- published: 21 Dec 2013
- views: 95580
Create your page here
-
remove the playlistAbaqus
- remove the playlistAbaqus
back to playlist
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data from this analysis. The model is then simply animated. Using Abaqus 6.13-1.
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies.
- published: 25 Jun 2013
- views: 37273
Impact of a bullet to a thick plate with Damage and Elements deletion
Based on "Aluminum plate perforation : a comparative case study using lagrange with erosion, multi-material ALE and smooth perticle hydrodynamics -- Leonard E Schwer -- Schwer Engineering & Consulting Services Windsor, CA USA"
- published: 23 Aug 2013
- views: 62064
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included).
The material used is Aluminum.
Subscribe for more ABAQUS and FEA tutorials.
- published: 15 Apr 2015
- views: 12696
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace.
- published: 19 Oct 2015
- views: 2717
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！
Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊界條件的內容。
Part 2: https://youtu.be/BAiFT-YvxLM
Part 3: https://youtu.be/1wkIjqwer8s
【Webinar 線上課程】http://www.simutech.com.tw/webinar.php
【Abaqus教育訓練課程】http://www.simutech.com.tw/training-list.php
- published: 31 Mar 2015
- views: 4631
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Shell meshes and partitions are realized in the Mesh Module
4. A distributing coupling (~RBE3) is defined in the Interaction Module
5. Contact Pairs are defined in the Interaction Module
6. Different steps are created in the Step Module to apply contact
7. The preprocessing is achived in the Load Module
8. The simulation results are analysed in Abaqus/Viewer
- published: 01 Oct 2015
- views: 2362
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) quality
- published: 24 Aug 2015
- views: 5161
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface contact properties are used to ensure that parts do not intersect. The STATUS field output is used to remove the failed cohesive elements.
- published: 26 Feb 2015
- views: 17116
Abaqus FEA (formerly ABAQUS) is a suite of software applications for finite element analysis and computer-aided engineering, originally released in 1978. The name and logo of this software is derived from abacus and the Greek word, “abax” (ἄβαξ), meaning “board covered with sand”[citation needed].
The Abaqus product suite consists of four core software products:
The Abaqus products use the open-source scripting language Python for scripting and customization. Abaqus/CAE uses the fox-toolkit for GUI development.
Abaqus is used in the automotive, aerospace, and industrial products industries. The product is popular with academic and research institutions due to the wide material modeling capability, and the program's ability to be customized. Abaqus also provides a good collection of multiphysics capabilities, such as coupled acoustic-structural, piezoelectric, and structural-pore capabilities, making it attractive for production-level simulations where multiple fields need to be coupled.
Abaqus was initially designed to address non-linear physical behavior; as a result, the package has an extensive range of material models such as elastomeric (rubberlike) material capabilities.
This page contains text from Wikipedia, the Free Encyclopedia -
http://en.wikipedia.org/wiki/Abaqus
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
17:12Abaqus Contact Model Tutorial - Three Point Bend
Abaqus Contact Model Tutorial - Three Point BendAbaqus Contact Model Tutorial - Three Point Bend
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data from this analysis. The model is then simply animated. Using Abaqus 6.13-1. -
10:16ABAQUS Tutorial 1 : Plate with hole
ABAQUS Tutorial 1 : Plate with hole -
11:01ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimenABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies. -
10:36Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation StepsAbaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
Impact of a bullet to a thick plate with Damage and Elements deletion Based on "Aluminum plate perforation : a comparative case study using lagrange with erosion, multi-material ALE and smooth perticle hydrodynamics -- Leonard E Schwer -- Schwer Engineering & Consulting Services Windsor, CA USA" -
8:48Abaqus Tutorial 10 : Chip Formation Part1
Abaqus Tutorial 10 : Chip Formation Part1Abaqus Tutorial 10 : Chip Formation Part1
-
23:41Tube Crash Test Tutorial Using Abaqus 6.13
Tube Crash Test Tutorial Using Abaqus 6.13Tube Crash Test Tutorial Using Abaqus 6.13
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included). The material used is Aluminum. Subscribe for more ABAQUS and FEA tutorials. -
22:42Abaqus tutorial - Static Analysis of a T-joint
Abaqus tutorial - Static Analysis of a T-jointAbaqus tutorial - Static Analysis of a T-joint
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace. -
117:36【教學】Abaqus Basic基礎訓練課程Part 1
【教學】Abaqus Basic基礎訓練課程Part 1【教學】Abaqus Basic基礎訓練課程Part 1
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！ Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊界條件的內容。 Part 2: https://youtu.be/BAiFT-YvxLM Part 3: https://youtu.be/1wkIjqwer8s 【Webinar 線上課程】http://www.simutech.com.tw/webinar.php 【Abaqus教育訓練課程】http://www.simutech.com.tw/training-list.php -
41:45Abaqus - Contact modeling tutorial
Abaqus - Contact modeling tutorialAbaqus - Contact modeling tutorial
DPS Digital Product Simulation http://www.dps-fr.com/ Abaqus Abaqus/CAE 1. The whole geometry is created in Abaqus/CAE through the Part Module 2. An assembly is achived in the Assembly Module 3. Shell meshes and partitions are realized in the Mesh Module 4. A distributing coupling (~RBE3) is defined in the Interaction Module 5. Contact Pairs are defined in the Interaction Module 6. Different steps are created in the Step Module to apply contact 7. The preprocessing is achived in the Load Module 8. The simulation results are analysed in Abaqus/Viewer -
