- published: 25 Aug 2016
- views: 1738
Create your page here
-
remove the playlistMsc Marc
-
remove the playlistLatest Videos
-
remove the playlistLongest Videos
- remove the playlistMsc Marc
- remove the playlistLatest Videos
- remove the playlistLongest Videos
back to playlist
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use.
Key highlights of this release include:
1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers
2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals.
3. Contact Performance - Improve productivity with performance and ease of set up enhancements
4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
- published: 22 Feb 2013
- views: 5193
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
- published: 16 May 2016
- views: 522
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis.
Watch this webcast to...
Learn about the common tests used for material characterization;
Learn how to convert data to material coefficients required for FEA;
Demonstration of curve fitting process
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MAR_02_20120417_GEN
- published: 16 Jul 2012
- views: 4605
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
- published: 17 Jun 2009
- views: 24807
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
- published: 21 Oct 2009
- views: 2677
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis.
Watch this webcast to...
Learn about the creep models;
Learn how to model creep in Marc;
Demonstration of creep analysis in Marc
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MARC_03_20120619
- published: 20 Jul 2012
- views: 5526
MSC Marc
MSC Marc is a nonlinear finite elements analysis software used to simulate behavior of complex materials and interaction under large deformations and strains. It can also simulate multi-physics scenarios across structural, thermal, piezoelectric, electrostatic, magnetostatic, and electromagnetic behaviors. It uses automatic two-dimensional and three-dimensional remeshing to analyze structures undergoing large distortions, and crack propagation.
History
Marc was the first commercial nonlinear finite element software developed by Marc Analysis Research Corporation founded in 1971 by Dr. Pedro Marcel. It was acquired in 1999 by MSC Software Corporation. Mentat is the dedicated pre- and post-processor used to support Marc.
Introduction
Engineering structures and systems often use nonlinear materials and experience complex interactions between various parts. For example, the stress-strain curve of an elastomer is highly nonlinear. During installation, elastomeric components could fold onto themselves and could undergo buckling. Their properties change with temperature and time. These nonlinearities are often grouped into three major categories, namely geometric, material and boundary condition nonlinearities. Marc is used to perform Finite Element Analysis of structures accounting for all these nonlinearities, in one, two and three dimensions.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/MSC_Marc
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Marc
Marc or MARC may refer to:
People
Software
Acronyms
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Marc
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
MSC
MSC may refer to:
Computers
Corporations
Education
Military
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/MSC
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
55:32Introducing Marc 2016
Introducing Marc 2016Introducing Marc 2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use. Key highlights of this release include: 1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers 2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals. 3. Contact Performance - Improve productivity with performance and ease of set up enhancements 4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh -
37:40Marc - Simulating Manufacturing Processes with MSC Software Solutions
Marc - Simulating Manufacturing Processes with MSC Software SolutionsMarc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar! Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation. Join this webinar to learn about ... Common manufacturing processes; FEA solutions in manufacturing; How to get better simulation results; Who Should Watch? CAE Analysts Product Design Engineers Manufacturing engineers Engineering Managers WE_MARC_01_20130219 -
1:23Consecutive Processes with MSC Marc Mentat: Welding and Machining
Consecutive Processes with MSC Marc Mentat: Welding and MachiningConsecutive Processes with MSC Marc Mentat: Welding and Machining
Prof. Dr. Nihat AKKUŞ nihat.akkus@marmara.edu.tr http://www.nihatakkus.com Res. Asst. Isik CETİNTAV isikcetintav@gmail.com Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining -
8:56Marc 2012 Student Edition Tutorial - Analysis of a Beam
Marc 2012 Student Edition Tutorial - Analysis of a Beam -
37:46Marc - Characterization of Elastomers for FEA
Marc - Characterization of Elastomers for FEAMarc - Characterization of Elastomers for FEA
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis. Watch this webcast to... Learn about the common tests used for material characterization; Learn how to convert data to material coefficients required for FEA; Demonstration of curve fitting process Who Should Watch? CAE Analysts Product Design Engineers Engineering Managers For more information about Marc, please visit: http://www.mscsoftware.com/product/marc WE_MAR_02_20120417_GEN -
6:36Marc and Mentat Sample Nonlinear Finite Element Analysis
Marc and Mentat Sample Nonlinear Finite Element AnalysisMarc and Mentat Sample Nonlinear Finite Element Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees. -
8:27Magneto Static Analysis of a Coaxial Cable using MSC Marc
Magneto Static Analysis of a Coaxial Cable using MSC MarcMagneto Static Analysis of a Coaxial Cable using MSC Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors. -
32:41Marc - Creep Analysis in Marc
Marc - Creep Analysis in MarcMarc - Creep Analysis in Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis. Watch this webcast to... Learn about the creep models; Learn how to model creep in Marc; Demonstration of creep analysis in Marc Who Should Watch? CAE Analysts Product Design Engineers Engineering Managers For more information about Marc, please visit: http://www.mscsoftware.com/product/marc WE_MARC_03_20120619 -
22:03Seal Analysis with Marc
Seal Analysis with MarcSeal Analysis with Marc
-
47:23Marc 2015: Release Overview
Marc 2015: Release Overview
-
Introducing Marc 2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use. Key highlights of this release include: 1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers 2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals. 3. Contact Performance - Improve productivity with performance and ease of set up enhancements 4. Geometry Associativity and Meshing - Apply properties, contact definitions, and B...
published: 25 Aug 2016 -
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar! Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation. Join this webinar to learn about ... ...
published: 22 Feb 2013 -
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Prof. Dr. Nihat AKKUŞ nihat.akkus@marmara.edu.tr http://www.nihatakkus.com Res. Asst. Isik CETİNTAV isikcetintav@gmail.com Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
published: 16 May 2016 -
-
Marc - Characterization of Elastomers for FEA
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis. Watch this webcast to... Learn about the common tests used for material characterization; Learn how to convert data to material coefficients required for FEA; Demonstration of curve fitting process Who Should Watch? CAE Analysts Product Design Engineers Engineering Mana...
published: 16 Jul 2012 -
Marc and Mentat Sample Nonlinear Finite Element Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
published: 17 Jun 2009 -
Magneto Static Analysis of a Coaxial Cable using MSC Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
published: 21 Oct 2009 -
Marc - Creep Analysis in Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis. Watch this webcast to... Learn about the creep models; Learn how to model creep in Marc; Demonstration of creep analysis in Marc Who Should Watch? CAE Analysts Product Design Engineers Engineering Managers For mo...
published: 20 Jul 2012 -
Seal Analysis with Marc
published: 02 Sep 2014 -
Introducing Marc 2016
- Order: Reorder
- Duration: 55:32
- Updated: 25 Aug 2016
- views: 1738
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact ...
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use.
Key highlights of this release include:
1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers
2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals.
3. Contact Performance - Improve productivity with performance and ease of set up enhancements
4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh
https://wn.com/Introducing_Marc_2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use.
Key highlights of this release include:
1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers
2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals.
3. Contact Performance - Improve productivity with performance and ease of set up enhancements
4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh
- published: 25 Aug 2016
- views: 1738
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Order: Reorder
- Duration: 37:40
- Updated: 22 Feb 2013
- views: 5193
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final p...
