-
DIY Personal Lubricant: Natural, Organic, Safe, Slippery!
**CAUTION**
Not all essential oils are safe to use internally! Please do your research and ensure that the oil you are picking is SAFE! When/If used internally, essential oils are best paired with a carrier oil. Please use MODEST amounts ONLY!
**DISCLAIMER**
This is a water based lube which is SAFE to use with condoms. However, if you choose to add essential oils, the oil can compromise the integrity of a condom, even if it is just a small amount. If you want to ensure the lube is 100% safe to use with condoms DO NOT add essential oils.
Be safe & enjoy!
SUPPORT EAT SQUAT CUM ON PATREON: https://www.patreon.com/eatsquatcum
Join our mailing list: https://bit.ly/2QgrJ01
https://eatsquatcum.com
published: 12 Dec 2018
-
DIY Homemade Natural Viagra made Super quick & easy with just 3 Simple Ingredients!
How to make Natural Viagra at home (Works 100%) | Home Remedy for Viagra. Easy and Natural Thai Remedy.
2 Mins Homemade Viagra Recipe with simply 3 Ingredients can change your life. Tried and Tested Thai remedy for Erectile Dysfunction, Weak Erections and/or Premature Ejaculation. This common problem causes lots of unpleasant situations for couples and lovers during their relations. This drink can help overcome the situation and also good for people who are on Viagra as Medication. This drink can also help you lose weight as Sex burns about as many calories as the same amount of time spent weight training or walking so enjoy this super health and stay fit with pleasure :)
published: 04 Dec 2014
-
Watermelon Inspired Water Marble | DIY Nail Art Tutorial | Fruit by the Finger Series
Today I'll be showing you how to do this Watermelon Inspired water marble. Products used are linked below.
See more water marble nail art tutorials: http://goo.gl/DPpKba
Subscribe for new videos every week: http://goo.gl/JJaoHC
What do you think, should I have added seeds? I tested a few options before I took this off, and you can check them out here:: http://youtu.be/WbZFRiFS8zg
Want to see the testing phase of different colors for this water marble?: http://youtu.be/aRVbHVc_S3Q
►Nail polish and products used◄
-Base coat (of your choice)
-Essie - Pretty Edgy
-Essie - Going Incognito: http://amzn.to/1U9Jd98
-Orly - White Tips: http://amzn.to/1KbeK7h
-Nails Inc - Lower Regent Street: http://amzn.to/1khBbxF
-Seche Vite Fast Dry Top Coat: http://amzn.to/1K9HQUE
-5 oz paper cup: ...
published: 05 May 2013
-
DIY Liquid detergent
In this video I'm showing you how I made my own zero waste detergent.
published: 25 Sep 2016
-
Electroplating - Easy DIY Nickel, Copper, Zinc Plating
The recipe for basic electroplating.
1. Vinegar. 2. A dash of salt. 3. A piece of whatever metal you plan to use.
I recommend starting with Nickel.
I don’t know what other metals will work or not. Experiment like a mad scientist and find out. Just be careful around chemicals.
I don’t think there is anything particularly nasty about the nickel, copper, or zinc solutions. But I’m not a chemist so use your own judgment. I wear gloves and don’t go out of my way to breath the fumes. There will be a small amount of chlorine gas produced by the salt. Just don’t be a dork and you’ll live through it.
A couple of notes…
Don’t try and plate over zinc plated parts with anything other than zinc. The zinc will destroy the nickel/copper solutions. I mean, don’t let me stop you experimenting, but that’...
published: 27 Sep 2018
-
Make Cottage Cheese Two Ways With Taste Off!
Like many things in the culinary world you can make Cottage Cheese at home using two different methods or recipes. In both cases the process involves acidifying the milk (either with bacteria and enzymes, or with straight acid) which curdles the milk.
How To Make Traditional ‘Old School’ Cottage Cheese:
The traditional process involves using ‘good’ mesophilic bacteria that convert lactose into lactic acid and rennet (an enzyme) that coagulate the milk into a solid block of curd.
This block of curd is then cut into cubes, and the whey is released.
Ingredients:
4L (1 gallon) whole 3.25% milk
125 mL (½ cup) live culture kefir - or 1 packet Mesophilic Starter Culture
8-10 drops liquid rennet
Method:
Slowly heat the milk in a heavy pot to 30ºC (86ºF).
Add the kefir and stir in well.
Mix the ...
published: 28 Mar 2019
3:04
DIY Personal Lubricant: Natural, Organic, Safe, Slippery!