22:56Abaqus Mesh Pin and Mesh Convergence
Abaqus Mesh Pin and Mesh Convergence -
12:18Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) quality -
21:58Abaqus - Cohesive Elements & Tie Constraints Tutorial
Abaqus - Cohesive Elements & Tie Constraints TutorialAbaqus - Cohesive Elements & Tie Constraints Tutorial
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface contact properties are used to ensure that parts do not intersect. The STATUS field output is used to remove the failed cohesive elements. -
13:10Abaqus Tutorial- simulatation of element deletion in Abaqus
Abaqus Tutorial- simulatation of element deletion in AbaqusAbaqus Tutorial- simulatation of element deletion in Abaqus
In this example we will simulate tensile of a 3D circular bar and consequent necking and final fracture of the bar. -
23:22Abaqus - Aluminium Structural Stool subjected to a static load
Abaqus - Aluminium Structural Stool subjected to a static loadAbaqus - Aluminium Structural Stool subjected to a static load
DPS Digital Product Simulation http://www.dps-fr.com/ Abaqus Abaqus/CAE 1. The whole geometry is created in Abaqus/CAE through the Part Module 2. An assembly is achived in the Assembly Module 3. Partitions and the final Hexamesh are realized in the Mesh Module 4. A distributing coupling (~RBE3) and a ponctual mass are defined in the Interaction Module 5. The preprocessing is achived in the Load Module. 6. The simulation results are analysed in Abaqus/Viewer
- ABAQUS, Inc
- Aerospace
- AIX
- Automotive industry
- Backronym
- Commercial software
- Computing platform
- Dassault Systemes
- Elastomer
- Forbes
- Forbes.com
- Fox-toolkit
- GUI
- HP-UX
- IA-32
- IBM POWER
- Intel Itanium
- Linux
- Microsoft Windows
- Multiphysics
- Open-source
- Operating system
- Piezoelectric
- Proprietary software
- Software design
- Software developer
- Software license
- Wikipedia Link rot
- X86-64
-
Abaqus Contact Model Tutorial - Three Point Bend
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data from this analysis. The model is then simply animated. Using Abaqus 6.13-1. -
-
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies. -
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
Impact of a bullet to a thick plate with Damage and Elements deletion Based on "Aluminum plate perforation : a comparative case study using lagrange with erosion, multi-material ALE and smooth perticle hydrodynamics -- Leonard E Schwer -- Schwer Engineering & Consulting Services Windsor, CA USA" -
Abaqus Tutorial 10 : Chip Formation Part1
-
Tube Crash Test Tutorial Using Abaqus 6.13
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included). The material used is Aluminum. Subscribe for more ABAQUS and FEA tutorials. -
Abaqus tutorial - Static Analysis of a T-joint
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace. -
【教學】Abaqus Basic基礎訓練課程Part 1
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！ Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊界條件的內容。 Part 2: https://youtu.be/BAiFT-YvxLM Part 3: https://youtu.be/1wkIjqwer8s 【Webinar 線上課程】http://www.simutech.com.tw/webinar.php 【Abaqus教育訓練課程】http://www.simutech.com.tw/training-list.php -
Abaqus - Contact modeling tutorial
DPS Digital Product Simulation http://www.dps-fr.com/ Abaqus Abaqus/CAE 1. The whole geometry is created in Abaqus/CAE through the Part Module 2. An assembly is achived in the Assembly Module 3. Shell meshes and partitions are realized in the Mesh Module 4. A distributing coupling (~RBE3) is defined in the Interaction Module 5. Contact Pairs are defined in the Interaction Module 6. Different steps are created in the Step Module to apply contact 7. The preprocessing is achived in the Load Module 8. The simulation results are analysed in Abaqus/Viewer -
-
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) quality -
Abaqus - Cohesive Elements & Tie Constraints Tutorial
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface contact properties are used to ensure that parts do not intersect. The STATUS field output is used to remove the failed cohesive elements. -
Abaqus Tutorial- simulatation of element deletion in Abaqus
In this example we will simulate tensile of a 3D circular bar and consequent necking and final fracture of the bar. -
Abaqus - Aluminium Structural Stool subjected to a static load
DPS Digital Product Simulation http://www.dps-fr.com/ Abaqus Abaqus/CAE 1. The whole geometry is created in Abaqus/CAE through the Part Module 2. An assembly is achived in the Assembly Module 3. Partitions and the final Hexamesh are realized in the Mesh Module 4. A distributing coupling (~RBE3) and a ponctual mass are defined in the Interaction Module 5. The preprocessing is achived in the Load Module. 6. The simulation results are analysed in Abaqus/Viewer -
Abaqus tutorial - deep drawing
Aabqus tutorial - deep drawing The material used in our deep drawing analysis is steel with isotropic behavior. The initial position of the punch is taken as 10mm above the sheet. The Deep drawing speed used here is 1 m/sec. The friction between the sheet, the punch and die interface is taken constant as 0.15. The young modulus E is taken equal to 210GPa and the poisson’s ratio v =0.3. The density is equal to 7800kg/m2. A mass of 5 kg is attached to the blank holder, and a concentrated load of 10 kN, is applied to the contact surface blank/ holder, the blank holder is then allowed to move only in the vertical direction. Based on the symmetry boundary conditions, only a quarter of the geometry is modeled Mail : cmed.engineering@gmail.com -
17 exemples de simulations numériques par éléments finis (Abaqus)
