'Joint' is featured as a movie character in the following productions:
Hell Ride (2008)
Actors:
Quentin Tarantino (producer),
Michael Madsen (actor),
Leonor Varela (actress),
Francesco Quinn (actor),
Vincent Rivera (actor),
Diana Prince (actress),
Eric Balfour (actor),
Diana Terranova (actress),
Eric Balfour (actor),
Michael Beach (actor),
Dennis Hopper (actor),
David Carradine (actor),
Vinnie Jones (actor),
Harvey Weinstein (producer),
Bob Weinstein (producer),
Genres:
Action,
Adventure,
Drama,
Thriller,
Taglines: The rebellion against all there is
Quotes:
Girl: Hey, what do those white wings mean?::Billy Wings: They're for licking virgin pussy. Red wings for licking a bleeding pussy. See that? Blue and yellow wings for licking a police woman. Green wings for licking a pussy with crabs. Purple wings... They're for licking a dead pussy... See that? Pill popping, cunt eating, dope smoking, mother fucker. But you know... in a good way.
Eddie Zero: Now give me a hand with this. Cause I got things to go and places to do.
Pistolero: What the hell made you think you could count on me?
The Savage Seven (1968)
Actors:
Mike Curb (composer),
Penny Marshall (actress),
James H. Nicholson (producer),
Dick Clark (producer),
Gary Kent (actor),
Samuel Z. Arkoff (producer),
Beach Dickerson (actor),
John 'Bud' Cardos (actor),
Eddy Donno (actor),
Richard Rush (director),
Billy Green Bush (actor),
Robert Walker Jr. (actor),
Larry Bishop (actor),
Adam Roarke (actor),
Charles Bail (actor),
Plot: Biker gang leader Kisum (Adam Roarke) loves waitress Marcia Little Hawk (Joanna Frank). Her brother Johnnie Little Hawk (Robert Walker, Jr.), the leader of a group of American Indians disapproves. At various times these two groups are adversaries and allies. The two groups join forces but crooked businessmen scheme to have them at each other's throats again. The theme song "Anyone for Tennis" is by Cream. The Iron Butterfly are heard playing their classic "Iron Butterfly Theme." Producer Dick Clark and director Richard Rush made "Psych-Out" earlier in the year.
Keywords: 1960s, battle, biker, biker-gang, independent-film, motorcycle, motorcycle-gang, native-american-reservation, number-in-title, revenge
Genres:
Drama,
Taglines: One for Each of the Deadly Sins...Blessed by the Devil Himself! Riding Like Outlaws of Another Day...Violent...Defiant! . . . Blessed by the Devil himself! [Australian daybill poster] . . . deadliest of all the violent breed [Australian daybill poster] Violent in anger. Savage in love . . . . Defiant in play!! [Australian daybill poster] The roar of their pipes is their battle cry... the open road their killing ground!
The Wild Angels (1966)
Actors:
James H. Nicholson (producer),
Diane Ladd (actress),
Roger Corman (producer),
Joan Shawlee (actress),
Norman Alden (actor),
Peter Bogdanovich (actor),
Samuel Z. Arkoff (producer),
Peter Fonda (actor),
Frank Gerstle (actor),
Art Baker (actor),
Dick Miller (actor),
Michael J. Pollard (actor),
Bruce Dern (actor),
Buck Taylor (actor),
Peter Bogdanovich (writer),
Plot: Peter Fonda plays 'Heavenly Blues', the leader of Hell's Angels chapter from Venice, California while Bruce Dern plays 'Loser', his best pal. When they both botch their attempt to retrieve Loser's stolen bike, Loser ends up in the hospital. When the Angels bust him out, he dies, and they bury him. Nancy Sinatra plays Mike, Blues' "old lady" and Diane Ladd plays Loser's wife (Dern's real-life wife at the time). The plot is basically a buildup to the last half-hour of the film in which Loser's funeral becomes another wild party.
Keywords: attempted-rape, b-movie, bare-chested-male, beer-drinking, bereavement, biker, biker-gang, billiard-game, blonde, blouse-ripped-open
Genres:
Action,
Drama,
Taglines: Their credo is violence...Their God is hate...and they call themselves 'The Wild Angels' Their credo is violence... Their God is hate... The most terrifying film of your time!
