- published: 04 Feb 2016
- views: 443912
Create your page here
Wednesday, 12 April 2017
-
remove the playlistArcade Cabinet
- remove the playlistArcade Cabinet
back to playlist
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi!
Subscribe to my channel: http://bit.ly/1k8msFr
Plans for this cabinet are available at http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
HERE'S WHAT I USED:
http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ - Arcade Cabinet - Digital plans
http://amzn.to/1NCVmAb - SawStop cabinet saw
http://amzn.to/1LZGmJS - Skil circular saw
http://amzn.to/1nAb7Q6 - Speed square
http://amzn.to/1SP44ii - 54" Drywall T-Square
http://amzn.to/1GMrfGL - Dewalt 20v drill driver combo
http://amzn.to/1GMjjoW - Dewalt compound miter saw
http://amzn.to/1WXMCJ4 - Dremel Tool
http://amzn.to/1HdQuwD - Grizzly G0555LANV Bandsaw
http://amzn.to/1GyGjbg - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/1GMpZn3 - Kreg Rip Cut (circular saw guide)
http://amzn.to/1GyGp2v - Kreg R3 pocket hole jig
http://amzn.to/1WjF7Q4 - clamp
http://amzn.to/1nzWRXs - 1/2" Overlay Face Frame concealed hinges
http://amzn.to/1nzX3Gb - 48" Piano Hinge
http://amzn.to/1nAbj1O - 11" Digital Protractor
http://amzn.to/1nAbs5g - Digital Angle gauge
http://amzn.to/1WXMM2Z - Classic steel ruler (cork back)
http://amzn.to/1WXNjlo - 24" Soft-close drawer slides
http://amzn.to/1nAbzOh - 27" LCD Monitor
http://www.inventables.com?ref=iltms - X-Carve
http://amzn.to/20fPAeN - Silhouette Portrait (vinyl cutter)
http://amzn.to/1WXN368 - 3" Speaker grilles
http://amzn.to/1WXN89P - Logitech computer speakers
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, PENCILS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
It's been a L-O-N-G time coming (probably longer than you know) but I'm so happy to finally present part 1 of my arcade cabinet build! In case you haven't seen it, be sure to watch my older video all about setting up the Raspberry Pi (using RetroPie) and the controls. If you've got that system all up and running, putting it in something is the next step! I've been working on the plans for this system for a long time, rethinking them over and over to include all of the stuff I wanted my cabinet to have. This was especially important to me, since my wife gave me the OK for this to go in our living room. In my mind, that means that it HAD to be as practical as possible (even though it's completely impractical by nature.)
The biggest difference in my cabinet and the vintage cabinets, is the fact that the modern electronics can literally fit in your pocket, so the majority of the cabinet is empty. I wanted to take advantage of that with my design...
I decided to keep all of the electronics in/around the controls and monitor. This left the area below the controls, and behind the monitor open, so I made them into storage. Underneath the controls is a simple bookshelf with two doors. Behind the monitor was harder to get to, so I designed the cabinet so that one side panel could actually swing open, revealing six drawers, each 24" deep. Being able to swing open the side panel COMPLETELY changed the structure, in comparison to most cabinets, but I totally think it was worthwhile. Second channel: bit.ly/iltms-2
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room.
LaunchBox front end: https://www.launchbox-app.com
Computer Specs:
Dell x8900-2506BLK
Intel Quad Core i7-6700 3.4 GHz Processor
16 GB DDR4 RAM
1 TB HDD Storage
Monitor: 19" ViewSonic VG930m
Controller: X-Arcade Dual Joystick w/ USB
FOLLOW US
Twitter: http://twitter.com/MetalJesusRocks
Facebook: http://facebook.com/MetalJesusRocks
Site: http://www.MetalJesusRocks.com
DMP: https://www.youtube.com/user/DrunkenMasterPaul
BUY Metal Jesus T-shirts: http://shrsl.com/?~9quw
Consider Supporting my Videos on Patreon:
http://www.Patreon.com/MetalJesusRocks
** I was not paid for this video, but Launchbox did provide the computer and upgraded software license for the review. The opinions of the software are my own.
- published: 06 Jan 2017
- views: 70720
Want a small arcade cabinet that's easy to make? Here you go!
