- published: 17 Feb 2010
- views: 1100910
Create your page here
Wednesday, 19 October 2016
-
remove the playlistPcb
- remove the playlistPcb
back to playlist
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate way to build a circuit short of sending away to a PCB manufacturer and it's a lot more fun (+ cheaper too!).
For a full list of materials used plus more tips for etching & drilling head over to MAKE's site -
http://makezine.com/2010/02/16/circuit-skills-circuit-board-etchin/
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method.
Requirements for making PCB are Plain copper coated board,Ferric Chloride,PCB hand drill,Hacksaw blade, Iron box, LASER printer(not inkjet) and Glossy paper [photo paper].
Here Cadsoft Eagle has been used to design board layout,any other CAD tools can also be used.Acetone[nail polish remover] can be used to clean copper surface. Immerse the board for a sufficient time in boiling water for peeling off the paper.While peeling slowly remove the paper from borders don't remove it rapidly since toner might also get removed. If you miss the continuity in the toner mask or if toner gets distorted [path or any small area of design] while peeling off the paper use Permanent marker[like CD maker] to manually draw the path before etching,wash the toner transferred board with plain water and make it dry before drawing with Permanent marker. For fast etching stir the Ferric Chloride solution for every 2 minutes.Air pump agitator[like aquarium air pump] also speeds up the etching process by bubbling through the solution and warm solution can also be used for doing this.
The board made in this video is for object tracking robot using Atmega328p and Xbee Pro.
Thanks to Rashmi..
- published: 18 May 2012
- views: 235997
How To Make A PCB .
SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1
- Follow Me:
Facebook: https://www.facebook.com/Llegavideos
Twitter: https://twitter.com/LlegaVideos
Instagram: https://www.instagram.com/llegavideos
- CAVEAT:
This video is just to show what can be done with household materials.
No weapons or conduct experiments shown here without adult supervision. And taking all appropriate protective measures.
I am not responsible for any misuse, which can give you the information shown here.
- published: 31 Jan 2015
- views: 44585
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home.
- published: 26 Sep 2015
- views: 27141
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication of a bare printed circuit board.
- published: 01 Nov 2013
- views: 108918
Twitter: https://twitter.com/GreatScottLab
Facebook: https://www.facebook.com/greatscottlab
Previous video:http://youtu.be/oaMJR1gpKD0
trace width calculator: http://circuitcalculator.com/wordpress/2006/01/31/pcb-trace-width-calculator/
My Eagle files: http://www.mediafire.com/download/hmbc0gmsubobes5/NE555PWMBoard.rar
Download Eagle: http://www.cadsoftusa.com/download-eagle/?language=en
mm to inches: http://www.mm-to-inch.com/
In this small video series I will show you how to make your own single layer PCBs at home. I will mostly talk about the design of the board itself in part 1. The main focus will be on the program Eagle from Cadsoft.
You want to support my videos?
You can browse and buy tools&materials; from my Amazon Store. This way I get a small commission:
Amazon.de: http://astore.amazon.de/great043-21
Amazon.com:http://astore.amazon.com/gre09a-20
Amazon.co.uk: http://astore.amazon.co.uk/gre0b-21
Or you feel super generous and want to use this Amazon link as your Amazon home page. And do not worry, your purchases are all anonym and the prices are all the same:
Amazon.de:http://www.amazon.de/?_encoding=UTF8&camp;=1638&creative;=19454&linkCode;=ur2&site-redirect;=de&tag;=great043-21&linkId;=ORZEQZEOVJAFURCZ
Amazon.com:http://www.amazon.com/?_encoding=UTF8&camp;=1789&creative;=390957&linkCode;=ur2&tag;=gre09a-20&linkId;=I5NDCEAVCD2OWM4S
Amazon.co.uk:http://www.amazon.co.uk/ref=as_li_ss_tl?_encoding=UTF8&camp;=1634&creative;=19450&linkCode;=ur2&tag;=gre0b-21
- published: 29 Aug 2014
- views: 47498
Using permanent marker, a 3D printer and etching to create a PCB.
I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code for my K8200 3D-printer. A sharp metal rod is then removing the ink from the copper clad, and then it can be etched with ferric chloride. Tutorial: http://www.lamja.com/?p=635
- published: 29 Mar 2015
- views: 200786
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit boards and have them manufactured professionally.
Don’t get intimidated. Just give it a try and you will notice how easy it is. SMD / SMT to small? Just use through hole components and get the same professional appearance.
Part 2: https://www.youtube.com/watch?v=pBCLtcFwFJw
Don’t forget to visit my website: http://www.brokking.net/
Parts from the Eurocircuit video are used with written permission. You can check out the complete video here:
https://www.youtube.com/watch?v=sIV0icM_Ujo
- published: 18 Mar 2016
- views: 5886
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else to kill it.
GoPro's Used:
Hero4 Silver
Shoutouts to Spinnaker Beach Club, Hammerhead Fred's, and Club La Vela.
