- published: 28 May 2013
- views: 210461
A sound reinforcement system is the combination of microphones, signal processors, amplifiers, and loudspeakers that makes live or pre-recorded sounds louder and may also distribute those sounds to a larger or more distant audience. In some situations, a sound reinforcement system is also used to enhance or alter the sound of the sources on the stage, typically by using electronic effects, as opposed to simply amplifying the sources unaltered.
A sound reinforcement system for a rock concert in a stadium may be very complex, including hundreds of microphones, complex audio mixing and signal processing systems, tens of thousands of watts of amplifier power, and multiple loudspeaker arrays, all overseen by a team of audio engineers and technicians. On the other hand, a sound reinforcement system can be as simple as a small public address (PA) system, consisting of, for example, a single microphone connected to an amplified loudspeaker for a singer-guitarist playing in a coffeehouse. In both cases, these systems reinforce sound to make it louder or distribute it to a wider audience.
In physics, sound is a vibration that propagates as a typically audible mechanical wave of pressure and displacement, through a medium such as air or water. In physiology and psychology, sound is the reception of such waves and their perception by the brain.
Acoustics is the interdisciplinary science that deals with the study of mechanical waves in gases, liquids, and solids including vibration, sound, ultrasound, and infrasound. A scientist who works in the field of acoustics is an acoustician, while someone working in the field of acoustical engineering may be called an acoustical engineer. An audio engineer, on the other hand is concerned with the recording, manipulation, mixing, and reproduction of sound.
Applications of acoustics are found in almost all aspects of modern society, subdisciplines include aeroacoustics, audio signal processing, architectural acoustics, bioacoustics, electro-acoustics, environmental noise, musical acoustics, noise control, psychoacoustics, speech, ultrasound, underwater acoustics, and vibration.
A presentation that I put together recently for a group of university students in Singapore. We normally don't go into this type of detail when training new sound engineers but I made an exception for this class :) The structure of this presentation is based largely on a pair of excellent articles written by Andy Coules for prosoundweb.com - links to these articles can be found below. Hope you enjoy this little look into where our industry came from. Voice over recorded with a Shure SM86. Support GLB Productions: https://www.patreon.com/glbproductions?ty=h References: Ball, P., 2007. Why the Greeks could hear plays from the back row. [Online] Available at: http://www.nature.com/news/2007/070319/full/news070319-16.html [Accessed 5th Sept 2015]. Coules, A., 2014. The History Of PA...
http://LiveSound101.com - Welcome to the fifth video in my Live Sound 101 video series. In this video I'll talk about sound reinforcements systems (aka live sound systems). All live sound systems no matter how big or small all share a few basic characteristics. Just in case you had some lingering questions after viewing the previous video, a simple signal flow diagram will help you visualize the major components of a sound reinforcement system and show you what is happening to the audio signal along the way. 00:01 Topics covered in this video and series 01:30 Quick recap 02:40 Many types of sound systems exist 03:28 Basic sound reinforcement signal flow diagram 03:47 Input transducer 03:57 Signal processing 04:04 Output transducer 04:39 Why is it important to recognize signal types? 0...
This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. This course is designed to teach the fundamentals of audio, acoustics and sound reinforcement. Learn more at qscaudio.com: http://www.qscaudio.com/products/software/understanding_SR/
MSW engineer Rob Moore discusses how a room’s overall sound is determined by its size and shape, the qualities of its reflective surfaces, and other factors. Related issues such as speaker placement and master EQ adjustments (made to accommodate for the sound qualities of a space) are also addressed. [Video #1 of 6 in the 2015 Sound Reinforcement Tutorial Series] Learn more at: http://www.musicservingtheword.org
20,000 Watt stereo sound reinforcement system for an outdoor event held in Oakbrook Terrace, IL on Friday, August 3, 2012. System includes: (4x) Crown i-Tech 5000HD power amps, (8x) JBL SRX718S subwoofers, (4x) JBL SRX722 high power speakers. Entire system is powered by two (2) Honda EU2000i "super quiet" generators. Please visit our Website for details of our complete line of sound reinforcement systems: http://www.northshoreproductionsinc.com/DJ_Sound_System_Rental/page_2339782.html
This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. Two-channel sound-reinforcement power amplifiers can typically be operated in one of three modes: stereo, parallel and bridge. What do these modes mean .
Dave Rat describes how to EQ a live sound system and describes a simple method of achieving consist sound. What to EQ with the channel strips? What do you eq with the system graph?
http://LiveSound101.com - Welcome to the first video in my Live Sound 101 video series. This is a great place to start if you're new to live sound. 00:25 How people end up in live sound 01:11 Topics covered in this video series 02:50 Live sound people should be musicians 03:45 Work on your listening skills 04:30 Allow me to introduce myself 07:31 Recommended live sound reading JOIN THE COMMUNITY Community: http://bit.ly/LiveSound101 AVST Podcast: http://AVShopTalk.com Recommended Reading: The Art of Recording - http://amzn.to/TsexTT Acoustics & Psychoacoustics - http://amzn.to/WNmvH9 Assistant Engineers Handbook - http://amzn.to/WeL2Up Audio in Media - http://amzn.to/VvPZpK Sound Reinforcement - http://amzn.to/X4suFR The Microphone Book - http://amzn.to/UfBvzr EDIT 11/20/15: This 8 vi...