Subscribe to my channel: http://bit.ly/1k8msFr
Second Channel: http://bit.ly/iltms-2
My Full Size Arcade Cabinet series: https://www.youtube.com/playlist?list=PLice_sU_6Rfhw7LK-tl8A8u1XYQKeuFri
Setup 2nd player for iPac:
https://www.reddit.com/r/RetroPie/comments/3hu2uy/2_player_ipac2_setup_for_retropie/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
TOOLS LIST:
(some are better than the versions I own)
http://amzn.to/2aCJYGu - SawStop cabinet saw
http://amzn.to/2axFPsA - Skil circular saw
http://amzn.to/2axOLvq - Dewalt 20v drill driver combo
http://amzn.to/2dcJoTR - Countersink drill bits
http://amzn.to/2akFubx - Orbital Sander
http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo
http://amzn.to/2axFRRs - Jigsaw
http://amzn.to/2axPah6 - Grizzly 14" Bandsaw
http://amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/2axGlH9 - Kreg Rip Cut (circular saw guide)
http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter
http://amzn.to/2akFN6c - 2HP Dust Collector
http://amzn.to/2axPmNA - 1 Micron bag
http://amzn.to/2aD7DGO - 11" Digital protractor
http://amzn.to/2ay8MSs - Digital Angle Gauge
http://amzn.to/2akGcWk - Classic steel ruler (cork backed)
http://amzn.to/2ay9XRX - CA Glue (medium)
http://amzn.to/2ay9T4v - CA Activator
http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
http://www.ebay.com/itm/110934669362?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT - Arcade buttons
http://www.ebay.com/itm/ZIPPY-Classic-Competition-Style-2-4-8-way-Arcade-Game-Joystick-Arcade-MAME-JAMMA-/131974095274?hash=item1eba44e1aa - Joystick (Zippy style)
http://amzn.to/2gwLuk6 - Computer speakers
http://amzn.to/2axieIm - Raspberry Pi 3
hhttp://amzn.to/2aAxSQS - Multimeter
http://amzn.to/2anW7yq - Wire
http://amzn.to/2awMqgO - jumpers (Male to Female)
http://www.ultimarc.com/store/section.php?xSec=2 - iPac 2
http://amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones)
http://amzn.to/2gb6IQ2 - Wire connecters
https://www.t-molding.com/1-2in-orange-t-molding.html - T-Molding (1/2" x 20ft.)
http://amzn.to/2giSRc3 - Slotting cutter
http://amzn.to/2gdoYsq - Arbor
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://www.twitch.tv/iliketomakestuff
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
- published: 24 Nov 2016
- views: 17901
Like, subscribe, and comment below.
This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3.
This is a basic cabinet that doesn't use vinyl graphics, or T-molding. Those will be used in future builds.
There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below!
All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arcade-101.html
More explanations and downloadable packages!
Instagram https://www.instagram.com/we_build_stuff/
Recalbox: https://www.recalbox.com
Raspberry Pi operating system - donate to them!
One of my favorite eBay stores: http://stores.ebay.com/sinoarcade
joystick and button sets for $60-$100
My Local suppliers
http://www.rpelectronics.com/
http://leeselectronic.com/en/
Original Cabinet design by http://www.instructables.com/member/rolfebox/
Music:
I dunno by grapes (c) copyright 2008 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/16626 Ft: J Lang, Morusque
another one by grapes (c) copyright 2009 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/19168
- published: 14 Oct 2016
- views: 3799
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be able to play all of the old school retro arcade games including PacMan and Galaga!
In part two of this video we will cover installing all of the electronics into the arcade cabinet, including the use of MAME (Mega Arcade Multi Emulator) and the Maximus Arcade front-end on a Windows 8 PC.
This arcade machine cabinet is custom made from MDF. We drill all of the holes for the joystick and buttons, along with slots for the coin door! In part three of the series we will install the lighted marquee and graphics.
Plans will be available shortly:
http://www.thegeekpub.com/2505/how-to-make-an-arcade-machine-part-1/
Watch Part 2: https://www.youtube.com/watch?v=xIWwMtdzOH0
Find us on Social Media:
Facebook: facebook.com/TheGeekPub
Instagram: instagram.com/TheGeekPub
- published: 26 Jul 2015
- views: 76791
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it can go in anyone's home and is very simple for us to start off on.
We will be updating this in the future adding more extras and upgrading. But for now, this is the minimum of what you want to be looking at.
HERE IS THE KIT I AM USING IN THIS PART: CONTACT RICH FOR 10% OFF BY SAYING MY NAME!
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
Parts lists for everything I used down the bottom!