- published: 21 Mar 2016
- views: 51412
PCB
PCB may refer to:
Science and technology
Computing
Organisations
Places
Other uses
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/PCB
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
9:16Circuit Skills: Circuit Board Etching
Circuit Skills: Circuit Board EtchingCircuit Skills: Circuit Board Etching
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate way to build a circuit short of sending away to a PCB manufacturer and it's a lot more fun (+ cheaper too!). For a full list of materials used plus more tips for etching & drilling head over to MAKE's site - http://makezine.com/2010/02/16/circuit-skills-circuit-board-etchin/ -
4:38Making of PCBs at home, DIY using inexpenive materials
Making of PCBs at home, DIY using inexpenive materialsMaking of PCBs at home, DIY using inexpenive materials
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method. Requirements for making PCB are Plain copper coated board,Ferric Chloride,PCB hand drill,Hacksaw blade, Iron box, LASER printer(not inkjet) and Glossy paper [photo paper]. Here Cadsoft Eagle has been used to design board layout,any other CAD tools can also be used.Acetone[nail polish remover] can be used to clean copper surface. Immerse the board for a sufficient time in boiling water for peeling off the paper.While peeling slowly remove the paper from borders don't remove it rapidly since toner might also get removed. If you miss the continuity in the toner mask or if toner gets distorted [path or any small area of design] while peeling off the paper use Permanent marker[like CD maker] to manually draw the path before etching,wash the toner transferred board with plain water and make it dry before drawing with Permanent marker. For fast etching stir the Ferric Chloride solution for every 2 minutes.Air pump agitator[like aquarium air pump] also speeds up the etching process by bubbling through the solution and warm solution can also be used for doing this. The board made in this video is for object tracking robot using Atmega328p and Xbee Pro. Thanks to Rashmi.. -
3:56✔ How To Make A PCB
✔ How To Make A PCB✔ How To Make A PCB
How To Make A PCB . SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1 - Follow Me: Facebook: https://www.facebook.com/Llegavideos Twitter: https://twitter.com/LlegaVideos Instagram: https://www.instagram.com/llegavideos - CAVEAT: This video is just to show what can be done with household materials. No weapons or conduct experiments shown here without adult supervision. And taking all appropriate protective measures. I am not responsible for any misuse, which can give you the information shown here. -
7:09How to make a Printed Circuit Board (PCB) at home
How to make a Printed Circuit Board (PCB) at homeHow to make a Printed Circuit Board (PCB) at home
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home. -
16:47PCB Fabrication Process Tour
PCB Fabrication Process TourPCB Fabrication Process Tour
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication of a bare printed circuit board. -
4:31PCB vs. Team Bella: Raw, October 26, 2015
PCB vs. Team Bella: Raw, October 26, 2015 -
4:35Homemade PCB Etching (through hole parts) - Part 1
Homemade PCB Etching (through hole parts) - Part 1Homemade PCB Etching (through hole parts) - Part 1
Twitter: https://twitter.com/GreatScottLab Facebook: https://www.facebook.com/greatscottlab Previous video:http://youtu.be/oaMJR1gpKD0 trace width calculator: http://circuitcalculator.com/wordpress/2006/01/31/pcb-trace-width-calculator/ My Eagle files: http://www.mediafire.com/download/hmbc0gmsubobes5/NE555PWMBoard.rar Download Eagle: http://www.cadsoftusa.com/download-eagle/?language=en mm to inches: http://www.mm-to-inch.com/ In this small video series I will show you how to make your own single layer PCBs at home. I will mostly talk about the design of the board itself in part 1. The main focus will be on the program Eagle from Cadsoft. You want to support my videos? You can browse and buy tools&materials; from my Amazon Store. This way I get a small commission: Amazon.de: http://astore.amazon.de/great043-21 Amazon.com:http://astore.amazon.com/gre09a-20 Amazon.co.uk: http://astore.amazon.co.uk/gre0b-21 Or you feel super generous and want to use this Amazon link as your Amazon home page. And do not worry, your purchases are all anonym and the prices are all the same: Amazon.de:http://www.amazon.de/?_encoding=UTF8&camp;=1638&creative;=19454&linkCode;=ur2&site-redirect;=de&tag;=great043-21&linkId;=ORZEQZEOVJAFURCZ Amazon.com:http://www.amazon.com/?_encoding=UTF8&camp;=1789&creative;=390957&linkCode;=ur2&tag;=gre09a-20&linkId;=I5NDCEAVCD2OWM4S Amazon.co.uk:http://www.amazon.co.uk/ref=as_li_ss_tl?_encoding=UTF8&camp;=1634&creative;=19450&linkCode;=ur2&tag;=gre0b-21 -
7:57Making PCB with 3D printer and permanent marker
Making PCB with 3D printer and permanent markerMaking PCB with 3D printer and permanent marker
Using permanent marker, a 3D printer and etching to create a PCB. I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code for my K8200 3D-printer. A sharp metal rod is then removing the ink from the copper clad, and then it can be etched with ferric chloride. Tutorial: http://www.lamja.com/?p=635 -
8:45Make your own professional printed circuit board (PCB) - part 1
Make your own professional printed circuit board (PCB) - part 1Make your own professional printed circuit board (PCB) - part 1
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit boards and have them manufactured professionally. Don’t get intimidated. Just give it a try and you will notice how easy it is. SMD / SMT to small? Just use through hole components and get the same professional appearance. Part 2: https://www.youtube.com/watch?v=pBCLtcFwFJw Don’t forget to visit my website: http://www.brokking.net/ Parts from the Eurocircuit video are used with written permission. You can check out the complete video here: https://www.youtube.com/watch?v=sIV0icM_Ujo -
3:52SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else to kill it. GoPro's Used: Hero4 Silver Shoutouts to Spinnaker Beach Club, Hammerhead Fred's, and Club La Vela.
P.C.B.