Les exemples suivants ont été réalisés par les équipe d'EC2 Modélisation, à l'aide des solveurs implicites et explicites d'Abaqus : - crash d'une Toyota Yaris Sedan - crash d'un jet privé sur un mur en béton - pelleteuse - compression d'une bouteille en plastique - rupture d'un clip de sac à dos - engrenages - compression d'un ressort - impact d'une balle dans un mur - application du vent sur une enseigne - remplissage d'une citerne souple - amortisseur dynamique - propagation d'une fissure - simulation numérique du soudage - chute d'une balle dans un filet - tennis - hélice Pour plus d'informations, rendez-vous sur notre site internet : http://www.ec2-modelisation.fr/ -
Parametric Study in ABAQUS - first video
This video shows how to use parametric study in ABAQUS using PYTHON script. bahmani.mostafa@gmail.com -
Abaqus Tutorial - Pull Hinge
For zul: http://www.youtube.com/watch?v=M5Qm4xNXbMo -
Abaqus CAE- Step by step How to use the material damage in high velocity impact problem
Dear Abaqus Users, New Video on How to use damage material model using Abaqus CAE and Explicit Solver!! We have made this video to help Abaqus users to understand the how to use the damage in material and element deletion option in the Impact analysis performs in Abaqus Explicit. -Abaqus Acumen -
-
Abaqus Tutorial - Thermal Stress
Using the example of a fibre embedded in an epoxy/matrix, similar to what would be found in composite materials, a 158 degree temperature change is applied, simulating cooldown after composite laminate manufacture in an autoclave. The visualisation shows the stress concentrations at the boundaries between the different materials as a result of the mismatch between the expansion coefficients. -
Writing a Simple UMAT in ABAQUS -Second Video
bahmani.mostafa@gmail.com This video shows how to write and implement a simple user material in ABAQUS. -
Abaqus Topology Optimization of a Bridge
This tutorial deals with the optimization of a bridge in Abaqus starting from the division in design and nondesign space
Abaqus Contact Model Tutorial - Three Point Bend
- Order: Reorder
- Duration: 17:12
- Updated: 21 Dec 2013
- views: 95580
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data fro...
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data from this analysis. The model is then simply animated. Using Abaqus 6.13-1.
wn.com/Abaqus Contact Model Tutorial Three Point Bend
Using the example of a three point bend to show how to define contact between two objects in Abaqus. Also shown is how to extract the load/displacement data from this analysis. The model is then simply animated. Using Abaqus 6.13-1.
- published: 21 Dec 2013
- views: 95580
ABAQUS Tutorial 1 : Plate with hole
- Order: Reorder
- Duration: 10:16
- Updated: 25 Jun 2013
- views: 24712
Elastic calculation of a plate with hole in central. Compare numerical result with analytical result. Influence of MESH to numerical result.
Elastic calculation of a plate with hole in central. Compare numerical result with analytical result. Influence of MESH to numerical result.
wn.com/Abaqus Tutorial 1 Plate With Hole
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
- Order: Reorder
- Duration: 11:01
- Updated: 25 Jun 2013
- views: 37273
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies.
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies.
wn.com/Abaqus Tutorial 3 Frequency Dynamic Harmonic Loading On A Cylindric Fatigue Specimen
Modal Frequency of different deformation modes. Internal stress field correspond to Dynamic loading with different frequencies.
- published: 25 Jun 2013
- views: 37273
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
- Order: Reorder
- Duration: 10:36
- Updated: 23 Aug 2013
- views: 62064
Impact of a bullet to a thick plate with Damage and Elements deletion
Based on "Aluminum plate perforation : a comparative case study using lagrange with erosio...
Impact of a bullet to a thick plate with Damage and Elements deletion
Based on "Aluminum plate perforation : a comparative case study using lagrange with erosion, multi-material ALE and smooth perticle hydrodynamics -- Leonard E Schwer -- Schwer Engineering & Consulting Services Windsor, CA USA"
wn.com/Abaqus Tutorial 9 Impact Bullet Part1 Simulation Steps
Impact of a bullet to a thick plate with Damage and Elements deletion
Based on "Aluminum plate perforation : a comparative case study using lagrange with erosion, multi-material ALE and smooth perticle hydrodynamics -- Leonard E Schwer -- Schwer Engineering & Consulting Services Windsor, CA USA"
- published: 23 Aug 2013
- views: 62064
Abaqus Tutorial 10 : Chip Formation Part1
- Order: Reorder
- Duration: 8:48
- Updated: 24 Sep 2013
- views: 18845
- published: 24 Sep 2013
- views: 18845
Tube Crash Test Tutorial Using Abaqus 6.13
- Order: Reorder
- Duration: 23:41
- Updated: 15 Apr 2015
- views: 12696
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included).
The material used is Aluminum.
Subscribe for more ABAQUS and FEA tut...
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included).
The material used is Aluminum.
Subscribe for more ABAQUS and FEA tutorials.
wn.com/Tube Crash Test Tutorial Using Abaqus 6.13
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included).
The material used is Aluminum.
Subscribe for more ABAQUS and FEA tutorials.
- published: 15 Apr 2015
- views: 12696
Abaqus tutorial - Static Analysis of a T-joint
- Order: Reorder
- Duration: 22:42
- Updated: 19 Oct 2015
- views: 2717
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace.
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace.
wn.com/Abaqus Tutorial Static Analysis Of A T Joint
Full static analysis of a beam to column joint subjected to bending. Verification of the Force-Displacement curve at the end of the brace.
- published: 19 Oct 2015
- views: 2717
【教學】Abaqus Basic基礎訓練課程Part 1
- Order: Reorder
- Duration: 117:36
- Updated: 31 Mar 2015
- views: 4631
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！
Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊...