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
https://wn.com/Marc_Simulating_Manufacturing_Processes_With_Msc_Software_Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
- published: 22 Feb 2013
- views: 5193
Consecutive Processes with MSC Marc Mentat: Welding and Machining
- Order: Reorder
- Duration: 1:23
- Updated: 16 May 2016
- views: 522
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses an...
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
https://wn.com/Consecutive_Processes_With_Msc_Marc_Mentat_Welding_And_Machining
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
- published: 16 May 2016
- views: 522
Marc 2012 Student Edition Tutorial - Analysis of a Beam
- Order: Reorder
- Duration: 8:56
- Updated: 23 Jul 2012
- views: 8663
Marc - Characterization of Elastomers for FEA
- Order: Reorder
- Duration: 37:46
- Updated: 16 Jul 2012
- views: 4605
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strai...
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis.
Watch this webcast to...
Learn about the common tests used for material characterization;
Learn how to convert data to material coefficients required for FEA;
Demonstration of curve fitting process
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MAR_02_20120417_GEN
https://wn.com/Marc_Characterization_Of_Elastomers_For_Fea
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis.
Watch this webcast to...
Learn about the common tests used for material characterization;
Learn how to convert data to material coefficients required for FEA;
Demonstration of curve fitting process
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MAR_02_20120417_GEN
- published: 16 Jul 2012
- views: 4605
Marc and Mentat Sample Nonlinear Finite Element Analysis
- Order: Reorder
- Duration: 6:36
- Updated: 17 Jun 2009
- views: 24807
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is ...
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
https://wn.com/Marc_And_Mentat_Sample_Nonlinear_Finite_Element_Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
- published: 17 Jun 2009
- views: 24807
Magneto Static Analysis of a Coaxial Cable using MSC Marc
- Order: Reorder
- Duration: 8:27
- Updated: 21 Oct 2009
- views: 2677
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic fi...
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
https://wn.com/Magneto_Static_Analysis_Of_A_Coaxial_Cable_Using_Msc_Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
- published: 21 Oct 2009
- views: 2677
Marc - Creep Analysis in Marc
- Order: Reorder
- Duration: 32:41
- Updated: 20 Jul 2012
- views: 5526
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real wor...
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis.
Watch this webcast to...
Learn about the creep models;
Learn how to model creep in Marc;
Demonstration of creep analysis in Marc
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MARC_03_20120619
https://wn.com/Marc_Creep_Analysis_In_Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis.
Watch this webcast to...
Learn about the creep models;
Learn how to model creep in Marc;
Demonstration of creep analysis in Marc
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MARC_03_20120619
- published: 20 Jul 2012
- views: 5526
Seal Analysis with Marc
- Order: Reorder
- Duration: 22:03
- Updated: 02 Sep 2014
- views: 1737
- published: 02 Sep 2014
- views: 1737
Marc 2015: Release Overview
- Order: Reorder
- Duration: 47:23
- Updated: 18 Nov 2015
- views: 1414
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accuracy, while opening up the ability to solve new classes of problems wit...
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accuracy, while opening up the ability to solve new classes of problems with the introduction of new material models for elastomers and anisotropic plasticity.
https://wn.com/Marc_2015_Release_Overview
-
Introducing Marc 2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use. Key highlights of this release include: 1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers 2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals. 3. Contact Performance - Improve productivity with performance and ease of set up enhancements 4. Geometry Associativity and Meshing - Apply properties, contact definitions, and B...
published: 25 Aug 2016 -
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar! Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation. Join this webinar to learn about ... ...
published: 22 Feb 2013 -
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Prof. Dr. Nihat AKKUŞ nihat.akkus@marmara.edu.tr http://www.nihatakkus.com Res. Asst. Isik CETİNTAV isikcetintav@gmail.com Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
published: 16 May 2016 -
-
Marc - Characterization of Elastomers for FEA
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis. Watch this webcast to... Learn about the common tests used for material characterization; Learn how to convert data to material coefficients required for FEA; Demonstration of curve fitting process Who Should Watch? CAE Analysts Product Design Engineers Engineering Mana...
published: 16 Jul 2012 -
Marc and Mentat Sample Nonlinear Finite Element Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
published: 17 Jun 2009 -
Magneto Static Analysis of a Coaxial Cable using MSC Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
published: 21 Oct 2009 -
Marc - Creep Analysis in Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis. Watch this webcast to... Learn about the creep models; Learn how to model creep in Marc; Demonstration of creep analysis in Marc Who Should Watch? CAE Analysts Product Design Engineers Engineering Managers For mo...
published: 20 Jul 2012 -
Seal Analysis with Marc
published: 02 Sep 2014 -
Introducing Marc 2016
- Order: Reorder
- Duration: 55:32
- Updated: 25 Aug 2016
- views: 1738
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact ...
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use.
Key highlights of this release include:
1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers
2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals.
3. Contact Performance - Improve productivity with performance and ease of set up enhancements
4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh
https://wn.com/Introducing_Marc_2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to deliver major enhancements in nonlinear material modeling, and contact analysis improvements, with focus on ease of use.
Key highlights of this release include:
1. Elastomer Material Data fitting - Compute material parameters that characterize time, temperature, and frequency dependent behavior of elastomers
2. New Material Models for Plasticity, Damage, and Phase Transformation - Use new models to study influence of phase transformations on strength, hardness, and residual stresses/strains. Analyze damage growth in metals.
3. Contact Performance - Improve productivity with performance and ease of set up enhancements
4. Geometry Associativity and Meshing - Apply properties, contact definitions, and BCs to CAD entities and automatically transfer to associated FE mesh
- published: 25 Aug 2016
- views: 1738
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Order: Reorder
- Duration: 37:40
- Updated: 22 Feb 2013
- views: 5193
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final p...
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
https://wn.com/Marc_Simulating_Manufacturing_Processes_With_Msc_Software_Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
- published: 22 Feb 2013
- views: 5193
Consecutive Processes with MSC Marc Mentat: Welding and Machining
- Order: Reorder
- Duration: 1:23
- Updated: 16 May 2016
- views: 522
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses an...
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
https://wn.com/Consecutive_Processes_With_Msc_Marc_Mentat_Welding_And_Machining
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Isik CETİNTAV
isikcetintav@gmail.com
Prediction of Residual Stresses and Distortions After Consecutive Processes: Welding and Machining
- published: 16 May 2016
- views: 522
Marc 2012 Student Edition Tutorial - Analysis of a Beam
- Order: Reorder
- Duration: 8:56
- Updated: 23 Jul 2012
- views: 8663
Marc - Characterization of Elastomers for FEA
- Order: Reorder
- Duration: 37:46
- Updated: 16 Jul 2012
- views: 4605
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strai...
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis.
Watch this webcast to...
