This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (February 2009)

Windsor knot
Typical use	Formal occasions[citation needed]

The Windsor knot, also referred to as a Full Windsor or as a Double Windsor to distinguish it from the half-Windsor, is a method of tying a necktie around one's neck and collar. The Windsor knot, compared to other methods, produces a wide symmetrical triangular knot. The knot is often thought to be named after the Duke of Windsor (King Edward VIII after his abdication). It was, however, likely invented by his father George V.^[1] The Duke preferred a wide knot and had his ties specially made with thicker cloth in order to produce a wider knot when tied with the conventional four in hand knot. The Windsor knot was invented to emulate the Duke's wide knot with regular ties. The Windsor knot is worn on more formal occasions,^{[citation needed]} and it is especially suited for a spread or cutaway collar that can properly accommodate a larger knot. For correct wear the tie used for a windsor knot should be about 4 centimetres or 1.6 inches longer than a conventional tie. The Windsor knot is the only tie knot that is to be used by all personnel in the Royal Air Force and the Royal Air Force Cadets (ATC and CCF(RAF)) in the UK when wearing their black tie while in uniform. The Windsor knot is the tie knot used by the Canadian Forces, regardless of service.

Description[link]

When tied correctly the knot is tight and does not slip away from the collar during wear. It is very comfortable to wear, as the knot itself will hold the tie firmly in place while still keeping space between the collar and the neck.

The knot is symmetrical, well balanced, and self-releasing^{[clarification needed]}. It is a large knot, which amply displays the fabric and design of the tie when wearing a closed jacket or coat, and helps keep the throat area warm during the colder winter months.

A large knot can distract attention away from the wearer's face; therefore, a Windsor best compliments a strong square or round face, or those sporting facial hair.

James Bond never trusted a man who boasted a Windsor Knot; "It was tied with a Windsor knot. Bond mistrusted anyone who tied his tie with a Windsor knot. It showed too much vanity. It was often the mark of a cad." -From Russia With Love

Tying[link]

To tie the Windsor, place the tie around your neck and cross the broad end of the tie in front of the narrow end. Then fold the broad end behind the narrow end and push it up through the inside of the loop around your neck. The left and right sides of the narrow end, and the inside of the loop, now form a triangle. The third and fourth folds should complete one rotation around the outside of the knot. The fifth fold brings the broad end over the top of the knot from the front to the back. The sixth and seventh folds again complete one rotation around the knot. The eighth fold should again bring the broad end up over the top of the knot from behind; push the end down through the loop in front of the knot that you made with the seventh fold, work out any wrinkles, and pull the knot tight. If the tie is unbalanced, untie the knot and try again giving yourself more or less length to work with.

In The 85 Ways to Tie a Tie, by Thomas Fink and Yong Mao, the Windsor knot is listed as "knot 31" and tied, in that book's notation, as follows:

• Li Co Ri Lo Ci Ro Li Co T

Fink and Mao list the following as common variations on the Windsor:

• Li Co Li Ro Ci Lo Ri Co T (knot 32) (the "Persian Knot")

• Li Co Ri Lo Ci Lo Ri Co T (knot 33)

• Li Co Li Ro Ci Ro Li Co T (knot 35, shown as "the Windsor Knot" in the image immediately below).

Step by step guide to tying the Windsor knot

This is a guide for a "softer" knot (in Fink and Mao's notation Li Ro Li Ro Ci Ro Li Co T):

Step by step guide to tying an alternative Windsor knot

See also[link]

• Half-Windsor knot – a narrower knot which references the name, as it only brings up around the loop on one side rather than both.
• List of knots

References[link]

External links[link]

• Neckties at the Open Directory Project

Some knots

1. Yarn knot ABoK #2688
2. Manrope knot
3. Granny knot
4. Rosebud stopper knot (?)
5. Matthew Walker's knot
6. Shroud knot
7. Turks head knot
8. Overhand knot, Figure-of-eight knot
9. Reef knot, Square knot
10. Two half hitches

A knot is a method of fastening or securing linear material such as rope by tying or interweaving. It may consist of a length of one or several segments of rope, string, webbing, twine, strap, or even chain interwoven such that the line can bind to itself or to some other object—the "load". Knots have been the subject of interest for their ancient origins, their common uses, and the area of mathematics known as knot theory.