Quotes:
Heavenly Blues: We wanna be free! We wanna be free to do what we wanna do. We wanna be free to ride. We wanna be free to ride our machines without being hassled by The Man! ... And we wanna get loaded. And we wanna have a good time. And that's what we are gonna do. We are gonna have a good time... We are gonna have a party.
Medic: [said jokingly to girl dancing] Hey, don't get none of that on me!
Mike: [cops are coming] Let's get out of here, Blues!::Heavenly Blues: There's nowhere to go.
-
How To Roll The Perfect Joint. Every Time.
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in Oregon, where recreational marijuana was legalized in 2015. Given all that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on Facebook: https://www.facebook.com/Vocativ
published: 02 Aug 2016
-
How to Roll a Fatass Twax Joint - Rolling with Dutch
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
published: 30 Jan 2017
-
Baked - Episode 9: How to Joint
For licensing and media inquiries, go to http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
published: 16 Apr 2015
-
The Artist Behind The World's Greatest Joints
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on Facebook: https://www.facebook.com/Vocativ
published: 02 Aug 2016
-
Smoking a Joint
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook: http://www.facebook.com/theTHCtemple
published: 26 Mar 2017
-
How To Roll 5 Types of Joints (Basic, Tipped, Cone, Backrolled & Oversized): Cannabasics #49
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a Basic Doobie, a Tipped joint, a Cone joint, a Backrolled joint & an oversized joint. Save 10% in the RuffHouse Smoke Shop with the code: "CANNABASICS": http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic Joint (Doobie): Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers length...
published: 14 Mar 2017
-
$40 JOINT!!!!!!!!
18+older. We stuff $40 worth of Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw 12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus Harry Dabs and I each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆ SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
published: 14 Apr 2016
-
President Trump Holds a Joint Press Conference with Prime Minister Gentiloni
The White House
published: 20 Apr 2017
-
3 suspected gangster's arrested in STF and police's joint operation
ਜਲੰਧਰ 'ਚ STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
published: 22 Apr 2017
-
A GIANT HALF POUND Jamaican Joint
18+ Adult Information and Entertainment
Good Video? Like/Fave & Share!
http://coralcovejamaica.com/
-------------------------------------------------------------------------
Want to purchase my nutrients?
➜ http://www.remonutrients.com/
Like my page on Facebook:
➜ https://www.facebook.com/theUrbanGrower
Follow me on Twitter:
➜ http://twitter.com/theurbangrower
Follow me on Instagram
➜ http://instagram.com/theurbangrower
published: 13 Apr 2017
-
Rambo Joint GTL
published: 07 Nov 2013
-
How to Smoke a Joint
Milos Forman - Taking Off (1971)
published: 08 Jul 2014
-
NATO Joint ISR
Doing this Info movie together with the nice belgian gentlemen from "labrats.be" for NATO.
credits:
cd: Jean Pourveur
direction , design, animation : Kay Tennemann
additional 3D: Marijn Raeven, Filip Lange
musik & sfx : Janosch Groth / FONOMEN
published: 23 Oct 2014
-
Joint Studies Mandy004
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
published: 20 Aug 2011
-
Joint Chain Examples
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
published: 19 Jun 2010
-
TSB Campaign: 'The Story'
A 2.5min film for TSB - commissioned by JOINT LONDON - about the Reverend Henry Duncan and the history behind the building of the TSB bank. Combining the hand crafted artistry of 2D character animation within a stunningly integrated use of 3D CGI sets, The journey through time is reflected in the film's opening shot; an unbroken take which lasts a whopping 95 seconds...
Our campaign for the newly independent TSB continues ...