Learn about the common tests used for material characterization;
Learn how to convert data to material coefficients required for FEA;
Demonstration of curve fitting process
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MAR_02_20120417_GEN
https://wn.com/Marc_Characterization_Of_Elastomers_For_Fea
One of the key criteria for successful analysis of elastomers is the characterization of their material properties. Since elastomers undergo large elastic strains and exhibit behavior that depends of the deformation modes, it is important to get a complete picture of the material response. Having good material data helps with both accuracy and convergence of the analysis. In this webinar, we will discuss some of the recommended tests and the steps to obtain the required material coefficients for finite element analysis.
Watch this webcast to...
Learn about the common tests used for material characterization;
Learn how to convert data to material coefficients required for FEA;
Demonstration of curve fitting process
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MAR_02_20120417_GEN
- published: 16 Jul 2012
- views: 4605
Marc and Mentat Sample Nonlinear Finite Element Analysis
- Order: Reorder
- Duration: 6:36
- Updated: 17 Jun 2009
- views: 24807
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is ...
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
https://wn.com/Marc_And_Mentat_Sample_Nonlinear_Finite_Element_Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Software's Marc and Mentat. In this break forming example, a flat plate is acted upon by a rigid die and a rigid table, bending it 90 degrees.
- published: 17 Jun 2009
- views: 24807
Magneto Static Analysis of a Coaxial Cable using MSC Marc
- Order: Reorder
- Duration: 8:27
- Updated: 21 Oct 2009
- views: 2677
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic fi...
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
https://wn.com/Magneto_Static_Analysis_Of_A_Coaxial_Cable_Using_Msc_Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial cable. The objective is to find the magnetic induction and magnetic field intensity in the cable due to current flow in conductors.
- published: 21 Oct 2009
- views: 2677
Marc - Creep Analysis in Marc
- Order: Reorder
- Duration: 32:41
- Updated: 20 Jul 2012
- views: 5526
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real wor...
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis.
Watch this webcast to...
Learn about the creep models;
Learn how to model creep in Marc;
Demonstration of creep analysis in Marc
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MARC_03_20120619
https://wn.com/Marc_Creep_Analysis_In_Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress level, either below or above the yield stress, although in many real world applications, it is often accompanied by plasticity. Creep is especially an important factor at elevated temperatures and needs to be analyzed with care to obtain better designs. Creep analysis has application in nuclear industry, manufacturing processes, sealing, turbines and jet engines to name a few. This webinar will provide an overview of creep models available in Marc and steps for a successful creep analysis.
Watch this webcast to...
Learn about the creep models;
Learn how to model creep in Marc;
Demonstration of creep analysis in Marc
Who Should Watch?
CAE Analysts
Product Design Engineers
Engineering Managers
For more information about Marc, please visit:
http://www.mscsoftware.com/product/marc
WE_MARC_03_20120619
- published: 20 Jul 2012
- views: 5526
Seal Analysis with Marc
- Order: Reorder
- Duration: 22:03
- Updated: 02 Sep 2014
- views: 1737
- published: 02 Sep 2014
- views: 1737
Marc 2015: Release Overview
- Order: Reorder
- Duration: 47:23
- Updated: 18 Nov 2015
- views: 1414
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accuracy, while opening up the ability to solve new classes of problems wit...
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accuracy, while opening up the ability to solve new classes of problems with the introduction of new material models for elastomers and anisotropic plasticity.
https://wn.com/Marc_2015_Release_Overview
-
An Awesome 2015 Big E Train Show Weekend (1/24 to 25/2015)
Towards the end of January was time for the large train show at the Eastern States Exposition in West Springfield, MA, commonly known as the Big E. The normal routine for Saturday of that weekend was to hang out at the double crossings in West Springfield, MA for some morning train action on the CSX B&A; Line before going to the show and head over to Palmer, MA for dinner after. I picked up Mike (6000csx) & Josh (CSXYN4) in the morning and we made our way to the double crossings and met up with Mitch (MSC Railvideos), Marc H & Ralph B. Despite a three-hour lull in between the trains, we got some nice action. First up was hotshots Q019 (west) and Q012 (east) meet, then mixed freights (both west) Q425 and Q427 raced each other. It was snowing so it made the shots better (roads weren't too ...
published: 01 Feb 2015 -
Co-simulation Analysis and Higher Performance with Marc 2014.2
MSC Software is pleased to introduce you to Marc 2014.2 with the capability to perform co-simulation utilizing Adams 2015 for multi-body dynamics and Marc for nonlinear finite element simulation. The co-simulation technology provides a mechanism to solve problems dominated by rigid body motion such as automotive ride and handling, but require a higher fidelity nonlinear analysis to accurately capture nonlinear behavior in parts such as suspension systems. Other improvements include solver enhancements achieved with parallelization of CASI solver and changes to CAD import methodology, which will also be discussed in the presentation.
published: 15 Jul 2015 -
Accelerate Simulations with MSC & NVIDIA Solutions
For decades, MSC Nastran and Marc have been helping product manufacturers across various industries to understand product behavior early in the product development cycle and to validate & optimize product designs through structural simulation. These simulations are typically large requiring high-performance systems (HPC) accessible to globally distributed design and engineering teams posing a challenge to CAE data accessibility & management, intellectual property protection, collaboration, and hardware/software utilization. MSC and NVIDIA have been working together to speed-up CAE simulations by 2-3x on average. MSC Software users can rely on scalable and flexible NVIDIA technology to address these challenges with uncompromising graphics & computational performance.
published: 23 Apr 2015 -
Lab. Membrane. Lecture 4.
A two-dimensional study of stress around a hole in a membrane. Comparison of results from different commercial codes: MSC/NASTRAN (TM), ASTROS (TM), MARC (TM)
published: 29 Aug 2013 -
SimManager 2014 Release Overview
SimManager 2014 brings product enhancements and innovative functionality to MSC Software's Simulation Process and Data Management solution. The new release focuses on user interface improvements making SimManager easier to use and provides direct integration with commonly used computer-aided engineering (CAE) applications such as MSC Software's Adams, Patran, and Marc, as well as ANSA from Beta CAE Systems. This webinar will review the key features of this release and how customers can benefit from SimManager implementation. A demo of the new capabilities will also be provided to help you understand the usage of these capabilities.
published: 20 Oct 2014 -
-
-
Pocosa 19 mai 2016 - Culture de la procédure et Stupidité fonctionnelle
Discussion publique organisée le 19 mai 2016 par La Chaire de recherche Politiques, connaissances et santé. Réfléchir à l'état du réseau de santé et des services sociaux au Québec et aux moyens possibles de contribuer à son amélioration. Invités : - Carole Trempe, Présidente directrice générale de l’Association des cadres supérieurs de la santé et des services sociaux. - Paul Lamarche, Professeur honoraire en administration de la santé à l’Université de Montréal, Paul Lamarche a été fonctionnaire au MSSS tant sous des gouvernements péquistes que libéraux, de 1977 à 1982 puis de 1986 à 1992. Entre autres mandats, il a été sous-ministre responsable de la réforme sous les ministres libéraux Thérèse Lavoie-Roux puis Marc-Yvan Côté. - Natalie Stake-Doucet, Inf., MSc (A), Candidate au doctora...