ALBUMS
- Louie DeVito Presents Pacha New York released: 2007
- Minimal House released: 2007
- Pacha – Mixed by Kaz James (Bodyrockers) released: 2006
- InTheMix.05 released: 2005
- Technodrome, Volume 21 released: 2004
Louie DeVito Presents Pacha New York
Released 2007- add to main playlist Play in Full Screen Love Is Gone (Fred Riester & Joachim Garraud remix)
- add to main playlist Play in Full Screen Shining Star (Pornocult vocal mix)
- add to main playlist Play in Full Screen Bring the Noise Remix (Pump-Kin instrumental)
- add to main playlist Play in Full Screen Higher State of Consciousness (dirty South & TV Rock club mix)
- add to main playlist Play in Full Screen Your Love (Mondo remix)
- add to main playlist Play in Full Screen I Want Your Soul (original)
- add to main playlist Play in Full Screen Rise Up (club mix)
- add to main playlist Play in Full Screen Do It Again
- add to main playlist Play in Full Screen Calabria 2007 (club mix)
- add to main playlist Play in Full Screen Let the Beats Roll (club mix)
- add to main playlist Play in Full Screen By Any Demand (original)
- add to main playlist Play in Full Screen I Found U (Remode mix)
Minimal House
Released 2007- add to main playlist Play in Full Screen Eight to Nine
- add to main playlist Play in Full Screen Ring My Bell
- add to main playlist Play in Full Screen Cloudy Bay
- add to main playlist Play in Full Screen Battle Twig
- add to main playlist Play in Full Screen Bionik
- add to main playlist Play in Full Screen Flashback Clock 9
- add to main playlist Play in Full Screen Basic Needs
- add to main playlist Play in Full Screen Fashion Show
- add to main playlist Play in Full Screen Yasmin
- add to main playlist Play in Full Screen Love It
- add to main playlist Play in Full Screen Don't Speak
Pacha – Mixed by Kaz James (Bodyrockers)
Released 2006- add to main playlist Play in Full Screen Your Loving Arms (Bush II Bush remix)
- add to main playlist Play in Full Screen Love Is (Cabin Crew remix)
- add to main playlist Play in Full Screen In White Rooms (Neo mix)
- add to main playlist Play in Full Screen Les Djinns (Trentemöller remix)
- add to main playlist Play in Full Screen Jumbo
- add to main playlist Play in Full Screen Ant Music (DJ Sing remix)
- add to main playlist Play in Full Screen Round and Round (Switch remix)
- add to main playlist Play in Full Screen Boy
- add to main playlist Play in Full Screen Stepping to the Beat (Dave McDonald mix)
- add to main playlist Play in Full Screen No Control
- add to main playlist Play in Full Screen At Night
- add to main playlist Play in Full Screen Ringshifter
- add to main playlist Play in Full Screen What Else Is There? (Trentemöller remix)
- add to main playlist Play in Full Screen Lost (D. Ramirez remix)
- add to main playlist Play in Full Screen (Pray Like) Aretha Franklin (Van She Tech Ebs mix)
- add to main playlist Play in Full Screen Fairlight (12" original)
- add to main playlist Play in Full Screen Rej
InTheMix.05
Released 2005- add to main playlist Play in Full Screen Warning Siren (Buick Project remix)
- add to main playlist Play in Full Screen Needy Girl (Zdar dub)
- add to main playlist Play in Full Screen Charivari
- add to main playlist Play in Full Screen Washing Up (Tiga's Na Na Na Na Na Na mix)
- add to main playlist Play in Full Screen Basement Music
- add to main playlist Play in Full Screen Do It Don't Stop
- add to main playlist Play in Full Screen All I Ever Wanted
- add to main playlist Play in Full Screen Medusa Smile
- add to main playlist Play in Full Screen You Gonna Want Me
- add to main playlist Play in Full Screen Stop 2 (Dexter remix)
- add to main playlist Play in Full Screen Electro Hip
- add to main playlist Play in Full Screen Big n Dirty (Tiga remix)
- add to main playlist Play in Full Screen Louder Than a Bomb
- add to main playlist Play in Full Screen Volta 82
- add to main playlist Play in Full Screen John's Addiction
- add to main playlist Play in Full Screen Klickin'
- add to main playlist Play in Full Screen Concept
- add to main playlist Play in Full Screen Morse Code From the Cold War
- add to main playlist Play in Full Screen Crying Hero (Tiga remix)
- add to main playlist Play in Full Screen Walking Away (Tocadisco mix)
- add to main playlist Play in Full Screen Idealistic (Voyage mix)
- add to main playlist Play in Full Screen Tribulations (Tiga's Out of the Trance Closet mix)
Technodrome, Volume 21
Released 2004- add to main playlist Play in Full Screen Intro
- add to main playlist Play in Full Screen Monstertruckdriver
- add to main playlist Play in Full Screen Rocker
- add to main playlist Play in Full Screen The Gain (Luca Morris mix)
- add to main playlist Play in Full Screen Garbage Queen (Andrea Doria remix)
- add to main playlist Play in Full Screen Give Me the Fire
- add to main playlist Play in Full Screen Days of Glory
- add to main playlist Play in Full Screen Music Awards (Tonyboy remix)
- add to main playlist Play in Full Screen What Would We Do (original extended)
- add to main playlist Play in Full Screen Beauty in L.A.
- add to main playlist Play in Full Screen One Solid Wave
- add to main playlist Play in Full Screen Latin Lovers
- add to main playlist Play in Full Screen Rythm Queen (Voodooamt remix)
- add to main playlist Play in Full Screen Carnival (Max Walder remix)
- add to main playlist Play in Full Screen Breaks of Death (feat. Mateo Murphy & Preach) (Preach mix)
- add to main playlist Play in Full Screen Virgin Japanese
- add to main playlist Play in Full Screen Hey You (Eric Sneo remix)
- add to main playlist Play in Full Screen Praiseworthy Tunes (Hoipolli mix)
- add to main playlist Play in Full Screen Reality Control
-
Circuit Skills: Circuit Board Etching
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate way to build a circuit short of sending away to a PCB manufacturer and it's a lot more fun (+ cheaper too!). For a full list of materials used plus more tips for etching & drilling head over to MAKE's site - http://makezine.com/2010/02/16/circuit-skills-circuit-board-etchin/
published: 17 Feb 2010 -
Making of PCBs at home, DIY using inexpenive materials
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method. Requirements for making PCB are Plain copper coated board,Ferric Chloride,PCB hand drill,Hacksaw blade, Iron box, LASER printer(not inkjet) and Glossy paper [photo paper]. Here Cadsoft Eagle has been used to design board layout,any other CAD tools can also be used.Acetone[nail polish remover] can be used to clean copper surface. Immerse the board for a sufficient time in boiling water for peeling off the paper.While peeling slowly remove the paper from borders don't remove it rapidly since toner might also get removed. If you miss the continuity in the toner mask or if toner gets distorted [path or any small area of design] while peeling off ...