What is audio engineering? Find out in this introductory tutorial, as seasoned engineer Brent Carpenter provides an overview of the process. Watch more at http://www.lynda.com/Audio-Audio-Engineering-tutorials/Live-Sound-Engineering-Techniques-Tour-Rush/142975-2.html?utm_campaign=M0kqIzSlUMo&utm;_medium=viral&utm;_source=youtube. This tutorial is a single movie from the course Live Sound Engineering Techniques: On Tour with Rush, on lynda.com. The complete course, which is 1 hour and 18 minutes long, follows top-tier live sound engineer Brent Carpenter around the setup for a Rush concert in a 12,000-seat arena show in Denver, Colorado. Introduction 1. Setting Up the Sound System 2. The Onstage Monitor Mix 3. The Clockwork Angels Stage Tour 4. Front-of-House Sound 5. When the Band Hits the ...
A presentation that I put together recently for a group of university students in Singapore. We normally don't go into this type of detail when training new sound engineers but I made an exception for this class :) The structure of this presentation is based largely on a pair of excellent articles written by Andy Coules for prosoundweb.com - links to these articles can be found below. Hope you enjoy this little look into where our industry came from. Voice over recorded with a Shure SM86. Support GLB Productions: https://www.patreon.com/glbproductions?ty=h References: Ball, P., 2007. Why the Greeks could hear plays from the back row. [Online] Available at: http://www.nature.com/news/2007/070319/full/news070319-16.html [Accessed 5th Sept 2015]. Coules, A., 2014. The History Of PA...
http://LiveSound101.com - Welcome to the fifth video in my Live Sound 101 video series. In this video I'll talk about sound reinforcements systems (aka live sound systems). All live sound systems no matter how big or small all share a few basic characteristics. Just in case you had some lingering questions after viewing the previous video, a simple signal flow diagram will help you visualize the major components of a sound reinforcement system and show you what is happening to the audio signal along the way. 00:01 Topics covered in this video and series 01:30 Quick recap 02:40 Many types of sound systems exist 03:28 Basic sound reinforcement signal flow diagram 03:47 Input transducer 03:57 Signal processing 04:04 Output transducer 04:39 Why is it important to recognize signal types? 0...
This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. This course is designed to teach the fundamentals of audio, acoustics and sound reinforcement. Learn more at qscaudio.com: http://www.qscaudio.com/products/software/understanding_SR/
MSW engineer Rob Moore discusses how a room’s overall sound is determined by its size and shape, the qualities of its reflective surfaces, and other factors. Related issues such as speaker placement and master EQ adjustments (made to accommodate for the sound qualities of a space) are also addressed. [Video #1 of 6 in the 2015 Sound Reinforcement Tutorial Series] Learn more at: http://www.musicservingtheword.org
20,000 Watt stereo sound reinforcement system for an outdoor event held in Oakbrook Terrace, IL on Friday, August 3, 2012. System includes: (4x) Crown i-Tech 5000HD power amps, (8x) JBL SRX718S subwoofers, (4x) JBL SRX722 high power speakers. Entire system is powered by two (2) Honda EU2000i "super quiet" generators. Please visit our Website for details of our complete line of sound reinforcement systems: http://www.northshoreproductionsinc.com/DJ_Sound_System_Rental/page_2339782.html
This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. This chapter on power amplifiers is one of the many topics covered in QSC Audio's Understanding Sound Reinforcement, The Learner's Guide training course. Two-channel sound-reinforcement power amplifiers can typically be operated in one of three modes: stereo, parallel and bridge. What do these modes mean .
Dave Rat describes how to EQ a live sound system and describes a simple method of achieving consist sound. What to EQ with the channel strips? What do you eq with the system graph?
http://LiveSound101.com - Welcome to the first video in my Live Sound 101 video series. This is a great place to start if you're new to live sound. 00:25 How people end up in live sound 01:11 Topics covered in this video series 02:50 Live sound people should be musicians 03:45 Work on your listening skills 04:30 Allow me to introduce myself 07:31 Recommended live sound reading JOIN THE COMMUNITY Community: http://bit.ly/LiveSound101 AVST Podcast: http://AVShopTalk.com Recommended Reading: The Art of Recording - http://amzn.to/TsexTT Acoustics & Psychoacoustics - http://amzn.to/WNmvH9 Assistant Engineers Handbook - http://amzn.to/WeL2Up Audio in Media - http://amzn.to/VvPZpK Sound Reinforcement - http://amzn.to/X4suFR The Microphone Book - http://amzn.to/UfBvzr EDIT 11/20/15: This 8 vi...
What is audio engineering? Find out in this introductory tutorial, as seasoned engineer Brent Carpenter provides an overview of the process. Watch more at http://www.lynda.com/Audio-Audio-Engineering-tutorials/Live-Sound-Engineering-Techniques-Tour-Rush/142975-2.html?utm_campaign=M0kqIzSlUMo&utm;_medium=viral&utm;_source=youtube. This tutorial is a single movie from the course Live Sound Engineering Techniques: On Tour with Rush, on lynda.com. The complete course, which is 1 hour and 18 minutes long, follows top-tier live sound engineer Brent Carpenter around the setup for a Rush concert in a 12,000-seat arena show in Denver, Colorado. Introduction 1. Setting Up the Sound System 2. The Onstage Monitor Mix 3. The Clockwork Angels Stage Tour 4. Front-of-House Sound 5. When the Band Hits the ...
Calculating delays for a precedence imaging sound reinforcement system
Calculating delay and arrival times in a sound reinforcement system
Sound Reinforcement Class by Mark McFarlane Recorded Date: Oct 13th, 2010 - Theory - How we hear - Time and Frequency Domains - Electrical Goodies - Cable Design and Care - Diagnosing Noise - EQ - Microphones - Reverb and Compression - The Onyx Channel Strip
4:00pm Panel #2 - The Future of Sound Reinforcement d&b; audiotechnik's Ralf Zuleeg Introduction: Tom Clark