published: 31 May 2016 -
Raimondo Vianello & Sandra Mondaini - TV - Crociera Vianello (M.Simonetti, 2008)
Crociera Vianello è una sorta di sequel della sit-com Casa Vianello, con la quale ha in comune la coppia di protagonisti - Sandra Mondaini e Raimondo Vianello alla loro ultima interpretazione. Le riprese sono state effettuate a bordo della nave da crociera MSC Orchestra a Genova e a Torino. Regia Maurizio Simonetti Sceneggiatura Giambattista Avellino, Alberto Consarino Interpreti e personaggi Sandra Mondaini: sè stessa Raimondo Vianello: sè stesso Tosca D'Aquino: Angela Marc Tainon: Pietro Massimo Wertmüller: comandante Giansanti Sabina Began: Nicoletta Michela Andreozzi: Giulia Fabio Fulco: dottor Cressi Paolo Triestino: vice comandante Roberto Ciufoli: Juan Emanuele Vezzoli: avvocato Jouvet Claudio Batta: Carmelo Cristina Serafini: ...
published: 18 Sep 2016 -
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar! Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation. Join this webinar to learn about ... ...
published: 22 Feb 2013
An Awesome 2015 Big E Train Show Weekend (1/24 to 25/2015)
- Order: Reorder
- Duration: 31:12
- Updated: 01 Feb 2015
- views: 13654
Towards the end of January was time for the large train show at the Eastern States Exposition in West Springfield, MA, commonly known as the Big E.
The normal...
Towards the end of January was time for the large train show at the Eastern States Exposition in West Springfield, MA, commonly known as the Big E.
The normal routine for Saturday of that weekend was to hang out at the double crossings in West Springfield, MA for some morning train action on the CSX B&A; Line before going to the show and head over to Palmer, MA for dinner after.
I picked up Mike (6000csx) & Josh (CSXYN4) in the morning and we made our way to the double crossings and met up with Mitch (MSC Railvideos), Marc H & Ralph B. Despite a three-hour lull in between the trains, we got some nice action. First up was hotshots Q019 (west) and Q012 (east) meet, then mixed freights (both west) Q425 and Q427 raced each other. It was snowing so it made the shots better (roads weren't too bad, by the way).
Then it was off to the show. As usual, we met so many familiar faces there. (Note: In 2013 I did a much more detailed video on the layouts at the show and the link to the video is below: http://youtu.be/ur1wIMmLCNs)
After the show, it was off to Palmer, MA for dinner at the Steaming Tender Restaurant. Only one train passed through at the time before we headed home and that was the eastbound Lakeshore Limited (P448).
On Sunday of that weekend, I went back to Palmer and hung out with some of the guys there along with seeing a few eastbound CSX trains (Q012 & Q022 with AC60CW leaders and Q264 with the regular GEVO's. In addition, Q022 also brought along a CSX SD70ACe, which is rare since there are only 20 of them in CSX's fleet). I joined a couple of the guys at South Deerfield, MA along the Conn River Line for the southbound Amtrak Vermonter flying by along its new route. We also went to Belchertown, MA hoping to see a New England Central freight train but it never showed up.
Anyway, all in all it was an awesome Big E weekend!
https://wn.com/An_Awesome_2015_Big_E_Train_Show_Weekend_(1_24_To_25_2015)
Towards the end of January was time for the large train show at the Eastern States Exposition in West Springfield, MA, commonly known as the Big E.
The normal routine for Saturday of that weekend was to hang out at the double crossings in West Springfield, MA for some morning train action on the CSX B&A; Line before going to the show and head over to Palmer, MA for dinner after.
I picked up Mike (6000csx) & Josh (CSXYN4) in the morning and we made our way to the double crossings and met up with Mitch (MSC Railvideos), Marc H & Ralph B. Despite a three-hour lull in between the trains, we got some nice action. First up was hotshots Q019 (west) and Q012 (east) meet, then mixed freights (both west) Q425 and Q427 raced each other. It was snowing so it made the shots better (roads weren't too bad, by the way).
Then it was off to the show. As usual, we met so many familiar faces there. (Note: In 2013 I did a much more detailed video on the layouts at the show and the link to the video is below: http://youtu.be/ur1wIMmLCNs)
After the show, it was off to Palmer, MA for dinner at the Steaming Tender Restaurant. Only one train passed through at the time before we headed home and that was the eastbound Lakeshore Limited (P448).
On Sunday of that weekend, I went back to Palmer and hung out with some of the guys there along with seeing a few eastbound CSX trains (Q012 & Q022 with AC60CW leaders and Q264 with the regular GEVO's. In addition, Q022 also brought along a CSX SD70ACe, which is rare since there are only 20 of them in CSX's fleet). I joined a couple of the guys at South Deerfield, MA along the Conn River Line for the southbound Amtrak Vermonter flying by along its new route. We also went to Belchertown, MA hoping to see a New England Central freight train but it never showed up.
Anyway, all in all it was an awesome Big E weekend!
- published: 01 Feb 2015
- views: 13654
Co-simulation Analysis and Higher Performance with Marc 2014.2
- Order: Reorder
- Duration: 36:39
- Updated: 15 Jul 2015
- views: 563
MSC Software is pleased to introduce you to Marc 2014.2 with the capability to perform co-simulation utilizing Adams 2015 for multi-body dynamics and Marc for n...
MSC Software is pleased to introduce you to Marc 2014.2 with the capability to perform co-simulation utilizing Adams 2015 for multi-body dynamics and Marc for nonlinear finite element simulation. The co-simulation technology provides a mechanism to solve problems dominated by rigid body motion such as automotive ride and handling, but require a higher fidelity nonlinear analysis to accurately capture nonlinear behavior in parts such as suspension systems.
Other improvements include solver enhancements achieved with parallelization of CASI solver and changes to CAD import methodology, which will also be discussed in the presentation.
https://wn.com/Co_Simulation_Analysis_And_Higher_Performance_With_Marc_2014.2
MSC Software is pleased to introduce you to Marc 2014.2 with the capability to perform co-simulation utilizing Adams 2015 for multi-body dynamics and Marc for nonlinear finite element simulation. The co-simulation technology provides a mechanism to solve problems dominated by rigid body motion such as automotive ride and handling, but require a higher fidelity nonlinear analysis to accurately capture nonlinear behavior in parts such as suspension systems.
Other improvements include solver enhancements achieved with parallelization of CASI solver and changes to CAD import methodology, which will also be discussed in the presentation.
- published: 15 Jul 2015
- views: 563
Accelerate Simulations with MSC & NVIDIA Solutions
- Order: Reorder
- Duration: 39:30
- Updated: 23 Apr 2015
- views: 398
For decades, MSC Nastran and Marc have been helping product manufacturers across various industries to understand product behavior early in the product developm...
For decades, MSC Nastran and Marc have been helping product manufacturers across various industries to understand product behavior early in the product development cycle and to validate & optimize product designs through structural simulation. These simulations are typically large requiring high-performance systems (HPC) accessible to globally distributed design and engineering teams posing a challenge to CAE data accessibility & management, intellectual property protection, collaboration, and hardware/software utilization.
