Help:CS1 errors
![]() |
This page is a how-to guide, detailing processes or procedures of some aspect or aspects of Wikipedia's norms and practices. It is not one of Wikipedia's policies or guidelines. |
This page describes the error messages reported by the Citation Style 1 and Citation Style 2 citations, what they mean, and how editors might resolve the errors.
Prior to 2013, the CS1|2 templates used the meta-template {{citation/core}}
. In 2013, as part of the WP:LUA project, Wikipedia editors upgraded the CS1|2 series of templates to use a single Lua module. Module:Citation/CS1 is the engine that controls how CS1|2 citations are displayed and how citation data are passed to external referencing tools through COinS metadata. The benefits of the upgrade are enhanced performance, reduced complexity and redundancy, and for the purposes of this page, improved error detection, categorization, and reporting.
Category:CS1 errors is the general errors category and Category:CS1 maintenance is the general maintenance category.
Contents
- 1 Controlling error message display
- 2 |access-date= requires |url=
- 3 |archive-url= is malformed
- 4 |archive-url= requires |archive-date=
- 5 |archive-url= requires |url=
- 6 |arxiv= required
- 7 |chapter= ignored
- 8 Check |arxiv= value
- 9 Check |asin= value
- 10 Check |bibcode= <message>
- 11 Check |biorxiv= value
- 12 Check |citeseerx= value
- 13 Check date values in: |<param1>=, |<param2>=, ...
- 14 Check |doi= value
- 15 Check |hdl= value
- 16 Check |isbn= value
- 17 Check |ismn= value
- 18 Check |issn= value
- 19 Check |lccn= value
- 20 Check |message-id= value
- 21 Check |oclc= value
- 22 Check |ol= value
- 23 Check |<param>-link= value
- 24 Check |pmc= value
- 25 Check |pmid= value
- 26 Check |url= value
- 27 Cite uses deprecated parameter |<param>
- 28 |coauthors= requires |author=
- 29 |contributor= ignored
- 30 |contributor= requires |<param>=
- 31 Empty citation
- 32 External link in |<param>=
- 33 |firstn= missing |lastn= in Authors/Editors list
- 34 |format= requires |url=
- 35 Invalid <param>=<value>
- 36 Missing |lastn= in Authors/Editors list
- 37 Missing or empty |title=
- 38 Missing or empty |url=
- 39 More than one of |<param1>=, |<param2>=, and |<param3>= specified
- 40 Text "????" ignored
- 41 |trans-<param>= requires |<param>=
- 42 Unknown parameter |xxxx= ignored
- 43 Unsupported parameter(s) in cite arXiv
- 44 URL–wikilink conflict
- 45 Vancouver style error
- 46 <char> character in |<param>= at position n
- 47 |<param>-access= requires |<param>=
- 48 Notes
- 49 References
Controlling error message display
While most of the Citation Style 1 and Citation Style 2 error messages are visible to all readers, some remain hidden. Editors who wish to see all of the CS1|2 error messages can do so by updating their common or skin CSS stylesheet to include:
.citation-comment {display: inline !important;} /* show all Citation Style 1 error messages */
Even with this css installed, older pages in Wikipedia's cache may not have been updated to show these error messages even though the page is listed in one of the tracking categories. A WP:NULLEDIT will resolve that issue.
The above code is required if you wish to see maintenance category messages:
- Category:CS1 maintenance (link)
Editors who do not wish to see any of the CS1 error messages can hide them all by updating their common or skin CSS stylesheet to include:
.citation-comment {display: none;} /* hide all Citation Style 1 error messages */
|access-date= requires |url=
|access-date=
requires |url=
(error message hidden by default)
The |access-date=
(or its alias, |accessdate=
) is the date that the online resource addressed by |url=
was added to the article. If |access-date=
has been included in the citation without |url=
then this message appears. If the citation does not use a web link, then |access-date=
is redundant and should be removed.
When the online resource has a publication or other fixed date associated with it, |access-date=
is of limited value though may be useful in identifying an appropriate archived version of the resource. Without |url=
, |access-date=
is not considered useful.
To resolve this error, provide a value for |url=
or remove |access-date=
. Editors should try to determine why the citation has |access-date=
without |url=
. For example, the citation may never have had a |url=
, or |url=
may have been removed because it links to a site that violates the creator's copyright (see WP:COPYLINK), or because |url=
was deemed to be dead and (mistakenly) removed. If the citation never had |url=
or it was removed for copyright violations, remove |access-date=
. When a dead |url=
has been removed, restore the |url=
and if possible repair it (see WP:LINKROT).
Pages with this error are automatically placed in Category:Pages using citations with accessdate and no URL.[a]
|archive-url= is malformed
|archive-url=
is malformed: <reason>
Archive.org allows a variety of urls to access snapshots of an archived page. Some of these are:
https://web.archive.org/web/YYYYMMDD
– a single snapshot; this is the preferred form for use withhhmmss/http://www.example.com |archive-url=
https://web.archive.org/web/*/http://
– a wildcard search results page; useful for locating an appropriate snapshot but not appropriate in a citationwww.example.com https://web.archive.org/web/
– incomplete timestamp; archive.org returns the most recent snapshot201603/http://www.example.com https://web.archive.org/save/http://
– saves a new snapshot of the current target; do not use this formwww.example.com
There are two forms of the basic url:
https://web.archive.org/<timestamp>/...
– the old formhttps://web.archive.org/web/<timestamp><flags>/...
– the new form
The error message identifies the reason for the message. The reasons are:
- save command – the archive.org url is the save command
- path – web/ was expected but something else was found
- timestamp – the timestamp portion of the url path is not 14 digits
- flag – the flag portion of the url path (if present; new form urls only) is not 2 lowercase letters followed by an underscore: 'id_'
When the archive.org url has any of these errors, Module:Citation/CS1 does not link to archive.org and emits an appropriate error message.
To resolve this error, choose the url of an appropriate snapshot from those held at archive.org. Search for the target url.
Pages with this error are automatically placed in Category:Pages with archiveurl citation errors.[a]
|archive-url= requires |archive-date=
|archive-url=
requires |archive-date=
|archive-date=
(or its alias, |archivedate=
), identifies the date that the web resource was archived.
To resolve this error, provide a value for |archive-date=
. For web resources archived at archive.org,[1] the archival date can be found in the |archive-url=
; for resources archived at webcitation.org,[2] the cache date is included in the archive header.