Complete cabinet builds from start to finish with all links, tips, guides and where to get them from, including links and downloads!
Complete programing and software guides. Tech and wiring, control setups, where to buy and who to avoid. Making this the go to source of information on all the parts you need and where to get them.
If anyone has any bad experiences from sellers or from parts, let me know. Lets not just show who and where to buy, but who and what to avoid. There are lots of great laces out there, but as always, people trying to make quick bucks selling tat!
These arcade builds will be split into logical builds, parts, features and systems. If you would like something featured, please PM me and lets see if it will suit the builders. If anyone has any requests for this type of series or are struggling on something, let me know in the comments.
I want to cover all the things you want or need, so if you have any ideas LET ME KNOW!
Please share this and let others know!
MY TOP 10 EMULATORS! (FULLY WORKING EMULATORS!)
https://www.youtube.com/watch?v=zs-VSiHgXDk
HAPPY GAMING!
NEW!!!! THE SIMPLY AUSTIN STEAM GROUP - LETS GET GAMING TOGETHER GUYS!
http://steamcommunity.com/groups/SimplyAustin
If you would like a new video covering anything you have in mind or have any issues let me know in the comments bellow :D
--------------------------------------------------------------------------------------------------------
------------------------------------ MY SET OF LINKS -------------------------------------
--------------------------------------------------------------------------------------------------------
Please subscribe to my channel, I try to release everything you need to get setup for your gaming pleasures, plus more home made treats :)
MY NEW TWITCH CHANNEL, MAKE SURE YOU FOLLOW AND SUB
http://www.twitch.tv/simply_austin
HERE IS THE FACEBOOK LINK
https://www.facebook.com/simplyaustins
TO FIND OUT ABOUT EARLY RELEASES OF MY FEATURES
https://twitter.com/SimplyAustins
MY WEBSITE:
www.simplyaustin.tv
DONATIONS TOWARDS MAKING MORE VIDS LIKE THIS
PAYPAL = austin585@gmail.com
---------------------------------------------------------------------------
------------ PARTS USED IN THIS BUILD! ----------------
---------------------------------------------------------------------------
BARTOP ARCADE ISELF WITH EXTRAS:
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
10% OFF EVERYTHING WHEN YOU SAY MY NAME!
Use this link for:
- Bartop Parts
- Plexi Glass and Marquee
- Artwork for cab. Templates and Custom in Price!
Cheaper with discount or MDF Option!
SPEAKERS:
https://www.amazon.co.uk/gp/product/B00JRW0M32/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc;=1
MONITOR:
Sourced from E-Bay. You want a DELL 1908FE 19" Monitor 4:3 (Cost me £7.50 for used battered one)
SCREWS FOR MONITOR:
https://www.amazon.co.uk/gp/product/B00DY296HY/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc;=1
HINGES:
https://www.amazon.co.uk/gp/product/B012TCIDPK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc;=1
PVC TRIM:
https://www.amazon.co.uk/gp/product/B00DPKWKYG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc;=1
You need 2 of these to do Marquee and the Monitor Section
I will be adding more parts here for the future parts to this a I find a reliable seller who can ship worldwide. However included in the £300 is the control set I am using, its the :
Xin-Mo board with 2x Zippy sticks and 19 buttons.
Keep tabs on this for future if you want to follow the same setup as we start setting all this up!
Also in Future:
Pi3
PC Build
More Cabs
More Art
More guides and more fun!
LET ME KNOW IF YOU WANT YOUR PRODUCTS FEATURED!!!
CREDITS:
MUSIC:
Ocean Robocop 3 Remix
OC REMIX Sega CD OST music
Ocean Robocop Remix (Sorry I stail cant find the maker of the Tune)
GAMEPLAY:
Various Arcade titles
SFVIntro Trailer at start
MENTIONS:
Rich @ Rich's Bartop Arcade for kicking this series off with one of his builds!
Drunken Punk 800 (For being a great help!)
https://www.youtube.com/user/JoeyDrunko
RocketLauncher Team
HyperSpin Team
LaunchBox Team
RetroFE Team
GameEX Team
Please, if I missed anyone who would like to be part of the credits, please let me know and I will add. I do not take credit for much of the gameplay used in this video and would not like to miss anyones credit due to the 3rd party usage here on YT!
- published: 30 Jun 2016
- views: 46264
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts.