Client: TSB
Agency: JOINT LONDON
Director: MARC CRASTE
Production Company: STUDIO AKA
Music: ANNE DUDLEY
Narration: PATRICK STEWART
Sound Design: FACTORY
thestudio@studioaka.co.uk
published: 10 Sep 2013
-
The Furniture Joint w/Chad Parkinson
Furniture by:
Chad Parkinson
Thefurniturejoint@gmail.com
www.thefurniture-joint.com
IG - @thefurniturejoint
Music by:
Aaronbollschweiler@hotmail.com
published: 30 May 2014
-
Joint Chains, Spiral Growth, Iterative Hierarchies, & the Golden Section
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation... so please, feel free to comment.
:)
published: 10 Jun 2010
-
Joint Ops - Brazil
In the second instalment of NA BLEND's JOINT OPS series we join Eric Rienstra, Craig Cunningham, Sam Medysky, and Brandon Scheid for some action packed sessions in the Northeast of Brazil.
Edit : http://vincentbergeron.ca
http://www.slingshotsports.com
http://www.northkites.com
http://www.bestkiteboarding.com
http://liquidforcekites.com
published: 09 Mar 2014
-
VB Joint & Helper Study
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the Level 03 render, you can see on the lower...
published: 27 Jun 2014
How To Roll The Perfect Joint. Every Time.
videos
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/
...
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in
Oregon, where recreational marijuana was legalized in
2015. Given all
that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
https://wn.com/How_To_Roll_The_Perfect_Joint._Every_Time.
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in
Oregon, where recreational marijuana was legalized in
2015. Given all
that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
- published: 02 Aug 2016
- views: 654588
How to Roll a Fatass Twax Joint - Rolling with Dutch
videos
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soe
...
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
https://wn.com/How_To_Roll_A_Fatass_Twax_Joint_Rolling_With_Dutch
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
- published: 30 Jan 2017
- views: 582692
Baked - Episode 9: How to Joint
videos
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree
...
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on
Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
https://wn.com/Baked_Episode_9_How_To_Joint
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on
Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
- published: 16 Apr 2015
- views: 664345
The Artist Behind The World's Greatest Joints
videos
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can
...
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
https://wn.com/The_Artist_Behind_The_World's_Greatest_Joints
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
- published: 02 Aug 2016
- views: 1054944
Smoking a Joint
videos
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter
....
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook:
http://www.facebook.com/theTHCtemple
https://wn.com/Smoking_A_Joint
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook:
http://www.facebook.com/theTHCtemple
- published: 26 Mar 2017
- views: 4826
How To Roll 5 Types of Joints (Basic, Tipped, Cone, Backrolled & Oversized): Cannabasics #49
videos
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & a
...
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & an oversized joint.
Save 10% in the RuffHouse
Smoke Shop with the code: "CANNABASICS":
http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic
Joint (Doobie):
Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers lengthwise for a fat joint or end to end for a long joint.
Nubivagant
Hip Hop Culture: https://youtube.com/channel/UCKY8uraRA4dRpMQslNBkePw
Subscribe here: https://www.youtube.com/user/RuffHouseStudios?sub_confirmation=1
RUFFHOUSETV: http://ruffhouse.tv/
WEBSITE: http://www.ruffhousestudios.com
YOUTUBE: https://www.youtube.com/user/ruffhousestudios
INSTAGRAM: http://instagram.com/ruffhousestudios
GOOGLE +: https://plus.google.com/u/0/100321991289006940450
FACEBOOK: https://www.facebook.com/RuffHouseStudios
TWITTER: http://www.twitter.com/#!/ruffhousestudio
https://wn.com/How_To_Roll_5_Types_Of_Joints_(Basic,_Tipped,_Cone,_Backrolled_Oversized)_Cannabasics_49
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & an oversized joint.
Save 10% in the RuffHouse
Smoke Shop with the code: "CANNABASICS":
http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic
Joint (Doobie):
Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers lengthwise for a fat joint or end to end for a long joint.
Nubivagant
Hip Hop Culture: https://youtube.com/channel/UCKY8uraRA4dRpMQslNBkePw
Subscribe here: https://www.youtube.com/user/RuffHouseStudios?sub_confirmation=1
RUFFHOUSETV: http://ruffhouse.tv/
WEBSITE: http://www.ruffhousestudios.com
YOUTUBE: https://www.youtube.com/user/ruffhousestudios
INSTAGRAM: http://instagram.com/ruffhousestudios
GOOGLE +: https://plus.google.com/u/0/100321991289006940450
FACEBOOK: https://www.facebook.com/RuffHouseStudios
TWITTER: http://www.twitter.com/#!/ruffhousestudio
- published: 14 Mar 2017
- views: 990
$40 JOINT!!!!!!!!
videos
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made
...