Pages with this error are automatically placed in Category:Pages with archiveurl citation errors.[a]
|archive-url= requires |url=
|archive-url=
requires |url=
A properly formatted citation that includes |archive-url=
and |archive-date=
requires |url=
. When the citation includes |dead-url=no
, the ordering of elements in the rendered citation is changed to put the original url first.
To resolve this error, provide a value for |url=
. For web resources archived at archive.org,[1] the original url can be found in the |archive-url=
value; for resources archived at webcitation.org,[2] the original url is included in the archive header.
Pages with this error are automatically placed in Category:Pages with archiveurl citation errors.[a]
|arxiv= required
|arxiv=
required
{{cite arxiv}}
requires one, but not both, of the identifier parameters |arxiv=
or |eprint=
.
To resolve this error, ensure that the template has |arxiv=
or |eprint=
with a properly constructed value.
Pages with this error are automatically placed in Category:CS1 errors: arXiv.[a]
|chapter= ignored
|chapter=
ignored
Citation Style 1 templates {{cite web}}
, {{cite news}}
, {{cite journal}}
, {{cite press release}}
, {{cite podcast}}
, {{cite newsgroup}}
, and template {{citation}}
when {{citation}}
uses |work=
or any of its aliases, do not support |chapter=
or the aliases |contribution=
, |entry=
, |article=
, or |section=
.
To resolve this error, use a more appropriate citation template or place the content of the |chapter=
parameter in |title=
.
Pages with this error are automatically placed in Category:CS1 errors: chapter ignored.[a]
Check |arxiv= value
Check |arxiv=
value
When Citation Style 1 and Citation Style 2 templates contain |arxiv=
, a test is done to see if the arXiv identifier conforms with the arXiv identifier scheme.[3] The identifier is checked for a valid number of digits in the article id; valid year and month values; and properly-placed hyphens, slashes, and dots.
To resolve this error, ensure that the |arxiv=
value is correct.
Pages with this error are automatically placed in Category:CS1 errors: arXiv.[a]
Check |asin= value
Check |asin=
value
When Citation Style 1 and Citation Style 2 templates contain |asin=
, a test is done to see if the ASIN identifier is contains ten upper-case alphanumeric characters without punctuation or spaces and that if the first character is numeric, that the ASIN conforms to the rules for a ten-digit ISBN.
To resolve this error, ensure that the |asin=
value is correct.
If the |asin=
value is correct and all-numeric, use |isbn=
instead and delete any |asin-tld=
parameters. Articles with CS1 citations that use |asin=
with all numeric values are categorized in Category:CS1 maint: ASIN uses ISBN.
Pages with this error are automatically placed in Category:CS1 errors: ASIN.[a]
Check |bibcode= <message>
Check |bibcode=
<message>
When Citation Style 1 and Citation Style 2 templates contain |bibcode=
, a test is done to see if the bibcode identifier has the proper format.[4] Bibcodes are expected to match these requirements:
- length must be 19 characters (<message> = 'length')
- characters in position(s): (except as specified otherwise, violations produce 'value' in the <message> portion of the error message):
- 1–4 must be digits and must represent a year in the range of 1000 – next year (<message> = 'year')
- 5 must be a letter
- 6–8 must be letter, ampersand, or dot (ampersand cannot directly precede a dot; &. (<message> = 'journal'))
- 9 must be letter or dot
- 10–18 must be letter, digit, or dot
- 19 must be a letter or dot
To resolve this error, ensure that the |bibcode=
value is correct.
Pages with this error are automatically placed in Category:CS1 errors: bibcode.[a]
Check |biorxiv= value
Check |biorxiv=
value
When Citation Style 1 and Citation Style 2 templates contain |biorxiv=
, a test is done to see if the bioRxiv identifier comprises six numeric characters without punctuation or spaces. A common error is to include the bioRxiv url (http://dx.doi.org/10.1101/<BIORXIV>), or the biorxiv doi (10.1101/<BIORXIV>)
To resolve this error, ensure that the |biorxiv=
value is correct.
Pages with this error are automatically placed in Category:CS1 errors: bioRxiv.[a]
Check |citeseerx= value
Check |citeseerx=
value
When Citation Style 1 and Citation Style 2 templates contain |citeseerx=
, a test is done to see if the CiteSeerX identifier has the proper format. The expected identifier is the value assigned to the ?doi=
query key in the URL of a CiteSeerX document. (This query key should not be confused with a Digital Object Identifier: it should not be input as |doi=
.)
For instance, if you want to link to http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.220.7880
, use |citeseerx=10.1.1.220.7880
.
Pages with this error are automatically placed in Category:CS1 errors: citeseerx.[a]
Check date values in: |<param1>=, |<param2>=, ...
Check date values in: |<param1>=, |<param2>=, ...
When Citation Style 1 and Citation Style 2 templates contain date-holding parameters, an automated test is done to see if the dates are real dates that comply with a subset of the date rules in Wikipedia's Manual of Style, specifically checking for violations of MOS:DATEFORMAT.
To resolve this error, ensure that the date is an actual date and that the date format follows the Wikipedia Manual of Style's guidance on dates in the named parameter. See examples of unacceptable dates and how to fix them, below. Or, some conceptual issues to look for:
- impossible dates (e.g., 29 February 2011)
|access-date=
must specify a day, not just a month or year.- misplaced, incorrect, or extraneous punctuation
- extraneous text
- hyphens or slashes instead of en dashes in date ranges (en dashes are required)
- misspelling or improper capitalization (see MOS:ALLCAPS for more detail that is not in Wikipedia Manual of Style's guidance on dates)
- other unacceptable date formats listed in MOS:BADDATEFORMAT
- more than one date in a date-holding parameter
- Does not handle years before 100 AD, including BCE/BC dates. Try using parameter
|orig-year=
instead.
See Help: Citation Style 1 for information about limitations in the CS1 citation templates' handling of date formats. The MOS section on date ranges describes how to separate dates in a date range. Do not use
, –
, or {{spaced ndash}}
as these corrupt the metadata. To add an en dash, use the CharInsert edit tool or see Wikipedia:How to make dashes. A bot is often able to correct the separator, provided the overall format is unambiguous.
Future dates in |date=
in CS1|2 citations are limited to current year + 1; that is, for 2017, citation dates in 2018 are acceptable but citation dates in 2019 and beyond are not.