UPDATED version of my other video
* fixed audio
*added links to files
I am no expert at sketchup or photoshop, as a result these files are not perfect but I believe they can be of much help in your own build. In this link you will be able to view and download the following:
* 4 pages in PDF detailing measurements. (slightly different shape under controll panel from final build)
*Editable photoshop files for Marquee and control panel. control panel dimensions are to exact scale for standard buttons.
*Google Schetchup file
https://drive.google.com/folderview?id=0B8hrIa1o1TNZQWRTZ3dtVlAxdU0&usp;=sharing
- published: 10 Jan 2015
- views: 86660
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in others.
I'll post the real time video later so you can follow along
- published: 05 Feb 2017
- views: 986
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade cabinet.
The main goal of our project was to play a handful of our favorite indie games from Steam, so we knew that we would need a little more kick than a Raspberry Pi could provide, as well as a full version of Windows if we wanted complete compatibility.
Our second goal was to make sure the whole system could be booted up by anyone who wanted to play without a lot of time or effort, which requires more than tweaking a few settings in Windows.
Finally, we wanted a system that could be self-contained, but that could also hook up to a spare projector or TV if desired.
Since the games we wanted to play were the highest barrier of entry, we started there. The games we had in mind were titles like Nidhogg, TowerFall Ascension, Samurai Gunn, Divekick, and OlliOlli. They're all great indie games that are easy to pick up, with only a few buttons each, and high replay value.
The retro aesthetic has been popular lately, so these games have relatively low system requirements. We evaluated the highest requirements for each game, and discovered we needed at least two gigabytes of RAM, a processor clocked at 1.4GHz or higher, and integrated graphics supporting DirectX 9.
SUBSCRIBE FOR THE LATEST VIDEOS
http://www.youtube.com/subscription_center?add_user=DigitalTrends
VISIT DIGITAL TRENDS
http://www.digitaltrends.com/
CHECK OUT OUR LATEST PODCAST
http://www.digitaltrends.com/podcasts/
https://www.facebook.com/digitaltrendsftw
https://twitter.com/digitaltrends
https://plus.google.com/+digitaltrends/posts
- published: 23 May 2015
- views: 31351
Video game arcade cabinet
A video game arcade cabinet, also known as a video arcade machine or video coin-op, is the housing within which a video arcade game's hardware resides. Most cabinets designed since the mid-1980s conform to the JAMMA wiring standard. Some include additional connectors for features not included in the standard.
Parts of an arcade cabinet
Note: Because arcade cabinets vary according to the games they were built for or contain, they may well not possess all of the parts listed below:
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Video_game_arcade_cabinet
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Raspberry Pi
The Raspberry Pi is a series of credit card–sized single-board computers developed in England, United Kingdom by the Raspberry Pi Foundation with the intention of promoting the teaching of basic computer science in schools and developing countries. The original Raspberry Pi and Raspberry Pi 2 are manufactured in several board configurations through licensed manufacturing agreements with Newark element14 (Premier Farnell), RS Components and Egoman. The hardware is the same across all manufacturers.
All Raspberry Pis include the same VideoCore IV GPU, and either a single-core ARMv6-compatible CPU or a newer ARMv7-compatible quad-core one (in Pi 2); and 1 GB of RAM (in Pi 2), 512 MB (in Pi 1 models B and B+), or 256 MB (in models A and A+, and in the older model B). They have a Secure Digital (SDHC) slot (models A and B) or a MicroSDHC one (models A+, B+, and Pi 2) for boot media and persistent storage. In 2014, the Raspberry Pi Foundation launched the Compute Module, for use as a part of embedded systems for the same compute power as the original Pi. In early February 2015, the next-generation Raspberry Pi, Raspberry Pi 2, was released. That new computer board is initially available only in one configuration (model B) and has a quad-core ARM Cortex-A7 CPU and 1 GB of RAM with remaining specifications being similar to those of the previous generation model B+. The Raspberry Pi 2 retains the same US$35 price point of the model B, with the US$20 model A+ remaining on sale. In November 2015, the Foundation launched the Raspberry Pi Zero, a smaller product priced at US$5.
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Raspberry_Pi
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
Arcade
Arcade may refer to:
Places
Australia
Italy
United Kingdom
United States
This page contains text from Wikipedia, the Free Encyclopedia -
https://wn.com/Arcade
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
This article is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License, which means that you can copy and modify it as long as the entire work (including additions) remains under this license.
- Loading...