published: 18 May 2012 -
✔ How To Make A PCB
How To Make A PCB . SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1 - Follow Me: Facebook: https://www.facebook.com/Llegavideos Twitter: https://twitter.com/LlegaVideos Instagram: https://www.instagram.com/llegavideos - CAVEAT: This video is just to show what can be done with household materials. No weapons or conduct experiments shown here without adult supervision. And taking all appropriate protective measures. I am not responsible for any misuse, which can give you the information shown here.
published: 31 Jan 2015 -
How to make a Printed Circuit Board (PCB) at home
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home.
published: 26 Sep 2015 -
PCB Fabrication Process Tour
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication of a bare printed circuit board.
published: 01 Nov 2013 -
-
Homemade PCB Etching (through hole parts) - Part 1
Twitter: https://twitter.com/GreatScottLab Facebook: https://www.facebook.com/greatscottlab Previous video:http://youtu.be/oaMJR1gpKD0 trace width calculator: http://circuitcalculator.com/wordpress/2006/01/31/pcb-trace-width-calculator/ My Eagle files: http://www.mediafire.com/download/hmbc0gmsubobes5/NE555PWMBoard.rar Download Eagle: http://www.cadsoftusa.com/download-eagle/?language=en mm to inches: http://www.mm-to-inch.com/ In this small video series I will show you how to make your own single layer PCBs at home. I will mostly talk about the design of the board itself in part 1. The main focus will be on the program Eagle from Cadsoft. You want to support my videos? You can browse and buy tools&materials; from my Amazon Store. This way I get a small commission: Amazon.de: http://astor...
published: 29 Aug 2014 -
Making PCB with 3D printer and permanent marker
Using permanent marker, a 3D printer and etching to create a PCB. I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code for my K8200 3D-printer. A sharp metal rod is then removing the ink from the copper clad, and then it can be etched with ferric chloride. Tutorial: http://www.lamja.com/?p=635
published: 29 Mar 2015 -
Make your own professional printed circuit board (PCB) - part 1
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit boards and have them manufactured professionally. Don’t get intimidated. Just give it a try and you will notice how easy it is. SMD / SMT to small? Just use through hole components and get the same professional appearance. Part 2: https://www.youtube.com/watch?v=pBCLtcFwFJw Don’t forget to visit my website: http://www.brokking.net/ Parts from the Eurocircuit video are used with written permission. You can check out the complete video here: https://www.youtube.com/watch?v=sIV0icM_Ujo
published: 18 Mar 2016 -
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else to kill it. GoPro's Used: Hero4 Silver Shoutouts to Spinnaker Beach Club, Hammerhead Fred's, and Club La Vela.
published: 21 Mar 2016
Circuit Skills: Circuit Board Etching
- Order: Reorder
- Duration: 9:16
- Updated: 17 Feb 2010
- views: 1100910
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate w...
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate way to build a circuit short of sending away to a PCB manufacturer and it's a lot more fun (+ cheaper too!).
For a full list of materials used plus more tips for etching & drilling head over to MAKE's site -
http://makezine.com/2010/02/16/circuit-skills-circuit-board-etchin/
wn.com/Circuit Skills Circuit Board Etching
Making your own printed circuit board can be a truly satisfying process, tying together electronics and the handmade craft of etching. It's the most accurate way to build a circuit short of sending away to a PCB manufacturer and it's a lot more fun (+ cheaper too!).
For a full list of materials used plus more tips for etching & drilling head over to MAKE's site -
http://makezine.com/2010/02/16/circuit-skills-circuit-board-etchin/
- published: 17 Feb 2010
- views: 1100910
Making of PCBs at home, DIY using inexpenive materials
- Order: Reorder
- Duration: 4:38
- Updated: 18 May 2012
- views: 235997
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method.
Requiremen...
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method.
Requirements for making PCB are Plain copper coated board,Ferric Chloride,PCB hand drill,Hacksaw blade, Iron box, LASER printer(not inkjet) and Glossy paper [photo paper].
Here Cadsoft Eagle has been used to design board layout,any other CAD tools can also be used.Acetone[nail polish remover] can be used to clean copper surface. Immerse the board for a sufficient time in boiling water for peeling off the paper.While peeling slowly remove the paper from borders don't remove it rapidly since toner might also get removed. If you miss the continuity in the toner mask or if toner gets distorted [path or any small area of design] while peeling off the paper use Permanent marker[like CD maker] to manually draw the path before etching,wash the toner transferred board with plain water and make it dry before drawing with Permanent marker. For fast etching stir the Ferric Chloride solution for every 2 minutes.Air pump agitator[like aquarium air pump] also speeds up the etching process by bubbling through the solution and warm solution can also be used for doing this.
The board made in this video is for object tracking robot using Atmega328p and Xbee Pro.
Thanks to Rashmi..
wn.com/Making Of Pcbs At Home, Diy Using Inexpenive Materials
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with available inexpensive materials using toner transfer method.
Requirements for making PCB are Plain copper coated board,Ferric Chloride,PCB hand drill,Hacksaw blade, Iron box, LASER printer(not inkjet) and Glossy paper [photo paper].