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！
Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊界條件的內容。
Part 2: https://youtu.be/BAiFT-YvxLM
Part 3: https://youtu.be/1wkIjqwer8s
【Webinar 線上課程】http://www.simutech.com.tw/webinar.php
【Abaqus教育訓練課程】http://www.simutech.com.tw/training-list.php
wn.com/【教學】Abaqus Basic基礎訓練課程Part 1
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系列課程哦！
Part 1 將會帶大家綜覽Abaqus/CAE，並依序了解Abaqus中零件、材料與斷面性質、組裝、分析步驟、輸出、載重與邊界條件的內容。
Part 2: https://youtu.be/BAiFT-YvxLM
Part 3: https://youtu.be/1wkIjqwer8s
【Webinar 線上課程】http://www.simutech.com.tw/webinar.php
【Abaqus教育訓練課程】http://www.simutech.com.tw/training-list.php
- published: 31 Mar 2015
- views: 4631
Abaqus - Contact modeling tutorial
- Order: Reorder
- Duration: 41:45
- Updated: 01 Oct 2015
- views: 2362
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An asse...
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Shell meshes and partitions are realized in the Mesh Module
4. A distributing coupling (~RBE3) is defined in the Interaction Module
5. Contact Pairs are defined in the Interaction Module
6. Different steps are created in the Step Module to apply contact
7. The preprocessing is achived in the Load Module
8. The simulation results are analysed in Abaqus/Viewer
wn.com/Abaqus Contact Modeling Tutorial
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Shell meshes and partitions are realized in the Mesh Module
4. A distributing coupling (~RBE3) is defined in the Interaction Module
5. Contact Pairs are defined in the Interaction Module
6. Different steps are created in the Step Module to apply contact
7. The preprocessing is achived in the Load Module
8. The simulation results are analysed in Abaqus/Viewer
- published: 01 Oct 2015
- views: 2362
Abaqus Mesh Pin and Mesh Convergence
- Order: Reorder
- Duration: 22:56
- Updated: 02 Mar 2013
- views: 49158
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
- Order: Reorder
- Duration: 12:18
- Updated: 24 Aug 2015
- views: 5161
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) qual...
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) quality
wn.com/Abaqus Turorial How Using Adaptive Mesh Will Helps To Get Accurate Results In Abaqus.
This video shows you how adaptive meshing could helps to get accurate result in the problems with highly deformation like forming. (With subtitle)-HD(720p) quality
- published: 24 Aug 2015
- views: 5161
Abaqus - Cohesive Elements & Tie Constraints Tutorial
- Order: Reorder
- Duration: 21:58
- Updated: 26 Feb 2015
- views: 17116
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface con...
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface contact properties are used to ensure that parts do not intersect. The STATUS field output is used to remove the failed cohesive elements.
wn.com/Abaqus Cohesive Elements Tie Constraints Tutorial
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined to the cohesive layer using tie constraints and surface to surface contact properties are used to ensure that parts do not intersect. The STATUS field output is used to remove the failed cohesive elements.
- published: 26 Feb 2015
- views: 17116
Abaqus Tutorial- simulatation of element deletion in Abaqus
- Order: Reorder
- Duration: 13:10
- Updated: 11 Oct 2015
- views: 4711
In this example we will simulate tensile of a 3D circular bar and consequent necking and final fracture of the bar.
In this example we will simulate tensile of a 3D circular bar and consequent necking and final fracture of the bar.
wn.com/Abaqus Tutorial Simulatation Of Element Deletion In Abaqus
In this example we will simulate tensile of a 3D circular bar and consequent necking and final fracture of the bar.
- published: 11 Oct 2015
- views: 4711
Abaqus - Aluminium Structural Stool subjected to a static load
- Order: Reorder
- Duration: 23:22
- Updated: 05 Dec 2013
- views: 14773
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An asse...
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Partitions and the final Hexamesh are realized in the Mesh Module
4. A distributing coupling (~RBE3) and a ponctual mass are defined in the Interaction Module
5. The preprocessing is achived in the Load Module.
6. The simulation results are analysed in Abaqus/Viewer
wn.com/Abaqus Aluminium Structural Stool Subjected To A Static Load
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whole geometry is created in Abaqus/CAE through the Part Module
2. An assembly is achived in the Assembly Module
3. Partitions and the final Hexamesh are realized in the Mesh Module
4. A distributing coupling (~RBE3) and a ponctual mass are defined in the Interaction Module
5. The preprocessing is achived in the Load Module.
6. The simulation results are analysed in Abaqus/Viewer
- published: 05 Dec 2013
- views: 14773
Abaqus tutorial - deep drawing
- Order: Reorder
- Duration: 18:39
- Updated: 17 Aug 2014
- views: 46783
Aabqus tutorial - deep drawing
The material used in our deep drawing analysis is steel with isotropic behavior. The initial position of the punch is taken...
Aabqus tutorial - deep drawing
The material used in our deep drawing analysis is steel with isotropic behavior. The initial position of the punch is taken as 10mm above the sheet. The Deep drawing speed used here is 1 m/sec. The friction between the sheet, the punch and die interface is taken constant as 0.15.
The young modulus E is taken equal to 210GPa and the poisson’s ratio v =0.3. The density is equal to 7800kg/m2.
A mass of 5 kg is attached to the blank holder, and a concentrated load of 10 kN, is applied to the contact surface blank/ holder, the blank holder is then allowed to move only in the vertical direction.
Based on the symmetry boundary conditions, only a quarter of the geometry is modeled
Mail : cmed.engineering@gmail.com
wn.com/Abaqus Tutorial Deep Drawing
Aabqus tutorial - deep drawing
The material used in our deep drawing analysis is steel with isotropic behavior. The initial position of the punch is taken as 10mm above the sheet. The Deep drawing speed used here is 1 m/sec. The friction between the sheet, the punch and die interface is taken constant as 0.15.
