MACH II™ 5″ Gutter Machine – Features

The ORIGINAL polyurethane drive system.
New Tech Machinery’s patented MACH II^™ has taken the seamless gutter industry to a new level. The only way to compete in the gutter forming business is to own a MACH II^™ . Don’t get stuck with an imitation.

Standard Features:
• Polyurethane Drive Rollers
• Stainless Steel Forming Rollers
• Push Button RUN/JOG Controls at Entry and Exit Ends
• Forward Pulling, Easy Cut Shear
• Power Interruption Safety Circuit
• Two 360º Rotatable Reel Stands with Easy Lift Reels
• Electric Motor ¾ HP, 110 VAC, 60 Hz, 1 Phase, 11 amps
• Welded Tubular Steel Frame
• Industry’s Best Warranty

MACH II™ 5″ Gutter Machine – Specifications

GM5
Weight 1000 lbs (454kg)
Length 8’ (2.4m)
Height 3’10” (1.2m)
Width 2’ (.6m) plus shear handle
_________________________________________________________
Speed
50 ft./min (18 m/min) Approx.
__________________________________________________________
Shear
Manually Powered, Hardened Tool
Steel Blade and Dies

Drive
Polyurethane Rollers
_________________________________________________________
Materials Formed
Steel 30 ga. to 24 ga. (.3mm to .6mm) (painted, galvanized, aluminized)
Painted Aluminum .019” to .032” (.5mm to .8mm)
Copper 16 oz. to 20 oz. 3/4 Hard (.5mm to .7mm)
_________________________________________________________
Material Width
5” Machine: 11-3/4” to 12-3/8” (300mm to 315mm)
_________________________________________________________
Note: Requires 10 gauge, 15 Amp Extension Cord.

Gutter Machine – Profiles

	MACH II – 5″	MACH II – 6″	MACH II Combo 5″ & 6″	BG7 – 7″
5″ Straight Back	View Profile		View Profile
5″ Hook	View Profile		View Profile
5″ Back Flange*	View Profile
5″ Bottom Bead	View Profile		View Profile
6″ Straight Back		View Profile	View Profile
6″ Hook		View Profile	View Profile
6″ Back Flange*		View Profile
6″ Bottom Bead		View Profile	View Profile
7″ Straight Back				View Profile
7″ Hook				View Profile

MACH II™ 5″ Gutter Machine – Options

TRN – Turnstile Reel Stand
Machine mounted stand for holding reeled coils of material. Rotates 360 degrees for ease of loading. Machine capacity is 3 total.

__________________________________________________________
RL16 or RL20
Adjustable width reels for 11-3/4” through 15” wide coil for 5” or 6” gutters.
__________________________________________________________
ROS1 – Run Out Stand
Supports gutter as it runs out of machine. Tripod style stands with 1 adjustable leg for leveling and conveyor roller to support gutter. One stand recommended for every 20’ of gutter. Adjustable in height from 31 ½” to 45”.

__________________________________________________________
ROS – 3
Set of 3 run-out stands
__________________________________________________________
RAC – Transfer Rack
Used to transfer loaded coils from one turnstile reel stand to the other. (1 set / machine needed)
__________________________________________________________
SH5 – Geared Shear
Mechanically advantaged forward pulling shear for cutting 5” & 6” gutter to length.
__________________________________________________________
GFI – Ground Fault Interruption Plug

EZ Counter Computerized Length Controller
Program up to 50 lengths, tracks material, offers miter options on all gutter machines, operate in feet and inches, inches only or centimeters. Operates as an Easy-touch screen.

________________________________________________________________

CR5-5/6 – Coil Cradle
Used to hold full or partial coils for 5” and 6” gutter. Can be machine or floor mounted. Capacity 700lbs.

__________________________________________________________

HK5 – Alcoa Hook
Forms a 5/16” hook on the back of the gutter for use with free float hanger system. Also accommodates standard hangers or spike and ferrule.
__________________________________________________________
BF 1-5 thru BF15-6 – Back Flange 1” and 1 ½”
Forms 1” or 1 ½” flange on back of 5” or 6”gutter eliminating the need for flashing. Used with 5” or 6” machine only.
_________________________________________________________
BF 5SH thru BF15-6H – Back Flange Shear
Mechanically advantaged forward pulling shear for cutting 5” and 6” back flange gutter to length.
__________________________________________________________
12V – 12 Volt Electrical System
DC Motor and control to allow operation of machine with 12 volt battery. (Battery not included).
__________________________________________________________
BB5 & BB6 – Bottom Bead Assembly
Adds unique design to bottom of gutter.
__________________________________________________________
CVR – Machine Cover
K-Tex synthetic canvas material, form fitted to body of machine.
__________________________________________________________
ELEC1 3/4 Hp, 110VAC, 60Hz, 1Ph, 11Amps
__________________________________________________________
ELEC2 3/4 Hp, 110VAC, 50Hz, 1Ph, 11Amps
__________________________________________________________
ELEC3 3/4 Hp, 230VAC, 50Hz, 1Ph, 5Amps
__________________________________________________________
ELEC1 1 Hp, 12VDC, 80Amps