MSC and NVIDIA have been working together to speed-up CAE simulations by 2-3x on average. MSC Software users can rely on scalable and flexible NVIDIA technology to address these challenges with uncompromising graphics & computational performance.
https://wn.com/Accelerate_Simulations_With_Msc_Nvidia_Solutions
For decades, MSC Nastran and Marc have been helping product manufacturers across various industries to understand product behavior early in the product development cycle and to validate & optimize product designs through structural simulation. These simulations are typically large requiring high-performance systems (HPC) accessible to globally distributed design and engineering teams posing a challenge to CAE data accessibility & management, intellectual property protection, collaboration, and hardware/software utilization.
MSC and NVIDIA have been working together to speed-up CAE simulations by 2-3x on average. MSC Software users can rely on scalable and flexible NVIDIA technology to address these challenges with uncompromising graphics & computational performance.
- published: 23 Apr 2015
- views: 398
Lab. Membrane. Lecture 4.
- Order: Reorder
- Duration: 56:40
- Updated: 29 Aug 2013
- views: 755
A two-dimensional study of stress around a hole in a membrane. Comparison of results from different commercial codes: MSC/NASTRAN (TM), ASTROS (TM), MARC (TM)...
A two-dimensional study of stress around a hole in a membrane. Comparison of results from different commercial codes: MSC/NASTRAN (TM), ASTROS (TM), MARC (TM)
https://wn.com/Lab._Membrane._Lecture_4.
A two-dimensional study of stress around a hole in a membrane. Comparison of results from different commercial codes: MSC/NASTRAN (TM), ASTROS (TM), MARC (TM)
- published: 29 Aug 2013
- views: 755
SimManager 2014 Release Overview
- Order: Reorder
- Duration: 30:19
- Updated: 20 Oct 2014
- views: 511
SimManager 2014 brings product enhancements and innovative functionality to MSC Software's Simulation Process and Data Management solution. The new release focu...
SimManager 2014 brings product enhancements and innovative functionality to MSC Software's Simulation Process and Data Management solution. The new release focuses on user interface improvements making SimManager easier to use and provides direct integration with commonly used computer-aided engineering (CAE) applications such as MSC Software's Adams, Patran, and Marc, as well as ANSA from Beta CAE Systems. This webinar will review the key features of this release and how customers can benefit from SimManager implementation. A demo of the new capabilities will also be provided to help you understand the usage of these capabilities.
https://wn.com/Simmanager_2014_Release_Overview
SimManager 2014 brings product enhancements and innovative functionality to MSC Software's Simulation Process and Data Management solution. The new release focuses on user interface improvements making SimManager easier to use and provides direct integration with commonly used computer-aided engineering (CAE) applications such as MSC Software's Adams, Patran, and Marc, as well as ANSA from Beta CAE Systems. This webinar will review the key features of this release and how customers can benefit from SimManager implementation. A demo of the new capabilities will also be provided to help you understand the usage of these capabilities.
- published: 20 Oct 2014
- views: 511
Lab Problem 3: Plate. Lecture 17.
- Order: Reorder
- Duration: 35:38
- Updated: 29 Aug 2013
- views: 311
A lab session considering a cantilevered plate with midspan support. A pair of loads on the tips cause twist. MSC/NASTRAN (TM), ASTROS (TM) and MARC (TM) are u...
A lab session considering a cantilevered plate with midspan support. A pair of loads on the tips cause twist. MSC/NASTRAN (TM), ASTROS (TM) and MARC (TM) are used
https://wn.com/Lab_Problem_3_Plate._Lecture_17.
FEA. Lab 4. Gear Tooth. Lecture 23, Part A.
- Order: Reorder
- Duration: 37:15
- Updated: 13 May 2012
- views: 290
Simple model of a gear tooth, using two elements. Concept of "chasing a singularity" in terms of a concentrated load. This is to be avoided, of course.
Three ...
Simple model of a gear tooth, using two elements. Concept of "chasing a singularity" in terms of a concentrated load. This is to be avoided, of course.
Three commercial comuter codes were used, MSC/NASTRAN, MARC, and ASTROS.
https://wn.com/Fea._Lab_4._Gear_Tooth._Lecture_23,_Part_A.
Pocosa 19 mai 2016 - Culture de la procédure et Stupidité fonctionnelle
- Order: Reorder
- Duration: 1:56:17
- Updated: 31 May 2016
- views: 191
Discussion publique organisée le 19 mai 2016 par La Chaire de recherche Politiques, connaissances et santé.
Réfléchir à l'état du réseau de santé et des servic...
Discussion publique organisée le 19 mai 2016 par La Chaire de recherche Politiques, connaissances et santé.
Réfléchir à l'état du réseau de santé et des services sociaux au Québec et aux moyens possibles de contribuer à son amélioration.
Invités :
- Carole Trempe, Présidente directrice générale de l’Association des cadres supérieurs de la santé et des services sociaux.
- Paul Lamarche, Professeur honoraire en administration de la santé à l’Université de Montréal, Paul Lamarche a été fonctionnaire au MSSS tant sous des gouvernements péquistes que libéraux, de 1977 à 1982 puis de 1986 à 1992. Entre autres mandats, il a été sous-ministre responsable de la réforme sous les ministres libéraux Thérèse Lavoie-Roux puis Marc-Yvan Côté.
- Natalie Stake-Doucet, Inf., MSc (A), Candidate au doctorat, Faculté des sciences infirmières, Université de Montréal. Elle est la cofondatrice du groupe Infirmières de McGill pour une Politique en Santé (McGill Nurses for Healthy Policy).
- Isabelle Têtu, Inf., cofondatrice de la Coopérative de solidarité SABSA.
Modérateur
Damien Contandriopoulos, professeur, Faculté des sciences infirmières, Université de Montréal ; chercheur, IRSPUM ; titulaire de la Chaire Pocosa.
https://wn.com/Pocosa_19_Mai_2016_Culture_De_La_Procédure_Et_Stupidité_Fonctionnelle
Discussion publique organisée le 19 mai 2016 par La Chaire de recherche Politiques, connaissances et santé.
Réfléchir à l'état du réseau de santé et des services sociaux au Québec et aux moyens possibles de contribuer à son amélioration.
Invités :
- Carole Trempe, Présidente directrice générale de l’Association des cadres supérieurs de la santé et des services sociaux.
- Paul Lamarche, Professeur honoraire en administration de la santé à l’Université de Montréal, Paul Lamarche a été fonctionnaire au MSSS tant sous des gouvernements péquistes que libéraux, de 1977 à 1982 puis de 1986 à 1992. Entre autres mandats, il a été sous-ministre responsable de la réforme sous les ministres libéraux Thérèse Lavoie-Roux puis Marc-Yvan Côté.
- Natalie Stake-Doucet, Inf., MSc (A), Candidate au doctorat, Faculté des sciences infirmières, Université de Montréal. Elle est la cofondatrice du groupe Infirmières de McGill pour une Politique en Santé (McGill Nurses for Healthy Policy).
- Isabelle Têtu, Inf., cofondatrice de la Coopérative de solidarité SABSA.
Modérateur
Damien Contandriopoulos, professeur, Faculté des sciences infirmières, Université de Montréal ; chercheur, IRSPUM ; titulaire de la Chaire Pocosa.