Here Cadsoft Eagle has been used to design board layout,any other CAD tools can also be used.Acetone[nail polish remover] can be used to clean copper surface. Immerse the board for a sufficient time in boiling water for peeling off the paper.While peeling slowly remove the paper from borders don't remove it rapidly since toner might also get removed. If you miss the continuity in the toner mask or if toner gets distorted [path or any small area of design] while peeling off the paper use Permanent marker[like CD maker] to manually draw the path before etching,wash the toner transferred board with plain water and make it dry before drawing with Permanent marker. For fast etching stir the Ferric Chloride solution for every 2 minutes.Air pump agitator[like aquarium air pump] also speeds up the etching process by bubbling through the solution and warm solution can also be used for doing this.
The board made in this video is for object tracking robot using Atmega328p and Xbee Pro.
Thanks to Rashmi..
- published: 18 May 2012
- views: 235997
✔ How To Make A PCB
- Order: Reorder
- Duration: 3:56
- Updated: 31 Jan 2015
- views: 44585
How To Make A PCB .
SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1
- Follow Me:
Facebook: https://www.facebook.com/Llegavideos
Twitter: ...
How To Make A PCB .
SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1
- Follow Me:
Facebook: https://www.facebook.com/Llegavideos
Twitter: https://twitter.com/LlegaVideos
Instagram: https://www.instagram.com/llegavideos
- CAVEAT:
This video is just to show what can be done with household materials.
No weapons or conduct experiments shown here without adult supervision. And taking all appropriate protective measures.
I am not responsible for any misuse, which can give you the information shown here.
wn.com/✔ How To Make A Pcb
How To Make A PCB .
SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1
- Follow Me:
Facebook: https://www.facebook.com/Llegavideos
Twitter: https://twitter.com/LlegaVideos
Instagram: https://www.instagram.com/llegavideos
- CAVEAT:
This video is just to show what can be done with household materials.
No weapons or conduct experiments shown here without adult supervision. And taking all appropriate protective measures.
I am not responsible for any misuse, which can give you the information shown here.
- published: 31 Jan 2015
- views: 44585
How to make a Printed Circuit Board (PCB) at home
- Order: Reorder
- Duration: 7:09
- Updated: 26 Sep 2015
- views: 27141
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home.
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home.
wn.com/How To Make A Printed Circuit Board (Pcb) At Home
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you will be able to make your own PCB at home.
- published: 26 Sep 2015
- views: 27141
PCB Fabrication Process Tour
- Order: Reorder
- Duration: 16:47
- Updated: 01 Nov 2013
- views: 108918
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication ...
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication of a bare printed circuit board.
wn.com/Pcb Fabrication Process Tour
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit board house detailing the various processes involved in the fabrication of a bare printed circuit board.
- published: 01 Nov 2013
- views: 108918
PCB vs. Team Bella: Raw, October 26, 2015
- Order: Reorder
- Duration: 4:31
- Updated: 27 Oct 2015
- views: 2022137
Are Paige, Charlotte and Becky Lynch finally back together again? More ACTION on WWE NETWORK : http://bit.ly/MobQRl
Are Paige, Charlotte and Becky Lynch finally back together again? More ACTION on WWE NETWORK : http://bit.ly/MobQRl
wn.com/Pcb Vs. Team Bella Raw, October 26, 2015
Homemade PCB Etching (through hole parts) - Part 1
- Order: Reorder
- Duration: 4:35
- Updated: 29 Aug 2014
- views: 47498
Twitter: https://twitter.com/GreatScottLab
Facebook: https://www.facebook.com/greatscottlab
Previous video:http://youtu.be/oaMJR1gpKD0
trace width calculator: h...
Twitter: https://twitter.com/GreatScottLab
Facebook: https://www.facebook.com/greatscottlab
Previous video:http://youtu.be/oaMJR1gpKD0
trace width calculator: http://circuitcalculator.com/wordpress/2006/01/31/pcb-trace-width-calculator/
My Eagle files: http://www.mediafire.com/download/hmbc0gmsubobes5/NE555PWMBoard.rar
Download Eagle: http://www.cadsoftusa.com/download-eagle/?language=en
mm to inches: http://www.mm-to-inch.com/
In this small video series I will show you how to make your own single layer PCBs at home. I will mostly talk about the design of the board itself in part 1. The main focus will be on the program Eagle from Cadsoft.
You want to support my videos?
You can browse and buy tools&materials; from my Amazon Store. This way I get a small commission:
Amazon.de: http://astore.amazon.de/great043-21
Amazon.com:http://astore.amazon.com/gre09a-20
Amazon.co.uk: http://astore.amazon.co.uk/gre0b-21
Or you feel super generous and want to use this Amazon link as your Amazon home page. And do not worry, your purchases are all anonym and the prices are all the same:
Amazon.de:http://www.amazon.de/?_encoding=UTF8&camp;=1638&creative;=19454&linkCode;=ur2&site-redirect;=de&tag;=great043-21&linkId;=ORZEQZEOVJAFURCZ
Amazon.com:http://www.amazon.com/?_encoding=UTF8&camp;=1789&creative;=390957&linkCode;=ur2&tag;=gre09a-20&linkId;=I5NDCEAVCD2OWM4S
Amazon.co.uk:http://www.amazon.co.uk/ref=as_li_ss_tl?_encoding=UTF8&camp;=1634&creative;=19450&linkCode;=ur2&tag;=gre0b-21
wn.com/Homemade Pcb Etching (Through Hole Parts) Part 1
Twitter: https://twitter.com/GreatScottLab
Facebook: https://www.facebook.com/greatscottlab
Previous video:http://youtu.be/oaMJR1gpKD0
trace width calculator: http://circuitcalculator.com/wordpress/2006/01/31/pcb-trace-width-calculator/
My Eagle files: http://www.mediafire.com/download/hmbc0gmsubobes5/NE555PWMBoard.rar
Download Eagle: http://www.cadsoftusa.com/download-eagle/?language=en
mm to inches: http://www.mm-to-inch.com/
In this small video series I will show you how to make your own single layer PCBs at home. I will mostly talk about the design of the board itself in part 1. The main focus will be on the program Eagle from Cadsoft.
