Electronic article surveillance

Electronic article surveillance (EAS) is a technological method for preventing shoplifting from retail stores, pilferage of books from libraries or removal of properties from office buildings. Special tags are fixed to merchandise or books. These tags are removed or deactivated by the clerks when the item is properly bought or checked out. At the exits of the store, a detection system sounds an alarm or otherwise alerts the staff when it senses active tags. Some stores also have detection systems at the entrance to the restrooms that sound an alarm if someone tries to take unpaid merchandise with them into the restroom. For high-value goods that are to be manipulated by the patrons, wired alarm clips called spider wrap may be used instead of tags.

Electronic article surveillance tags: acousto-magnetic (top) and RF (bottom).

History

Surveillance tags that could be attached to items in stores were first invented by Arthur Minasy in 1966.

Types

There are several major types of electronic article surveillance systems:

• Electro-Magnetic, also known as magneto-harmonic
• Acousto-magnetic, also known as magnetostrictive
• Radio Frequency (8.2 MHz)
• Microwave
• Video surveillance systems (to some extent)

Electro-magnetic systems

EM tag

These tags are made of a strip of amorphous metal (metglas) which has a very low magnetic saturation value. Except for permanent tags, this strip is also lined with a strip of ferromagnetic material with a moderate coercive field (magnetic "hardness"). Detection is achieved by sensing harmonics and sum or difference signals generated by the non-linear magnetic response of the material under a mixture of low-frequency (in the 10 Hz to 1000 Hz range) magnetic fields.

When the ferromagnetic material is magnetized, it biases the amorphous metal strip into saturation, where it no longer produces harmonics. Deactivation of these tags is therefore done with magnetization. Activation requires demagnetization.

This system is suitable for items in libraries since the tags can be deactivated when items are borrowed and re-activated upon return. It is also suitable for merchandise in retail stores, due to the small size and very low cost of the tags (Tattle-Tape).

Electro-magnetic systems are no longer common in food or apparel retail environments, most having been replaced by radio frequency, acousto-magnetic or even RFID platforms. The technology is still popular in library environments where the need to deactivate and reactivate tags is a necessity; however here too RFID platforms have been gaining ground in the last 10 years due to their greater range of use.

Acousto-magnetic systems

A cutaway image of an acousto-magnetic tag.

These are similar to magnetic tags in that they are made of two strips: a strip of magnetostrictive, ferromagnetic amorphous metal and a strip of a magnetically semi-hard metallic strip, which is used as a biasing magnet (to increase signal strength) and to allow deactivation. These strips are not bound together but free to oscillate mechanically.

Amorphous metals are used in such systems due to their good magnetoelastic coupling, which implies that they can efficiently convert magnetic energy into mechanical vibrations.

The detectors for such tags emit periodic tonal bursts at about 58 kHz, the same as the resonance frequency of the amorphous strips. This causes the strip to vibrate longitudinally by magnetostriction, and it continues to oscillate after the burst is over. The vibration causes a change in magnetization in the amorphous strip, which induces an AC voltage in the receiver antenna. If this signal meets the required parameters (correct frequency, repetition, etc.), the alarm is activated.

When the semi-hard magnet is magnetized, the tag is activated. The magnetized strip makes the amorphous strip respond much more strongly to the detectors, because the DC magnetic field given off by the strip offsets the magnetic anisotropy within the amorphous metal. The tag can also be deactivated by demagnetizing the strip, making the response small enough so that it will not be detected by the detectors.

AM tags are three dimensional plastic tags, much thicker than electro-magnetic strips and are thus seldom used for books. However, they are relatively inexpensive and have better detection rates (fewer false positives and false negatives) than magnetic tags.

Emtag-removed

Called Emtag by B&G International, this type tag is often attached to the inside of a plastic surround permanently attached to the power cords of hand tools and equipment.[2]

Radio frequency systems

RF label

Series 304 RF EAS label

These tags are essentially an LC tank circuit that has a resonance peak anywhere from 1.75 MHz to 9.5 MHz. The standard frequency for retail use is 8.2 MHz. Sensing is achieved by sweeping around the resonant frequency and detecting the dip.