Dates prior to 1582 are treated as Julian calendar dates. Dates from 1582 onward are treated as Gregorian calendar dates. The Julian calendar was used in some places until approximately 1923. Three Julian calendar dates in the overlap period, 29 February in the years 1700, 1800, and 1900, will cause this error message because those years are not leap years in the Gregorian calendar.
The access date (in |access-date=
) is checked to ensure that it contains a full date (day, month, and year) and is between 15 January 2001 (the founding date of Wikipedia) and today's date plus one day, because it represents the date that an editor viewed a web-based source to verify a statement on Wikipedia. Because editors may be in time zones that are one day ahead of the UTC date, one extra day is accepted.
Pages with this error are automatically placed in Category:CS1 errors: dates.[a]
Issue | Unacceptable | Acceptable |
---|---|---|
Hyphen in date range (use en dash) | |date=2002-2003 |
|date=2002–2003 |
Slash in date range (use en dash) | |date=2002/2003 |
|date=2002–2003 |
Hyphen in date range (use en dash) | |date=April-May 2004 |
|date=April–May 2004 |
Missing space around en dash for range of full dates | |date=April 2003–May 2004 |
|date=April 2003 – May 2004 |
Month capitalization | |date=28 february 1900 |
|date=28 February 1900 |
Month capitalization | |date=28 FEBRUARY 1900 |
|date=28 February 1900 |
Season capitalization | |date=spring 2011 |
|date=Spring 2011 |
Future date (typo) | |date=2102 |
|date=2012 |
Access date in future (see note above) | |accessdate=March 11, 2017 |
|accessdate=March 9, 2017 |
Access date impossibly far in the past (typo) | |access-date=1 January 2001 |
|access-date=1 January 2010 |
Access date only specifies month | |access-date=January 2015 |
|access-date=12 January 2015 |
Ambiguous date range or year and month | |date=2002-03 |
|
Bad abbreviation | |date=Febr. 28, 1900 |
|
Nonexistent date | |date=February 29, 1900 |
|
Comma in month and year | |date=February, 1900 |
|date=February 1900 |
Missing comma in format which requires it | |date=February 28 1900 |
|date=February 28, 1900 or |date=28 February 1900 |
Non-date text | |date=2008, originally 2000 |
|date=2008 |orig-year=2000 |
Zero-padding | |date=January 04, 1987 |
|date=January 4, 1987 |
Date with slashes | |date=12/6/87 |
|
Two-digit year | |date=87-12-06 |
|date=1987-12-06 |
One-digit month or day | |date=2007-3-6 |
|date=2007-03-06 |
Wikified date | |date=[[April 1]], [[1999]] |
|date=April 1, 1999 |
"mm-dd-yyyy" or "dd-mm-yyyy" date format | |date=07-12-2009 |
|date=7 December 2009 or |date=July 12, 2009 or |date=December 7, 2009 |
Approximate or uncertain dates | |date=circa 1970 or |date={{circa}} 1970 |
|date=c. 1970 |
Check |doi= value
Check |doi=
value
When Citation Style 1 and Citation Style 2 templates contain |doi=
, a test is done to see if the prefix portion of the DOI value contains the proper 10.
registry identifier. Additionally, the |doi=
value is checked to make sure that it does not contain spaces or en dashes and does not end with punctuation. Further validation of the DOI is not performed.
To resolve this error, ensure that the |doi=
value is correct.
Pages with this error are automatically placed in Category:CS1 errors: DOI.[a]
Check |hdl= value
Check |hdl=
value
When Citation Style 1 and Citation Style 2 templates contain |hdl=
, a test is done to see if the hdl value looks like a properly defined value. The |hdl=
value is checked to make sure that it does not contain spaces or en dashes and does not end with punctuation. Further validation of the hdl is not performed.
To resolve this error, ensure that the |hdl=
value is correct.
Pages with this error are automatically placed in Category:CS1 errors: HDL.[a]
Check |isbn= value
Check |isbn=
value: <type>
Citation Style 1 and Citation Style 2 templates that contain |isbn=
are checked to ensure that the ISBN is the proper length (ten or thirteen digits), that the ISBN uses the correct optional separators (simple space or hyphen), and that the final check digit is correct according to the ISBN specification. Only one ISBN is allowed in this field because the whole |isbn=
value is included in the citation's COinS metadata. See also Wikipedia:COinS. More than one ISBN, or characters that are not part of the ISBN, corrupt the COinS metadata and may also corrupt the link to Special:BookSources.
The error message <type> indicator can be:
- length – ISBN is not 10 or 13 digits
- checksum – ISBN has one or more incorrect digits; look for typos and transposition
- invalid character – ISBN has one or more 'digits' that is not in the allowed set appropriate to ISBN length
- invalid prefix – 13-digit ISBNs must begin with '978' or '979'
- invalid form – 10-digit ISBNs with the mis-positioned 'X' character
To resolve this error, ensure that the |isbn=
value is correct, that only one ISBN is used, that the proper optional separators are used, and that no other text is included. Use the 13-digit ISBN when it is available. When a 10-digit ISBN is used, if the check digit is a lowercase 'x', change it to an uppercase 'X'.
- Do not try to resolve the error by simply recalculating the check digit. The check digit is there to check whether the main part of the number is correct. If the ISBN is failing to validate, it is likely that there is a typo in the main part of the number. In this case, recalculating the check digit results in an apparently valid ISBN that leads to the wrong source (or to nowhere).
- If you only have a 10-digit ISBN, do use the number as-is, do not try to convert it to the 13-digit form.
- If the ISBN as printed in your source is refusing to validate, do check both the front matter and the book cover for ISBNs. It is not uncommon for the ISBN to be misprinted in the front matter but correct on the cover.
- Do preview your edit and check that the new ISBN does now link to the correct source.
In very rare cases, publishers have released books with malformed ISBNs. If you are certain that a non-conforming ISBN truly corresponds to the published work, then you can add |ignore-isbn-error=true
to the citation in order to suppress the error message. In many cases, books may have been reissued with a corrected ISBN. Use a corrected ISBN when possible.
Sometimes there are numbers assigned to |isbn=
that appear to be legitimate – length is right, check digit is correct – but that aren't true ISBN numbers. This tool may be helpful.
See also Wikipedia:ISBN.