Use[link]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2011)

There is a large variety of knots, each with properties that make it suitable for a range of tasks. Some knots are used to attach the rope (or other knotting material) to other objects such as another rope, cleat, ring, or stake. Some knots are used to bind or constrict objects. Decorative knots usually bind to themselves to produce attractive patterns.

Teaching[link]

Sailors learning knots and ropework in the early 20th century

While some people can look at diagrams or photos and tie the illustrated knots, others learn best by watching how a knot is tied. Knot tying skills are often transmitted by sailors, scouts, climbers, cavers, arborists, rescue professionals, fishermen, linemen and surgeons.

Applications[link]

Truckers in need of securing a load may use a trucker's hitch, gaining mechanical advantage. Knots can save a spelunker from finding himself buried under rock. Many knots can also be used as makeshift tools, for example, the Bowline can be used as a rescue loop, and the Munter hitch can be used as a belay. The Diamond hitch was widely used to tie packages on to donkeys and mules.

In hazardous environments such as mountains, knots are very important. In the event of someone falling into a ravine or a similar terrain feature, with a rope or two, some carabineers, and knowledge of knots you can set up a rappel system to lower yourself down to the individual and set up a hauling system to allow another individual to pull you and the injured person out of the ravine. Further application of knots includes developing a high line, which is basically equivalent to a zip line. Using the high line you can move supplies, injured people, or those lacking training in rappelling and rock climbing across a river or a large crevice or ravine. Note the systems mentioned typically require carabineers and the use of multiple useful knots. These knots include the bowline, double figure eight, munter hitch, munter mule, prusik, autoblock, and clove hitch. Thus any individual who goes into a mountainous environment should have basic knowledge of knots and knot systems to increase safety and the ability to do interesting activities such as rappelling.

Knots can be applied in combination to produce complex objects such as lanyards and netting. In ropework, the frayed end of a rope is held together by a type of knot called a whipping knot. Many types of textiles use knots to repair damage. Macrame, one kind of textile, is generated exclusively through the use of knotting, instead of knits, crochets, weaves or felting. Macramé can produce self-supporting three dimensional textile structures, as well as flat work, and is often used ornamentally or decoratively.

Properties[link]

Strength[link]

Knots weaken the rope in which they are made.^[1] When knotted rope is strained to its breaking point, it almost always fails at the knot or close to it, unless it is defective or damaged elsewhere. The bending, crushing, and chafing forces that hold a knot in place also unevenly stress rope fibers and ultimately lead to a reduction in strength. The exact mechanisms that cause the weakening and failure are complex and are the subject of continued study.

Relative knot strength, also called knot efficiency, is the breaking strength of a knotted rope in proportion to the breaking strength of the rope without the knot. Determining a precise value for a particular knot is difficult because many factors can affect a knot efficiency test: the type of fiber, the style of rope, the size of rope, whether it is wet or dry, how the knot is dressed before loading, how rapidly it is loaded, whether the knot is repeatedly loaded, and so on. The efficiency of common knots ranges between 40—80% of the rope's original strength.^[2]

In most situations forming loops and bends with conventional knots is far more practical than using rope splices, even though the latter can nearly maintain the rope's full strength. Prudent users allow for a large safety margin in the strength of rope chosen for a task due to the weakening effects of knots, aging, damage, shock loading, etc. The working load limit of a rope is generally specified with a significant safety factor, up to 15:1 for critical applications.^[3] For life-threatening applications, other factors come into play.

Security[link]

Even if the rope does not break, a knot may still fail to hold. Knots that hold firm under a variety of adverse conditions are said to be more secure than those that do not. The main ways knots fail to hold are:

Slipping[link]

The load creates tension that pulls the rope back through the knot in the direction of the load. If this continues far enough, the working end passes into the knot and the knot unravels and fails. This behavior can worsen when the knot is repeatedly strained and let slack, dragged over rough terrain, or repeatedly struck against hard objects such as a masts and flagpoles.

Even with secure knots, slippage may occur when the knot is first put under real tension. This can be mitigated by leaving plenty of rope at the working end outside of the knot, and by dressing the knot cleanly and tightening it as much as possible before loading. Sometimes, the use of a stopper knot or, even better, a backup knot can prevent the working end from passing through the knot; but if a knot is observed to slip, it is generally preferable to use a more secure knot. Life-critical applications often require backup knots to maximize safety.