You want to support my videos?
You can browse and buy tools&materials; from my Amazon Store. This way I get a small commission:
Amazon.de: http://astore.amazon.de/great043-21
Amazon.com:http://astore.amazon.com/gre09a-20
Amazon.co.uk: http://astore.amazon.co.uk/gre0b-21
Or you feel super generous and want to use this Amazon link as your Amazon home page. And do not worry, your purchases are all anonym and the prices are all the same:
Amazon.de:http://www.amazon.de/?_encoding=UTF8&camp;=1638&creative;=19454&linkCode;=ur2&site-redirect;=de&tag;=great043-21&linkId;=ORZEQZEOVJAFURCZ
Amazon.com:http://www.amazon.com/?_encoding=UTF8&camp;=1789&creative;=390957&linkCode;=ur2&tag;=gre09a-20&linkId;=I5NDCEAVCD2OWM4S
Amazon.co.uk:http://www.amazon.co.uk/ref=as_li_ss_tl?_encoding=UTF8&camp;=1634&creative;=19450&linkCode;=ur2&tag;=gre0b-21
- published: 29 Aug 2014
- views: 47498
Making PCB with 3D printer and permanent marker
- Order: Reorder
- Duration: 7:57
- Updated: 29 Mar 2015
- views: 200786
Using permanent marker, a 3D printer and etching to create a PCB.
I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code ...
Using permanent marker, a 3D printer and etching to create a PCB.
I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code for my K8200 3D-printer. A sharp metal rod is then removing the ink from the copper clad, and then it can be etched with ferric chloride. Tutorial: http://www.lamja.com/?p=635
wn.com/Making Pcb With 3D Printer And Permanent Marker
Using permanent marker, a 3D printer and etching to create a PCB.
I used FreePCB to create PCB layout and a gerber-file. I then used Flatcam to generate g-code for my K8200 3D-printer. A sharp metal rod is then removing the ink from the copper clad, and then it can be etched with ferric chloride. Tutorial: http://www.lamja.com/?p=635
- published: 29 Mar 2015
- views: 200786
Make your own professional printed circuit board (PCB) - part 1
- Order: Reorder
- Duration: 8:45
- Updated: 18 Mar 2016
- views: 5886
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit board...
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit boards and have them manufactured professionally.
Don’t get intimidated. Just give it a try and you will notice how easy it is. SMD / SMT to small? Just use through hole components and get the same professional appearance.
Part 2: https://www.youtube.com/watch?v=pBCLtcFwFJw
Don’t forget to visit my website: http://www.brokking.net/
Parts from the Eurocircuit video are used with written permission. You can check out the complete video here:
https://www.youtube.com/watch?v=sIV0icM_Ujo
wn.com/Make Your Own Professional Printed Circuit Board (Pcb) Part 1
Making a professional looking printed circuit board or PCB is a very satisfying process. In this video I will show you how I design my own printed circuit boards and have them manufactured professionally.
Don’t get intimidated. Just give it a try and you will notice how easy it is. SMD / SMT to small? Just use through hole components and get the same professional appearance.
Part 2: https://www.youtube.com/watch?v=pBCLtcFwFJw
Don’t forget to visit my website: http://www.brokking.net/
Parts from the Eurocircuit video are used with written permission. You can check out the complete video here:
https://www.youtube.com/watch?v=sIV0icM_Ujo
- published: 18 Mar 2016
- views: 5886
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
- Order: Reorder
- Duration: 3:52
- Updated: 21 Mar 2016
- views: 51412
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else...
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else to kill it.
GoPro's Used:
Hero4 Silver
Shoutouts to Spinnaker Beach Club, Hammerhead Fred's, and Club La Vela.
wn.com/Spring Break 2016 Panama City Beach Best Pcb Video
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). Definitely less people than last year but PCB still has everything else to kill it.
GoPro's Used:
Hero4 Silver
Shoutouts to Spinnaker Beach Club, Hammerhead Fred's, and Club La Vela.
- published: 21 Mar 2016
- views: 51412
back
- Playlist
- Chat
back
- Playlist
- Chat
9:16
Circuit Skills: Circuit Board Etching
Making your own printed circuit board can be a truly satisfying process, tying together el...
published: 17 Feb 2010
Circuit Skills: Circuit Board Etching
Circuit Skills: Circuit Board Etching
- Report rights infringement
- published: 17 Feb 2010
- views: 1100910
4:38
Making of PCBs at home, DIY using inexpenive materials
An easily understandable video demonstration of how to make PCBs(Fabricate) at home with a...
published: 18 May 2012
Making of PCBs at home, DIY using inexpenive materials
Making of PCBs at home, DIY using inexpenive materials
- Report rights infringement
- published: 18 May 2012
- views: 235997
3:56
✔ How To Make A PCB
How To Make A PCB .
