- published: 12 Jun 2015
- views: 583
In the field of optics, transparency (also called pellucidity or diaphaneity) is the physical property of allowing light to pass through the material without being scattered. On a macroscopic scale (one where the dimensions investigated are much, much larger than the wavelength of the photons in question), the photons can be said to follow Snell's Law. Translucency (also called translucence or translucidity) is a super-set of transparency: it allows light to pass through, but does not necessarily (again, on the macroscopic scale) follow Snell's law; the photons can be scattered at either of the two interfaces where there is a change in index of refraction, or internally. In other words, a translucent medium allows the transport of light while a transparent medium not only allows the transport of light but allows for image formation. The opposite property of translucency is opacity. Transparent materials appear clear, with the overall appearance of one color, or any combination leading up to a brilliant spectrum of every color.
Optics is the branch of physics which involves the behaviour and properties of light, including its interactions with matter and the construction of instruments that use or detect it. Optics usually describes the behaviour of visible, ultraviolet, and infrared light. Because light is an electromagnetic wave, other forms of electromagnetic radiation such as X-rays, microwaves, and radio waves exhibit similar properties.
Most optical phenomena can be accounted for using the classical electromagnetic description of light. Complete electromagnetic descriptions of light are, however, often difficult to apply in practice. Practical optics is usually done using simplified models. The most common of these, geometric optics, treats light as a collection of rays that travel in straight lines and bend when they pass through or reflect from surfaces. Physical optics is a more comprehensive model of light, which includes wave effects such as diffraction and interference that cannot be accounted for in geometric optics. Historically, the ray-based model of light was developed first, followed by the wave model of light. Progress in electromagnetic theory in the 19th century led to the discovery that light waves were in fact electromagnetic radiation.
Transparency, transparence or transparent most often refer to Transparency and translucency, the physical property of allowing the transmission of light through a material.
They may also refer to:
An optical illusion (also called a visual illusion) is characterized by visually perceived images that differ from objective reality. The information gathered by the eye is processed in the brain to give a perception that does not tally with a physical measurement of the stimulus source. There are three main types: literal optical illusions that create images that are different from the objects that make them, physiological illusions that are the effects of excessive stimulation of a specific type (brightness, colour, size, position, tilt, movement), and cognitive illusions, the result of unconscious inferences. Pathological visual illusions arise from a pathological exaggeration in physiological visual perception mechanisms causing the aforementioned types of illusions.
Optical illusions are often classified into categories including the physical and the cognitive or perceptual, and contrasted with optical hallucinations. Because
Physiological illusions, such as the afterimages following bright lights, or adapting stimuli of excessively longer alternating patterns (contingent perceptual aftereffect), are presumed to be the effects on the eyes or brain of excessive stimulation or interaction with contextual or competing stimuli of a specific type—brightness, color, position, tile, size, movement, etc. The theory is that a stimulus follows its individual dedicated neural path in the early stages of visual processing, and that intense or repetitive activity in that or interaction with active adjoining channels cause a physiological imbalance that alters perception.
The optical transparency of Plexiglas (R) or poly(methy methacrylate))
Amazing Animated Optical Illusions - Do it yourself
Electromagnetically Induced Transparency - Susanne Yelin
Advanced Transparency Methods - Interactive 3D Graphics
Amazing Animated Optical Illusions!
Cost Optics - Total Cost Transparency
Why Are Some Things Transparent?
Opacity (optics)
Invisibility Breakthrough for Japanese Researchers
Module 1-Materials Functionalities: Transparency
In this video I discuss some of the requirements for optical transparency (to visible light) using Plexiglas as an example.
