Biological half-life

The biological half-life or terminal half-life of a substance is the time it takes for a substance (for example a metabolite, drug, signalling molecule, radioactive nuclide, or other substance) to lose half of its pharmacologic, physiologic, or radiologic activity, according to the Medical Subject Headings (MeSH) definition. Typically, this refers to the body's cleansing through the function of kidneys and liver in addition to excretion functions to eliminate a substance from the body. In a medical context, half-life may also describe the time it takes for the blood plasma concentration of a substance to halve (plasma half-life) its steady-state. The relationship between the biological and plasma half-lives of a substance can be complex depending on the substance in question, due to factors including accumulation in tissues (protein binding), active metabolites, and receptor interactions.

Biological half-life is an important pharmacokinetic parameter and is usually denoted by the abbreviation $t_{\frac {1}{2}}$$t_{\frac {1}{2}}$.

While a radioactive isotope decays perfectly according to first order kinetics where the rate constant is fixed, the elimination of a substance from a living organism follows more complex chemical kinetics. See Rate equation.

Examples

Water

The biological half-life of water in a human is about 7 to 14 days. It can be altered by behavior. Drinking large amounts of alcohol will reduce the biological half-life of water in the body. This has been used to decontaminate humans who are internally contaminated with tritiated water (tritium). The basis of this decontamination method (used at Harwell) is to increase the rate at which the water in the body is replaced with new water.

Alcohol

The removal of ethanol (drinking alcohol) through oxidation by alcohol dehydrogenase in the liver from the human body is limited. Hence the removal of a large concentration of alcohol from blood may follow zero-order kinetics. Also the rate-limiting steps for one substance may be in common with other substances. For instance, the blood alcohol concentration can be used to modify the biochemistry of methanol and ethylene glycol. In this way the oxidation of methanol to the toxic formaldehyde and formic acid in the human body can be prevented by giving an appropriate amount of ethanol to a person who has ingested methanol. Note that methanol is very toxic and causes blindness and death. A person who has ingested ethylene glycol can be treated in the same way. Half life is also relative to the subjective metabolic rate of the individual in question.

Common prescription medications

Substance	Biological half-life
Adenosine	<10 seconds
Norepinephrine	2 minutes
Oxaliplatin	14 minutes
Salbutamol	1.6 hours
Zaleplon	1–2 hours
Morphine	2–3 hours
Methotrexate	3–10 hours (lower doses), 8–15 hours (higher doses)
Phenytoin	12–42 hours
Methadone	15 hours to 3 days, in rare cases up to 8 days
Buprenorphine	16–72 hours
Clonazepam	18–50 hours
Diazepam	20–100 hours (active metabolite, nordazepam 1.5–8.3 days)
Flurazepam	0.8–4.2 days (active metabolite, desflurazepam 1.75–10.4 days)
Donepezil	70 hours (approx.)
Fluoxetine	4–6 days (active lipophilic metabolite 4–16 days)
Dutasteride	5 weeks
Amiodarone	25–110 days
Bedaquiline	5.5 months

Metals

The biological half-life of caesium in humans is between one and four months. This can be shortened by feeding the person prussian blue. The prussian blue in the digestive system acts as a solid ion exchanger which absorbs the caesium while releasing potassium ions.

For some substances, it is important to think of the human or animal body as being made up of several parts, each with their own affinity for the substance, and each part with a different biological half-life (physiologically-based pharmacokinetic modelling). Attempts to remove a substance from the whole organism may have the effect of increasing the burden present in one part of the organism. For instance, if a person who is contaminated with lead is given EDTA in a chelation therapy, then while the rate at which lead is lost from the body will be increased, the lead within the body tends to relocate into the brain where it can do the most harm.

• Polonium in the body has a biological half-life of about 30 to 50 days.
• Caesium in the body has a biological half-life of about one to four months.
• Mercury (as methylmercury) in the body has a half-life of about 65 days.
• Lead in the blood has a half life of 28–36 days.
• Lead in bone has a biological half-life of about ten years.
• Cadmium in bone has a biological half-life of about 30 years.
• Plutonium in bone has a biological half-life of about 100 years.
• Plutonium in the liver has a biological half-life of about 40 years.

Peripheral half-life

Some substances may have different half-lives in different parts of the body. For example, oxytocin has a half-life of typically about three minutes in the blood when given intravenously. Peripherally administered (e.g. intravenous) peptides like oxytocin cross the blood-brain-barrier very poorly, although very small amounts (< 1%) do appear to enter the central nervous system in humans when given via this route. In contrast to peripheral administration, when administered intranasally via a nasal spray, oxytocin reliably crosses the blood–brain barrier and exhibits psychoactive effects in humans. In addition, also unlike the case of peripheral administration, intranasal oxytocin has a central duration of at least 2.25 hours and as long as 4 hours. In likely relation to this fact, endogenous oxytocin concentrations in the brain have been found to be as much as 1000-fold higher than peripheral levels.