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw
12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus
Harry Dabs and I
each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆
SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
https://wn.com/40_Joint
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw
12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus
Harry Dabs and I
each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆
SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
- published: 14 Apr 2016
- views: 773032
3 suspected gangster's arrested in STF and police's joint operation
videos
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
https://wn.com/3_Suspected_Gangster's_Arrested_In_Stf_And_Police's_Joint_Operation
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
- published: 22 Apr 2017
- views: 107
NATO Joint ISR
videos
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay Te
...
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay
Tennemann
additional 3D: Marijn Raeven, Filip
Lange
musik & sfx :
Janosch Groth / FONOMEN
https://wn.com/Nato_Joint_Isr
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay
Tennemann
additional 3D: Marijn Raeven, Filip
Lange
musik & sfx :
Janosch Groth / FONOMEN
- published: 23 Oct 2014
- views: 8349
Joint Studies Mandy004
videos
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for
...
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with
Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
https://wn.com/Joint_Studies_Mandy004
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with
Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
- published: 20 Aug 2011
- views: 0
Joint Chain Examples
videos
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
https://wn.com/Joint_Chain_Examples
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
- published: 19 Jun 2010
- views: 49480
Joint Chains, Spiral Growth, Iterative Hierarchies, & the Golden Section
videos
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. Th
...
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation
... so please, feel free to comment.
:)
https://wn.com/Joint_Chains,_Spiral_Growth,_Iterative_Hierarchies,_The_Golden_Section
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation
... so please, feel free to comment.
:)
- published: 10 Jun 2010
- views: 61093
VB Joint & Helper Study
videos
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sen
...
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the
Level 03 render, you can see on the lower third of the cylinder how it just explodes.
It's because the initial joint had the most change in velocity(and hence would have more collisions in the following sims).
However, as I was playing around with this. rman197 posted his jointed setup here: https://vimeo.com/98825271 I had to include this in my test because he did something interesting
I never even though about; which is switching the joint type. Such a great a idea! That is what the first yellow cylinders are. That simple joint setup drives the next level. He was also
100% correct that it's forgiving if you aren't happy with how the movement is going - then you can iterate quickly without waiting for a juggernaut of a
sim to finish, be displeased, and then re-sim.
Now, if
I were to do this again (and I'm certainly going to), My first level of fragmentation will be using RayFire because it's
Voronoi pattern choice is more visually pleasing.
Plus, I could fragment larger chunks with space between to then cluster with those; like rman's clustering method. The only other thing I did was freeze the very base of the pillar because that typically does not tip over.
I think I covered all the bases.
https://wn.com/Vb_Joint_Helper_Study
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the
Level 03 render, you can see on the lower third of the cylinder how it just explodes.
It's because the initial joint had the most change in velocity(and hence would have more collisions in the following sims).
However, as I was playing around with this. rman197 posted his jointed setup here: https://vimeo.com/98825271 I had to include this in my test because he did something interesting
I never even though about; which is switching the joint type. Such a great a idea! That is what the first yellow cylinders are. That simple joint setup drives the next level. He was also
100% correct that it's forgiving if you aren't happy with how the movement is going - then you can iterate quickly without waiting for a juggernaut of a
sim to finish, be displeased, and then re-sim.
Now, if
I were to do this again (and I'm certainly going to), My first level of fragmentation will be using RayFire because it's
Voronoi pattern choice is more visually pleasing.
Plus, I could fragment larger chunks with space between to then cluster with those; like rman's clustering method. The only other thing I did was freeze the very base of the pillar because that typically does not tip over.
I think I covered all the bases.
- published: 27 Jun 2014
- views: 3379
-
How To Roll The Perfect Joint. Every Time.