I created the song in the video. You can download it from iTunes or Amazon Song Name: To Zero http://adf.ly/CkezZ The final animation is sort of an encore of 2 previous popular animations. There was pacman and there was the gun. So I combined them. Pacman eating the bullets from the gun. Below are links to the images found in this video so you can print them out and try it yourself. You'll have to print the template onto a transparency. If you have an ink jet printer you have to use a special transparency made specifically for ink jet printers. When you print the images and the template make sure to print them all at the same size if any of the sizes change the effect will not work. http://adf.ly/Ckf3s http://adf.ly/Ckf5N http://adf.ly/Ckf7U http://adf.ly/Ckf93 http://adf.ly/CkfAq http://a...
This video is part of an online course, Interactive 3D Graphics. Check out the course here: https://www.udacity.com/course/cs291.
optical illusions This is the Amazing Animated Optical Illusion! Below are links to the images found in this video so you can print them out and try it your self. You'll have to print the template onto a transparency. If you have an ink jet printer you have to use a special transparency made specifically for ink jet printers. When you print the images and the template make sure to print them all at the same size if any of the sizes change the effect will not work. Template: http://i.imgur.com/8Kq8Wlp.jpg Image 1: http://i.imgur.com/aV2BNeU.jpg Image 2: http://i.imgur.com/NyKjc83.jpg Image 3: http://i.imgur.com/MXJchLj.jpg Image 4: http://i.imgur.com/b2Ffg4f.jpg Image 5: http://i.imgur.com/z4dOj7r.jpg Image 6: http://i.imgur.com/uuSOjV9.jpg DAJORIVISION; History is written by those that...
Cost Optics is a successful Hong Kong based company that creates products, tools and services to manage and control Market Data, Research, IT Infrastructure and Brokerage expense line items. These high value expenses are typically managed by IT staff using substandard install-based products leading to poor expense management, incorrect cost allocations and inaccurate financial reporting. Cost Optics takes a unique, process-based approach which manages our clients' high value expense line items via a service desk manned by qualified accountants. Cost Optics provides an outcome based service, rather than simply outsourcing a function. This is known as Outcome Based Outsourcing (OPO) where the outcome is based on meeting service level agreements, deliveries or deadlines, sharing cost reduct...
It's kinda weird that glass is transparent for ALL visible wavelengths of light. This video explains how that's possible without being inconsistent with other concepts. There is a lot of B.S. about this out there on the internet, so beware! ________________________________ VIDEO ANNOTATIONS All Optics is Scattering: http://youtu.be/mv_90PC5XKw What EXACTLY is Temperature? http://youtu.be/2xaIQjmE5VI Movie Science: Doing the Kessel Run in 12 Parsecs http://youtu.be/-AyCNNcN3bM Basic FAQs about Black Holes: http://youtu.be/ACCeFVeT984 ________________________________ SCIENCE ASYLUM STUFF Support us on Patreon: http://www.patreon.com/ScienceAsylum Advanced Theoretical Physics (eBook): https://gumroad.com/l/ubSc Merchandise: http://scienceasylum.spreadshirt.com/ More videos at: http://...
Opacity is the measure of impenetrability to electromagnetic or other kinds of radiation, especially visible light. In radiative transfer, it describes the absorption and scattering of radiation in a medium, such as a plasma, dielectric, shielding material, glass, etc. An opaque object is neither transparent (allowing all light to pass through) nor translucent (allowing some light to pass through). When light strikes an interface between two substances, in general some may be reflected, some absorbed, some scattered, and the rest transmitted (also see refraction). Reflection can be diffuse, for example light reflecting off a white wall, or specular, for example light reflecting off a mirror. An opaque substance transmits no light, and therefore reflects, scatters, or absorbs all of it. Bot...
Researchers in Japan have invented an incredible invisibility cloak. The technology comes from 2003, but it's developers say the Harry Potter-like invisibility cloak is just the beginning. The team, led by Dr. Susumu Tachi, from Keio University, is now adapting their findings to help pilots, drivers, doctors and others. Retro-reflective projection technology uses a computer, a video camera and projector to shine background images onto the front of a subject wearing specialised clothing, creating the illusion of invisibility. What makes the technology unique is a fabric made of glass beads only 50 microns wide, which can reflect light directly back at the source, much like the screen in a cinema. Viewed from near the light source, the projection is bright even in broad dayligh...
