-
NICEST Car Horn Ever- DIY
This horn is SO courteous my car was granted Canadian citizenship yesterday.
FREE Audio Book- http://bit.ly/AudibleMarkRober
A review of all the books I've listened to recently: http://bit.ly/MarksAudioBooks
Check out Bob's video: https://youtu.be/smhMLsP5fsM
My buddy Howard does this for a living: https://www.yelp.com/biz/caracoustics-santa-clara
Links to the stuff I used (not sponsored):
Sound board: https://www.amazon.com/gp/product/B00Q3U42DM/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Buttons: https://www.amazon.com/gp/product/B0144DKLW0/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Amp: https://www.amazon.com/gp/product/B01IMRXPFY/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
PA Speaker: https://www.amazon.com/gp/product/B002KO63X2/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
...
published: 14 Jun 2017
-
Does Your Washer Machine Smell Funky?? I Got the Solution...
Want to make some EASY money? Check out my website & get paid daily, no gimmicks! http://epsprosperityhotline.com/bluenterprising
Want to earn FREE gift cards??? Join the wave of people getting free gift cards for just WALKING into a store...to learn more check out this link http://get.shopkick.com/cupertino51471
Follow me on Instagram @brownie_blue08
Also, look into Ebates and get PAID to shop!!! Here is the link below to find out more information:
http://www.ebates.com/rf.do?referrerid=8%2BRbkUbi%2Bh1F3SRetTYzaQ%3D%3D&eeid;=26471
published: 22 Apr 2015
-
Funky Chicken
One of the many crashes during out 9th annual Rotary Ring Out ended up in a strange 'zombi-like' funky chicken dance. I had to get some video from my phone (excuse the poor quality).
published: 24 Aug 2009
-
Be a Part of the Solution - Fantasy United Nation 2016
Be a Part of the Solution - Fantasy United Nation 2016
Apply Now: http://fantasyun.com/#section-apply
As you all know, Model United Nations has been a very important activity in most of our lives for many years. Most of us have gone to MUNs all over Turkey, and we have had a lot fun and academic experience in many of them. But now, a new era awaits...
A new era, where not only UN itself is simulated. An era, where important historical incidents leading to the development of the UN is experienced as well. An era of imagination, an era of innovation, and an era of fantasy.
This era starts with Fantasy United Nations. An organization, unlike historical MUNs, where the participants do not play a certain role, but re-write history. An organization where the academic team leads the delegates ...
published: 04 Jan 2016
-
SketchUp Tutorial for Beginners - Part 2 - Modeling a House
In this video, learn to model a basic house in SketchUp with the push pull and offset tools!
♦SUPPORT ME♦ http://www.thesketchupessentials.com/support
------------------------------------------------------------------------------
To start, we’re going to draw the footprint of our house. If it’s a rectangle, you can just activate the rectangle tool by tapping the “R” key, then typing in the measurements of your house and hitting the enter key.
Now that we have the footprint of our house drawn, we’re going to use the push-pull tool to extrude our house into 3D. To do this, activate the push pull tool by tapping the “P” key, click once on the face of your house, then type in the height you’d like to see and hit the enter key. This will extrude your house at the height you entered.
Now that ...
published: 11 Jul 2017
-
Entity Relationship Diagram (ERD) Tutorial - Part 1
Learn how to create an Entity Relationship Diagram in this tutorial. We provide a basic overview of ERDs and then gives step-by-step training on how to make an ER diagram with correct cardinality.
Entity Relationship Diagrams are comprised of 3 main categories: entities, attributes, and relationships. Entities are objects or concepts that are associated with important data—like a customer, order, or product. Attributes represent properties or traits of an entity, such as a customer’s phone number or home address. Relationships demonstrate the link between entities.
Another main aspect of of ERD's is cardinality, which further defines the relationship between entities in a numerical way. Certain symbols signify the minimum and maximum relationship between different entities.
Additional ...
published: 06 Mar 2017
-
The Air Force’s Crazy 747 Aircraft Carrier Concept
Get the first 2 months of Skillshare for free: https://skl.sh/mustard5
Enjoy over 23,000 classes covering just about anything!