-
12:18Arcade Cabinet build - Part 1 // How-To
Arcade Cabinet build - Part 1 // How-ToArcade Cabinet build - Part 1 // How-To
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi! Subscribe to my channel: http://bit.ly/1k8msFr Plans for this cabinet are available at http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com HERE'S WHAT I USED: http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ - Arcade Cabinet - Digital plans http://amzn.to/1NCVmAb - SawStop cabinet saw http://amzn.to/1LZGmJS - Skil circular saw http://amzn.to/1nAb7Q6 - Speed square http://amzn.to/1SP44ii - 54" Drywall T-Square http://amzn.to/1GMrfGL - Dewalt 20v drill driver combo http://amzn.to/1GMjjoW - Dewalt compound miter saw http://amzn.to/1WXMCJ4 - Dremel Tool http://amzn.to/1HdQuwD - Grizzly G0555LANV Bandsaw http://amzn.to/1GyGjbg - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.) http://amzn.to/1GMpZn3 - Kreg Rip Cut (circular saw guide) http://amzn.to/1GyGp2v - Kreg R3 pocket hole jig http://amzn.to/1WjF7Q4 - clamp http://amzn.to/1nzWRXs - 1/2" Overlay Face Frame concealed hinges http://amzn.to/1nzX3Gb - 48" Piano Hinge http://amzn.to/1nAbj1O - 11" Digital Protractor http://amzn.to/1nAbs5g - Digital Angle gauge http://amzn.to/1WXMM2Z - Classic steel ruler (cork back) http://amzn.to/1WXNjlo - 24" Soft-close drawer slides http://amzn.to/1nAbzOh - 27" LCD Monitor http://www.inventables.com?ref=iltms - X-Carve http://amzn.to/20fPAeN - Silhouette Portrait (vinyl cutter) http://amzn.to/1WXN368 - 3" Speaker grilles http://amzn.to/1WXN89P - Logitech computer speakers Want to support ILTMS? Get early viewing, exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, PENCILS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://instagram.com/iliketomakestuff http://facebook.com/iltms It's been a L-O-N-G time coming (probably longer than you know) but I'm so happy to finally present part 1 of my arcade cabinet build! In case you haven't seen it, be sure to watch my older video all about setting up the Raspberry Pi (using RetroPie) and the controls. If you've got that system all up and running, putting it in something is the next step! I've been working on the plans for this system for a long time, rethinking them over and over to include all of the stuff I wanted my cabinet to have. This was especially important to me, since my wife gave me the OK for this to go in our living room. In my mind, that means that it HAD to be as practical as possible (even though it's completely impractical by nature.) The biggest difference in my cabinet and the vintage cabinets, is the fact that the modern electronics can literally fit in your pocket, so the majority of the cabinet is empty. I wanted to take advantage of that with my design... I decided to keep all of the electronics in/around the controls and monitor. This left the area below the controls, and behind the monitor open, so I made them into storage. Underneath the controls is a simple bookshelf with two doors. Behind the monitor was harder to get to, so I designed the cabinet so that one side panel could actually swing open, revealing six drawers, each 24" deep. Being able to swing open the side panel COMPLETELY changed the structure, in comparison to most cabinets, but I totally think it was worthwhile. Second channel: bit.ly/iltms-2 -
7:45My Arcade MAME Cabinet - UPDATED for 2017!
My Arcade MAME Cabinet - UPDATED for 2017!My Arcade MAME Cabinet - UPDATED for 2017!