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in Oregon, where recreational marijuana was legalized in 2015. Given all that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on Facebook: https://www.facebook.com/Vocativ
published: 02 Aug 2016
-
How to Roll a Fatass Twax Joint - Rolling with Dutch
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
published: 30 Jan 2017
-
Baked - Episode 9: How to Joint
For licensing and media inquiries, go to http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
published: 16 Apr 2015
-
The Artist Behind The World's Greatest Joints
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on Facebook: https://www.facebook.com/Vocativ
published: 02 Aug 2016
-
Smoking a Joint
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook: http://www.facebook.com/theTHCtemple
published: 26 Mar 2017
-
How To Roll 5 Types of Joints (Basic, Tipped, Cone, Backrolled & Oversized): Cannabasics #49
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a Basic Doobie, a Tipped joint, a Cone joint, a Backrolled joint & an oversized joint. Save 10% in the RuffHouse Smoke Shop with the code: "CANNABASICS": http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic Joint (Doobie): Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers length...
published: 14 Mar 2017
-
$40 JOINT!!!!!!!!
18+older. We stuff $40 worth of Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw 12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus Harry Dabs and I each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆ SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
published: 14 Apr 2016
-
President Trump Holds a Joint Press Conference with Prime Minister Gentiloni
The White House
published: 20 Apr 2017
-
3 suspected gangster's arrested in STF and police's joint operation
ਜਲੰਧਰ 'ਚ STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
published: 22 Apr 2017
-
A GIANT HALF POUND Jamaican Joint
18+ Adult Information and Entertainment
Good Video? Like/Fave & Share!
http://coralcovejamaica.com/
-------------------------------------------------------------------------
Want to purchase my nutrients?
➜ http://www.remonutrients.com/
Like my page on Facebook:
➜ https://www.facebook.com/theUrbanGrower
Follow me on Twitter:
➜ http://twitter.com/theurbangrower
Follow me on Instagram
➜ http://instagram.com/theurbangrower
published: 13 Apr 2017
-
Rambo Joint GTL
published: 07 Nov 2013
-
How to Smoke a Joint
Milos Forman - Taking Off (1971)
published: 08 Jul 2014
-
NATO Joint ISR
Doing this Info movie together with the nice belgian gentlemen from "labrats.be" for NATO.
credits:
cd: Jean Pourveur
direction , design, animation : Kay Tennemann
additional 3D: Marijn Raeven, Filip Lange
musik & sfx : Janosch Groth / FONOMEN
published: 23 Oct 2014
-
Joint Studies Mandy004
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
published: 20 Aug 2011
-
Joint Chain Examples
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
published: 19 Jun 2010
-
TSB Campaign: 'The Story'
A 2.5min film for TSB - commissioned by JOINT LONDON - about the Reverend Henry Duncan and the history behind the building of the TSB bank. Combining the hand crafted artistry of 2D character animation within a stunningly integrated use of 3D CGI sets, The journey through time is reflected in the film's opening shot; an unbroken take which lasts a whopping 95 seconds...
Our campaign for the newly independent TSB continues ...
Client: TSB
Agency: JOINT LONDON
Director: MARC CRASTE
Production Company: STUDIO AKA
Music: ANNE DUDLEY
Narration: PATRICK STEWART
Sound Design: FACTORY
thestudio@studioaka.co.uk
published: 10 Sep 2013
-
The Furniture Joint w/Chad Parkinson
Furniture by:
Chad Parkinson
Thefurniturejoint@gmail.com
www.thefurniture-joint.com
IG - @thefurniturejoint
Music by:
Aaronbollschweiler@hotmail.com
published: 30 May 2014
-
Joint Chains, Spiral Growth, Iterative Hierarchies, & the Golden Section
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation... so please, feel free to comment.
:)
published: 10 Jun 2010
-
Joint Ops - Brazil
In the second instalment of NA BLEND's JOINT OPS series we join Eric Rienstra, Craig Cunningham, Sam Medysky, and Brandon Scheid for some action packed sessions in the Northeast of Brazil.