Support Mustard on Patreon: https://www.patreon.com/MustardChannel
Mustard Store: https://teespring.com/stores/mustard-store
Website: https://www.mustardchannel.com/
Twitter: https://twitter.com/MustardVideos
It sounds like the stuff of science fiction: A Boeing 747 with an internal hanger loaded with 10 specially designed fighter jets. An on board crew to launch, recover, refuel and rearm the jets while in mid-flight. Sleeping quarters and a crew lounge to ensure that a squadron of 14 fighter pilots and 18 mission specialists stay rested. All of it hurtling forward at Mach 0.85, 35 thousand feet above sea-level. That’s asking a lot from a Boeing 747 Jumbo Jet. ...
published: 12 Feb 2019
4:53
NICEST Car Horn Ever- DIY
This horn is SO courteous my car was granted Canadian citizenship yesterday.
FREE Audio Book- http://bit.ly/AudibleMarkRober
A review of all the books I've ...
This horn is SO courteous my car was granted Canadian citizenship yesterday.
FREE Audio Book- http://bit.ly/AudibleMarkRober
A review of all the books I've listened to recently: http://bit.ly/MarksAudioBooks
Check out Bob's video: https://youtu.be/smhMLsP5fsM
My buddy Howard does this for a living: https://www.yelp.com/biz/caracoustics-santa-clara
Links to the stuff I used (not sponsored):
Sound board: https://www.amazon.com/gp/product/B00Q3U42DM/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Buttons: https://www.amazon.com/gp/product/B0144DKLW0/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Amp: https://www.amazon.com/gp/product/B01IMRXPFY/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
PA Speaker: https://www.amazon.com/gp/product/B002KO63X2/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
12V to 5V: https://www.amazon.com/gp/product/B00U2DGKOK/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Train Horn (not my exact version but this will work well): https://www.amazon.com/Wolo-847-858-Siberian-Express-Train/dp/B01DDCSOPE/ref=sr_1_4?ie=UTF8&qid;=1497644803&sr;=8-4&keywords;=wolo+train+horn
http://wolo-mfg.com/horns/truck-horns/model-805-challenger.html
Less expensive version: https://www.amazon.com/Zone-Tech-Dual-Trumpet-Horn/dp/B00W81EAE6/ref=sr_1_2?ie=UTF8&qid;=1497473330&sr;=8-2&keywords;=truck+horn
***LINKS FIXED***
Courtesy Honk WAV file:
https://www.dropbox.com/s/joob9j13g1dgasc/CourtesyHonk.wav?dl=0
R2D2 WAV file: https://www.dropbox.com/s/233yzjket8pyuya/R2D2.wav?dl=0
MUSIC-
0:27- Ceral Killa- Blue Wednesday - https://soundcloud.com/bluewednesday/
2:18- Berlin- Andrew Applepie- http://andrewapplepie.com/
3:20- Dance- Danijel Zambo- https://soundcloud.com/danijel-zambo
4:38- Special song written just fo my bad self- Lincoln Hoppe, http://lincolnhoppe.com/
5:33- Too Happy to be cool by Notebreak- https://soundcloud.com/notebreak/dubstep-too-happy-to-be-cool
Summary: I customized my car horn to play three different sounds. The main sound is the "Courtesy Honk" which is used to get the attention of other drivers in a non-emergency scenario. It's two quick chirps of the horn that is not only friendly sounding, but it's not as loud as a normal car horn.
PLEASE CONSIDER SUBSCRIBING: http://tinyurl.com/MarkRober-Sub
****************************************
I make videos like this once a month all year long while supplies last:
CHECK OUT MY CHANNEL: http://tinyurl.com/MarkRober-YouTube
FACEBOOK: https://www.facebook.com/MarkRoberYouTube
TWITTER: https://twitter.com/#!/MarkRober
INSTAGRAM: https://www.instagram.com/markrober/
https://wn.com/Nicest_Car_Horn_Ever_Diy
This horn is SO courteous my car was granted Canadian citizenship yesterday.