Pages with this error are automatically placed in Category:CS1 errors: ISBN.[a]
Check |ismn= value
Check |ismn=
value
Citation Style 1 and Citation Style 2 templates that contain |ismn=
are checked to ensure that the ISMN is the proper length (thirteen digits), that the ISMN uses the correct optional separators (simple space or hyphen), and that the final check digit is correct according to the ISMN specification. Only one ISMN is allowed in this field because the whole |ismn=
value is included in the citation's COinS metadata. See also Wikipedia:COinS. More than one ISMN, or characters that are not part of the ISMN, corrupt the COinS metadata.
To resolve this error, ensure that the |ismn=
value is correct, that only one ISMN is used, that the proper optional separators are used, and that no other text is included. Make sure that the ISMN contains exactly 13 digits.
Pages with this error are automatically placed in Category:CS1 errors: ISMN.[a]
Check |issn= value
- Check
|issn=
value - Check
|eissn=
value
Citation Style 1 and Citation Style 2 templates that contain |issn=
and/or |eissn=
are checked to ensure that the ISSN is the proper length (eight digits) and that the final check digit validates according to the ISSN specification. Only one each of ISSN and eISSN is allowed in this field because the whole |issn=
and |eissn=
values are included in the citation's COinS metadata. See also Wikipedia:COinS. The ISSN and eISSN are always rendered as two four-digit numbers separated with a hyphen.
To resolve this error, ensure that the |issn=
and |eissn=
values are correct, that only one value per parameter is used, and that no other text is included (allowable characters are 0-9, X, and -). If the check-digit is a lowercase 'x', change it to an uppercase 'X'.
Pages with this error are automatically placed in Category:CS1 errors: ISSN.[a]
Check |lccn= value
Check |lccn=
value
The |lccn=
parameter is the Library of Congress Control Number identifier. It is checked to ensure that the identifier is the proper length and has the correct initial digits.
LCCN is a character string 8–12 characters long. The length of the LCCN dictates the character type of the initial 1–3 characters; the rightmost eight are always digits.[5]
Length | Description |
---|---|
8 | all characters are digits |
9 | first character is a lower case letter |
10 | first two characters are either both lower case letters or both digits |
11 | first character is a lower case letter, second and third characters are either both lower case letters or both digits |
12 | first two characters are both lower case letters |
Further validation is not performed.
To resolve this error, ensure that the |lccn=
value is correct and that there are no other letters, punctuation, or other characters.
Pages with this error are automatically placed in Category:CS1 errors: LCCN.[a]
Check |message-id= value
Check |message-id=
value
The |message-id=
parameter holds the unique identifier associated with a netnews message.[6] The value in |message-id=
is checked to make sure that it contains @
between left and right identifiers. |message-id=
is also checked to make sure that the first character is not <
and the last character is not >
. Module:Citation/CS1 adds the uri news:
to the value in |message-id=
. If the value in |message-id=
is wrapped in <...>
characters, the link created fails.
Further validation is not performed.
To resolve this error, ensure that the |message-id=
value is correct, that it contains @
and is not wrapped in <...>
characters.
Pages with this error are automatically placed in Category:CS1 errors: message-id.[a]
Check |oclc= value
Check |oclc=
value
The |oclc=
parameter is the OCLC identifier. Only a single OCLC identifier is allowed. The identifier must be in one of these forms:
- prefix
ocm
followed by 8 digits - prefix
ocn
followed by 9 digits - prefix
on
followed by 10 digits - prefix
(OCoLC)
followed by a variable number of digits without leading zeros - 1 to 10 digits without prefix
Further validation is not performed.
To resolve this error, ensure that the |oclc=
value is correct.
A tip for fixing this error: Editors sometimes place valid ISBN, LCCN, ASIN, or other identifiers in |oclc=
.
Pages with this error are automatically placed in Category:CS1 errors: OCLC.[a]
Check |ol= value
Check |ol=
value
The |ol=
parameter is the Open Library identifier. The identifier is one or more digits followed by a last character that is either A
(authors), M
(books), or W
(works). Further validation is not performed.
To resolve this error, ensure that the |ol=
value is correct. Do not include "OL" in the value.
Pages with this error are automatically placed in Category:CS1 errors: OL.[a]
Check |<param>-link= value
Check |<param>-link=
value
Check |<param>=
value
These link-holding parameters and their matching title-holding parameters are combined to create a working wikilink to a related article.
|
|
(Parameters checked for this error may also be of the form |authorlink=
, |authorlink1=
, |author1-link=
, or |author-link1=
.)
This error occurs when any of these |<param>-link=
parameters contain a wikilink or a URL, or they contain any of the characters not permitted in Wikipedia article titles per WP:TITLESPECIALCHARACTERS (except _
(underscore), used as a replacement for spaces, and #
, used as a fragment identifier when linking to article sections). The prohibited characters are: < > [ ] | { }
.
The |<param>-link=
parameter value should contain only the title of a Wikipedia article or a link to a section of a Wikipedia article. Module:Citation/CS1 checks the |<param>-link=
parameter values for wikimarkup and for a URI scheme (http://
, https://
, the protocol relative scheme //
, etc.).
This error can also be caused when there is a |<param>-link=
value and the matching |<param>=
parameter contains a wikilink.
To resolve this error, do one of the following:
- Ensure that the
|<param>-link=
value is the full name of a Wikipedia article (without brackets) or a section of an article, and not a link to an external web site. - Make sure that there are no wikilinks in the matching
|<param>=
parameters. - If you want to link to a URL outside of Wikipedia, move the link to
|url=
or a similar parameter, if one is available in the template you are using.
Pages with this error are automatically placed in Category:CS1 errors: parameter link.[a]
Check |pmc= value
Check |pmc=
value
The |pmc=
parameter is the PubMed Central identifier. PMCs are sequential numbers beginning at 1 and counting up. Module:Citation/CS1 checks the PMC identifier to make sure that the value is a number greater than zero and less than 5000000 and that the identifier contains only digits. Further validation is not performed.
To resolve this error, ensure that the |pmc=
value is correct, and that there are no letters, punctuation, or other characters. Do not include "PMC" in the value.
Pages with this error are automatically placed in Category:CS1 errors: PMC.[a]
Check |pmid= value
Check |pmid=
value
The |pmid=
parameter is the PubMed identifier. PMIDs are checked to ensure that the identifier is a simple number without punctuation or spaces with a value greater than or equal to 1 and less than or equal to 30000000. Further validation is not performed.
