply/?ref=bold Want more great aviation content? Subscribe to Boldmethod: http://www.boldmethod.com/mail/subscribe/?source=yt
How to built a Rolls Royce jet engine. Boeing 787 engine. Cómo se fabrica el motor Rolls Royce del Boeing 787.
Testing new afterburner on my diy gasturbine powered kart, this is a similar engine to the one in Dan Goodwins , Trident Peel car that set a new world record for a peel trident at Santa Pod's, Flame and Thunder 2014. If you would like to know more about these engines look on facebook for diy gasturbines or www.diygt.org
This is the first commercial model jet engine to feature an axial flow compressor, the compressor section is a 4 stage axial with a single stage axial turbine, this prototype was designed to prove that it could be done in model form.
SUBSCRIBE on TRAMBOLINO: https://goo.gl/YXjMKn Powerful jet engines starting
Предыдущая серия - https://www.youtube.com/watch?v=eYWAJ2aATUY В этом видео получилось выйти на самоподдерживаемые обороты. Кратковременно правда, но теперь я точно уверен, что двигатель будет работать.
Help us to make future videos for you. Make LE's efforts sustainable. Please support us at Patreon ! https://www.patreon.com/LearnEngineering The working of a jet engine is explained in this video in a logical and illustrative manner with help of animation. This video takes the viewer through 1-spool engine, 2-spool engine, turbo jet engine and turbofan engine. Like us on FB : https://www.facebook.com/LearnEngineering Voice-over artist :https://www.fiverr.com/mikepaine
They are simple and you can make one even if you don,t have a workshop and a range of tools, well thats at least what my plan is but will it work or will it just turn out to be a waste of time...... See if it works here http://www.youtube.com/watch?v=EorMrpM6q9Q All parts used in this video can be viewed on my website here at this page. http://www.colinfurze.com/no-weld-jet.html also follow me on twitter https://twitter.com/colin_furze and my facebook page https://www.facebook.com/pages/Colin-furze/521680751253584 To see how to make one properly click here http://www.youtube.com/watch?v=Gh34A0b8MrE and then what happenes when you use it to cook http://www.youtube.com/watch?v=QxpHJipB67g enjoy and hope i can inspire someone. music by MARCH TO THE GRAVE
A gas turbine engine from a U.S. Air Force F-16C+ Fighting Falcon is tested at full afterburner at the Atlantic City Air National Guard Base in Egg Harbor Township, N.J. The Engine Test Cell Facility, commonly referred to as the "Hush House," is a multi-function building used to perform diagnostic, troubleshooting and follow-on maintenance testing on uninstalled engines and high powered installed engine testing while the engine is in the F-16 aircraft. The General Electric F110-GE-100 turbofan produces close to 29,000 pounds of static thrust in afterburner, which can propel the Fighting Falcon to approximately twice the speed of sound. AiirSource Military covers events and missions from the United States Armed Forces. Visit our channel for more military videos: http://www.youtube.com/Ai...
What's it take to get a jet engine up and running? There are a few ways to do it, and we'll show each one. Apply to ExpressJet today: http://www.expressjet.com/apply/?ref=bold Want more great aviation content? Subscribe to Boldmethod: http://www.boldmethod.com/mail/subscribe/?source=yt
How to built a Rolls Royce jet engine. Boeing 787 engine. Cómo se fabrica el motor Rolls Royce del Boeing 787.
Testing new afterburner on my diy gasturbine powered kart, this is a similar engine to the one in Dan Goodwins , Trident Peel car that set a new world record for a peel trident at Santa Pod's, Flame and Thunder 2014. If you would like to know more about these engines look on facebook for diy gasturbines or www.diygt.org
This is the first commercial model jet engine to feature an axial flow compressor, the compressor section is a 4 stage axial with a single stage axial turbine, this prototype was designed to prove that it could be done in model form.
SUBSCRIBE on TRAMBOLINO: https://goo.gl/YXjMKn Powerful jet engines starting
Предыдущая серия - https://www.youtube.com/watch?v=eYWAJ2aATUY В этом видео получилось выйти на самоподдерживаемые обороты. Кратковременно правда, но теперь я точно уверен, что двигатель будет работать.
S08E32
How developed powerful jet engines
How To Build A Jumbo Jet Engine By Rolls Royce The Ultimate Jet Engine