FREE Audio Book- http://bit.ly/AudibleMarkRober
A review of all the books I've listened to recently: http://bit.ly/MarksAudioBooks
Check out Bob's video: https://youtu.be/smhMLsP5fsM
My buddy Howard does this for a living: https://www.yelp.com/biz/caracoustics-santa-clara
Links to the stuff I used (not sponsored):
Sound board: https://www.amazon.com/gp/product/B00Q3U42DM/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Buttons: https://www.amazon.com/gp/product/B0144DKLW0/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Amp: https://www.amazon.com/gp/product/B01IMRXPFY/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
PA Speaker: https://www.amazon.com/gp/product/B002KO63X2/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
12V to 5V: https://www.amazon.com/gp/product/B00U2DGKOK/ref=oh_aui_search_detailpage?ie=UTF8&psc;=1
Train Horn (not my exact version but this will work well): https://www.amazon.com/Wolo-847-858-Siberian-Express-Train/dp/B01DDCSOPE/ref=sr_1_4?ie=UTF8&qid;=1497644803&sr;=8-4&keywords;=wolo+train+horn
http://wolo-mfg.com/horns/truck-horns/model-805-challenger.html
Less expensive version: https://www.amazon.com/Zone-Tech-Dual-Trumpet-Horn/dp/B00W81EAE6/ref=sr_1_2?ie=UTF8&qid;=1497473330&sr;=8-2&keywords;=truck+horn
***LINKS FIXED***
Courtesy Honk WAV file:
https://www.dropbox.com/s/joob9j13g1dgasc/CourtesyHonk.wav?dl=0
R2D2 WAV file: https://www.dropbox.com/s/233yzjket8pyuya/R2D2.wav?dl=0
MUSIC-
0:27- Ceral Killa- Blue Wednesday - https://soundcloud.com/bluewednesday/
2:18- Berlin- Andrew Applepie- http://andrewapplepie.com/
3:20- Dance- Danijel Zambo- https://soundcloud.com/danijel-zambo
4:38- Special song written just fo my bad self- Lincoln Hoppe, http://lincolnhoppe.com/
5:33- Too Happy to be cool by Notebreak- https://soundcloud.com/notebreak/dubstep-too-happy-to-be-cool
Summary: I customized my car horn to play three different sounds. The main sound is the "Courtesy Honk" which is used to get the attention of other drivers in a non-emergency scenario. It's two quick chirps of the horn that is not only friendly sounding, but it's not as loud as a normal car horn.
PLEASE CONSIDER SUBSCRIBING: http://tinyurl.com/MarkRober-Sub
****************************************
I make videos like this once a month all year long while supplies last:
CHECK OUT MY CHANNEL: http://tinyurl.com/MarkRober-YouTube
FACEBOOK: https://www.facebook.com/MarkRoberYouTube
TWITTER: https://twitter.com/#!/MarkRober
INSTAGRAM: https://www.instagram.com/markrober/
- published: 14 Jun 2017
- views: 35672394
5:04
Does Your Washer Machine Smell Funky?? I Got the Solution...
Want to make some EASY money? Check out my website & get paid daily, no gimmicks! http://epsprosperityhotline.com/bluenterprising
Want to earn FREE gift cards?...
Want to make some EASY money? Check out my website & get paid daily, no gimmicks! http://epsprosperityhotline.com/bluenterprising
Want to earn FREE gift cards??? Join the wave of people getting free gift cards for just WALKING into a store...to learn more check out this link http://get.shopkick.com/cupertino51471
Follow me on Instagram @brownie_blue08
Also, look into Ebates and get PAID to shop!!! Here is the link below to find out more information:
http://www.ebates.com/rf.do?referrerid=8%2BRbkUbi%2Bh1F3SRetTYzaQ%3D%3D&eeid;=26471
https://wn.com/Does_Your_Washer_Machine_Smell_Funky_I_Got_The_Solution...
Want to make some EASY money? Check out my website & get paid daily, no gimmicks! http://epsprosperityhotline.com/bluenterprising
Want to earn FREE gift cards??? Join the wave of people getting free gift cards for just WALKING into a store...to learn more check out this link http://get.shopkick.com/cupertino51471
Follow me on Instagram @brownie_blue08
Also, look into Ebates and get PAID to shop!!! Here is the link below to find out more information:
http://www.ebates.com/rf.do?referrerid=8%2BRbkUbi%2Bh1F3SRetTYzaQ%3D%3D&eeid;=26471
- published: 22 Apr 2015
- views: 79
0:29
Funky Chicken
One of the many crashes during out 9th annual Rotary Ring Out ended up in a strange 'zombi-like' funky chicken dance. I had to get some video from my phone (exc...
One of the many crashes during out 9th annual Rotary Ring Out ended up in a strange 'zombi-like' funky chicken dance. I had to get some video from my phone (excuse the poor quality).
https://wn.com/Funky_Chicken
One of the many crashes during out 9th annual Rotary Ring Out ended up in a strange 'zombi-like' funky chicken dance. I had to get some video from my phone (excuse the poor quality).