To resolve this error, ensure that the |pmid=
value is correct. If you find something that looks like a PMID and begins with "PMC", use |pmc=
instead of |pmid=
.
Pages with this error are automatically placed in Category:CS1 errors: PMID.[a]
Check |url= value
Check |url=
value
External links in Citation Style 1 and Citation Style 2 templates are made from two parts: the title (|title=
, |chapter=
, etc.) and the URL (|url=
, |archive-url=
, |chapter-url=
, |lay-summary=
, etc.). The |url=
parameter and other URL parameters must begin with a supported URI scheme. The URI schemes http://
, https://
and the protocol relative scheme //
are most commonly used; irc://
, ircs://
, ftp://
, news:
, mailto:
and gopher://
are also supported.
The URL field is checked to ensure that it contains only Latin characters and does not contain spaces. The URL may be protocol relative (begins with //
). If there are no spaces and the URL is not protocol relative, then the scheme must comply with RFC 3986.[7]
Top- and second-level domain names are checked for proper form. Generally, top-level domain names must be two or more letters; second-level domain names must be two or more letters, digits, or hyphens (first and last character must be a letter or digit). Single-letter second-level domains are supported for:
- all ccTLDs (the country code is not validated)
- the .org TLD
- certain letters of the .com TLD (q, x, z)
- certain letters of the .net TLD (i, q)
Third- and subsequent-level domain names are not checked. The path portion of the URL is not checked.
To resolve this error, ensure that |url=
and other URL parameters contain valid URLs. Online tools are available to internationalize URLs that are written in non-Latin scripts:
- "IDN Conversion Tool". Verisign.
- "IDNA Conversion tool". IDNA-converter.com.
Pages with this error are automatically placed in Category:Pages with URL errors.[a]
Cite uses deprecated parameter |<param>
Cite uses deprecated parameter |<param>
Over time, some parameters have become obsolete or unnecessary. When this happens, the parameters are identified as deprecated. Editors are encouraged to use other parameters that accomplish the same purpose as those that have been deprecated. The CS1|2 deprecated parameters are listed in the following table, along with recommended replacement parameters. Parameter names are case-sensitive. Editors should expect that support for deprecated parameters will be withdrawn.
Deprecated parameter | Replace with |
---|---|
|
|
|city= |
|location= |
|version= in {{Cite arxiv}} |
Append version to arxiv or eprint (|arxiv=YYMM.NNNNNv1 ) |
in {{Cite interview}} |
|publisher= or |via= |
|program= in {{Cite interview}} |
|work= |
To resolve this error, use a supported parameter.
Pages with this error are automatically placed in Category:Pages containing cite templates with deprecated parameters.[a]
|coauthors=
requires |author=
|coauthor=
and |coauthors=
are deprecated parameters. Where they exist without accompanying |author=
, |authors=
, or |last=
, the content of |coauthor=
or |coauthors=
is not displayed.
To resolve this error, use |author1=
, |author2=
, etc., or use |last1=
, |first1=
, |last2=
, |first2=
, etc. to individually list all authors.
Pages with this error are automatically placed in Category:CS1 errors: coauthors without author.[a]
|contributor= ignored
|contributor=
ignored
Only used in book citations, |contributor=
identifies the author of a contribution, typically an afterword, forward, introduction, preface, etc., to another (primary) author's work. This error occurs when |contributor=
is used in a template that is not {{cite book}}
or {{citation}}
or is one of these two templates and one of the |work=
parameter aliases is set.
To resolve this error, choose a more appropriate CS1 or CS2 template or remove |contributor=
.
Pages with this error are automatically placed in Category:CS1 errors: contributor.[a]
|contributor= requires |<param>=
|contributor=
requires |author=
|contributor=
requires |contribution=
Only used in book citations, |contributor=
identifies the author of a contribution, typically an afterword, forward, introduction, preface, etc., to another (primary) author's work. As such, the primary author is required (|author=
or appropriate alias) as is the title of the contribution (|contribution=
).
To resolve this error, include the book's primary author in |author1=
, or |last1=
, |first1=
, or |vauthors=
and include the contribution title in |contribution=
; or remove |contributor=
.
Pages with this error are automatically placed in Category:CS1 errors: contributor.[a]
Empty citation
Empty citation
A Citation Style 1 or Citation Style 2 template marked as "Empty" contains no recognizable parameter identifiers. For example, this citation is marked as "empty" even though it contains usable information:
{{cite web | http://www.foobar.com | The Foobar Bar}}
The citation is "empty" because it does not contain the necessary parameter identifiers (in this case |url=
and |title=
) that tell {{cite web}}
how to use the information that the citation does contain.
A citation is also marked as "empty" when it contains only parameters that it doesn't recognize:
{{cite book |titolo=The Foobar Bar |anno=2015}}
This citation is empty because the Italian-language parameters |titolo=
and |anno=
are not recognized as valid parameter names on the English Wikipedia.
"Empty citation" may also mean that an editor meant to use another template entirely. Perhaps the editor used {{citation}}
when the intent was to use {{citation needed}}
or {{quote}}
.
To resolve this error, add appropriate parameter identifiers, translate foreign language parameter names to their English equivalents, or replace the CS1|2 template with a more appropriate template.
Pages with this error are automatically placed in Category:Pages with empty citations.[a]
External link in |<param>=
External link in |<param>=
This error occurs when any of the CS1 or CS2 citation title-holding parameters – |title=
, |chapter=
, |publisher=
, |work=
or any of its aliases: |journal=
, |magazine=
, |newspaper=
, |periodical=
and |website=
– hold an external link (URL). External links in these parameters corrupt the citation's metadata and can be the source of a variety of other error messages.
To resolve this error, remove the external link from the identified parameter. Consider placing the external link in a more appropriate parameter:
- for
|chapter=
, the URL may belong in|chapter-url=
. - for other parameters, it may belong in
|url=
.
Pages with this error are automatically placed in Category:CS1 errors: external links.[a]
|firstn= missing |lastn= in Authors/Editors list
|firstn=
missing |lastn=
in Authors list
|firstn=
missing |lastn=
in Editors list
Citation Style 1 and Citation Style 2 templates requires a |lastn=
parameter for each |firstn=
parameter in a citation. Author and editor lists are checked for proper last/first pairing. CS1|2 will emit this error message for the first mismatch it detects. If there are more last/first mismatches in a citation, subsequent mismatches are not detected.