- published: 31 May 2016
- views: 191
Raimondo Vianello & Sandra Mondaini - TV - Crociera Vianello (M.Simonetti, 2008)
- Order: Reorder
- Duration: 1:29:50
- Updated: 18 Sep 2016
- views: 54
Crociera Vianello è una sorta di sequel della sit-com Casa Vianello, con la quale ha in comune la coppia di protagonisti - Sandra Mondaini e Raimondo Vianello a...
Crociera Vianello è una sorta di sequel della sit-com Casa Vianello, con la quale ha in comune la coppia di protagonisti - Sandra Mondaini e Raimondo Vianello alla loro ultima interpretazione.
Le riprese sono state effettuate a bordo della nave da crociera MSC Orchestra a Genova e a Torino.
Regia Maurizio Simonetti
Sceneggiatura Giambattista Avellino, Alberto Consarino
Interpreti e personaggi
Sandra Mondaini: sè stessa
Raimondo Vianello: sè stesso
Tosca D'Aquino: Angela
Marc Tainon: Pietro
Massimo Wertmüller: comandante Giansanti
Sabina Began: Nicoletta
Michela Andreozzi: Giulia
Fabio Fulco: dottor Cressi
Paolo Triestino: vice comandante
Roberto Ciufoli: Juan
Emanuele Vezzoli: avvocato Jouvet
Claudio Batta: Carmelo
Cristina Serafini: Infermiera
Iuliana Ierugan
Guido Ruffa: il fotografo della nave
Musiche Claudio Mattone
Casa di produzione Grundy Italia, RTI
Prima visione
Prima TV Italia
Data 13 dicembre 2008
Rete televisiva Canale 5
Opere audiovisive correlate
Precedenti Casa Vianello
https://wn.com/Raimondo_Vianello_Sandra_Mondaini_Tv_Crociera_Vianello_(M.Simonetti,_2008)
Crociera Vianello è una sorta di sequel della sit-com Casa Vianello, con la quale ha in comune la coppia di protagonisti - Sandra Mondaini e Raimondo Vianello alla loro ultima interpretazione.
Le riprese sono state effettuate a bordo della nave da crociera MSC Orchestra a Genova e a Torino.
Regia Maurizio Simonetti
Sceneggiatura Giambattista Avellino, Alberto Consarino
Interpreti e personaggi
Sandra Mondaini: sè stessa
Raimondo Vianello: sè stesso
Tosca D'Aquino: Angela
Marc Tainon: Pietro
Massimo Wertmüller: comandante Giansanti
Sabina Began: Nicoletta
Michela Andreozzi: Giulia
Fabio Fulco: dottor Cressi
Paolo Triestino: vice comandante
Roberto Ciufoli: Juan
Emanuele Vezzoli: avvocato Jouvet
Claudio Batta: Carmelo
Cristina Serafini: Infermiera
Iuliana Ierugan
Guido Ruffa: il fotografo della nave
Musiche Claudio Mattone
Casa di produzione Grundy Italia, RTI
Prima visione
Prima TV Italia
Data 13 dicembre 2008
Rete televisiva Canale 5
Opere audiovisive correlate
Precedenti Casa Vianello
- published: 18 Sep 2016
- views: 54
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Order: Reorder
- Duration: 37:40
- Updated: 22 Feb 2013
- views: 5193
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final p...
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
https://wn.com/Marc_Simulating_Manufacturing_Processes_With_Msc_Software_Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes to meet required design criteria and assemble components into final product. Because of multiple variables that could affect the process, identifying optimal parameters by empirical methods or experience can introduce severe uncertainty in the performance of the end designs. Simulation helps address these issues early in the design cycle to more effectively identify problems and reduce failures. Marc, with its strengths in nonlinear and failure analysis, is a strong solution to simulate various manufacturing processes. An overview of Marc's capabilities that help with overcoming the challenges of these highly nonlinear processes is provided in this presentation.
Join this webinar to learn about ...
Common manufacturing processes;
FEA solutions in manufacturing;
How to get better simulation results;
Who Should Watch?
CAE Analysts
Product Design Engineers
Manufacturing engineers
Engineering Managers
WE_MARC_01_20130219
- published: 22 Feb 2013
- views: 5193
fullscreen slideshow
- Playlist
- Chat
fullscreen slideshow
- Playlist
- Chat
55:32
Introducing Marc 2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to d...
published: 25 Aug 2016
Introducing Marc 2016
Introducing Marc 2016
- Report rights infringement
- published: 25 Aug 2016
- views: 1738
37:40
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes...
published: 22 Feb 2013
Marc - Simulating Manufacturing Processes with MSC Software Solutions
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Report rights infringement
- published: 22 Feb 2013
- views: 5193
1:23
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Is...
published: 16 May 2016
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Consecutive Processes with MSC Marc Mentat: Welding and Machining
- Report rights infringement
- published: 16 May 2016
- views: 522
8:56
Marc 2012 Student Edition Tutorial - Analysis of a Beam
http://www.mscsoftware.com/Submitted-Content/Resources/8_2.pdf
published: 23 Jul 2012
Marc 2012 Student Edition Tutorial - Analysis of a Beam
Marc 2012 Student Edition Tutorial - Analysis of a Beam
- Report rights infringement
- published: 23 Jul 2012
- views: 8663
37:46
Marc - Characterization of Elastomers for FEA
One of the key criteria for successful analysis of elastomers is the characterization of t...
published: 16 Jul 2012
Marc - Characterization of Elastomers for FEA
Marc - Characterization of Elastomers for FEA
- Report rights infringement
- published: 16 Jul 2012
- views: 4605
6:36
Marc and Mentat Sample Nonlinear Finite Element Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Softwa...
published: 17 Jun 2009
Marc and Mentat Sample Nonlinear Finite Element Analysis
Marc and Mentat Sample Nonlinear Finite Element Analysis
- Report rights infringement
- published: 17 Jun 2009
- views: 24807
8:27
Magneto Static Analysis of a Coaxial Cable using MSC Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial ...
published: 21 Oct 2009
Magneto Static Analysis of a Coaxial Cable using MSC Marc
Magneto Static Analysis of a Coaxial Cable using MSC Marc
- Report rights infringement
- published: 21 Oct 2009
- views: 2677
32:41
Marc - Creep Analysis in Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress le...
published: 20 Jul 2012
Marc - Creep Analysis in Marc
Marc - Creep Analysis in Marc
- Report rights infringement
- published: 20 Jul 2012
- views: 5526
22:03
Seal Analysis with Marc
published: 02 Sep 2014
Seal Analysis with Marc
Seal Analysis with Marc
- Report rights infringement
- published: 02 Sep 2014
- views: 1737
47:23
Marc 2015: Release Overview
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accur...
published: 18 Nov 2015
Marc 2015: Release Overview
Marc 2015: Release Overview
- Report rights infringement
- published: 18 Nov 2015
- views: 1414
fullscreen slideshow
- Playlist
- Chat
55:32
Introducing Marc 2016
We are pleased to announce the release of Marc 2016! With this release Marc continues to d...
published: 25 Aug 2016
Introducing Marc 2016
Introducing Marc 2016
- Report rights infringement
- published: 25 Aug 2016
- views: 1738
37:40
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes...