- published: 24 Aug 2009
- views: 531
2:01
Be a Part of the Solution - Fantasy United Nation 2016
Be a Part of the Solution - Fantasy United Nation 2016
Apply Now: http://fantasyun.com/#section-apply
As you all know, Model United Nations has been a very imp...
Be a Part of the Solution - Fantasy United Nation 2016
Apply Now: http://fantasyun.com/#section-apply
As you all know, Model United Nations has been a very important activity in most of our lives for many years. Most of us have gone to MUNs all over Turkey, and we have had a lot fun and academic experience in many of them. But now, a new era awaits...
A new era, where not only UN itself is simulated. An era, where important historical incidents leading to the development of the UN is experienced as well. An era of imagination, an era of innovation, and an era of fantasy.
This era starts with Fantasy United Nations. An organization, unlike historical MUNs, where the participants do not play a certain role, but re-write history. An organization where the academic team leads the delegates in their effort to change the course of history as they deem appropriate. An organization which will be held in one of the best hotels in the capital. An organization, which will totally change your perception of entertainment.
As the abbreviation suggests, FUN is what we want, FUN is what we need, and FUN is actually what we all have been waiting for. Thereby, it is my honour to invite you to the first session of FUN, which will be taking place at Bera Ankara Hotel, from 28-31 January 2016.
We will be having 6 committees at FUN which are;
- College of Cardinals
- Ministry of Magic
- World at War
- Magna Carta
- UEFA
- Congress of Vienna
Choose the committee that suits you and become a part of the emerging FUN Family. If you don't, I guarantee you that one day you will regret missing this historical chance.
Do not hesitate to ask me any questions regarding the academic aspect of this organization. And as always, have FUN!
Follow us on social media:
Twitter: http://twitter.com/FunAnkara
Instagram: http://instagram.com/fantasyun
Video by Loyft Medya
http://www.loyft.com
https://wn.com/Be_A_Part_Of_The_Solution_Fantasy_United_Nation_2016
Be a Part of the Solution - Fantasy United Nation 2016
Apply Now: http://fantasyun.com/#section-apply
As you all know, Model United Nations has been a very important activity in most of our lives for many years. Most of us have gone to MUNs all over Turkey, and we have had a lot fun and academic experience in many of them. But now, a new era awaits...
A new era, where not only UN itself is simulated. An era, where important historical incidents leading to the development of the UN is experienced as well. An era of imagination, an era of innovation, and an era of fantasy.
This era starts with Fantasy United Nations. An organization, unlike historical MUNs, where the participants do not play a certain role, but re-write history. An organization where the academic team leads the delegates in their effort to change the course of history as they deem appropriate. An organization which will be held in one of the best hotels in the capital. An organization, which will totally change your perception of entertainment.
As the abbreviation suggests, FUN is what we want, FUN is what we need, and FUN is actually what we all have been waiting for. Thereby, it is my honour to invite you to the first session of FUN, which will be taking place at Bera Ankara Hotel, from 28-31 January 2016.
We will be having 6 committees at FUN which are;
- College of Cardinals
- Ministry of Magic
- World at War
- Magna Carta
- UEFA
- Congress of Vienna
Choose the committee that suits you and become a part of the emerging FUN Family. If you don't, I guarantee you that one day you will regret missing this historical chance.
Do not hesitate to ask me any questions regarding the academic aspect of this organization. And as always, have FUN!
Follow us on social media:
Twitter: http://twitter.com/FunAnkara
Instagram: http://instagram.com/fantasyun
Video by Loyft Medya
http://www.loyft.com
- published: 04 Jan 2016
- views: 1219
18:38
SketchUp Tutorial for Beginners - Part 2 - Modeling a House
In this video, learn to model a basic house in SketchUp with the push pull and offset tools!
♦SUPPORT ME♦ http://www.thesketchupessentials.com/support
---------...
In this video, learn to model a basic house in SketchUp with the push pull and offset tools!
♦SUPPORT ME♦ http://www.thesketchupessentials.com/support
------------------------------------------------------------------------------
To start, we’re going to draw the footprint of our house. If it’s a rectangle, you can just activate the rectangle tool by tapping the “R” key, then typing in the measurements of your house and hitting the enter key.