Edit : http://vincentbergeron.ca
http://www.slingshotsports.com
http://www.northkites.com
http://www.bestkiteboarding.com
http://liquidforcekites.com
published: 09 Mar 2014
-
VB Joint & Helper Study
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the Level 03 render, you can see on the lower...
published: 27 Jun 2014
How To Roll The Perfect Joint. Every Time.
videos
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/
...
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in
Oregon, where recreational marijuana was legalized in
2015. Given all
that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
https://wn.com/How_To_Roll_The_Perfect_Joint._Every_Time.
Tony Greenhand has made a career out of rolling joints (https://www.instagram.com/tonygreenhand). You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand)
Vocativ filmed him at his home in
Oregon, where recreational marijuana was legalized in
2015. Given all
that, it’s no surprise he’s a perfectionist when it comes to the basics, and his step-by-step tutorial walks through the nine steps to a stupendous jay.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
- published: 02 Aug 2016
- views: 654588
How to Roll a Fatass Twax Joint - Rolling with Dutch
videos
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soe
...
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
https://wn.com/How_To_Roll_A_Fatass_Twax_Joint_Rolling_With_Dutch
I pre apolgize for any audio issues.
In this video, @dutchhustle is going over how to roll up a fatass twax joint while i struggle with a tiny one. I hope soem of you find this instructional because i sure did and im damn proud i can finally roll up a fat circular, smokeable joint!
The joint consisted of 45+ grams of flower, 7+ grams of oil, and 4+ grams of kief. I didnt edit out much so your seeing the real ammount of time it took him to roll something this big and beautiful.
Also in the process he was able to teach me how to roll a baby version and i was successful.
I hope everyone enjoys!
@dutchhustle
@elementspapers
@scozglass
@2strokeglass
- published: 30 Jan 2017
- views: 582692
Baked - Episode 9: How to Joint
videos
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree
...
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on
Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
https://wn.com/Baked_Episode_9_How_To_Joint
For licensing and media inquiries, go to
http://www.cut.com/licensing
Produced, Directed, and Edited by Cut.com
Thanks to The
Novel Tree
http://www.novel-tree.com/
Talent
Gordon Landers
Like Us on
Facebook
http://www.facebook.com/storiesbycut
Follow Us on Twitter
http://www.twitter.com/watchcut
Subscribe to us:
http://www.cut.com
- published: 16 Apr 2015
- views: 664345
The Artist Behind The World's Greatest Joints
videos
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can
...
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
https://wn.com/The_Artist_Behind_The_World's_Greatest_Joints
Tony Greenhand is a champion in the newly-emerging field of competitive joint rolling. Vocativ went into the lab to watch him create his smokeable art. You can read our epic profile on Tony here (
http://www.voc.tv/tonygreenhand) and learn how to make a living in the lucrative and somewhat-legal minefield of marijuana sculpture.
Subscribe! http://www.youtube.com/subscription_center?add_user=vocativvideo
See more on our website: http://www.vocativ.com
Follow us on Twitter: https://twitter.com/vocativ
Like us on
Facebook: https://www.facebook.com/Vocativ
- published: 02 Aug 2016
- views: 1054944
Smoking a Joint
videos
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter
....
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook:
http://www.facebook.com/theTHCtemple
https://wn.com/Smoking_A_Joint
Smoking a joint of some good OG kush.
support the show!: https://goo.gl/w3OXvH
instagram: https://www.instagram.com/iamlarryjones
twitter: https://www.twitter.com/thethctemple
snapchat: iamlarryjones
facebook:
http://www.facebook.com/theTHCtemple
- published: 26 Mar 2017
- views: 4826
How To Roll 5 Types of Joints (Basic, Tipped, Cone, Backrolled & Oversized): Cannabasics #49
videos
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & a
...
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & an oversized joint.
Save 10% in the RuffHouse
Smoke Shop with the code: "CANNABASICS":
http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic
Joint (Doobie):
Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers lengthwise for a fat joint or end to end for a long joint.