**CAUTION**
Not all essential oils are safe to use internally! Please do your research and ensure that the oil you are picking is SAFE! When/If used internally,...
**CAUTION**
Not all essential oils are safe to use internally! Please do your research and ensure that the oil you are picking is SAFE! When/If used internally, essential oils are best paired with a carrier oil. Please use MODEST amounts ONLY!
**DISCLAIMER**
This is a water based lube which is SAFE to use with condoms. However, if you choose to add essential oils, the oil can compromise the integrity of a condom, even if it is just a small amount. If you want to ensure the lube is 100% safe to use with condoms DO NOT add essential oils.
Be safe & enjoy!
SUPPORT EAT SQUAT CUM ON PATREON: https://www.patreon.com/eatsquatcum
Join our mailing list: https://bit.ly/2QgrJ01
https://eatsquatcum.com
https://wn.com/Diy_Personal_Lubricant_Natural,_Organic,_Safe,_Slippery
**CAUTION**
Not all essential oils are safe to use internally! Please do your research and ensure that the oil you are picking is SAFE! When/If used internally, essential oils are best paired with a carrier oil. Please use MODEST amounts ONLY!
**DISCLAIMER**
This is a water based lube which is SAFE to use with condoms. However, if you choose to add essential oils, the oil can compromise the integrity of a condom, even if it is just a small amount. If you want to ensure the lube is 100% safe to use with condoms DO NOT add essential oils.
Be safe & enjoy!
SUPPORT EAT SQUAT CUM ON PATREON: https://www.patreon.com/eatsquatcum
Join our mailing list: https://bit.ly/2QgrJ01
https://eatsquatcum.com
- published: 12 Dec 2018
- views: 808079
3:30
DIY Homemade Natural Viagra made Super quick & easy with just 3 Simple Ingredients!
How to make Natural Viagra at home (Works 100%) | Home Remedy for Viagra. Easy and Natural Thai Remedy.
2 Mins Homemade Viagra Recipe with simply 3 Ingredients ...
How to make Natural Viagra at home (Works 100%) | Home Remedy for Viagra. Easy and Natural Thai Remedy.
2 Mins Homemade Viagra Recipe with simply 3 Ingredients can change your life. Tried and Tested Thai remedy for Erectile Dysfunction, Weak Erections and/or Premature Ejaculation. This common problem causes lots of unpleasant situations for couples and lovers during their relations. This drink can help overcome the situation and also good for people who are on Viagra as Medication. This drink can also help you lose weight as Sex burns about as many calories as the same amount of time spent weight training or walking so enjoy this super health and stay fit with pleasure :)
https://wn.com/Diy_Homemade_Natural_Viagra_Made_Super_Quick_Easy_With_Just_3_Simple_Ingredients
How to make Natural Viagra at home (Works 100%) | Home Remedy for Viagra. Easy and Natural Thai Remedy.
2 Mins Homemade Viagra Recipe with simply 3 Ingredients can change your life. Tried and Tested Thai remedy for Erectile Dysfunction, Weak Erections and/or Premature Ejaculation. This common problem causes lots of unpleasant situations for couples and lovers during their relations. This drink can help overcome the situation and also good for people who are on Viagra as Medication. This drink can also help you lose weight as Sex burns about as many calories as the same amount of time spent weight training or walking so enjoy this super health and stay fit with pleasure :)
- published: 04 Dec 2014
- views: 496167
3:18
Watermelon Inspired Water Marble | DIY Nail Art Tutorial | Fruit by the Finger Series
Today I'll be showing you how to do this Watermelon Inspired water marble. Products used are linked below.
See more water marble nail art tutorials: http://go...
Today I'll be showing you how to do this Watermelon Inspired water marble. Products used are linked below.