Speaker: Dra. Marta de la Fuente (INDRA S.A.) Abstract: Any material intended to be used in a refractive optical system must be transparent for the wavelengths of interest. Otherwise it is useless for obvious reason. Optical wavebands are well defi ned according to atmospheric transmission and detectors state of the art. However, transparency is not the only requirement that affects optical performance. Characteristics such as refractive index and its variation with temperature, homogeneity and scattering need to be considered as well. They have important effects on transparency and wavefront quality. A brief review of relevant parameters for transparent optical materials is shown.
In this video I discuss some of the requirements for optical transparency (to visible light) using Plexiglas as an example.
I created the song in the video. You can download it from iTunes or Amazon Song Name: To Zero http://adf.ly/CkezZ The final animation is sort of an encore of 2 previous popular animations. There was pacman and there was the gun. So I combined them. Pacman eating the bullets from the gun. Below are links to the images found in this video so you can print them out and try it yourself. You'll have to print the template onto a transparency. If you have an ink jet printer you have to use a special transparency made specifically for ink jet printers. When you print the images and the template make sure to print them all at the same size if any of the sizes change the effect will not work. http://adf.ly/Ckf3s http://adf.ly/Ckf5N http://adf.ly/Ckf7U http://adf.ly/Ckf93 http://adf.ly/CkfAq http://a...
This video is part of an online course, Interactive 3D Graphics. Check out the course here: https://www.udacity.com/course/cs291.
optical illusions This is the Amazing Animated Optical Illusion! Below are links to the images found in this video so you can print them out and try it your self. You'll have to print the template onto a transparency. If you have an ink jet printer you have to use a special transparency made specifically for ink jet printers. When you print the images and the template make sure to print them all at the same size if any of the sizes change the effect will not work. Template: http://i.imgur.com/8Kq8Wlp.jpg Image 1: http://i.imgur.com/aV2BNeU.jpg Image 2: http://i.imgur.com/NyKjc83.jpg Image 3: http://i.imgur.com/MXJchLj.jpg Image 4: http://i.imgur.com/b2Ffg4f.jpg Image 5: http://i.imgur.com/z4dOj7r.jpg Image 6: http://i.imgur.com/uuSOjV9.jpg DAJORIVISION; History is written by those that...
Cost Optics is a successful Hong Kong based company that creates products, tools and services to manage and control Market Data, Research, IT Infrastructure and Brokerage expense line items. These high value expenses are typically managed by IT staff using substandard install-based products leading to poor expense management, incorrect cost allocations and inaccurate financial reporting. Cost Optics takes a unique, process-based approach which manages our clients' high value expense line items via a service desk manned by qualified accountants. Cost Optics provides an outcome based service, rather than simply outsourcing a function. This is known as Outcome Based Outsourcing (OPO) where the outcome is based on meeting service level agreements, deliveries or deadlines, sharing cost reduct...
It's kinda weird that glass is transparent for ALL visible wavelengths of light. This video explains how that's possible without being inconsistent with other concepts. There is a lot of B.S. about this out there on the internet, so beware! ________________________________ VIDEO ANNOTATIONS All Optics is Scattering: http://youtu.be/mv_90PC5XKw What EXACTLY is Temperature? http://youtu.be/2xaIQjmE5VI Movie Science: Doing the Kessel Run in 12 Parsecs http://youtu.be/-AyCNNcN3bM Basic FAQs about Black Holes: http://youtu.be/ACCeFVeT984 ________________________________ SCIENCE ASYLUM STUFF Support us on Patreon: http://www.patreon.com/ScienceAsylum Advanced Theoretical Physics (eBook): https://gumroad.com/l/ubSc Merchandise: http://scienceasylum.spreadshirt.com/ More videos at: http://...