published: 22 Feb 2013
Marc - Simulating Manufacturing Processes with MSC Software Solutions
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Report rights infringement
- published: 22 Feb 2013
- views: 5193
1:23
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Prof. Dr. Nihat AKKUŞ
nihat.akkus@marmara.edu.tr
http://www.nihatakkus.com
Res. Asst. Is...
published: 16 May 2016
Consecutive Processes with MSC Marc Mentat: Welding and Machining
Consecutive Processes with MSC Marc Mentat: Welding and Machining
- Report rights infringement
- published: 16 May 2016
- views: 522
8:56
Marc 2012 Student Edition Tutorial - Analysis of a Beam
http://www.mscsoftware.com/Submitted-Content/Resources/8_2.pdf
published: 23 Jul 2012
Marc 2012 Student Edition Tutorial - Analysis of a Beam
Marc 2012 Student Edition Tutorial - Analysis of a Beam
- Report rights infringement
- published: 23 Jul 2012
- views: 8663
37:46
Marc - Characterization of Elastomers for FEA
One of the key criteria for successful analysis of elastomers is the characterization of t...
published: 16 Jul 2012
Marc - Characterization of Elastomers for FEA
Marc - Characterization of Elastomers for FEA
- Report rights infringement
- published: 16 Jul 2012
- views: 4605
6:36
Marc and Mentat Sample Nonlinear Finite Element Analysis
This video shows how to perform a nonlinear finite element analysis (FEA) using MSC Softwa...
published: 17 Jun 2009
Marc and Mentat Sample Nonlinear Finite Element Analysis
Marc and Mentat Sample Nonlinear Finite Element Analysis
- Report rights infringement
- published: 17 Jun 2009
- views: 24807
8:27
Magneto Static Analysis of a Coaxial Cable using MSC Marc
This case study builds, analyzes, and post-processes a planar representation of a coaxial ...
published: 21 Oct 2009
Magneto Static Analysis of a Coaxial Cable using MSC Marc
Magneto Static Analysis of a Coaxial Cable using MSC Marc
- Report rights infringement
- published: 21 Oct 2009
- views: 2677
32:41
Marc - Creep Analysis in Marc
Creep is a time-dependent inelastic behavior that can occur in a material at any stress le...
published: 20 Jul 2012
Marc - Creep Analysis in Marc
Marc - Creep Analysis in Marc
- Report rights infringement
- published: 20 Jul 2012
- views: 5526
22:03
Seal Analysis with Marc
published: 02 Sep 2014
Seal Analysis with Marc
Seal Analysis with Marc
- Report rights infringement
- published: 02 Sep 2014
- views: 1737
47:23
Marc 2015: Release Overview
Marc 2015 delivers new triangle and tetrahedral elements for higher productivity and accur...
published: 18 Nov 2015
Marc 2015: Release Overview
Marc 2015: Release Overview
- Report rights infringement
- published: 18 Nov 2015
- views: 1414
fullscreen slideshow
- Playlist
- Chat
31:12
An Awesome 2015 Big E Train Show Weekend (1/24 to 25/2015)
Towards the end of January was time for the large train show at the Eastern States Exposit...
published: 01 Feb 2015
An Awesome 2015 Big E Train Show Weekend (1/24 to 25/2015)
An Awesome 2015 Big E Train Show Weekend (1/24 to 25/2015)
- Report rights infringement
- published: 01 Feb 2015
- views: 13654
36:39
Co-simulation Analysis and Higher Performance with Marc 2014.2
MSC Software is pleased to introduce you to Marc 2014.2 with the capability to perform co-...
published: 15 Jul 2015
Co-simulation Analysis and Higher Performance with Marc 2014.2
Co-simulation Analysis and Higher Performance with Marc 2014.2
- Report rights infringement
- published: 15 Jul 2015
- views: 563
39:30
Accelerate Simulations with MSC & NVIDIA Solutions
For decades, MSC Nastran and Marc have been helping product manufacturers across various i...
published: 23 Apr 2015
Accelerate Simulations with MSC & NVIDIA Solutions
Accelerate Simulations with MSC & NVIDIA Solutions
- Report rights infringement
- published: 23 Apr 2015
- views: 398
56:40
Lab. Membrane. Lecture 4.
A two-dimensional study of stress around a hole in a membrane. Comparison of results from...
published: 29 Aug 2013
Lab. Membrane. Lecture 4.
Lab. Membrane. Lecture 4.
- Report rights infringement
- published: 29 Aug 2013
- views: 755
30:19
SimManager 2014 Release Overview
SimManager 2014 brings product enhancements and innovative functionality to MSC Software's...
published: 20 Oct 2014
SimManager 2014 Release Overview
SimManager 2014 Release Overview
- Report rights infringement
- published: 20 Oct 2014
- views: 511
35:38
Lab Problem 3: Plate. Lecture 17.
A lab session considering a cantilevered plate with midspan support. A pair of loads on t...
published: 29 Aug 2013
Lab Problem 3: Plate. Lecture 17.
Lab Problem 3: Plate. Lecture 17.
- Report rights infringement
- published: 29 Aug 2013
- views: 311
37:15
FEA. Lab 4. Gear Tooth. Lecture 23, Part A.
Simple model of a gear tooth, using two elements. Concept of "chasing a singularity" in t...
published: 13 May 2012
FEA. Lab 4. Gear Tooth. Lecture 23, Part A.
FEA. Lab 4. Gear Tooth. Lecture 23, Part A.
- Report rights infringement
- published: 13 May 2012
- views: 290
1:56:17
Pocosa 19 mai 2016 - Culture de la procédure et Stupidité fonctionnelle
Discussion publique organisée le 19 mai 2016 par La Chaire de recherche Politiques, connai...
published: 31 May 2016
Pocosa 19 mai 2016 - Culture de la procédure et Stupidité fonctionnelle
Pocosa 19 mai 2016 - Culture de la procédure et Stupidité fonctionnelle
- Report rights infringement
- published: 31 May 2016
- views: 191
1:29:50
Raimondo Vianello & Sandra Mondaini - TV - Crociera Vianello (M.Simonetti, 2008)
Crociera Vianello è una sorta di sequel della sit-com Casa Vianello, con la quale ha in co...
published: 18 Sep 2016
Raimondo Vianello & Sandra Mondaini - TV - Crociera Vianello (M.Simonetti, 2008)
Raimondo Vianello & Sandra Mondaini - TV - Crociera Vianello (M.Simonetti, 2008)
- Report rights infringement
- published: 18 Sep 2016
- views: 54
37:40
Marc - Simulating Manufacturing Processes with MSC Software Solutions
About this Webinar!
Manufacturing processes are used to form materials into desired shapes...
published: 22 Feb 2013
Marc - Simulating Manufacturing Processes with MSC Software Solutions
Marc - Simulating Manufacturing Processes with MSC Software Solutions
- Report rights infringement
- published: 22 Feb 2013
- views: 5193
An Awesome 2015 Big E Train Show Weekend (1/24 to ...
Co-simulation Analysis and Higher Performance with...