Now that we have the footprint of our house drawn, we’re going to use the push-pull tool to extrude our house into 3D. To do this, activate the push pull tool by tapping the “P” key, click once on the face of your house, then type in the height you’d like to see and hit the enter key. This will extrude your house at the height you entered.
Now that we have our house shape, we’re going to add slope to our roof. Probably the simplest way is to find the midpoint of your house, then use the line tool to draw a line up 3’. Once you’ve drawn your line up, you can draw lines to the two corners to create a face, then erase your center line so that the face you created is one uniform face. Then, use the push-pull tool to extrude this face to the back side of your house.
Remember that you can use inferencing as you do this to quickly draw this new shape to the back side of your house. You can click anywhere on the back side to do this.
Now what we’re going to do is use the offset tool to draw our eave. Remember, the offset tool will draw a series of lines based on the lines around the perimeter of a face. Activate the offset tool, click on your face, then type in a distance, like 6”, and hit the enter key. Now clean up the new face that was created, then push pull it so that you have a 12” overhang on one side, then extrude it back the other way so you have a 12” overhang on the other side.
Now, let’s add a door and a window. To do this, we’re going to use the rectangle tool to draw our door, then use the offset tool to create some trim. You can start by using the rectangle tool to draw your door – in this case, draw a rectangle that’s 3’ wide x 8’ high. Now, use the offset tool to draw 3” of trim. You can push-pull this trim 3” or so to give your trim some detailing.
Let’s do the same thing with our window – draw a window on the wall to the dimensions you’d like, then use the offset and push-pull tools to create your trim.
The other thing we can do now is create a chimney. To do this, I’m going to start by drawing one lrine right off our roof along the green axis. Once you’ve done this, you can use the rectangle tool to draw a rectangle the size of our chimney. From here, you can either extrude this rectangle down using the push-pull tool, or you can just manually draw in lines along the blue axis that intersect with your roof to fill in the faces. This is probably a cleaner solution.
Finally, if you want to, you can come in and add materials to your house using the materials section in your tray. This is quite easy – just click on the material you’d like, then click on the face you’d like to color in order to apply the material.
One thing I’m going to do really quick is add a wainscot to our model. To do this, all I’m going to do is use the move tool in copy mode to copy the lines around the base of our model up about 3’0”. Simple double click on the face on the bottom to select the perimeter, deselect the face by “Shift Clicking,” and use the move tool in copy mode to move the perimeter lines up about 3’0”. You can push pull it slightly to give it a little depth, then apply a brick material. You could even model a small cap in here if you wanted to.
------------------------------------------------------------------------------
PLEASE LIKE AND SUBSCRIBE
More SketchUp tutorials and resources at http://www.thesketchupessentials.com
Check Us Out On -
Twitter - http://www.twitter.com/easysketchup
Facebook - http://www.facebook.com/thesketchupessentials
Pinterest - http://www.pinterest.com/easysketchup/
https://wn.com/Sketchup_Tutorial_For_Beginners_Part_2_Modeling_A_House
In this video, learn to model a basic house in SketchUp with the push pull and offset tools!
♦SUPPORT ME♦ http://www.thesketchupessentials.com/support
------------------------------------------------------------------------------
To start, we’re going to draw the footprint of our house. If it’s a rectangle, you can just activate the rectangle tool by tapping the “R” key, then typing in the measurements of your house and hitting the enter key.
Now that we have the footprint of our house drawn, we’re going to use the push-pull tool to extrude our house into 3D. To do this, activate the push pull tool by tapping the “P” key, click once on the face of your house, then type in the height you’d like to see and hit the enter key. This will extrude your house at the height you entered.
Now that we have our house shape, we’re going to add slope to our roof. Probably the simplest way is to find the midpoint of your house, then use the line tool to draw a line up 3’. Once you’ve drawn your line up, you can draw lines to the two corners to create a face, then erase your center line so that the face you created is one uniform face. Then, use the push-pull tool to extrude this face to the back side of your house.
Remember that you can use inferencing as you do this to quickly draw this new shape to the back side of your house. You can click anywhere on the back side to do this.
Now what we’re going to do is use the offset tool to draw our eave. Remember, the offset tool will draw a series of lines based on the lines around the perimeter of a face. Activate the offset tool, click on your face, then type in a distance, like 6”, and hit the enter key. Now clean up the new face that was created, then push pull it so that you have a 12” overhang on one side, then extrude it back the other way so you have a 12” overhang on the other side.