Opacity is the measure of impenetrability to electromagnetic or other kinds of radiation, especially visible light. In radiative transfer, it describes the absorption and scattering of radiation in a medium, such as a plasma, dielectric, shielding material, glass, etc. An opaque object is neither transparent (allowing all light to pass through) nor translucent (allowing some light to pass through). When light strikes an interface between two substances, in general some may be reflected, some absorbed, some scattered, and the rest transmitted (also see refraction). Reflection can be diffuse, for example light reflecting off a white wall, or specular, for example light reflecting off a mirror. An opaque substance transmits no light, and therefore reflects, scatters, or absorbs all of it. Bot...
Researchers in Japan have invented an incredible invisibility cloak. The technology comes from 2003, but it's developers say the Harry Potter-like invisibility cloak is just the beginning. The team, led by Dr. Susumu Tachi, from Keio University, is now adapting their findings to help pilots, drivers, doctors and others. Retro-reflective projection technology uses a computer, a video camera and projector to shine background images onto the front of a subject wearing specialised clothing, creating the illusion of invisibility. What makes the technology unique is a fabric made of glass beads only 50 microns wide, which can reflect light directly back at the source, much like the screen in a cinema. Viewed from near the light source, the projection is bright even in broad dayligh...
Speaker: Dra. Marta de la Fuente (INDRA S.A.) Abstract: Any material intended to be used in a refractive optical system must be transparent for the wavelengths of interest. Otherwise it is useless for obvious reason. Optical wavebands are well defi ned according to atmospheric transmission and detectors state of the art. However, transparency is not the only requirement that affects optical performance. Characteristics such as refractive index and its variation with temperature, homogeneity and scattering need to be considered as well. They have important effects on transparency and wavefront quality. A brief review of relevant parameters for transparent optical materials is shown.
Easy Steps show you, how to Fix/Repair Broken Phone - Samsung Galaxy S4 yourself. I will show you, how to disassemble the phone and replace front broken glass. Video of taking out broken front glass and replacing with new glass. Original UV LOCA unit 5ml - Liquid Optical Clear Adhesive (LOCA) Glue Adhesive Transparent TP-N1000 Suitable for all Smartphone display Repair for Iphone Samsung Motorola HTC LG Sony Nokia Xiaomi - LINK: http://amzn.to/2cuwb82 Silvercell 5ML UV Glue LOCA Liquid Optical Clear Adhesive For Cellphone Glass Lens Repair - LINK: http://amzn.to/2cdmHQq CrazyFire® Black Front Outer Glass Lens Screen Replacement For Samsung Galaxy S4 SIV I9500 L720 I545 I337 M919 R970+Tools Kit+Adhesive Tape - LINK: http://amzn.to/2cdlB7d WONFAST® 36 Watt Professional Portable UV Lamp ...
Unboxing And Installing IQ Shield Full Body Screen Protector (Case Friendly) For iPhone 7 Plus Contours The Surface Of Your Device Film Is Optically Transparent No Yellowing Has Self-Healing Properties Strong Adhesion Removes Cleanly Without Residue
In this webinar we demonstrate how to measure transparent film thickness and surface/subsurface topography. These measurements allow fast, non-contact characterization of films such as photoresists, oxide layers, and protective coatings. The underlying theory will be explained, as well as guidelines for optimizing measurements and processing the collected data. Requires the optional “Films” package for Vision64.
Space debris, junk, waste, trash, or litter is the collection of defunct man-made objects in space – old satellites, spent rocket stages, and fragments from disintegration, erosion, and collisions – including those caused by debris itself. As of July 2013, more than 170 million debris smaller than 1 cm (0.4 in), about 670,000 debris 1–10 cm, and around 29,000 larger debris are in orbit.[1] As of 2009, 19,000 debris over 5 cm (2 in) are tracked.[2] Below 2000 km debris are denser than meteoroids; mostly dust from solid rocket motors, surface erosion debris like paint flakes, and frozen coolant from RORSAT nuclear-powered satellites. They cause damage akin to sandblasting, especially to solar panels and optics like telescopes or star trackers that can not be covered with a ballistic Whipple ...