Deactivation for 8.2 MHz label tags is typically achieved using a deactivation pad. In the absence of such a device, labels can be rendered inactive by punching a hole, or by covering the circuit with a metallic label, a "detuner". The deactivation pad functions by partially destroying the capacitor. Though this sounds violent, in reality, both the process and the result are unnoticeable to the naked eye. The deactivator causes a micro short circuit in the label. This is done by submitting the tag to a strong electromagnetic field at the resonant frequency, which induces voltages exceeding the capacitor's breakdown voltage.

In terms of deactivation Radio Frequency is the most efficient of the 3 technologies (RF, EM, AM - there are no microwave labels) given that the reliable "remote" deactivation distance can be up to 30 cm. It also benefits the user in terms of running costs since the RF de-activator only activates to send a pulse when a circuit is present. Both EM and AM deactivation units are on all the time and consume considerably more electricity. The reliability of "remote" deactivation (i.e. non contact or non proximity deactivation) capability makes for a fast and efficient throughput at the checkout.

Efficiency is an important factor when choosing an overall EAS solution given that time lost attempting to deactivate labels can be an important drag of cashier productivity as well as customer satisfaction if unwanted alarms are caused by tags that have not been effectively deactivated at the point of sale.

Deactivation of RF labels is also dependent on the size of the label and the power of the deactivation pad (the larger the label, the greater the field it generates for deactivation to take place. For this reason very small labels can cause issues for consistent deactivation). It is common to find RF deactivation built into barcode flat and vertical scanners at the POS in food retail especially in Europe and Asia where RF EAS technology has been the standard for nearly a decade. In apparel retail deactivation usually takes the form of flat pads of approx. 30x30 cm.

Microwave systems

These permanent tags are made of a non-linear element (a diode) coupled to one microwave and one electrostatic antenna. At the exit, one antenna emits a low-frequency (about 100 kHz) field, and another one emits a microwave field. The tag acts as a mixer re-emitting a combination of signals from both fields. This modulated signal triggers the alarm. These tags are permanent and somewhat costly. They are mostly used in clothing stores and have practically been withdrawn from use.

Source tagging

Source tagging is the application of EAS security tags at the source, the supplier or manufacturer, instead of at the retail side of the chain. For the retailer, source tagging eliminates the labor expense needed to apply the EAS tags themselves, and reduces the time between receipt of merchandise and when the merchandise is ready for sale. For the supplier, the main benefit is the preservation of the retail packaging aesthetics by easing the application of security tags within product packaging. Source tagging allows the EAS tags to be concealed and more difficult to remove.

The high-speed application of EAS labels, suited for commercial packaging processes, was perfected via modifications to standard pressure-sensitive label applicators and was developed and introduced by Craig Patterson, initially for Hewlett Packard print cartridges. Today, consumer goods are source tagged at high speeds with the EAS label incorporated into the packaging or the product itself.

The most common source tags are AM strips and 8.2 MHz radio frequency labels. Most manufacturers use both when source tagging in the USA. In Europe there is little demand for AM tagging given that the Food and Department Store environments are dominated by RF technology.

Tag pollution

One significant problem from source tagging is something called "tag pollution" caused when non-deactivated tags carried around by customers cause unwanted alarms, decreasing the effectiveness and integrity of the EAS system. The problem is that no store has more than one system. Therefore, if a store actually has an anti-shoplifting system to deactivate a label they will only deactivate the one that is part of their system. If a store does not use an EAS system, they will not deactivate any tags at all. This is often the reason why people trigger an alarm entering a store, which can cause great frustration for both customers and staff. The problem is most evident in shopping malls where customers wander between stores. Retailers who use types of loss-prevention systems other than AM or 8.2 MHz radio frequency systems will not be as affected by "tag pollution".

Discussion

Occasional versus professional shoplifters

EAS systems can provide a solid deterrent against casual theft. The occasional shoplifter, not being familiar with these systems and their mode of operation, will either get caught by them, or preferably, will be dissuaded from attempting any theft in the first place.