Accelerate Simulations with MSC & NVIDIA Solutions...
Lab. Membrane. Lecture 4....
SimManager 2014 Release Overview...
Lab Problem 3: Plate. Lecture 17....
FEA. Lab 4. Gear Tooth. Lecture 23, Part A....
Pocosa 19 mai 2016 - Culture de la procédure et St...
Raimondo Vianello & Sandra Mondaini - TV - Crocier...
Marc - Simulating Manufacturing Processes with MSC...
See more photos of msc marc
back
London terrorist attacks: 12 arrested as UK prime minister warns about Islamic extremism
Edit The Times Picayune 04 Jun 2017
LONDON -- Prime Minister Theresa May Sunday called for tougher measures to fight Islamic extremism after attackers using a vehicle and knives killed seven people in a busy area of London and disrupted Britain's election campaign just days before a nationwide vote. The assault unfolded -- and ended -- quickly, with police fatally shooting the three attackers within eight minutes ... Some suffered life-threatening injuries ... ....
back
The disrespect shown to Obama still rankles
Edit CNN 04 Jun 2017
(CNN)On the day Donald Trump became president, black Americans exhaled as Michelle and Barack Obama got on that Marine One helicopter and flew away from the White House unharmed. In 2008, black Americans quietly worried Obama would be assassinated if he won the presidency, or killed before he could take the oath of office ... Issac Bailey ... Every report of a rogue police force cracking jokes about him raised concerns ... JUST WATCHED ... Replay ... ....
back
James Comey Senate testimony: America braces for a historic political moment
Edit The Guardian 04 Jun 2017
What the former FBI director tells a committee on Thursday could decide whether Trump survives his first term. The stakes have never been higher. James Comey. James Comey Senate testimony. America braces for a historic political moment. What the former FBI director tells a committee on Thursday could decide whether Trump survives his first term. The stakes have never been higher ... Read more ... Facebook. Twitter. Pinterest ... Twitter ... Robert Mueller ... ....
back
Saturday night turns to deadly horror as terrorists strike on London Bridge
Edit The Independent 04 Jun 2017
Britain has been sent reeling after its capital city was attacked by armed men who launched a shocking, deadly attack that left the country stunned less than a week before the General Election. Prime Minister Theresa May is to chair an an emergency security meeting after Metropolitan Police confirmed they were treating attacks at London Bridge and Borough Market - locations less than half-a-mile apart - as terror incidents ... ....
WATCH: Borough Market diner recounts his experience during the London attack
Edit ABC News 05 Jun 2017Robb: Potential No. 1 Pick Markelle Fultz Will Reportedly Workout For Celtics On Tuesday
Edit CBS Sports 05 Jun 2017
BOSTON (CBS) — The Boston Celtics will reportedly get a close look at potential No. 1 overall pick Markelle Fultz this week on their home turf ... Markelle Fultz #20 of the Washington Huskies during the college basketball game against the Arizona Wildcats at McKale Center on January 29, 2017 in Tucson, Arizona ... Marc Berman of the New York Post also reported Sunday that the Celtics plan to bring in NC State guard Dennis Smith Jr ... ....
Marc Bushelle is teaching his daughter to be fearless… one inspirational photo at a time
Edit The Grio 04 Jun 2017
Photographer Marc Bushelle and his wife, Janine Harper, were looking for a way to teach their young daughter Lily about importance of black women in history, so they decided to bring history to life ... But the effects of Marc’s lessons to his now 7-year-old daughter continue way beyond those portraits ... Marc Bushelle Photography/National Air and Space Museum/Public Domain ... Marc Bushelle Photography/NASA/Public Domain....
Reputable Family Medicine Physician, Emergency Medicine Physician and Hospitalist, Nabil Al-Kayssi, MBCHB, MSc, CCFP, will ...
Edit MENA FN 04 Jun 2017
(MENAFN Editorial) The International Association of HealthCare Professionals is pleased to welcome Dr. Nabil Al-Kayssi, MD, to their prestigious organization with his upcoming publ... ....
Injuries to Miguel Ibarra, Marc Burch strike Loons against Kansas City
Edit Star Tribune 04 Jun 2017Dovizioso seals rare Italian double for Ducati at Mugello
Edit Yahoo Daily News 04 Jun 2017
Andrea Dovizioso went from an upset stomach to an upset victory in winning his home grand prix at Mugello on Sunday, as MotoGP world championship leader Maverick Vinales was forced to settle for second ... "My energy wasn't so good ... ... ... ... 1 ... 2 ... 3 ... Marc Marquez (Repsol Honda Team) +5.885 ... Tito Rabat (Estrella Galicia 0,0 Marc VDS) +22.004 ... Jack Miller (Estrella Galicia 0,0 Marc VDS) + 30.779 ... Marc Marquez (Repsol Honda) - 68....
The eco guide to tinned tuna
Edit The Observer 04 Jun 2017
Whenever a sustainable seafood product reaches the shelves of UK stores I feel like doing a little dance. Step forward tinned tuna from Princes. Prosaic it may be, but it’s the first certified tuna from the Western Pacific wearing the Marine Stewardship Council’s (MSC) blue tick. It’s time to remove all non-sustainable fish from shelves and menus ... Guess what? They didn’t ... ....
Trend: Puns and picnics
Edit The National 04 Jun 2017
From picnic basket purses from WaiWai to round shades by Marc Jacobs, here are this week's hottest trends. newslide. Crafty handbags. Brazilian handbag label WaiWai has landed online at Shopbop ... • Available at www.shopbop.com; from Dh2,000. newslide. Punny T-shirts ... newslide ... newslide ... The Marc Jacobs and Jimmy Choo frames are our favourites....
Sporting Kansas City summary for June 3
Edit Kansas City Star 04 Jun 2017
Sporting Kansas City 3 Minnesota United 0 Minnesota 0 0 — 0 Kansas City 1 2 — 3 MINNESOTA. Bobby Shuttleworth; Marc Burch (Justin Davis, 64th), Brent Kallman, Jermaine Taylor, … Click to Continue » ... ....
Westboro High School graduation
Edit Worcester Telegram 04 Jun 2017
WESTBORO - Westboro High School held its commencement ceremony on June 3 at the school. Here are members of the class of 2017.Jonathan Marc AbislaimanSumoda AcharRyan Setrak AlexanderAshwini AlladaAnthony Suos AnAshley Suos AnEric Kent AndersonAvery Michael AndrewsGabriel Stephen AngeliniLeah Marie AreanoCooper John ArnoldOlivia Joy ArnoldRebekah More ArtnerJonathan Hayes AshtonNatalie Grace [...] ... ....
In this Thursday, June 1, 2017 photo, Assemblywoman Shirley Weber,...
Edit Topix 04 Jun 2017
In this Thursday, June 1, 2017 photo, Assemblywoman Shirley Weber, D-San Diego talks with Assembly Marc Levine, D-San Rafael, at the Capitol in Sacramento, Calif. The Assembly approved Weber's bill, AB1220 that would give public school teachers three years to earn a permanent status designation known as tenure ... ....
- 1
- 2
- 3
- 4
- 5
- Next page »