The young modulus E is taken equal to 210GPa and the poisson’s ratio v =0.3. The density is equal to 7800kg/m2.
A mass of 5 kg is attached to the blank holder, and a concentrated load of 10 kN, is applied to the contact surface blank/ holder, the blank holder is then allowed to move only in the vertical direction.
Based on the symmetry boundary conditions, only a quarter of the geometry is modeled
Mail : cmed.engineering@gmail.com
- published: 17 Aug 2014
- views: 46783
17 exemples de simulations numériques par éléments finis (Abaqus)
- Order: Reorder
- Duration: 3:52
- Updated: 14 Aug 2013
- views: 29230
Les exemples suivants ont été réalisés par les équipe d'EC2 Modélisation, à l'aide des solveurs implicites et explicites d'Abaqus :
- crash d'une Toyota Yaris ...
Les exemples suivants ont été réalisés par les équipe d'EC2 Modélisation, à l'aide des solveurs implicites et explicites d'Abaqus :
- crash d'une Toyota Yaris Sedan
- crash d'un jet privé sur un mur en béton
- pelleteuse
- compression d'une bouteille en plastique
- rupture d'un clip de sac à dos
- engrenages
- compression d'un ressort
- impact d'une balle dans un mur
- application du vent sur une enseigne
- remplissage d'une citerne souple
- amortisseur dynamique
- propagation d'une fissure
- simulation numérique du soudage
- chute d'une balle dans un filet
- tennis
- hélice
Pour plus d'informations, rendez-vous sur notre site internet : http://www.ec2-modelisation.fr/
wn.com/17 Exemples De Simulations Numériques Par Éléments Finis (Abaqus)
Les exemples suivants ont été réalisés par les équipe d'EC2 Modélisation, à l'aide des solveurs implicites et explicites d'Abaqus :
- crash d'une Toyota Yaris Sedan
- crash d'un jet privé sur un mur en béton
- pelleteuse
- compression d'une bouteille en plastique
- rupture d'un clip de sac à dos
- engrenages
- compression d'un ressort
- impact d'une balle dans un mur
- application du vent sur une enseigne
- remplissage d'une citerne souple
- amortisseur dynamique
- propagation d'une fissure
- simulation numérique du soudage
- chute d'une balle dans un filet
- tennis
- hélice
Pour plus d'informations, rendez-vous sur notre site internet : http://www.ec2-modelisation.fr/
- published: 14 Aug 2013
- views: 29230
Parametric Study in ABAQUS - first video
- Order: Reorder
- Duration: 25:29
- Updated: 03 Jul 2015
- views: 4974
This video shows how to use parametric study in ABAQUS using PYTHON script.
bahmani.mostafa@gmail.com
This video shows how to use parametric study in ABAQUS using PYTHON script.
bahmani.mostafa@gmail.com
wn.com/Parametric Study In Abaqus First Video
This video shows how to use parametric study in ABAQUS using PYTHON script.
bahmani.mostafa@gmail.com
- published: 03 Jul 2015
- views: 4974
Abaqus Tutorial - Pull Hinge
- Order: Reorder
- Duration: 17:25
- Updated: 02 Jan 2013
- views: 31306
For zul: http://www.youtube.com/watch?v=M5Qm4xNXbMo
For zul: http://www.youtube.com/watch?v=M5Qm4xNXbMo
wn.com/Abaqus Tutorial Pull Hinge
Abaqus CAE- Step by step How to use the material damage in high velocity impact problem
- Order: Reorder
- Duration: 18:20
- Updated: 02 Feb 2016
- views: 1043
Dear Abaqus Users,
New Video on How to use damage material model using Abaqus CAE and Explicit Solver!! We have made this video to help Abaqus users to understa...
Dear Abaqus Users,
New Video on How to use damage material model using Abaqus CAE and Explicit Solver!! We have made this video to help Abaqus users to understand the how to use the damage in material and element deletion option in the Impact analysis performs in Abaqus Explicit.
-Abaqus Acumen
wn.com/Abaqus Cae Step By Step How To Use The Material Damage In High Velocity Impact Problem
Dear Abaqus Users,
New Video on How to use damage material model using Abaqus CAE and Explicit Solver!! We have made this video to help Abaqus users to understand the how to use the damage in material and element deletion option in the Impact analysis performs in Abaqus Explicit.
-Abaqus Acumen
- published: 02 Feb 2016
- views: 1043
ABAQUS Tutorial | Stress Analysis of Railroad with Wheel | Quasi-static | 15-2 | BWEngineering
- Order: Reorder
- Duration: 8:07
- Updated: 03 Feb 2015
- views: 6360
ABAQUS Tutorial Part 1: Stress Analysis of Railroad with Wheel
Part 2. https://www.youtube.com/watch?v=Pkcag28Osu0
ABAQUS Tutorial Part 1: Stress Analysis of Railroad with Wheel
Part 2. https://www.youtube.com/watch?v=Pkcag28Osu0
wn.com/Abaqus Tutorial | Stress Analysis Of Railroad With Wheel | Quasi Static | 15 2 | Bwengineering
Abaqus Tutorial - Thermal Stress
- Order: Reorder
- Duration: 8:14
- Updated: 16 Apr 2014
- views: 22868
Using the example of a fibre embedded in an epoxy/matrix, similar to what would be found in composite materials, a 158 degree temperature change is applied, sim...