There is no requirement that each |lastn=
have a matching |firstn=
.
The error message uses a sort of shorthand: |lastn=
can refer to any of the legitimate |author=
aliases in the authors list. Similarly, |lastn=
refers to any of the |editor-last=
aliases in the editors list.
To resolve this error, ensure that each |firstn=
has a corresponding |lastn=
.
Pages with this error are automatically placed in Category:CS1 errors: missing author or editor.[a]
|format= requires |url=
|format=
requires |url=
(error message hidden by default)
|...-format=
requires |...-url=
(error message hidden by default)
These errors occur when Citation Style 1 and Citation Style 2 templates use |format=
or |...-format=
without also providing a corresponding URL for |url=
or |...-url=
, respectively. The |format=
and |...-format=
parameters are used to specify the file format of a web resource (e.g. PDF, DOC, XLS, etc.). In some cases an editor may have intended to use |type=
to specify a kind of document (e.g. hard cover, paperback, pamphlet, etc.) The |format=
and |...-format=
value is always displayed.
The list of |...-format=
parameters is:
|archive-format=
,|chapter-format=
,|conference-format=
,|contribution-format=
,|event-format=
,|lay-format=
,|section-format=
,|transcript-format=
As of 29 November 2014, |chapter-format=
is a new parameter. Citations that relied on the old, somewhat odd use of |url=
and |format=
may need adjustment.
To resolve this error, remove |format=
or |chapter-format=
; define |url=
or |chapter-url=
; or change |format=
to |type=
(or to |chapter-format=
if |chapter-url=
is used without |url=
.
Pages with this error are automatically placed in Category:Pages using citations with format and no URL.[a]
Invalid <param>=<value>
Invalid |<param>=<value>
To function properly, some parameters are limited to a certain set of acceptable values. This error message indicates that a parameter has been assigned a value that is not a member of the parameter's defined set of acceptable values.
parameter | acceptable values |
---|---|
|dead-url= |
no , true , y , yes , unfit , usurped |
|df= |
dmy , dmy-all , mdy , mdy-all , ymd , ymd-all |
|ignore-isbn-error= |
true , y , yes |
|last-author-amp= |
|
|mode= |
cs1 , cs2 |
|name-list-format= |
vanc |
|nopp= |
true , y , yes |
|no-tracking= |
|
|registration= |
|
|subscription= |
|
|url-access= |
subscription , registration , limited |
|bibcode-access= |
free |
|doi-access= |
|
|hdl-access= |
|
|jstor-access= |
|
|ol-access= |
|
|osti-access= |
To resolve this error, use an appropriate value.
Pages with this error are automatically placed in Category:CS1 errors: invalid parameter value.[a]
Missing |lastn= in Authors/Editors list
Missing |lastn=
in Authors list
Missing |lastn=
in Editors list
So that all authors and editors are listed in a rendered citation, Citation Style 1 and Citation Style 2 templates requires n in |lastn=
(and its aliases) to increment by 1 for each author or editor. This error message is emitted when there is a 'hole' in the numbering (an author list made up of |author1=
and |author3=
but without |author2=
for example).
The test will not detect a 'hole' that is larger than 1. It is presumed that when |authorn=
and |authorn+1=
are both not present, then the test has reached the end of the list.
The error message uses a sort of shorthand: |lastn=
can refer to any of the legitimate |author=
aliases in the authors list. Similarly, |lastn=
refers to any of the |editor-last=
aliases in the editors list.
To resolve this error, ensure that the numbering of the |lastn=
parameters increments properly.
Pages with this error are automatically placed in Category:CS1 errors: missing author or editor.[a]
Missing or empty |title=
There are two slightly different error conditions that can arise when CS1 citations lack appropriate titles. In each case, CS1 reports this error message. The necessary resolution may vary depending on the cause of the error. The error message links to the appropriate description below.
Bare URL without a title
|<param>=
missing title
All Citation Style 1 and Citation Style 2 templates report this error when one of the URL-containing parameters cannot be paired with an associated title. This error may also occur when |title=
cannot be linked with |url=
because the citation also contains a conflicting |title-link=
parameter.
URL parameters | Title parameters |
---|---|
|archive-url= |
|title= |
|chapter-url= |
|chapter= , |contribution= , |entry= , |article= |
|conference-url= |
|conference= |
|contribution-url= |
|chapter= , |contribution= , |entry= , |article= |
|transcript-url= |
|transcript= |
|url= |
|title= |
A unique case exists: if |pmc=
has a value and |url=
is omitted or empty, then |title=
is linked with the same URL as the PMC.
Because URLs are ugly and generally uninformative, it is expected that editors should provide a meaningful title for each URL. In most cases this can be accomplished by using the |title=
parameter.
To resolve this error, provide an appropriate title for the URL-containing parameter. In the case where |url=
and |title-link=
are contending for |title=
you must choose which one to keep. Consider moving |url=
or |title-link=
to a more suitable parameter.
Pages with this error are automatically placed in Category:Pages with citations having bare URLs.[a]
Citation without a title of any form
Missing or empty |title=
This error occurs for Citation Style 1 and Citation Style 2 templates when all of the associated title parameters are omitted or left blank. Depending on the type of citation ({{cite web}}
, {{cite book}}
, {{cite journal}}
, etc.), the possible title parameters may include |title=
, |chapter=
, |article=
, |journal=
, |book-title=
, and so forth. At least one such title parameter must be provided for each citation.
{{cite episode}} will show this error if |series=
is blank (even if a |title=
is provided).
Sometimes this error occurs because an editor has used a CS1|2 citation as a shortened footnote when {{sfn}}
or one of the {{harv}}
family of templates would have been more appropriate. This error also occurs when an editor used {{citation}}
but intended to use {{citation needed}}
.
To resolve this error, provide a value for |title=
or replace the CS1|2 template with a more appropriate template. If you are listing a periodical or an issue of a periodical in a bibliography rather than within <ref>...</ref>
tags, {{List journal}}
may be more appropriate.
Pages with this error are automatically placed in Category:Pages with citations lacking titles.[a]
Missing or empty |url=
Missing or empty |url=
(error message hidden by default)
This error message is reported by {{cite web}}
, {{cite podcast}}
, and {{cite mailing list}}
when the template parameters |url=
and |archive-url=
are both missing, blank or not properly entered. Note that |website=
or |work=
is the name of the site, not the URL.