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room. LaunchBox front end: https://www.launchbox-app.com Computer Specs: Dell x8900-2506BLK Intel Quad Core i7-6700 3.4 GHz Processor 16 GB DDR4 RAM 1 TB HDD Storage Monitor: 19" ViewSonic VG930m Controller: X-Arcade Dual Joystick w/ USB FOLLOW US Twitter: http://twitter.com/MetalJesusRocks Facebook: http://facebook.com/MetalJesusRocks Site: http://www.MetalJesusRocks.com DMP: https://www.youtube.com/user/DrunkenMasterPaul BUY Metal Jesus T-shirts: http://shrsl.com/?~9quw Consider Supporting my Videos on Patreon: http://www.Patreon.com/MetalJesusRocks ** I was not paid for this video, but Launchbox did provide the computer and upgraded software license for the review. The opinions of the software are my own. -
9:57Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-ToBar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
Want a small arcade cabinet that's easy to make? Here you go! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 My Full Size Arcade Cabinet series: https://www.youtube.com/playlist?list=PLice_sU_6Rfhw7LK-tl8A8u1XYQKeuFri Setup 2nd player for iPac: https://www.reddit.com/r/RetroPie/comments/3hu2uy/2_player_ipac2_setup_for_retropie/ MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com TOOLS LIST: (some are better than the versions I own) http://amzn.to/2aCJYGu - SawStop cabinet saw http://amzn.to/2axFPsA - Skil circular saw http://amzn.to/2axOLvq - Dewalt 20v drill driver combo http://amzn.to/2dcJoTR - Countersink drill bits http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo http://amzn.to/2axFRRs - Jigsaw http://amzn.to/2axPah6 - Grizzly 14" Bandsaw http://amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.) http://amzn.to/2axGlH9 - Kreg Rip Cut (circular saw guide) http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter http://amzn.to/2akFN6c - 2HP Dust Collector http://amzn.to/2axPmNA - 1 Micron bag http://amzn.to/2aD7DGO - 11" Digital protractor http://amzn.to/2ay8MSs - Digital Angle Gauge http://amzn.to/2akGcWk - Classic steel ruler (cork backed) http://amzn.to/2ay9XRX - CA Glue (medium) http://amzn.to/2ay9T4v - CA Activator http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter) http://www.ebay.com/itm/110934669362?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT - Arcade buttons http://www.ebay.com/itm/ZIPPY-Classic-Competition-Style-2-4-8-way-Arcade-Game-Joystick-Arcade-MAME-JAMMA-/131974095274?hash=item1eba44e1aa - Joystick (Zippy style) http://amzn.to/2gwLuk6 - Computer speakers http://amzn.to/2axieIm - Raspberry Pi 3 hhttp://amzn.to/2aAxSQS - Multimeter http://amzn.to/2anW7yq - Wire http://amzn.to/2awMqgO - jumpers (Male to Female) http://www.ultimarc.com/store/section.php?xSec=2 - iPac 2 http://amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones) http://amzn.to/2gb6IQ2 - Wire connecters https://www.t-molding.com/1-2in-orange-t-molding.html - T-Molding (1/2" x 20ft.) http://amzn.to/2giSRc3 - Slotting cutter http://amzn.to/2gdoYsq - Arbor Want to support ILTMS? Get early viewing, exclusive content and more... http://www.iliketomakestuff.com/patreon BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!! http://www.iliketomakestuff.com/store FOLLOW: http://twitter.com/iliketomakestuf http://www.twitch.tv/iliketomakestuff http://instagram.com/iliketomakestuff http://facebook.com/iltms -
20:15How to make a DIY Raspberry Pi Arcade Cabinet!
How to make a DIY Raspberry Pi Arcade Cabinet!How to make a DIY Raspberry Pi Arcade Cabinet!
Like, subscribe, and comment below. This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3. This is a basic cabinet that doesn't use vinyl graphics, or T-molding. Those will be used in future builds. There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below! All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arcade-101.html More explanations and downloadable packages! Instagram https://www.instagram.com/we_build_stuff/ Recalbox: https://www.recalbox.com Raspberry Pi operating system - donate to them! One of my favorite eBay stores: http://stores.ebay.com/sinoarcade joystick and button sets for $60-$100 My Local suppliers http://www.rpelectronics.com/ http://leeselectronic.com/en/ Original Cabinet design by http://www.instructables.com/member/rolfebox/ Music: I dunno by grapes (c) copyright 2008 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/16626 Ft: J Lang, Morusque another one by grapes (c) copyright 2009 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/19168 -
6:05How to make an Arcade Machine: Part 1
How to make an Arcade Machine: Part 1How to make an Arcade Machine: Part 1
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be able to play all of the old school retro arcade games including PacMan and Galaga! In part two of this video we will cover installing all of the electronics into the arcade cabinet, including the use of MAME (Mega Arcade Multi Emulator) and the Maximus Arcade front-end on a Windows 8 PC. This arcade machine cabinet is custom made from MDF. We drill all of the holes for the joystick and buttons, along with slots for the coin door! In part three of the series we will install the lighted marquee and graphics. Plans will be available shortly: http://www.thegeekpub.com/2505/how-to-make-an-arcade-machine-part-1/ Watch Part 2: https://www.youtube.com/watch?v=xIWwMtdzOH0 Find us on Social Media: Facebook: facebook.com/TheGeekPub Instagram: instagram.com/TheGeekPub -