Now, let’s add a door and a window. To do this, we’re going to use the rectangle tool to draw our door, then use the offset tool to create some trim. You can start by using the rectangle tool to draw your door – in this case, draw a rectangle that’s 3’ wide x 8’ high. Now, use the offset tool to draw 3” of trim. You can push-pull this trim 3” or so to give your trim some detailing.
Let’s do the same thing with our window – draw a window on the wall to the dimensions you’d like, then use the offset and push-pull tools to create your trim.
The other thing we can do now is create a chimney. To do this, I’m going to start by drawing one lrine right off our roof along the green axis. Once you’ve done this, you can use the rectangle tool to draw a rectangle the size of our chimney. From here, you can either extrude this rectangle down using the push-pull tool, or you can just manually draw in lines along the blue axis that intersect with your roof to fill in the faces. This is probably a cleaner solution.
Finally, if you want to, you can come in and add materials to your house using the materials section in your tray. This is quite easy – just click on the material you’d like, then click on the face you’d like to color in order to apply the material.
One thing I’m going to do really quick is add a wainscot to our model. To do this, all I’m going to do is use the move tool in copy mode to copy the lines around the base of our model up about 3’0”. Simple double click on the face on the bottom to select the perimeter, deselect the face by “Shift Clicking,” and use the move tool in copy mode to move the perimeter lines up about 3’0”. You can push pull it slightly to give it a little depth, then apply a brick material. You could even model a small cap in here if you wanted to.
------------------------------------------------------------------------------
PLEASE LIKE AND SUBSCRIBE
More SketchUp tutorials and resources at http://www.thesketchupessentials.com
Check Us Out On -
Twitter - http://www.twitter.com/easysketchup
Facebook - http://www.facebook.com/thesketchupessentials
Pinterest - http://www.pinterest.com/easysketchup/
- published: 11 Jul 2017
- views: 127262
6:57
Entity Relationship Diagram (ERD) Tutorial - Part 1
Learn how to create an Entity Relationship Diagram in this tutorial. We provide a basic overview of ERDs and then gives step-by-step training on how to make an ...
Learn how to create an Entity Relationship Diagram in this tutorial. We provide a basic overview of ERDs and then gives step-by-step training on how to make an ER diagram with correct cardinality.
Entity Relationship Diagrams are comprised of 3 main categories: entities, attributes, and relationships. Entities are objects or concepts that are associated with important data—like a customer, order, or product. Attributes represent properties or traits of an entity, such as a customer’s phone number or home address. Relationships demonstrate the link between entities.
Another main aspect of of ERD's is cardinality, which further defines the relationship between entities in a numerical way. Certain symbols signify the minimum and maximum relationship between different entities.
Additional ERD information: https://www.lucidchart.com/pages/entity-relationship-diagram-tutorial
——
Learn more and sign up:
https://www.lucidchart.com/users/register
Follow us:
Facebook: https://www.facebook.com/lucidchart
Twitter: https://twitter.com/lucidchart
Instagram: https://www.instagram.com/lucidchart
LinkedIn: https://www.linkedin.com/company/lucidsoftware
https://wn.com/Entity_Relationship_Diagram_(Erd)_Tutorial_Part_1
Learn how to create an Entity Relationship Diagram in this tutorial. We provide a basic overview of ERDs and then gives step-by-step training on how to make an ER diagram with correct cardinality.
Entity Relationship Diagrams are comprised of 3 main categories: entities, attributes, and relationships. Entities are objects or concepts that are associated with important data—like a customer, order, or product. Attributes represent properties or traits of an entity, such as a customer’s phone number or home address. Relationships demonstrate the link between entities.
Another main aspect of of ERD's is cardinality, which further defines the relationship between entities in a numerical way. Certain symbols signify the minimum and maximum relationship between different entities.
Additional ERD information: https://www.lucidchart.com/pages/entity-relationship-diagram-tutorial
——
Learn more and sign up:
https://www.lucidchart.com/users/register
Follow us:
Facebook: https://www.facebook.com/lucidchart
Twitter: https://twitter.com/lucidchart
Instagram: https://www.instagram.com/lucidchart
LinkedIn: https://www.linkedin.com/company/lucidsoftware
- published: 06 Mar 2017
- views: 2117276
10:10
The Air Force’s Crazy 747 Aircraft Carrier Concept
Get the first 2 months of Skillshare for free: https://skl.sh/mustard5
Enjoy over 23,000 classes covering just about anything!