To resolve this error, provide a value for |url=
or use a more appropriate template such as {{cite book}}, {{cite journal}} or other Citation Style 1 or Citation Style 2 template.
Pages with this error are automatically placed in Category:Pages using web citations with no URL.[a]
More than one of |<param1>=, |<param2>=, and |<param3>= specified
More than one of |<param1>=
, |<param2>=
, and |<param3>=
specified
This error occurs when a Citation Style 1 or Citation Style 2 template includes more than one parameter that maps to the same meaning. For example, |author=
, |last=
, and |last1=
are all synonyms of each other, so no more than one of these parameters should ever be used in a single template.
To resolve this error, remove or modify the redundant parameter(s).
- More than one of author-name-list parameters specified
- More than one of editor-name-list parameters specified
This error occurs when a CS1 or CS2 template uses more than one type of author or editor name-list style. There are three kinds of incompatible author-name-list styles:
|authorn=
and|lastn=
/|firstn=
(and their various aliases),|vauthors=
, and|authors=
and similarly, three editor-name-list styles:
|editorn=
and|editor-lastn=
/|editor-firstn=
(and their various aliases),|veditors=
, and|editors=
To resolve this error, choose one name-list-style. Use the chosen style for both of the author and editor name-lists.
Pages with these errors are automatically placed in Category:Pages with citations having redundant parameters.[a]
Text "????" ignored
Text "????" ignored
Unlike many Wikipedia templates, the Citation Style 1 and Citation Style 2 templates do not use unnamed or positional parameters. When a citation contains text between vertical bars and that text does not contain an equal sign (=), CS1|2 ignores the text and reports the error. This is true even when the text is the name of a valid parameter.
This error can also be caused by vertical bars that are part of URLs or titles. When vertical bars occur in URLs, replace each vertical bar with %7c
. When vertical bars occur in parameter values that are not URLs, replace each vertical bar with |
.
To resolve this error, remove the extraneous text, add '=', add an appropriate parameter name from the template you're using to complete the parameter, or properly encode vertical bars in URLs and titles.
Pages with this error are automatically placed in Category:Pages with citations using unnamed parameters.[a]
|trans-<param>= requires |<param>=
|trans-title=
requires |title=
|trans-chapter=
requires |chapter=
Citation Style 1 and Citation Style 2 templates report this error when the citation has an English translation of the title in |trans-title=
or chapter title in |trans-chapter=
but does not have the original-language title in |title=
or original-language chapter title in |chapter=
.
To resolve this error, provide the original language title for |title=
or chapter title for |title=
. Consider adding |language=
if not already part of the citation.
Pages with this error are automatically placed in Category:CS1 errors: translated title.[a]
Unknown parameter |xxxx= ignored
Unknown parameter |xxxx=
ignored
Unknown parameter |xxxx=
ignored (|yyyy=
suggested)
Citation Style 1 and Citation Style 2 templates report this error when the name portion of a parameter's |name=value
pair is not recognized as a valid name. Typically, this is caused by spelling or capitalization errors.
With the old-style citation templates, it was possible to include information within the template that was simply ignored as unrecognized parameters. The Lua-based CS1|2 engine does not ignore unrecognized parameters. The purpose of the citation is to properly identify the source; not act as a repository of notes and ancillary information.
CS1|2 template parameters are lower case. CS1|2 will report this error when the parameter's name contains uppercase letters (Xxxx, xxXx, XXXX) but the parameter's name is defined as lowercase (xxxx). The identifier parameters, like |isbn=
, |pmc=
, |doi=
, etc., can be either lower case or upper case, but not of mixed case (|isbn=
or |ISBN=
but not |Isbn=
). For common parameter misspellings, like |pubisher=
instead of |publisher=
, CS1|2 will suggest a valid parameter name.
To resolve this error, replace the erroneous parameter name with a correct one, possibly using the suggested name. Ensure that the parameter's name is correctly spelled and that there are no characters except spaces between the parameter's name and the leading vertical bar (|) or trailing equals sign (=). A list of valid parameters can be found by consulting Help:Citation Style 1 or visiting the description page of the specific template being used, such as {{cite web}}
, {{cite book}}
, {{cite journal}}
, etc. Consider moving information associated with the unknown parameter into an appropriate parameter or to a section of the article's talk page for preservation.
Pages with this error are automatically placed in Category:Pages with citations using unsupported parameters.[a]
Unsupported parameter(s) in cite arXiv
Unsupported parameter(s) in cite arXiv
{{cite arxiv}}
uses a limited subset of the common Citation Style 1 parameters. This error message is emitted when parameters not in the {{cite arxiv}}
subset occur in a {{cite arxiv}}
template.
To resolve this error, remove the unsupported parameters. See Template:Cite arxiv for the complete list of supported parameters.
Pages with this error are automatically placed in Category:CS1 errors: arXiv.[a]
URL–wikilink conflict
URL–wikilink conflict
External links in a rendered citation are a combination of url-holding parameters, |url=
, |chapter-url=
, etc., with title-holding parameters, |title=
, |chapter=
, etc. Title-holding parameters may be wikilinked to another Wikipedia article but not when there is a matching url-holding parameter in the citation. When this condition occurs, the wikilink is suppressed, the wiki markup ignored, and the rendered citation links to the external site.
Some templates will also cause this error if they are part of a title-holding parameter. The error occurs when the template produces wikilinked content. For example, {{lang}}
templates output a wikilinked category. Templates in url-holding parameters may also corrupt the citation's COinS metadata. As a general rule, avoid using templates in title-holding parameters unless you know that the template's affects are entirely visual ({{!}}
and the like).
This type of error may also occur in identifier-based templates ({{cite doi}}
, etc.). When this happens, the error message is shown in the article but the error is actually located in the identifier-based citation template.
To resolve this error, remove wikilinks from title-holding parameters that are intended to be externally linked or remove the external URL, which will allow the internal wikilinks to work as expected. If wikilink-producing templates are important to the citation, move them out of the CS1 template but leave them inside the citation's <ref>...</ref>
tags. Some of the functionality provided by templates may also be available through CS1 parameters.
To resolve errors in identifier-based citation templates, the template must be edited to correct the error. Exercise caution when editing these templates because identifier-based citation templates are often used in multiple articles.