See more water marble nail art tutorials: http://goo.gl/DPpKba
Subscribe for new videos every week: http://goo.gl/JJaoHC
What do you think, should I have added seeds? I tested a few options before I took this off, and you can check them out here:: http://youtu.be/WbZFRiFS8zg
Want to see the testing phase of different colors for this water marble?: http://youtu.be/aRVbHVc_S3Q
►Nail polish and products used◄
-Base coat (of your choice)
-Essie - Pretty Edgy
-Essie - Going Incognito: http://amzn.to/1U9Jd98
-Orly - White Tips: http://amzn.to/1KbeK7h
-Nails Inc - Lower Regent Street: http://amzn.to/1khBbxF
-Seche Vite Fast Dry Top Coat: http://amzn.to/1K9HQUE
-5 oz paper cup: http://amzn.to/1MFYfk5
-Room temperature filtered water
-Orange stick: http://amzn.to/1U20nmV (or your choice of sharp tool)
-(Optional) Simply Peel: http://amzn.to/1JWCNsM or Liquid Latex: http://amzn.to/1JsI9JL or Tape: http://amzn.to/1MFXQyc
-Cleanup brush: http://amzn.to/1P0lvH9
-Clean up with acetone: http://amzn.to/1TlzxtI
►Step-by-Step◄
-Start out with a clean, dry nail and apply a base coat
-Use White Tips as your base color
-(Optional) Prep around your nails with tape or liquid latex
-Create a bullseye with four colors
-Draw in the design with the tip of your tool
-Dip you nail(s) into the design
-Clean the top of the water
-Slowly pull your nail out
-Remove protection if used and clean up around the edges
-Finish with a top coat!
►Fruit by the Finger Series◄
http://www.youtube.com/playlist?list=PLY28sm_5aJA6wdXUtG6UUEtVPE1jSlzxu
►Subscribe for new videos every week◄
http://www.youtube.com/subscription_center?add_user=simplelittlepleasues
►Check me out on these sites too!◄
FACEBOOK: http://goo.gl/Z89gjW
INSTAGRAM: http://goo.gl/1jqT8E
TWITTER: https://goo.gl/xYxLKM
PINTEREST: http://goo.gl/PeOOed
BLOG: http://goo.gl/DXTHPo
►Main YouTube Links◄
My Channel: http://goo.gl/Lqr3Fo
Tips & Tricks Playlist: http://goo.gl/X6P7Gr
Water Marble Tutorials Playlist: http://goo.gl/DPpKba
Nail Art Tutorials Playlist: http://goo.gl/zmNZWJ
My Vlog Channel: http://goo.gl/qwOCJo
★Disclaimer: Some links above are affiliate links
https://wn.com/Watermelon_Inspired_Water_Marble_|_Diy_Nail_Art_Tutorial_|_Fruit_By_The_Finger_Series
Today I'll be showing you how to do this Watermelon Inspired water marble. Products used are linked below.
See more water marble nail art tutorials: http://goo.gl/DPpKba
Subscribe for new videos every week: http://goo.gl/JJaoHC
What do you think, should I have added seeds? I tested a few options before I took this off, and you can check them out here:: http://youtu.be/WbZFRiFS8zg
Want to see the testing phase of different colors for this water marble?: http://youtu.be/aRVbHVc_S3Q
►Nail polish and products used◄
-Base coat (of your choice)
-Essie - Pretty Edgy
-Essie - Going Incognito: http://amzn.to/1U9Jd98
-Orly - White Tips: http://amzn.to/1KbeK7h
-Nails Inc - Lower Regent Street: http://amzn.to/1khBbxF
-Seche Vite Fast Dry Top Coat: http://amzn.to/1K9HQUE
-5 oz paper cup: http://amzn.to/1MFYfk5
-Room temperature filtered water
-Orange stick: http://amzn.to/1U20nmV (or your choice of sharp tool)
-(Optional) Simply Peel: http://amzn.to/1JWCNsM or Liquid Latex: http://amzn.to/1JsI9JL or Tape: http://amzn.to/1MFXQyc
-Cleanup brush: http://amzn.to/1P0lvH9
-Clean up with acetone: http://amzn.to/1TlzxtI
►Step-by-Step◄
-Start out with a clean, dry nail and apply a base coat
-Use White Tips as your base color
-(Optional) Prep around your nails with tape or liquid latex
-Create a bullseye with four colors
-Draw in the design with the tip of your tool
-Dip you nail(s) into the design
-Clean the top of the water
-Slowly pull your nail out
-Remove protection if used and clean up around the edges
-Finish with a top coat!
►Fruit by the Finger Series◄
http://www.youtube.com/playlist?list=PLY28sm_5aJA6wdXUtG6UUEtVPE1jSlzxu
►Subscribe for new videos every week◄
http://www.youtube.com/subscription_center?add_user=simplelittlepleasues
►Check me out on these sites too!◄
FACEBOOK: http://goo.gl/Z89gjW
INSTAGRAM: http://goo.gl/1jqT8E
TWITTER: https://goo.gl/xYxLKM
PINTEREST: http://goo.gl/PeOOed
BLOG: http://goo.gl/DXTHPo
►Main YouTube Links◄
My Channel: http://goo.gl/Lqr3Fo
Tips & Tricks Playlist: http://goo.gl/X6P7Gr
Water Marble Tutorials Playlist: http://goo.gl/DPpKba
Nail Art Tutorials Playlist: http://goo.gl/zmNZWJ
My Vlog Channel: http://goo.gl/qwOCJo
★Disclaimer: Some links above are affiliate links
- published: 05 May 2013
- views: 268436
4:56
DIY Liquid detergent
In this video I'm showing you how I made my own zero waste detergent.