Capsizing[link]

Bowline

Capsizing (or spilling) a knot refers to changing a knot's form and rearranging its parts, usually by pulling on specific ends in certain ways.^[2] When used inappropriately, some knots tend to capsize easily or even spontaneously. Often the capsized form of the knot offers little resistance to slipping or unraveling. A Reef Knot, when misused as a bend, can capsize dangerously.

Sometimes a knot is intentionally capsized as a method of tying another knot, as with the "lightning method" of tying a Bowline. Some knots, such as the Carrick Bend, are generally tied in one form then capsized to obtain a stronger or more stable form.

Sliding[link]

In knots that are meant to grip other objects, failure can be defined as the knot moving relative to the gripped object. While the knot itself does not fail, it ceases to perform the desired function. For instance, a simple Rolling Hitch tied around a railing and pulled parallel to the railing might hold up to a certain tension, then start sliding. Sometimes this problem can be corrected by working-up the knot tighter before subjecting it to load, but usually the problem requires either a knot with more wraps or a rope of different diameter or material.

Releasability[link]

Knots differ in the effort required to untie them after loading. Knots that are very difficult to untie, such as the water knot, are said to "jam". Knots that come untied with less difficulty, such as the Zeppelin bend, are referred to as "non-jamming".

Components[link]

Knot components

A	Turn
B	Round turn
C	Two round turns

[edit] Bight

Any curved section, slack part, or loop between the ends of a rope, string, or yarn

Bitter end[link]

More a ropeworker's term than a knot term, it refers to the end of a rope that is tied off, hence the expression "hanging on to the bitter end".^{[citation needed]} A bitt is a metal block with a crosspin used for tying lines to, found on piers. In fact the bitter end is the end of the anchor "cable" that connects to the anchor bitts in the cable locker under the forecastle or poop using the bitter pin. (British nautical usage). Other uses may be borrowed from this derivation.

Loop[link]

A full circle formed by passing the working end over itself

Elbow[link]

Two crossing points created by an extra twist in a loop

Standing end[link]

The standing end is the longer end of the rope not involved in the knot, often shown as unfinished. It is often (but not always) the end of the rope under load after the knot is complete. For example, when a clove hitch ties a boat to a pier, the end going to the boat is the standing end.

Standing part[link]

Section of line between knot and the standing end (seen above)

[edit] Turn

A turn or single turn is a single pass behind or through an object.

A round turn is the complete encirclement of an object; requires two passes.

Two round turns circles the object twice; requires three passes.

Working end[link]

The active end of a line used in making the knot. May also be called the 'running end', 'live end', or 'tag end'.

Working part[link]

Section of line between knot and the working end

Categories[link]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. (July 2011)

Further information: List of knot terminology

The list of knots is extensive, but common properties allow for a useful system of categorization. For example, loop knots share the attribute of having some kind of an anchor point constructed on the standing end (such as a loop or overhand knot) into which the working end is easily hitched to using a round turn. An example of this is the bowline. Constricting knots often rely on friction to cinch down tight on loose bundles; an example is the Miller's knot. Knots may belong to more than one category.

Bend 

A knot uniting two lines (for knots joining two ends of the same line, see binding knots or loops). List of bends.

Binding 

A knot that restricts object(s) by making multiple winds. List of binding knots.

Coil 

Knots used to tie up lines for storage. Another handy coil is here.

Decorative knot 

A complex knot exhibiting repeating patterns often constructed around and enhancing an object. List of decorative knots.

Hitch 

A knot tied to a post, cable, ring, or spar. List of hitch knots.

Lashing 

A knot used to hold (usually) poles together. List of lashing knots.

Loop 

A knot used to create a closed circle in a line. List of loop knots.

Plait (or braid)

A number of lines interwoven in a simple regular pattern. List of plait knots.

Slip (or running) 

A knot tied with a hitch around one of its parts. In contrast, a loop is closed with a bend. While a slip knot can be closed, a loop remains the same size. List of slip knots.

Slipped 

Some knots may be finished by passing a bight rather than the end, for ease of untying. The common shoelace knot is an example, being a reef knot with both ends slipped.

Seizing 

A knot used to hold two lines or two parts of the same line together. List of seizing knots.