Pages with this error are automatically placed in Category:CS1 errors: URL–wikilink conflict.[a]
Vancouver style error
Vancouver style error
This error is reported for citations that use |name-list-format=vanc
. Vancouver style restricts author or editor names to the Latin alphabet. For the purposes of this test, Module:Citation/CS1 defines the Latin alphabet as the letters defined in the Unicode Latin character sets:
- C0 Controls and Basic Latin[8] (0041–005A, 0061–007A)
- C1 Controls and Latin-1 Supplement[9] (00C0–00D6, 00D8–00F6, 00F8–00FF)
- Latin Extended-A[10] (0100–017F)
- Latin Extended-B[11] (0180–01BF, 01C4–024F)
This error is also reported when a corporate or institutional author is listed in |vauthors=
without proper delimiters. Corporate authors should be listed this way:
|vauthors=First Surname FM, Surname AB,
((Corporate or institutional Author)), Lastsurname XY
This error is also reported when more than two initials are used: in case of more than two initials, list only the first two.
While normally correct, sometimes the names listed on a PMID page contain errors when the author surname has a lowercase nobiliary particle. For example, PMID 17726700 lists Magnus von Knebel Doeberitz as Doeberitz Mv which is not correct. This author's name should be listed as |vauthors=von Knebel Doeberitz M
.[12]
Certain punctuation will be flagged as an error. For example, Unicode U+2019, right single quotation mark, causes an error because it is not a member of the Latin character sets identified above: |vauthors=Van’t Veer M
. Replace this character with the straight (or typewriter) apostrophe: |vauthors=Van't Veer M
.
To resolve this error, Romanize author and editor names.[13] Romanizing can result in two-letter initials, for example, the Greek letter 'Θ' Romanizes to 'Th'.[14] When author names have this kind of initial, Module:Citation/CS1 can't know if this kind of initial is a typo or a legitimate Romanized character so it will emit the Vancouver error. To suppress the error after determining that the two-character initial is correct and not a typo, treat the name as if it were a corporate name by wrapping it in doubled parentheses: |vauthors=..., Tatarinov IuS, ...
→ |vauthors=..., ((Tatarinov IuS)), ...
Similarly, Chinese hyphenated given names may appear in PubMed listings. For example: 'Wang Hsien-yu' may be listed on PubMed as 'Wang Hy' which will result in a Vancouver error. When this occurs, and upon verification that such names are correct, wrap them in doubled parentheses.
Pages with this error are automatically placed in Category:CS1 errors: Vancouver style.[a]
<char> character in |<param>= at position n
<char> character in |<param>=
at position n
This error is reported for citations with parameter values that contain invisible or non-printable characters; the error includes the position at which the character can be found. Module:Citation/CS1 detects parameter values that contain any of these characters:
- replacement character, U+FFFD
- hair space, U+200A
- zero width space, U+200B
- zero width joiner, U+200D
- soft hyphen, U+00AD
- horizontal tab, U+0009 (HT)
- line feed, U+0010 (LF)
- carriage return, U+0013 (CR)
- delete character, U+007F (DEL)
- C0 control, U+0000–U+001F (NULL–US)
- C1 control, U+0080–U+009F (XXX–APC)
To resolve invisible-character errors, remove or replace the identified character. Because these characters are mostly invisible, the error message identifies the character's position in the parameter value counted from the left. Space characters between the assignment operator (the '=' sign) and the parameter value are not counted.
<name> stripmarker in |<param>=
at position n
Stripmarkers are special sequences of characters that MediaWiki inserts as a place-holder for certain xml-like tags. These tags include <gallery>...</gallery>
, <math>...</math>
, <nowiki>...</nowiki>
, <pre>...</pre>
, and <ref>...</ref>
. The stripmarkers are replaced with content before the final page rendering. The module ignores math and nowiki stripmarkers.
To resolve stripmarker errors, remove or replace the identified tag. The error message identifies the stripmarker's position in the parameter value counted from the left. Space characters between the assignment operator (the '=' sign) and the parameter value are not counted.
Pages with this error are automatically placed in Category:CS1 errors: invisible characters.[a]
|<param>-access= requires |<param>=
|<param>-access=
requires |<param>=
This error is reported when an access level has been specified for some external link, but the corresponding required parameter is missing or empty. The parameter can be one of
specifier | required parameter |
---|---|
|url-access= |
|url= |
|bibcode-access= |
|bibcode= |
|doi-access= |
|doi= |
|hdl-access= |
|hdl= |
|jstor-access= |
|jsor= |
|ol-access= |
|ol= |
|osti-access= |
|osti= |
To resolve this error, either provide a value for the parameter, or remove the access level specification.
Pages with this error are automatically placed in Category:CS1 errors: param-access.[a]
Notes
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak al am an ao ap aq ar as at au Pages in the Book talk, Category talk, Draft, Draft talk, Education Program talk, File talk, Help talk, MediaWiki talk, Module talk, Portal talk, Talk, Template talk, TimedText talk, User, User talk, and Wikipedia talk namespaces are not included in the error tracking categories.
References
- ^ a b "archive.org website".
- ^ a b "webcitation.org website".
- ^ "Understanding the arXiv identifier". Cornell University Library. Retrieved 2014-08-20.
- ^ "1.2.3 - Bibliographic Identifiers". The SAO/NASA Astrophysics Data System.
- ^ "The LCCN Namespace". Network Development and MARC Standards Office. Library of Congress. November 2003.
- ^ "Netnews Article Format". Internet Engineering Task Force. November 2009. 3.1.3. RFC 5536
.
- ^ "Scheme". Uniform Resource Identifier (URI): Generic Syntax. Internet Engineering Task Force. January 2005. RFC 3986
.
- ^ "C0 Controls and Basic Latin" (PDF). Unicode. Retrieved 2015-04-19.
- ^ "C1 Controls and Latin-1 Supplement" (PDF). Unicode. Retrieved 2015-04-19.
- ^ "Latin Extended-A" (PDF). Unicode. Retrieved 2015-04-19.
- ^ "Latin Extended-B" (PDF). Unicode. Retrieved 2015-04-19.
- ^ "Other surname rules". National Center for Biotechnology Information.
- ^ Patrias K (2007). "Names in non-roman alphabets or character-based languages". In Wendling D. Citing Medicine: The NLM Style Guide for Authors, Editors, and Publishers [Internet]. (2nd ed.). Bethesda: National Library of Medicine.
- ^ "Greek" (PDF). Library of Congress.