In this video you will see how to solve Problem on Hexagonal prism Hexagonal Prism In geometry, the hexagonal prism is a prism with hexagonal base. This polyhedron has 8 faces, 18 edges, and 12 vertices. Since it has eight faces, it is an octahedron. However, the term octahedron is primarily used to refer to the regular octahedron, which has eight triangular faces. Because of the ambiguity of the term octahedron and the dissimilarity of the various eight-sided figures, the term is rarely used without clarification. If faces are all regular, the hexagonal prism is a semiregular polyhedron, more generally, a uniform polyhedron, and the fourth in an infinite set of prisms formed by square sides and two regular polygon caps. It can be seen as a truncated hexagonal hosohedron, represented by ...
If you have a question for me, post it in the comments below. I'll answer as many as I can in the next episode. Here are links to each question answered in this video: 00:36 — Do you think painting loosely surrounding the focal point is a learned attribute, and should a painter seeking to be better at realism first learn to paint without this abstraction? 03:44 — Which solvent would you recommend to rework an area that is dry without damaging the canvas? 04:47 — Some colors, like Winsor & Newton's Terre Verte don't hold their body when medium is added and become too transparent. What are your thoughts on this issue? 05:44 — You teach drawing using a proportional divider, but other methods includes the use of grids, projectors, and optical devices like a camera obscura. What are your t...
Please support my content creation by using my Amazon Store: http://astore.amazon.com/m0711-20 Or anything on Amazon: http://www.amazon.com/?_encoding=UTF8&camp;=212353&creative;=380557&linkCode;=sb1&tag;=m0711-20 ------------------------------ Click "Show more" ------------------------------------------- This is a review of the Therm-App TH thermal camera / imager for Android phones. I test / demonstrate the following: * Camera field of view / FOV * Camera resolution * Camera sensitivity / NETD * Temperature measurement accuracy * Distance to spot ratio * Camera speed capturing moving thermal targets * IRT Cronista thermal image analysis software Buy one here: http://astore.amazon.com/m0711-20/detail/B00O7HUJSK Other cameras used in this review: * Fluke Ti90 * HT Instruments THT45 * FLIR...
In this video you will see how to solve Problem on Pentagonal Prism Pentagonal Prism In geometry, the pentagonal prism a prism with a pentagonal base. It is a type of heptahedron with 7 faces, 15 edges, and 10 vertices. If faces are all regular, the pentagonal prism is a semiregular polyhedron, more generally, a uniform polyhedron, and the third in an infinite set of prisms formed by square sides and two regular polygon caps. It can be seen as a truncated pentagonal hosohedron, represented by Schläfli symbol t{2,5}. Alternately it can be seen as the Cartesian product of a regular pentagon and a line segment, and represented by the product {5}x{}. The dual of a pentagonal prism is a pentagonal bipyramid. Prism In optics, a prism is a transparent optical element with flat, polished surfa...
In this video you will see how to solve Problem on Hexagonal prism Hexagonal Prism In geometry, the hexagonal prism is a prism with hexagonal base. This polyhedron has 8 faces, 18 edges, and 12 vertices. Since it has eight faces, it is an octahedron. However, the term octahedron is primarily used to refer to the regular octahedron, which has eight triangular faces. Because of the ambiguity of the term octahedron and the dissimilarity of the various eight-sided figures, the term is rarely used without clarification. If faces are all regular, the hexagonal prism is a semiregular polyhedron, more generally, a uniform polyhedron, and the fourth in an infinite set of prisms formed by square sides and two regular polygon caps. It can be seen as a truncated hexagonal hosohedron, represented by ...