Informed shoplifters are conscious of how tags can be removed or deactivated. A common method of defeating RF tags is the use of so-called booster bags. These are typically large paper bags as used by high street retailers that have been lined with multiple layers of aluminium foil to effectively shield the RF label from detection, much like a faraday cage. A simile would be the loss of signal that a cell phone suffers inside an elevator, the electro-magnetic, or radio, waves are effectively blocked, reducing the ability to send or receive information.

However, they may miss some tags or be unable to remove or deactivate all of them, especially if concealed or integrated tags are used. As a service to retailers, many manufacturers integrate security tags in the packaging of their products, or even inside the product itself, though this is rare and not especially desirable either for the retailer or the manufacturer. The practical totality of EAS labels are discarded with the product packaging. This is of particular application in everyday items that consumers might carry on their person to avoid the inconvenience of potentially live reactivated EAS tags when walking in and out of retail stores.

Hard Tags, typically used for clothing or Ink Tags, known as benefit denial tags, may reduce the rate of tag manipulation. Also, deactivating or detaching tags may be spotted by the shop staff.

Shoplifting tools are illegal in many jurisdictions, and can, in any case, serve as evidence against the perpetrators. Hence, informed shoplifters, although they decrease their risk of being caught by the EAS, expose themselves to much greater judicial risks if they get caught with tools, booster bags, or while trying to remove tags, as this characterizes intent to steal.

The possession of shoplifting tools (e.g. lined bags or wire cutters to cut bottle tags) can lead to the suspect being arrested for suspicion of theft or "Going equipped for stealing, etc." within the UK judicial system.

In summary, while even the least expensive EAS systems will catch most occasional shoplifters, a broader range of measures are still required for an effective response that can protect profits without impeding sales.

Tags containing alarms

Tags can be equipped with a build-in alarms which sound when the tag detects tampering or unauthorized removal from the store. The tag not only triggers the store's electronic article surveillance system, but also sounds an alarm attached to the merchandise. The local alarm continues to sound for several minutes after leaving the store, attracting attention to the shopper carrying the merchandise.

Installation costs

A single EAS detector, suitable for a small shop, is accessible to all retail stores, and should form a part of any coherent loss or profit protection system.

Disposable tags cost a matter of cents and may have been embedded during manufacture. More sophisticated systems are available, which are more difficult to circumvent. These solutions tend to be product category specific as in the case of high value added electronics and consumables, in consequence they are more expensive. Examples are "Safers", transparent secure boxes that completely enclose the article to be protected, Spiders that wrap around packaging and Electronic Merchandise Security Systems that allow phones and tablets to be used securely in the store before purchase. All of these require specific detachers or electronic keys at the Point Of Sale. They have the advantage of being reusable and being a strong visual deterrent to potential theft.

Tag Orientation

Except for microwave, the detection rate for all these tags depends on their orientation relative to the detection loops. For a pair of planar loops forming a Helmholtz coil, magnetic field lines will be approximately parallel in their center. Orienting the tag so that no magnetic flux from the coils crosses them will prevent detection, as the tag won't be coupled to the coils. This shortcoming, documented in the first EAS patents, can be solved by using multiple coils or by placing them in another arrangement such as a figure-of-eight. Sensitivity will still be orientation-dependent but detection will be possible at all orientations.

Detaching

A detacher is used to remove re-usable hard tags. The type of detacher used will depend on the type of tag. There are a variety of detachers available, with the majority using powerful magnets. Any store that uses an anti-shoplifting system and has a detacher should take care to keep it secured such that it cannot be removed. Some detachers actually have security tags inside them, to alert store personnel of them being removed from (or being brought into) the store. With greater frequency stores have metal detectors at the entrance that can warn against the presence of booster bags or illegal detachers.

Electro-magnetic activation and deactivation

Deactivation of magnetic tags is achieved by straightforward magnetization using a strong magnet. Magneto-acoustic tags require demagnetization. However, sticking a powerful magnet on them will bias disposable magnetic tags and prevent resonance in magneto-acoustic tags. Similarly, sticking a piece of metal, such as a large coin on a disposable radio-frequency tag will shield it. Non-disposable tags require stronger magnets or pieces of metal to disable or shield since the strips are inside the casing and thus further away. Deactivation of some EAS tags can trigger signals sent to the cashier alerting them.