Rate equations

First-order elimination

There are circumstances where the half-life varies with the concentration of the drug. Thus the half-life, under these circumstances, is proportional to the initial concentration of the drug A₀ and inversely proportional to the zero-order rate constant k₀ where:

$t_{\frac {1}{2}}={\frac {0.5A_{0}}{k_{0}}}\,$$t_{\frac {1}{2}}={\frac {0.5A_{0}}{k_{0}}}\,$

This process is usually a logarithmic process - that is, a constant proportion of the agent is eliminated per unit time. Thus the fall in plasma concentration after the administration of a single dose is described by the following equation:

$C_{t}=C_{0}e^{-kt}\,$$C_{t}=C_{0}e^{-kt}\,$

• C_t is concentration after time t
• C₀ is the initial concentration (t=0)
• k is the elimination rate constant

The relationship between the elimination rate constant and half-life is given by the following equation:

$k={\frac {\ln 2}{t_{\frac {1}{2}}}}\,$$k={\frac {\ln 2}{t_{\frac {1}{2}}}}\,$

Half-life is determined by clearance (CL) and volume of distribution (V_D) and the relationship is described by the following equation:

$t_{\frac {1}{2}}={\frac {{\ln 2}\cdot {V_{D}}}{CL}}\,$$t_{\frac {1}{2}}={\frac {{\ln 2}\cdot {V_{D}}}{CL}}\,$

In clinical practice, this means that it takes 4 to 5 times the half-life for a drug's serum concentration to reach steady state after regular dosing is started, stopped, or the dose changed. So, for example, digoxin has a half-life (or t_½) of 24–36 h; this means that a change in the dose will take the best part of a week to take full effect. For this reason, drugs with a long half-life (e.g., amiodarone, elimination t_½ of about 58 days) are usually started with a loading dose to achieve their desired clinical effect more quickly.

Sample values and equations

Characteristic	Description	Example value	Symbol	Formula
Dose	Amount of drug administered.	500 mg	$D$$D$	Design parameter
Dosing interval	Time between drug dose administrations.	24 h	$\tau$$\tau$	Design parameter
Cmax	The peak plasma concentration of a drug after administration.	60.9 mg/L	$C_{\text{max}}$$C_{\text{max}}$	Direct measurement
tmax	Time to reach Cmax.	3.9 h	$t_{\text{max}}$$t_{\text{max}}$	Direct measurement
Cmin	The lowest (trough) concentration that a drug reaches before the next dose is administered.	27.7 mg/L	$C_{{\text{min}},{\text{ss}}}$$C_{{\text{min}},{\text{ss}}}$	Direct measurement
Volume of distribution	The apparent volume in which a drug is distributed (i.e., the parameter relating drug concentration to drug amount in the body).	6.0 L	$V_{\text{d}}$$V_{\text{d}}$	$={\frac {D}{C_{0}}}$$={\frac {D}{C_{0}}}$
Concentration	Amount of drug in a given volume of plasma.	83.3 mg/L	$C_{0},C_{\text{ss}}$$C_{0},C_{\text{ss}}$	$={\frac {D}{V_{\text{d}}}}$$={\frac {D}{V_{\text{d}}}}$
Elimination half-life	The time required for the concentration of the drug to reach half of its original value.	12 h	$t_{\frac {1}{2}}$$t_{\frac {1}{2}}$	$={\frac {\ln(2)}{k_{\text{e}}}}$$={\frac {\ln(2)}{k_{\text{e}}}}$
Elimination rate constant	The rate at which a drug is removed from the body.	0.0578 h−1	$k_{\text{e}}$$k_{\text{e}}$	$={\frac {\ln(2)}{t_{\frac {1}{2}}}}={\frac {CL}{V_{\text{d}}}}$$={\frac {\ln(2)}{t_{\frac {1}{2}}}}={\frac {CL}{V_{\text{d}}}}$
Infusion rate	Rate of infusion required to balance elimination.	50 mg/h	$k_{\text{in}}$$k_{\text{in}}$	$=C_{\text{ss}}\cdot CL$$=C_{\text{ss}}\cdot CL$
Area under the curve	The integral of the concentration-time curve (after a single dose or in steady state).	1,320 mg/L·h	$AUC_{0-\infty }$$AUC_{0-\infty }$	$=\int _{0}^{\infty }C\,\operatorname {d} t$$=\int _{0}^{\infty }C\,\operatorname {d} t$
			$AUC_{\tau ,{\text{ss}}}$$AUC_{\tau ,{\text{ss}}}$	$=\int _{t}^{t+\tau }C\,\operatorname {d} t$$=\int _{t}^{t+\tau }C\,\operatorname {d} t$
Clearance	The volume of plasma cleared of the drug per unit time.	0.38 L/h	$CL$$CL$	$=V_{\text{d}}\cdot k_{\text{e}}={\frac {D}{AUC}}$$=V_{\text{d}}\cdot k_{\text{e}}={\frac {D}{AUC}}$
Bioavailability	The systemically available fraction of a drug.	0.8	$f$$f$	$={\frac {AUC_{\text{po}}\cdot D_{\text{iv}}}{AUC_{\text{iv}}\cdot D_{\text{po}}}}$$={\frac {AUC_{\text{po}}\cdot D_{\text{iv}}}{AUC_{\text{iv}}\cdot D_{\text{po}}}}$
Fluctuation	Peak trough fluctuation within one dosing interval at steady state	41.8 %	$\%PTF$$\%PTF$	$={\frac {C_{{\text{max}},{\text{ss}}}-C_{{\text{min}},{\text{ss}}}}{C_{{\text{av}},{\text{ss}}}}}\cdot 100$$={\frac {C_{{\text{max}},{\text{ss}}}-C_{{\text{min}},{\text{ss}}}}{C_{{\text{av}},{\text{ss}}}}}\cdot 100$ where $C_{{\text{av}},{\text{ss}}}={\frac {1}{\tau }}AUC_{\tau ,{\text{ss}}}$$C_{{\text{av}},{\text{ss}}}={\frac {1}{\tau }}AUC_{\tau ,{\text{ss}}}$

See also

• Half-life, pertaining to the general mathematical concept in physics or pharmacology.
• Effective half-life