Nubivagant
Hip Hop Culture: https://youtube.com/channel/UCKY8uraRA4dRpMQslNBkePw
Subscribe here: https://www.youtube.com/user/RuffHouseStudios?sub_confirmation=1
RUFFHOUSETV: http://ruffhouse.tv/
WEBSITE: http://www.ruffhousestudios.com
YOUTUBE: https://www.youtube.com/user/ruffhousestudios
INSTAGRAM: http://instagram.com/ruffhousestudios
GOOGLE +: https://plus.google.com/u/0/100321991289006940450
FACEBOOK: https://www.facebook.com/RuffHouseStudios
TWITTER: http://www.twitter.com/#!/ruffhousestudio
https://wn.com/How_To_Roll_5_Types_Of_Joints_(Basic,_Tipped,_Cone,_Backrolled_Oversized)_Cannabasics_49
Today on Cannabasics we learn how to roll 5 different types of of marijuana joints. We roll a
Basic Doobie, a Tipped joint, a
Cone joint, a Backrolled joint & an oversized joint.
Save 10% in the RuffHouse
Smoke Shop with the code: "CANNABASICS":
http://www.ruffhousestudios.com
Here is a basic overview of the types of joints we are rolling today all using standard length (79mm) 1 ¼ width rolling papers.
Basic
Joint (Doobie):
Flat fold, canoed fold, edge fold, cut edge.
Tipped Joint (Joint with tip, crutch or roach):
Cone Joint (Tipped joint with cone shape):
Backrolled Joint: A Backrolled joint is one that is rolled backwards so the excess paper can be removed rather than rolled and smoked.
Oversized Joint: 2 easy methods to roll a larger than usual joint are to combine 2 papers lengthwise for a fat joint or end to end for a long joint.
Nubivagant
Hip Hop Culture: https://youtube.com/channel/UCKY8uraRA4dRpMQslNBkePw
Subscribe here: https://www.youtube.com/user/RuffHouseStudios?sub_confirmation=1
RUFFHOUSETV: http://ruffhouse.tv/
WEBSITE: http://www.ruffhousestudios.com
YOUTUBE: https://www.youtube.com/user/ruffhousestudios
INSTAGRAM: http://instagram.com/ruffhousestudios
GOOGLE +: https://plus.google.com/u/0/100321991289006940450
FACEBOOK: https://www.facebook.com/RuffHouseStudios
TWITTER: http://www.twitter.com/#!/ruffhousestudio
- published: 14 Mar 2017
- views: 990
$40 JOINT!!!!!!!!
videos
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made
...
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw
12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus
Harry Dabs and I
each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆
SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
https://wn.com/40_Joint
18+older. We stuff $40 worth of
Grand Daddy Purple into a joint!! We picked up the chronic from Sweetgreens Co-Op cause the got the fire and here we go! We made a cone first with our Raw
12 inch papers, we took a big crutch and made this beauty! The joint starts off good and finishes even better with milky hits! $40 worth of weed into one joint and we are baked! We take a look at some other fire nugs from Sweetgreens Co-Op plus
Harry Dabs and I
each hit a dab! ENJOY!!!!
LIKE AND SUBSCRIBE FOR MORE!!!!!
☆
SHARE ☆ SHARE ☆ SHARE ☆
☆ SHARE ☆ SHARE ☆ SHARE ☆
- published: 14 Apr 2016
- views: 773032
3 suspected gangster's arrested in STF and police's joint operation
videos
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
https://wn.com/3_Suspected_Gangster's_Arrested_In_Stf_And_Police's_Joint_Operation
ਜਲੰਧਰ 'ਚ
STF 'ਤੇ ਪੁਲਿਸ ਦੀ ਵੱਡੀ ਕਾਰਵਾਈ, 3 ਸ਼ੱਕੀ ਗੈਂਗਸਟਰ ਕਾਬੂ
3 suspected gangster's arrested in STF and police's joint operation
- published: 22 Apr 2017
- views: 107
NATO Joint ISR
videos
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay Te
...
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay
Tennemann
additional 3D: Marijn Raeven, Filip
Lange
musik & sfx :
Janosch Groth / FONOMEN
https://wn.com/Nato_Joint_Isr
Doing this
Info movie together with the nice belgian gentlemen from "labrats.be" for
NATO.
credits:
cd:
Jean Pourveur
direction , design, animation : Kay
Tennemann
additional 3D: Marijn Raeven, Filip
Lange
musik & sfx :
Janosch Groth / FONOMEN
- published: 23 Oct 2014
- views: 8349
Joint Studies Mandy004
videos
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for
...