Shielding

Most systems can be circumvented by placing the tagged goods in a bag lined with aluminum foil. The booster bag will act as a Faraday cage, shielding the tags from the antennas. Although some vendors claim that their acousto-magnetic systems cannot be defeated by bags shielded with aluminum foil, a sufficient amount of shielding (in the order of 30 layers of standard 20 µm foil) will defeat all standard systems.

Although the amount of shielding required depends on the system, its sensitivity, and the distance and orientation of the tags relative to its antennas, total enclosure of tags is not strictly necessary. Indeed, some shoplifters use clothes lined with aluminum foil. Low-frequency magnetic systems will require more shielding than radio-frequency systems due to their use of near-field magnetic coupling. Magnetic shielding, with steel or mu-metal, would be more effective, but also cumbersome and expensive.

The shielding technique is well-known amongst shoplifters and store owners. Some countries have specific laws against it. In any case, possession of such a bag demonstrates a prior-intent to commit a crime, which in many jurisdictions raises shoplifting from misdemeanor to felony status, as they are considered a "burglary tool."

To deter the use of booster bags, some stores have add-on metal detector systems which sense metallic surfaces.

Jamming

Like most systems that rely on transmission of electromagnetic signals through a hostile medium, EAS sensors can be rendered inoperative by jamming. As the signals from tags are very low-power (their cross-section is small, and the exits are wide), jamming requires little power. Evidently, shoplifters will not feel the need to follow radio transmission regulations; hence crude, easy-to-build transmitters will be adequate for them. However, due to their high frequency of operation, building a jammer can be difficult for microwave circuits; these systems are therefore less likely to be jammed. Although jamming is easy to perform, it is also easy to detect. A simple firmware upgrade should be adequate for modern DSP-based EAS systems to detect jamming. Nevertheless, the vast majority of EAS systems do not currently detect jamming.

Interference and health issues

All electronic article surveillance systems emit electromagnetic energy and thus can interfere with electronics.

Magneto-harmonic systems need to bring the tags to magnetic saturation and thus create magnetic fields strong enough to be felt through a small magnet. They routinely interfere with CRT displays. Demagnetization-remagnetization units also create intense fields.

Acousto-magnetic systems use less power but their signals are pulsed in the 100 Hz range.

Radio-frequency systems tend to be the least interfering because of their lower power and operating frequency in the MHz range, which makes it easy to shield against.

A March 2007 study by the Mayo Clinic in Rochester, Minnesota reported instances where acousto-magnetic EAS systems located at the front of retail stores caused a pacemaker to fail and a defibrillator to trigger, shocking the persons they were implanted in.

There are also concerns that some installations are intentionally reconfigured to exceed the rated specifications of the manufacturer, thereby exceeding tested and certified magnetic field levels.

Patents

Radio-frequency systems have the most manufacturers because they are not covered by patents, use well-known technology derived from radio communications, use little power, and can be manufactured without expensive metal alloys. There are exceptions however for example; a patented die-cut circuit manufacturing process is held by Miyake Inc. of Japan. Also, patents have recently been appearing for various combination tag designs for integration of both RF and RFID. The last known patent is the "Global Guard" by Argos Global, an EAS system that integrates video surveillance hidden inside pedestals, getting a close up of potential thieves.

Until recently, acousto-magnetic systems were covered by now-expired patents held by Sensormatic. WG Security Products, Inc. won a court battle against Sensormatic clarifying that WG Security Products acousto-magnetic systems did not infringe any Sensormatic patents. Disposable acousto-magnetic tags require special metal alloys; non-disposable ones require more expensive ferrite cores.

Effects on theft

A 2017 review study found that "based on the available evidence it is difficult to determine the effectiveness of tags as a theft reduction measure, albeit there is suggestive evidence that more visible tags are associated with greater reductions in theft than less visible tags".

See also

• Active packaging
• Radio-frequency identification
• Barkhausen effect
• Tattle-Tape

External links

• HowStuffWorks: How Anti-shoplifting Devices Work
• Back to Base Security