Support Mustard on Patreon: http...
Get the first 2 months of Skillshare for free: https://skl.sh/mustard5
Enjoy over 23,000 classes covering just about anything!
Support Mustard on Patreon: https://www.patreon.com/MustardChannel
Mustard Store: https://teespring.com/stores/mustard-store
Website: https://www.mustardchannel.com/
Twitter: https://twitter.com/MustardVideos
It sounds like the stuff of science fiction: A Boeing 747 with an internal hanger loaded with 10 specially designed fighter jets. An on board crew to launch, recover, refuel and rearm the jets while in mid-flight. Sleeping quarters and a crew lounge to ensure that a squadron of 14 fighter pilots and 18 mission specialists stay rested. All of it hurtling forward at Mach 0.85, 35 thousand feet above sea-level. That’s asking a lot from a Boeing 747 Jumbo Jet. But a once classified feasible study prepared for the U.S. Air Force details how it could be done.
An Airborne Aircraft Carrying Boeing 747 might have been an overly-ambitious, overly-complex and ham-handed idea from 1970s, but it wasn’t entirely out of left field. The U.S. Military had been experiment with the aerial aircraft carrier concepts for nearly half a century. In the early 1930s, two U.S. Navy airships, the USS Akron and the USS Macon carried up to 5 planes stored inside an internal hangar bay. These airborne aircraft carriers enhanced the Navy’s seaborne scouting ability, and the airships’ onboard planes could be deployed for further scouting or defensive purposes. But both USS Akron and Macon were destroyed in weather related accidents not even 3 years after their introductions, helping to put an end to any future airship-based aircraft carriers. But the experiments continued in the 1940s, this time spurred on by a need to protect long-range intercontinental bombers. A seemingly sensible solution to extending escort fighter range was to have long-range bombers carry escort fighters onboard which could be deployed and recovered when needed. But the promising concept proved far more difficult in reality, with aircraft recovery being a particularly dangerous endeavor. Multiple docking methods were attempted, but only one version using a trapeze mechanism and a full-sized fighter ever saw limited service. By the mid-1950s, aerial refueling had proven itself to be a far more practical and safe solution to extending aircraft range.
Yet, the Air Force reexamined the concept again in the early 1970s. This time, spurred on by perceived strategic vulnerabilities to conventional seaborne carriers and the new opportunities brought on the enormous Boeing 747 and Lockheed C-5. The feasibility study titled #747 #Boeing #FlyingAircraftCarrier
Declassified ‘Investigation of a Micro-Fighter/Airborne Aircraft Carrier Concept’ can be found here: https://apps.dtic.mil/dtic/tr/fulltext/u2/529372.pdf
Select footage courtesy the AP Archive
AP Archive website: http://www.aparchive.com YouTube: https://www.youtube.com/c/aparchive and https://www.youtube.com/c/britishmovietone
Special thanks to Nick Arehart for helping clean up our audio:
https://twitter.com/airhrt_
Special thanks to: Wyatt Doran, Gibbo, Jake Hart, Coby Tang, Cole Gerdemann, Christian Altenhofen, Xan Daven, Felix Wassmer, Jefferson Hu, Jean-christophe, Colin Millions, TOOLCO CORP, Anthony, Razvan Caliman, Joseph Zadeh, Mark Mills, Robert Tait, Danny Wolf, Matt Waters, Trent Bosley, and Christopher Boyd for supporting us on Patreon and helping Mustard grow: https://www.patreon.com/MustardChannel
Music (reproduced under license):
Intro Song: “Dark Horizons” - https://www.pond5.com/stock-music/64950802/f-giovannangelo-dark-horizons-accompaniment-only.html
Main Song 2: "Funk This" - https://audiojungle.net/item/funk-this/23168178?s_rank=6
Main Song 2: "Out To Sea" - https://www.pond5.com/stock-music/70971036/out-sea-alt-midtempo-epic-drama-bed-danger-military.html
Main Song 3: “Dark Horizons” - https://www.pond5.com/stock-music/64950802/f-giovannangelo-dark-horizons-accompaniment-only.html
Extro Song: “Undercover Spy” - https://www.pond5.com/stock-music/95173660/undercover-spy.html
https://wn.com/The_Air_Force’S_Crazy_747_Aircraft_Carrier_Concept
Get the first 2 months of Skillshare for free: https://skl.sh/mustard5
Enjoy over 23,000 classes covering just about anything!