In this video I'm showing you how I made my own zero waste detergent.
https://wn.com/Diy_Liquid_Detergent
In this video I'm showing you how I made my own zero waste detergent.
- published: 25 Sep 2016
- views: 62
9:38
Electroplating - Easy DIY Nickel, Copper, Zinc Plating
The recipe for basic electroplating.
1. Vinegar. 2. A dash of salt. 3. A piece of whatever metal you plan to use.
I recommend starting with Nickel.
I don’t kn...
The recipe for basic electroplating.
1. Vinegar. 2. A dash of salt. 3. A piece of whatever metal you plan to use.
I recommend starting with Nickel.
I don’t know what other metals will work or not. Experiment like a mad scientist and find out. Just be careful around chemicals.
I don’t think there is anything particularly nasty about the nickel, copper, or zinc solutions. But I’m not a chemist so use your own judgment. I wear gloves and don’t go out of my way to breath the fumes. There will be a small amount of chlorine gas produced by the salt. Just don’t be a dork and you’ll live through it.
A couple of notes…
Don’t try and plate over zinc plated parts with anything other than zinc. The zinc will destroy the nickel/copper solutions. I mean, don’t let me stop you experimenting, but that’s probably what will happen.
Be careful around stainless steel. It contains chromium. I don’t know what happens when you try this with stainless, but best not to mess with anything that might contain chromium.
For that matter, real chrome plating at home is out of the question unless you have a death wish. Hexavalent
Chromium, which is what’s used for electroplating, is really nasty stuff. A cobalt/nickel mix is a close enough visual match for chrome plating.
When you’re ready to step up to a kit, for New Zealand and Australia, I recommend Jane Kits. For the rest of the world, google Caswell Plating.
https://www.patreon.com/geoffreycroker
http://www.instagram.com/geoffreycroker
flickgeoffanemail@gmail.com
https://wn.com/Electroplating_Easy_Diy_Nickel,_Copper,_Zinc_Plating
The recipe for basic electroplating.
1. Vinegar. 2. A dash of salt. 3. A piece of whatever metal you plan to use.
I recommend starting with Nickel.
I don’t know what other metals will work or not. Experiment like a mad scientist and find out. Just be careful around chemicals.
I don’t think there is anything particularly nasty about the nickel, copper, or zinc solutions. But I’m not a chemist so use your own judgment. I wear gloves and don’t go out of my way to breath the fumes. There will be a small amount of chlorine gas produced by the salt. Just don’t be a dork and you’ll live through it.
A couple of notes…
Don’t try and plate over zinc plated parts with anything other than zinc. The zinc will destroy the nickel/copper solutions. I mean, don’t let me stop you experimenting, but that’s probably what will happen.
Be careful around stainless steel. It contains chromium. I don’t know what happens when you try this with stainless, but best not to mess with anything that might contain chromium.
For that matter, real chrome plating at home is out of the question unless you have a death wish. Hexavalent
Chromium, which is what’s used for electroplating, is really nasty stuff. A cobalt/nickel mix is a close enough visual match for chrome plating.
When you’re ready to step up to a kit, for New Zealand and Australia, I recommend Jane Kits. For the rest of the world, google Caswell Plating.
https://www.patreon.com/geoffreycroker
http://www.instagram.com/geoffreycroker
flickgeoffanemail@gmail.com
- published: 27 Sep 2018
- views: 3805007
16:25
Make Cottage Cheese Two Ways With Taste Off!
Like many things in the culinary world you can make Cottage Cheese at home using two different methods or recipes. In both cases the process involves acidifying...
Like many things in the culinary world you can make Cottage Cheese at home using two different methods or recipes. In both cases the process involves acidifying the milk (either with bacteria and enzymes, or with straight acid) which curdles the milk.
How To Make Traditional ‘Old School’ Cottage Cheese:
The traditional process involves using ‘good’ mesophilic bacteria that convert lactose into lactic acid and rennet (an enzyme) that coagulate the milk into a solid block of curd.
This block of curd is then cut into cubes, and the whey is released.