SUBSCRIBE: http://www.youtube.com/user/LlegaWeapon?sub_confirmation=1
...
published: 31 Jan 2015
✔ How To Make A PCB
✔ How To Make A PCB
- Report rights infringement
- published: 31 Jan 2015
- views: 44585
7:09
How to make a Printed Circuit Board (PCB) at home
How to make a Printed Circuit Board (PCB) at home. By watching this simple tutorial, you w...
published: 26 Sep 2015
How to make a Printed Circuit Board (PCB) at home
How to make a Printed Circuit Board (PCB) at home
- Report rights infringement
- published: 26 Sep 2015
- views: 27141
16:47
PCB Fabrication Process Tour
Step-by-step tour of domestic manufacturer Saturn Electronics Corporation metro Detroit bo...
published: 01 Nov 2013
PCB Fabrication Process Tour
PCB Fabrication Process Tour
- Report rights infringement
- published: 01 Nov 2013
- views: 108918
4:31
PCB vs. Team Bella: Raw, October 26, 2015
Are Paige, Charlotte and Becky Lynch finally back together again? More ACTION on WWE NETWO...
published: 27 Oct 2015
PCB vs. Team Bella: Raw, October 26, 2015
PCB vs. Team Bella: Raw, October 26, 2015
- Report rights infringement
- published: 27 Oct 2015
- views: 2022137
4:35
Homemade PCB Etching (through hole parts) - Part 1
Twitter: https://twitter.com/GreatScottLab
Facebook: https://www.facebook.com/greatscottla...
published: 29 Aug 2014
Homemade PCB Etching (through hole parts) - Part 1
Homemade PCB Etching (through hole parts) - Part 1
- Report rights infringement
- published: 29 Aug 2014
- views: 47498
7:57
Making PCB with 3D printer and permanent marker
Using permanent marker, a 3D printer and etching to create a PCB.
I used FreePCB to create...
published: 29 Mar 2015
Making PCB with 3D printer and permanent marker
Making PCB with 3D printer and permanent marker
- Report rights infringement
- published: 29 Mar 2015
- views: 200786
8:45
Make your own professional printed circuit board (PCB) - part 1
Making a professional looking printed circuit board or PCB is a very satisfying process. I...
published: 18 Mar 2016
Make your own professional printed circuit board (PCB) - part 1
Make your own professional printed circuit board (PCB) - part 1
- Report rights infringement
- published: 18 Mar 2016
- views: 5886
3:52
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
The Super Six (minus 1) takes on the second week of PCB, Panama City Beach (March 5-12). D...
published: 21 Mar 2016
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
SPRING BREAK 2016 Panama City Beach - BEST PCB VIDEO!
- Report rights infringement
- published: 21 Mar 2016
- views: 51412
Circuit Skills: Circuit Board Etching...
Making of PCBs at home, DIY using inexpenive mater...
✔ How To Make A PCB...
How to make a Printed Circuit Board (PCB) at home...
PCB Fabrication Process Tour...
PCB vs. Team Bella: Raw, October 26, 2015...
Homemade PCB Etching (through hole parts) - Part 1...
Making PCB with 3D printer and permanent marker...
Make your own professional printed circuit board (...
SPRING BREAK 2016 Panama City Beach - BEST PCB VID...
-
Lyrics list:lyrics
-
Still Uneasy
-
Sinner Inside
-
Field Of Darkness
-
Not What I Want
-
You
-
Superstar
-
Strong Reaction
-
Beau Coup
-
Sweet Rachel
-
Still In My Heart
-
Still Uneasy
The other day I said to you
I know what you want to do
I could never sit around
While you´re feeling down
And I could never compromise
My situation lies
And I would never feel the same
Would you be the blame?
Would you leave me
Still uneasy
Locked inside of
Torn in spite of
I don´t want to, I don´t want to know
Sometimes when you´re all alone
Hiding what you´re thinking of
I could never sit around
While you´re feeling down
I could never see my self
Chasing something else
I would never get away
Would you feel the same?
Would you leave me
Still uneasy
Trapped inside of
Torn in spite of
I don´t want to, I don´t want to know
Sometimes when I´m all alone
Feeling what you´re thinking of
And I could never sit around
Chained to frozen ground
I could never see my self
Playing for something else
And I could never walk away
Would you feel the same?
Would you leave me
Still uneasy
Trapped inside of
Torn in spite of
back
Saudi Arabia Executes Royal Family Member for Murder
Edit Bloomberg 19 Oct 2016
A Saudi prince has been executed after he was convicted of murder, a rare punishment for a member of the royal family in the conservative kingdom. Prince Turki bin Saud bin Turki bin Saud Al Kabir was found guilty of shooting another Saudi national after a brawl ... Twitter. Mohamad Bazzi on Twitter ... ....
back
Michael Moore Premieres US Presidential Election Film
Edit WorldNews.com 19 Oct 2016
Filmmaker Michael Moore has premiered a surprise film discussing the presidential election just three weeks before Americans head to vote in the next quadrennial election, The Associated Press reported Wednesday.The film premiered in New York Tuesday night in front of an audience of his fans, The Hollywood Reporter said ... It will also be shown at a theater in Encino, California.Moore says he hopes more theaters will be announced soon. ....
back
Will The Private Or Public Hillary Clinton Show Up At Tonight’s Debate?
Edit WorldNews.com 19 Oct 2016
Article by WN.com Correspondent Dallas DarlingSince Americans believe integrity is being honest and truthful even when no one is looking, many wonder if the private or public Hillary Clinton will show up at tonight’s debate ... What’s more, not only do hacked emails raise possibilities of ethics breaches as U.S. Secretary of State, but quid pro quos for the Clinton Foundation and Clinton Global Initiative (CGI) ... and overseas ... Publicly, Mrs....
back
The cyber-war on WikiLeaks
Edit Open Democracy 19 Oct 2016
WikiLeaks is not only influencing the US elections, but transforming the US elections – as they should have been from the very beginning – into a global debate. Srećko Horvat & Julian Assange at the Ecuadorian Embassy in London – Sunshine Press Publications. All rights reserved.When the ruling class is in panic, their first reaction is to hide the panic. They react out of cynicism ... It is not a cyber war with Russia, but with WikiLeaks ... ....
back
Russian Hacker Suspected Of US Cyberattacks Arrested By Czech Police: Report
Edit WorldNews.com 19 Oct 2016
A Russian hacker suspected of cyberattacks in the United States has been arrested by Czech police, officials told the Associated Press Wednesday.Police said an international warrant for the man, who was not identified, was issued by Interpol and officers cooperated with the US Federal Bureau of Investigation on the case, the report said. Police spokesman Jozef Bocan said the man was arrested in a Prague hotel....