Using the example of a fibre embedded in an epoxy/matrix, similar to what would be found in composite materials, a 158 degree temperature change is applied, simulating cooldown after composite laminate manufacture in an autoclave. The visualisation shows the stress concentrations at the boundaries between the different materials as a result of the mismatch between the expansion coefficients.
wn.com/Abaqus Tutorial Thermal Stress
Using the example of a fibre embedded in an epoxy/matrix, similar to what would be found in composite materials, a 158 degree temperature change is applied, simulating cooldown after composite laminate manufacture in an autoclave. The visualisation shows the stress concentrations at the boundaries between the different materials as a result of the mismatch between the expansion coefficients.
- published: 16 Apr 2014
- views: 22868
Writing a Simple UMAT in ABAQUS -Second Video
- Order: Reorder
- Duration: 19:10
- Updated: 20 Aug 2015
- views: 4436
bahmani.mostafa@gmail.com
This video shows how to write and implement a simple user material in ABAQUS.
bahmani.mostafa@gmail.com
This video shows how to write and implement a simple user material in ABAQUS.
wn.com/Writing A Simple Umat In Abaqus Second Video
bahmani.mostafa@gmail.com
This video shows how to write and implement a simple user material in ABAQUS.
- published: 20 Aug 2015
- views: 4436
Abaqus Topology Optimization of a Bridge
- Order: Reorder
- Duration: 25:33
- Updated: 05 Jan 2015
- views: 10773
This tutorial deals with the optimization of a bridge in Abaqus starting from the division in design and nondesign space
This tutorial deals with the optimization of a bridge in Abaqus starting from the division in design and nondesign space
wn.com/Abaqus Topology Optimization Of A Bridge
This tutorial deals with the optimization of a bridge in Abaqus starting from the division in design and nondesign space
- published: 05 Jan 2015
- views: 10773
close fullscreen
- Playlist
- Chat
close fullscreen
- Playlist
- Chat
17:12
Abaqus Contact Model Tutorial - Three Point Bend
Using the example of a three point bend to show how to define contact between two objects ...
published: 21 Dec 2013
Abaqus Contact Model Tutorial - Three Point Bend
Abaqus Contact Model Tutorial - Three Point Bend
- Report rights infringement
- published: 21 Dec 2013
- views: 95580
10:16
ABAQUS Tutorial 1 : Plate with hole
Elastic calculation of a plate with hole in central. Compare numerical result with analyti...
published: 25 Jun 2013
ABAQUS Tutorial 1 : Plate with hole
ABAQUS Tutorial 1 : Plate with hole
- Report rights infringement
- published: 25 Jun 2013
- views: 24712
11:01
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
Modal Frequency of different deformation modes. Internal stress field correspond to Dynami...
published: 25 Jun 2013
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic loading on a cylindric fatigue specimen
- Report rights infringement
- published: 25 Jun 2013
- views: 37273
10:36
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
Impact of a bullet to a thick plate with Damage and Elements deletion
Based on "Aluminum p...
published: 23 Aug 2013
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
Abaqus Tutorial 9 : Impact bullet - Part1 : Simulation Steps
- Report rights infringement
- published: 23 Aug 2013
- views: 62064
8:48
Abaqus Tutorial 10 : Chip Formation Part1
published: 24 Sep 2013
Abaqus Tutorial 10 : Chip Formation Part1
Abaqus Tutorial 10 : Chip Formation Part1
- Report rights infringement
- published: 24 Sep 2013
- views: 18845
23:41
Tube Crash Test Tutorial Using Abaqus 6.13
A simple crash test tutorial on an empty circular tube using ABAQUS (Voice Over Included)....
published: 15 Apr 2015
Tube Crash Test Tutorial Using Abaqus 6.13
Tube Crash Test Tutorial Using Abaqus 6.13
- Report rights infringement
- published: 15 Apr 2015
- views: 12696
22:42
Abaqus tutorial - Static Analysis of a T-joint
Full static analysis of a beam to column joint subjected to bending. Verification of the F...
published: 19 Oct 2015
Abaqus tutorial - Static Analysis of a T-joint
Abaqus tutorial - Static Analysis of a T-joint
- Report rights infringement
- published: 19 Oct 2015
- views: 2717
117:36
【教學】Abaqus Basic基礎訓練課程Part 1
本系列課程將Abaqus Basic基礎訓練課程從實體教室搬上雲端，不論是在辦公室、研究室或是在家中，都可以遠端學習Abaqus的基礎。若您是Abaqus的初學者，千萬不要錯過本系...
published: 31 Mar 2015
【教學】Abaqus Basic基礎訓練課程Part 1
【教學】Abaqus Basic基礎訓練課程Part 1
- Report rights infringement
- published: 31 Mar 2015
- views: 4631
41:45
Abaqus - Contact modeling tutorial
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whol...
published: 01 Oct 2015
Abaqus - Contact modeling tutorial
Abaqus - Contact modeling tutorial
- Report rights infringement
- published: 01 Oct 2015
- views: 2362
22:56
Abaqus Mesh Pin and Mesh Convergence
Meshing a pin in Abaqus using Swept Wedge Elements and a very simple mesh convergence exam...
published: 02 Mar 2013
Abaqus Mesh Pin and Mesh Convergence
Abaqus Mesh Pin and Mesh Convergence
- Report rights infringement
- published: 02 Mar 2013
- views: 49158
12:18
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
This video shows you how adaptive meshing could helps to get accurate result in the proble...
published: 24 Aug 2015
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
Abaqus Turorial-How using adaptive mesh will helps to get accurate results in Abaqus.