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with
Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
https://wn.com/Joint_Studies_Mandy004
A simple video in a series showing how the joints move in various directions. Intended for artists studying the figure. We've been thinking about doing this for years. We finally bought an HD camera and got together with
Mandy to do some tests. We ended up getting 39 different motions from the neck down to the feet. This one is the shoulder.
- published: 20 Aug 2011
- views: 0
Joint Chain Examples
videos
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
https://wn.com/Joint_Chain_Examples
Wireframes of both the FlowerBomb and ShureShot IDs revealing where joint chains were used.
- published: 19 Jun 2010
- views: 49480
Joint Chains, Spiral Growth, Iterative Hierarchies, & the Golden Section
videos
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. Th
...
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation
... so please, feel free to comment.
:)
https://wn.com/Joint_Chains,_Spiral_Growth,_Iterative_Hierarchies,_The_Golden_Section
DISCLAIMER:
This is *not* a tutorial.
It's 45mins of me geeking out on spiral growth. If that interests you then grab a whiskey and come along for the ride. The purpose of this video is not only to share some of the methods I use in my work, but also to gauge people's reactions to the pace, focus, content, and style of the presentation
... so please, feel free to comment.
:)
- published: 10 Jun 2010
- views: 61093
VB Joint & Helper Study
videos
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sen
...
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the
Level 03 render, you can see on the lower third of the cylinder how it just explodes.
It's because the initial joint had the most change in velocity(and hence would have more collisions in the following sims).
However, as I was playing around with this. rman197 posted his jointed setup here: https://vimeo.com/98825271 I had to include this in my test because he did something interesting
I never even though about; which is switching the joint type. Such a great a idea! That is what the first yellow cylinders are. That simple joint setup drives the next level. He was also
100% correct that it's forgiving if you aren't happy with how the movement is going - then you can iterate quickly without waiting for a juggernaut of a
sim to finish, be displeased, and then re-sim.
Now, if
I were to do this again (and I'm certainly going to), My first level of fragmentation will be using RayFire because it's
Voronoi pattern choice is more visually pleasing.
Plus, I could fragment larger chunks with space between to then cluster with those; like rman's clustering method. The only other thing I did was freeze the very base of the pillar because that typically does not tip over.
I think I covered all the bases.
https://wn.com/Vb_Joint_Helper_Study
Voronoi everywhere! I'm hopping on the VolumeBreaker bandwagon. But no, I was looking into different methods of using the VolumeBreaker
operator rather than sending a particle to a new group and fracturing it. My original plan was testing out Joe Scarr's method of applying the VB without any activation, and then instead of using cell, just use those particles as helpers to activate the nearest VB fragments. I like this method the most because I think it gives a more natural look. The other good thing about setting it up this way with conditions set for collisions and velocity, is that it almost kind of resembled area of most intense pressure. But only when used in conjunction with the PAttach from the joints. A good representation of this is on the
Level 03 render, you can see on the lower third of the cylinder how it just explodes.
It's because the initial joint had the most change in velocity(and hence would have more collisions in the following sims).
However, as I was playing around with this. rman197 posted his jointed setup here: https://vimeo.com/98825271 I had to include this in my test because he did something interesting
I never even though about; which is switching the joint type. Such a great a idea! That is what the first yellow cylinders are. That simple joint setup drives the next level. He was also
100% correct that it's forgiving if you aren't happy with how the movement is going - then you can iterate quickly without waiting for a juggernaut of a
sim to finish, be displeased, and then re-sim.
Now, if
I were to do this again (and I'm certainly going to), My first level of fragmentation will be using RayFire because it's
Voronoi pattern choice is more visually pleasing.
Plus, I could fragment larger chunks with space between to then cluster with those; like rman's clustering method. The only other thing I did was freeze the very base of the pillar because that typically does not tip over.
I think I covered all the bases.
- published: 27 Jun 2014
- views: 3379