PCB chief to return home from London after heart surgery
Edit The Hindu 19 Oct 2016
Pakistan Cricket Board (PCB) chairman, Shaharyar Khan will return home from London tomorrow finally putting paid to all speculations about his stepping down from the post ... “Yes Shaharyar will reach Lahore on Thursday morning and will be taking charge of the PCB affairs as soon he reaches home,” one source in the PCB told PTI ... Shaharyar Khan, PCB ....
Global Electronic Design Automation for PCB and MCM Market to Grow 3.27% by 2020 - ...
Edit PR Newswire 19 Oct 2016
DUBLIN, October 19, 2016 /PRNewswire/ -- Research and Markets has announced the addition of the "Global Electronic Design Automation for PCB and MCM Market 2016-2020" report to their offering. The report forecasts the global electronic design automation (EDA) for PCB and MCM ... ....
Confusion mars road work
Edit The Times of India 19 Oct 2016
The charge of roads in the cantonment area is divided among three agencies, including the Pune Cantonment Board (PCB), Military Engineering Services (MES) and the public works department (PWD) ... While most of the road-length is held by the PCB (around 48km), around 22km of road are under the custody of the MES, and about 5km - the length of Solapur Road/Shankarsheth Road - is held by the state PWD....
UAE-based Pakistan Super League to host 2017 final in Lahore: 'It will be a fly ...
Edit The National 19 Oct 2016
Pakistan will stage the 2017 final of their Twenty20 franchise league in Lahore but teams will fly in and fly out for the showpiece event in a sobering nod to the delicate security situation in the country ... Five teams took part in the inaugural edition of the PSL which was held entirely in Dubai and Sharjah in February this year ... Pakistan Cricket Board (PCB) announced a profit of $2.6 million (Dh9.55m) from the first edition....
UAE-based Pakistan Super League to host 2017 final in Lahore: 'It will be a fly-in, ...
Edit The National 19 Oct 2016
Pakistan will stage the 2017 final of their Twenty20 franchise league in Lahore but teams will fly in and fly out for the showpiece event in a sobering nod to the delicate security situation in the country ... Five teams took part in the inaugural edition of the PSL which was held entirely in Dubai and Sharjah in February this year ... Pakistan Cricket Board (PCB) announced a profit of $2.6 million (Dh9.55m) from the first edition....
Cricket: Pakistan to stage 'fly-in, fly-out' T20 final in Lahore
Edit Yahoo Daily News 19 Oct 2016
Pakistan will stage the 2017 final of their Twenty20 franchise league in Lahore but teams will fly in and fly out for the showpiece event in a sobering nod to the delicate security situation in the country ... "International players know what we can do; most of them are ready to come to Pakistan and play." ... Pakistan Cricket Board (PCB) announced a profit of $2.6 million (260 million rupees) from the first edition. ....
Laird Business LSR Expands Sterling Family of Wi-Fi Modules with New Solutions for Embedded and 802.11ac (Laird plc)
Edit Public Technologies 19 Oct 2016
(Source. Laird plc) ... These new solutions, based on Cypress Semiconductor Corp ... That means a customer could offer both single- and dual-band Wi-Fi product versions with just a single shared PCB layout design ... The reference platform will include ... Extensive documentation, including the schematics and layout files for the carrier board, providing customers an easy-to-follow reference for integrating the Sterling-LWB into their PCB layout....
Growing Use of Medical Imaging Systems Boosting the Demand for EDA for PCB and MCM ...
Edit Business Wire 18 Oct 2016Encroachers in Cantonment areas may lose voting rights
Edit The Times of India 18 Oct 2016
People found guilty of carrying out illegal constructions in their properties on Pune Cantonment Board (PCB) land may find themselves stripped of their voting rights or their right to contest an election in the area if a recent Supreme Court judgement is implemented ... The PCB has found many cases of illegal constructions, ever since floor-space index (FSI) restrictions were implemented in 1984 at 1.0....
Match-fixing was at its worst in 1996: Shoaib Akhtar
Edit Deccan Chronicle 18 Oct 2016
Karachi. Former Pakistan pacer Shoaib Akhtar on Monday claimed that match-fixing was at its peak in 1996 and said the environment in the dressing room was far from conducive ... It was a bad environment," he added ... The 1999 World Cup final against Australia ... Following the fixing allegations in the mid-90s, the Pakistan Cricket Board (PCB) had set up a judicial commission headed by Justice Malik Qayyum to probe into the allegations ... ....
Removing Bhanpur Khanti landfill, but BMC creating another junkyard on Arera Hills
Edit The Times of India 18 Oct 2016
BHOPAL. Sick of dealing with Encroachments on roads of Bhopal is proving a biggest hurdle for Bhopal Municipal Corporation (BMC) to get it reformed as a smart city ... Though there is a gate, two broken gates, fail to serve the purpose ... They are doing openly on a highway and doesn't seem to have taken PCB permission," said environmentalist Subhash C Pandey, who took up Bhanpur Khanti case at National Green Tribunal ... RELATED....
- 1
- 2
- 3
- 4
- 5
- Next page »
