- published: 14 May 2010
- views: 1390775
A serpentine belt, also known as a multi-vee, poly-v, or multi-rib belt, is a single, continuous belt used to drive multiple peripheral devices in an automotive engine, such as an alternator, power steering pump, water pump, air conditioning compressor, air pump, etc. The belt may also be guided by an idler pulley and/or a belt tensioner (which may be spring-loaded, hydraulic, or manual). The production serpentine belt was manufactured by Hutchinson and first used by Mercedes-Benz on the 1985 190 Series.
On some engine designs, the "back" (smooth side) of the belt may drive some accessories. This is typically limited to components requiring less torque or where a large angle of lap is present. Such accessories will counter-rotate vs. the "normal" pulleys. Some vehicles use two serpentine belts for their system, such as the manual transaxle equipped Ford Taurus SHO, 1995–1999 DOHC Nissan Maxima, vehicles using the supercharged GM 3800 engine, and many BMWs.
It is more efficient than the older multiple belt system and may consume less space in the engine compartment. By using a single, wider belt instead of multiple, thinner belts, the belt may be put under increased tension without stretching. Higher tension reduces slip, which increases belt life and mechanical efficiency. Reduced slip can allow the use of lower-ratio pulleys; this reduces the load on the engine, increasing fuel economy and available power. The tendency for V-belts to "flip over" in the pulley groove (at high RPM) is eliminated. A serpentine belt is also much easier to maintain and replace, since there is no need to remove multiple belts in order to replace one of them. Also since only one movable belt tensioner is required all of the peripheral components (alternator, A/C compressor, etc.) can simply be mounted to the engine without the need to swivel.
How To Replace a Serpentine Belt - EricTheCarGuy
Dayco - Diagnosing Serpentine Belt Noise
HOW TO REPLACE A SERPENTINE BELT!
How To Replace a Serpentine Belt
How To Change your Serpentine Belt
Diagnosing Belt Noise squeak or squeal on a Serpentine Belt
How to Fix a Squeaky Belt (figure out where the squeak is coming from)
How To Install Replace Serpentine Belt Ford Taurus 3.0L V6 1AAuto.com
2003-2012 Honda Accord serpentine belt replacement
Quiet a Squeaky engine serpentine belt by cleaning, from 1A Auto
Ford 4.6L 5.4L V8 Engines Serpentine Belt Replacement
Honda Odyssey serpentine belt tensioner replacement
Replacing Toyota Corolla/Matrix Serpentine Belt Tutorial
How to Replace a Serpentine Belt - Honda/Acura