Support Mustard on Patreon: https://www.patreon.com/MustardChannel
Mustard Store: https://teespring.com/stores/mustard-store
Website: https://www.mustardchannel.com/
Twitter: https://twitter.com/MustardVideos
It sounds like the stuff of science fiction: A Boeing 747 with an internal hanger loaded with 10 specially designed fighter jets. An on board crew to launch, recover, refuel and rearm the jets while in mid-flight. Sleeping quarters and a crew lounge to ensure that a squadron of 14 fighter pilots and 18 mission specialists stay rested. All of it hurtling forward at Mach 0.85, 35 thousand feet above sea-level. That’s asking a lot from a Boeing 747 Jumbo Jet. But a once classified feasible study prepared for the U.S. Air Force details how it could be done.
An Airborne Aircraft Carrying Boeing 747 might have been an overly-ambitious, overly-complex and ham-handed idea from 1970s, but it wasn’t entirely out of left field. The U.S. Military had been experiment with the aerial aircraft carrier concepts for nearly half a century. In the early 1930s, two U.S. Navy airships, the USS Akron and the USS Macon carried up to 5 planes stored inside an internal hangar bay. These airborne aircraft carriers enhanced the Navy’s seaborne scouting ability, and the airships’ onboard planes could be deployed for further scouting or defensive purposes. But both USS Akron and Macon were destroyed in weather related accidents not even 3 years after their introductions, helping to put an end to any future airship-based aircraft carriers. But the experiments continued in the 1940s, this time spurred on by a need to protect long-range intercontinental bombers. A seemingly sensible solution to extending escort fighter range was to have long-range bombers carry escort fighters onboard which could be deployed and recovered when needed. But the promising concept proved far more difficult in reality, with aircraft recovery being a particularly dangerous endeavor. Multiple docking methods were attempted, but only one version using a trapeze mechanism and a full-sized fighter ever saw limited service. By the mid-1950s, aerial refueling had proven itself to be a far more practical and safe solution to extending aircraft range.
Yet, the Air Force reexamined the concept again in the early 1970s. This time, spurred on by perceived strategic vulnerabilities to conventional seaborne carriers and the new opportunities brought on the enormous Boeing 747 and Lockheed C-5. The feasibility study titled #747 #Boeing #FlyingAircraftCarrier
Declassified ‘Investigation of a Micro-Fighter/Airborne Aircraft Carrier Concept’ can be found here: https://apps.dtic.mil/dtic/tr/fulltext/u2/529372.pdf
Select footage courtesy the AP Archive
AP Archive website: http://www.aparchive.com YouTube: https://www.youtube.com/c/aparchive and https://www.youtube.com/c/britishmovietone
Special thanks to Nick Arehart for helping clean up our audio:
https://twitter.com/airhrt_
Special thanks to: Wyatt Doran, Gibbo, Jake Hart, Coby Tang, Cole Gerdemann, Christian Altenhofen, Xan Daven, Felix Wassmer, Jefferson Hu, Jean-christophe, Colin Millions, TOOLCO CORP, Anthony, Razvan Caliman, Joseph Zadeh, Mark Mills, Robert Tait, Danny Wolf, Matt Waters, Trent Bosley, and Christopher Boyd for supporting us on Patreon and helping Mustard grow: https://www.patreon.com/MustardChannel
Music (reproduced under license):
Intro Song: “Dark Horizons” - https://www.pond5.com/stock-music/64950802/f-giovannangelo-dark-horizons-accompaniment-only.html
Main Song 2: "Funk This" - https://audiojungle.net/item/funk-this/23168178?s_rank=6
Main Song 2: "Out To Sea" - https://www.pond5.com/stock-music/70971036/out-sea-alt-midtempo-epic-drama-bed-danger-military.html
Main Song 3: “Dark Horizons” - https://www.pond5.com/stock-music/64950802/f-giovannangelo-dark-horizons-accompaniment-only.html
Extro Song: “Undercover Spy” - https://www.pond5.com/stock-music/95173660/undercover-spy.html
- published: 12 Feb 2019
- views: 10081147