- Report rights infringement
- published: 24 Aug 2015
- views: 5161
21:58
Abaqus - Cohesive Elements & Tie Constraints Tutorial
This tutorial shows a 2D model using cohesive elements pulled apart. The parts are joined ...
published: 26 Feb 2015
Abaqus - Cohesive Elements & Tie Constraints Tutorial
Abaqus - Cohesive Elements & Tie Constraints Tutorial
- Report rights infringement
- published: 26 Feb 2015
- views: 17116
13:10
Abaqus Tutorial- simulatation of element deletion in Abaqus
In this example we will simulate tensile of a 3D circular bar and consequent necking and f...
published: 11 Oct 2015
Abaqus Tutorial- simulatation of element deletion in Abaqus
Abaqus Tutorial- simulatation of element deletion in Abaqus
- Report rights infringement
- published: 11 Oct 2015
- views: 4711
23:22
Abaqus - Aluminium Structural Stool subjected to a static load
DPS Digital Product Simulation http://www.dps-fr.com/
Abaqus Abaqus/CAE
1. The whol...
published: 05 Dec 2013
Abaqus - Aluminium Structural Stool subjected to a static load
Abaqus - Aluminium Structural Stool subjected to a static load
- Report rights infringement
- published: 05 Dec 2013
- views: 14773
Abaqus Contact Model Tutorial - Three Point Bend...
ABAQUS Tutorial 1 : Plate with hole...
ABAQUS Tutorial 3 : Frequency - Dynamic Harmonic l...
Abaqus Tutorial 9 : Impact bullet - Part1 : Simula...
Abaqus Tutorial 10 : Chip Formation Part1...
Tube Crash Test Tutorial Using Abaqus 6.13...
Abaqus tutorial - Static Analysis of a T-joint...
【教學】Abaqus Basic基礎訓練課程Part 1...
Abaqus - Contact modeling tutorial...
Abaqus Mesh Pin and Mesh Convergence...
Abaqus Turorial-How using adaptive mesh will helps...
Abaqus - Cohesive Elements & Tie Constraints Tutor...
Abaqus Tutorial- simulatation of element deletion ...
Abaqus - Aluminium Structural Stool subjected to a...
Abaqus tutorial - deep drawing...
17 exemples de simulations numériques par éléments...
Parametric Study in ABAQUS - first video...
Abaqus Tutorial - Pull Hinge...
Abaqus CAE- Step by step How to use the material...
ABAQUS Tutorial | Stress Analysis of Railroad with...
Abaqus Tutorial - Thermal Stress...
Writing a Simple UMAT in ABAQUS -Second Video...
Abaqus Topology Optimization of a Bridge...
-
Lyrics list:text lyricsplay full screenplay karaoke
photo: AP / Carlos Osorio
‘Don’t Write Us Off,’ Bernie Sanders Says After Caucus Wins on Saturday
Edit New York Times 06 Mar 2016
In a telephone interview from Detroit, Bernie Sanders acknowledged having work to do with minority voters but said wins in Nebraska and Kansas gave him momentum ... ....
photo: AP / Wong Maye-E
Beijing not to permit Taiwan split from China: President Xi
Edit Press TV 06 Mar 2016
Chinese President Xi Jinping has warned Taiwan against any independence drive, saying Beijing will never give the self-ruled island nation permission to break off from the mainland. Xi made the remarks during a meeting with Shanghai delegates to the opening session of the annual National People’s Congress in Beijing on Saturday. ... ©AFP ... ....
photo: US Navy / MCS1 Peter D. Blair
First things to be raised if MH370 found: More questions
Edit Yahoo Daily News 06 Mar 2016
SYDNEY (AP) — If Malaysia Airlines Flight 370 is ever found, the wreckage will immediately present a host of new questions before it's likely to provide answers about the plane's disappearance nearly two years ago. What will be recovered? Who will pay for it? How much evidence has already been lost forever? Here are some key issues that will crop up if the plane is located.. ___. MUCH COULD REMAIN IN OCEAN ... ___. JOINT EFFORT ... ___ ... ....
photo: AP / Jun Dumaguing
North Korea ship impounded in Philippines as part of fresh sanctions
Edit CNN 05 Mar 2016
(CNN)While North Korea keeps firing literal and figurative salvos, the world has responded with harsher sanctions -- ones that the Philippines has put into effect by detaining a ship from the reclusive East Asian nation ... This wouldn't have happened if not for Pyongyang's recent nuclear test and missile launch, and the global community's reaction to these defiant acts. The 15-member U.N ... Read More ... JUST WATCHED ... Replay. More Videos ... ....
« back to news headlines
Steel Plate Explosive Loading (Thornton Tomasetti Inc)
Edit Public Technologies 22 Feb 2016
(Source. Thornton Tomasetti Inc) ... Prof. Kim Nielsen and Rasmus Andersen in the Mechanical Engineering Department at the Technical University of Denmark have produced these videos using WAidam 1.1.9 in Abaqus. This sample problem shows a large, explosively-loaded steel plate ... - Pawel Woelke. Thornton Tomasetti Inc ... Original Document ... (noodl. 32234176) ....
Mentor Graphics Announces New Release of FloEFD Computational Fluid Dynamics Product
Edit Stockhouse 17 Dec 2015
... solver, a robust EDA interface, and an interface to Abaqus Finite Element Analysis (FEA) software for stress analysis....
Mentor Graphics Announces New Release of FloEFD Computational Fluid Dynamics Product (Mentor Graphics Corporation)
Edit Public Technologies 17 Dec 2015
(Source. Mentor Graphics Corporation) ... Updated features in this new version include improved mesh handling, an enhanced transient solver, a robust EDA interface, and an interface to Abaqus Finite Element Analysis (FEA) software for stress analysis ... in automotive lighting industry ... To support multi-disciplinary analysis, the FloEFD tool can now export pressure and thermal loads to Abaqus for further stress analysis ... Product Availability....