Sennit 

A number of lines interwoven in a complex pattern. See also Chain sinnet.

Splice 

A knot formed by interweaving strands of rope rather than whole lines. More time-consuming but usually stronger than simple knots. List of splices.

Stopper 

A knot tied to hold a line through a hole.

Trick 

A knot that is used as part of a magic trick, a joke, or a puzzle. List of trick knots.

Whipping 

A binding knot used to prevent another line from fraying.

Basic useful knots[link]

• Alpine butterfly knot for a secure loop in the middle of a rope when the ends aren't free
• Bowline for tying a loop in the end of a rope, as around one's waist or to secure a ring or grommet. The knot is also used as an anchor knot and is used in many knot systems that are used in mountainous terrain such as a highline or hauling system.
• Constrictor knot for making bundles or cinching the neck of a sack
• Figure-of-eight knot as a stopper
• Monkey's fist used to haul a heavier rope
• Prusik for ascending a rope
• Sheet bend for joining the ends of two ropes, which need not be the same diameter
• Double sheet bend for tying the ends of two dissimilarly sized ropes together
• Spanish bowline Used to hoist crewmen aloft or suspend them over the side
• Square knot, a binding knot for joining the ends of a piece of cordage wrapped around an object or objects
• Versatackle hoist heavy loads and tighten rigging
• Water knot for tying a knot in flat material such as nylon webbing

Hitches[link]

• Buntline hitch for tying a rope to a pole
• Diamond hitch for packing trail animals
• Midshipman's Hitch (also known as a Taut-line Hitch, below)
• Rolling hitch for securing a rope to a pole, or one rope to the middle of another
• Taut-line hitch for forming an adjustable loop that keeps its size under tension
• Timber hitch for securing or hauling long narrow loads
• Trucker's hitch for clinching down a load

Knot theory[link]

A trefoil knot is a mathematical version of an overhand knot.

Knot theory is a branch of topology. It deals with the mathematical analysis of knots, their structure and properties, and with the relationships between different knots. In topology, a knot is a figure consisting of a single loop, abstracted from any physical rope or line, with any number of crossing or "knotted" elements. As such, it has no proper ends, and cannot be undone or untied. Various mathematical techniques are used to classify and distinguish knots. For instance, the Alexander polynomial can be used to distinguish the trefoil knot from the figure-eight knot and the unknot (a simple loop).^{[citation needed]}

See also[link]

• Chinese knotting
• List of decorative knots
• List of knots
• List of knot terminology
• Knot (mathematics)
• Quipu
• Round turn and two half-hitches

References[link]

Footnotes[link]

Notations[link]

• Clifford W. Ashley. The Ashley Book of Knots. Doubleday, New York. ISBN 0-385-04025-3
• Geoffrey Budworth (1999). The Ultimate Encyclopedia of Knots & Ropework. Annes Publishing Limited. ISBN 1-55267-986-1
• John Cassidy (1985). The Klutz Book of Knots. Klutz Press, Palo Alto, California. ISBN 0-932592-10-4
• Cyrus L. Day. Knots & Splices. International Marine/McGraw-Hill Companies. ISBN 0-87742-252-4
• Raoul Graumont. Handbook of Knots. Cornell Maritime Press/Tidewater Publishers. ISBN 0-87033-030-6
• R.S. Lee. All The Knots You Need. Algrove Publishing. ISBN 0-921335-47-4
• Allen Padgett and Bruce Smith. On Rope. National Speleological Society. ISBN 0-9615093-2-5
• Des Pawson (2001). Pocket Guide to Knots & Splices. Produced for Propsero Books by RPC Publishing Ltd., London. ISBN 1-55267-218-2
• Brion Toss. The Complete Rigger's Apprentice. International Marine/McGraw-Hill Companies. ISBN 0-07-064840-9
• J.C. Turner and P. van de Griend (ed.) (1996). History and Science of Knots. World Scientific. ISBN 981-02-2469-9

External links[link]

Wikibooks has a book on the topic of Simplified list of knots

Wikimedia Commons has media related to: Knots

• Knots at the Open Directory Project
• The short film Knots, Bends And Hitches (1973) is available for free download at the Internet Archive [more]
• Over 350 Knot Videos - videos are demonstrating animated knots tying