Ingredients:
4L (1 gallon) whole 3.25% milk
125 mL (½ cup) live culture kefir - or 1 packet Mesophilic Starter Culture
8-10 drops liquid rennet
Method:
Slowly heat the milk in a heavy pot to 30ºC (86ºF).
Add the kefir and stir in well.
Mix the rennet into a ¼ cup of room temperature water, and then stir this into the milk.
Turn off the heat, cover and let sit undisturbed for 3-6 hours.
During this rest time try to keep the temp of the milk between 70ºF - 80ºF.
You will know when to move on to the next step - the milk will be solid, and will shrink away from the sides of the pot slightly.
Cut the curds - as I show in the video.
Slowly increase the temperature of the curds / whey to 45ºC-46°C (113ºF-115°F) and keep it a that temp for 30-45 minutes.
Drain the curds through a cheesecloth lined colander or sieve.
Squeeze out as much whey as possible, and then rinse thoroughly under cold water to remove any remaining whey.
Allow the curds to drain well, and dry out slightly.
You can salt the curds and mix with a little heavy cream before serving, or eat / use as is.
How To Make ‘Quick’ Cottage Cheese.
Ingredients:
4L (1 gallon) whole 3.25% milk
175 mL (3/4 cup) white vinegar
Method:
Heat the milk in a heavy pot to 50ºC (120ºF).
Stir in the vinegar, and turn off the heat.
Continue stirring for 1-2 minutes while the curd forms.
Cover and allow to sit undisturbed for 20-30 minutes.
Drain the curds through a cheesecloth lined colander or sieve.
Squeeze out as much whey as possible, and then rinse thoroughly under cold water to remove any remaining whey**.
Allow the curds to drain well, and dry out slightly.
You can salt the curds and mix with a little heavy cream before serving, or eat / use as is.
**You can now use this whey to make ricotta!
Le Gourmet TV Is Now - Glen & Friends Cooking!
#LeGourmetTV #GlenAndFriendsCooking
https://wn.com/Make_Cottage_Cheese_Two_Ways_With_Taste_Off
Like many things in the culinary world you can make Cottage Cheese at home using two different methods or recipes. In both cases the process involves acidifying the milk (either with bacteria and enzymes, or with straight acid) which curdles the milk.
How To Make Traditional ‘Old School’ Cottage Cheese:
The traditional process involves using ‘good’ mesophilic bacteria that convert lactose into lactic acid and rennet (an enzyme) that coagulate the milk into a solid block of curd.
This block of curd is then cut into cubes, and the whey is released.
Ingredients:
4L (1 gallon) whole 3.25% milk
125 mL (½ cup) live culture kefir - or 1 packet Mesophilic Starter Culture
8-10 drops liquid rennet
Method:
Slowly heat the milk in a heavy pot to 30ºC (86ºF).
Add the kefir and stir in well.
Mix the rennet into a ¼ cup of room temperature water, and then stir this into the milk.
Turn off the heat, cover and let sit undisturbed for 3-6 hours.
During this rest time try to keep the temp of the milk between 70ºF - 80ºF.
You will know when to move on to the next step - the milk will be solid, and will shrink away from the sides of the pot slightly.
Cut the curds - as I show in the video.
Slowly increase the temperature of the curds / whey to 45ºC-46°C (113ºF-115°F) and keep it a that temp for 30-45 minutes.
Drain the curds through a cheesecloth lined colander or sieve.
Squeeze out as much whey as possible, and then rinse thoroughly under cold water to remove any remaining whey.
Allow the curds to drain well, and dry out slightly.
You can salt the curds and mix with a little heavy cream before serving, or eat / use as is.
How To Make ‘Quick’ Cottage Cheese.
Ingredients:
4L (1 gallon) whole 3.25% milk
175 mL (3/4 cup) white vinegar
Method:
Heat the milk in a heavy pot to 50ºC (120ºF).
Stir in the vinegar, and turn off the heat.
Continue stirring for 1-2 minutes while the curd forms.
Cover and allow to sit undisturbed for 20-30 minutes.
Drain the curds through a cheesecloth lined colander or sieve.
Squeeze out as much whey as possible, and then rinse thoroughly under cold water to remove any remaining whey**.
Allow the curds to drain well, and dry out slightly.
You can salt the curds and mix with a little heavy cream before serving, or eat / use as is.
**You can now use this whey to make ricotta!
Le Gourmet TV Is Now - Glen & Friends Cooking!
#LeGourmetTV #GlenAndFriendsCooking
- published: 28 Mar 2019
- views: 309651