Brown names 12 campaign co-chairs (Brown University)
Edit Public Technologies 24 Oct 2015
(Source. Brown University). With a goal more than double the original goal of Brown's most ambitious campaign to date, BrownTogether will have the leadership of 12 campaign co-chairs, drawn from the ranks of the Brown Corporation and prominent alumni. PROVIDENCE, R.I. [Brown University] - On Friday, Oct ... The campaign co chairs. ... E ... E. Paul Sorensen retired as co-founder and director of ABAQUS Inc., formerly Hibbitt, Karlsson & Sorensen Inc....
3D Geometry Healing Technology Added to the Altair Partner Alliance Elysium has joined the program, enabling CADdoctor on the HyperWorks platform
Edit PR Newswire 07 Jul 2015
TROY, Mich. and HAMAMATSU, Japan, July 7, 2015 /PRNewswire/ -- Altair and Elysium Co. Ltd ... DEK can understand the characteristics, representations, tolerances, etc ... EDT and 3 p.m ... Ltd ... Elysium currently supports data exchange among ACIS, CADmeister, CATIA V4/V5/V6, Creo, Creo Elements/Direct, DELMIA, Inventor, JT, NX, I-DEAS NX, Parasolid, SIMULIA Abaqus, SolidWorks, Systema, 3D XML, XVL and the IGES, STEP and STL standards ... Ltd ... ....
MSC Software's MaterialCenter 2015 Release Delivers Material Data Integration (MSC Software Corporation)
Edit noodls 27 May 2015
(Source. MSC Software Corporation). NEWPORT BEACH, CA--(May 27, 2015) - MSC Software Corporation today announced the new release of MaterialCenter 2015. MaterialCenter 2015 is a truly out-of-the-box Material Process and Data Lifecycle Management solution with direct integration into CAE applications that engineers regularly use. Highlights of this release include.. CAE Material Model Support ... Nastran Marc Ansys Abaqus LS Dyna ... (noodl....
Abaqus' myGeoTracking Load Tracking Service Adds Proof of Delivery with GPS-Tagged Photo from Any Driver's Phone
Edit StreetInsider 30 Apr 2015M2 Technologies Hosts Mastering Finite Element Analysis Seminar
Edit PR Newswire 31 Mar 2015
The software-independent seminar will be focused on the application of FEA tools and provide expert tips for mastering its various features, including key concepts, boundary conditions, simplifying CAD, material properties and results interpretation ... He has worked with and instructed and/or consulted using CSA, MSC, NX and NEi Nastran, NEi Explicit MSC Dytran, MSC Marc, MSC Patran, ABAQUS, LS-Dyna, & FEMAP ... Contact. Kristin Prokop ... ....
The Second Regional Workshop on "The Role of Computer-Based Educational Laboratories in Nuclear Engineering University Programs" will be organized in Moscow (State Atomic Energy Corporation ROSATOM)
Edit noodls 03 Mar 2015
to discuss the role of special educational means and tools based on NPP computer-based simulators, virtual nuclear laboratories, Professional Nuclear Information Systems and Databases (JANIS, etc.); Professional computer programs for calculated simulation (ANSYS, Abaqus, etc.) in developing the required competences in the field of nuclear ......
MSC Software Announces a New Finite Element Analysis (FEA) Business Partner in Switzerland (MSC Software Corporation)
Edit noodls 20 Feb 2015
(Source. MSC Software Corporation) ... ELinter AG has significant expertise in engineering simulation software development and solutions. The new partnership will satisfy the increased demand for structural and numerical acoustic simulations in the region ... Patran connects the Computer Aided Design (CAD) world with analysis programs and has interfaces to all standard solvers such as MSC Nastran, Marc, Abaqus, LS-DYNA, ANSYS or Pam-Crash....
>myGeoTracking Customers Tap New Workforce Automation and Automatic Time & Attendance Features for Huge Payroll ...
Edit Seattle Post 26 Nov 2014
Abaqus, Inc., a provider of the ... “Our customers need to focus on their business, and rely on myGeoTracking to gather critical job performance and payroll information, which is why we’ve added layers of service intelligence that automate common management tasks across various industries,” said Shailendra Jain, CEO of Abaqus ... About Abaqus Inc....
M2 Technologies Hosts FEA Seminar
Edit PR Newswire 23 Sep 2014
NASHUA, N.H., Sept. 23, 2014 /PRNewswire/ -- Manufacturing design technology consultant M2 Technologies announced they are hosting a special seminar, "Mastering Finite Element Analysis (FEA)" on October 8th, 2014 ... He has worked with and instructed and/or consulted using CSA, MSC, NX and NEi Nastran, NEi Explicit MSC Dytran, MSC Marc, MSC Patran, ABAQUS, LS-Dyna, & FEMAP ... Contact. Kristin Prokop. Director of Marketing ... ....
>Abaqus Inc. Enhances myGeoTracking With Automatic Driver & Load Tracking Solution for Non-Asset Based Brokers ...
Edit Seattle Post 03 Sep 2014
Abaqus, Inc., a provider of the first-of-a-kind myGeoTracking cloud-hosted Mobile Workforce Management Solutions, today announced the launch of its new driver and load management service for non-asset based brokers and fleet managers using any cell phone to provide real-time and schedule-based tracking, driver-dispatcher messaging, and analytics ... About Abaqus Inc....
- 1
- 2
- 3
- 4
- 5
- Next page »