45:51Ultimate Arcade Cabinet - The Easy Budget Build
Ultimate Arcade Cabinet - The Easy Budget BuildUltimate Arcade Cabinet - The Easy Budget Build
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it can go in anyone's home and is very simple for us to start off on. We will be updating this in the future adding more extras and upgrading. But for now, this is the minimum of what you want to be looking at. HERE IS THE KIT I AM USING IN THIS PART: CONTACT RICH FOR 10% OFF BY SAYING MY NAME! https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts Parts lists for everything I used down the bottom! Complete cabinet builds from start to finish with all links, tips, guides and where to get them from, including links and downloads! Complete programing and software guides. Tech and wiring, control setups, where to buy and who to avoid. Making this the go to source of information on all the parts you need and where to get them. If anyone has any bad experiences from sellers or from parts, let me know. Lets not just show who and where to buy, but who and what to avoid. There are lots of great laces out there, but as always, people trying to make quick bucks selling tat! These arcade builds will be split into logical builds, parts, features and systems. If you would like something featured, please PM me and lets see if it will suit the builders. If anyone has any requests for this type of series or are struggling on something, let me know in the comments. I want to cover all the things you want or need, so if you have any ideas LET ME KNOW! Please share this and let others know! MY TOP 10 EMULATORS! (FULLY WORKING EMULATORS!) https://www.youtube.com/watch?v=zs-VSiHgXDk HAPPY GAMING! NEW!!!! THE SIMPLY AUSTIN STEAM GROUP - LETS GET GAMING TOGETHER GUYS! http://steamcommunity.com/groups/SimplyAustin If you would like a new video covering anything you have in mind or have any issues let me know in the comments bellow :D -------------------------------------------------------------------------------------------------------- ------------------------------------ MY SET OF LINKS ------------------------------------- -------------------------------------------------------------------------------------------------------- Please subscribe to my channel, I try to release everything you need to get setup for your gaming pleasures, plus more home made treats :) MY NEW TWITCH CHANNEL, MAKE SURE YOU FOLLOW AND SUB http://www.twitch.tv/simply_austin HERE IS THE FACEBOOK LINK https://www.facebook.com/simplyaustins TO FIND OUT ABOUT EARLY RELEASES OF MY FEATURES https://twitter.com/SimplyAustins MY WEBSITE: www.simplyaustin.tv DONATIONS TOWARDS MAKING MORE VIDS LIKE THIS PAYPAL = austin585@gmail.com --------------------------------------------------------------------------- ------------ PARTS USED IN THIS BUILD! ---------------- --------------------------------------------------------------------------- BARTOP ARCADE ISELF WITH EXTRAS: https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts 10% OFF EVERYTHING WHEN YOU SAY MY NAME! Use this link for: - Bartop Parts - Plexi Glass and Marquee - Artwork for cab. Templates and Custom in Price! Cheaper with discount or MDF Option! SPEAKERS: https://www.amazon.co.uk/gp/product/B00JRW0M32/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc;=1 MONITOR: Sourced from E-Bay. You want a DELL 1908FE 19" Monitor 4:3 (Cost me £7.50 for used battered one) SCREWS FOR MONITOR: https://www.amazon.co.uk/gp/product/B00DY296HY/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc;=1 HINGES: https://www.amazon.co.uk/gp/product/B012TCIDPK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc;=1 PVC TRIM: https://www.amazon.co.uk/gp/product/B00DPKWKYG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc;=1 You need 2 of these to do Marquee and the Monitor Section I will be adding more parts here for the future parts to this a I find a reliable seller who can ship worldwide. However included in the £300 is the control set I am using, its the : Xin-Mo board with 2x Zippy sticks and 19 buttons. Keep tabs on this for future if you want to follow the same setup as we start setting all this up! Also in Future: Pi3 PC Build More Cabs More Art More guides and more fun! LET ME KNOW IF YOU WANT YOUR PRODUCTS FEATURED!!! CREDITS: MUSIC: Ocean Robocop 3 Remix OC REMIX Sega CD OST music Ocean Robocop Remix (Sorry I stail cant find the maker of the Tune) GAMEPLAY: Various Arcade titles SFVIntro Trailer at start MENTIONS: Rich @ Rich's Bartop Arcade for kicking this series off with one of his builds! Drunken Punk 800 (For being a great help!) https://www.youtube.com/user/JoeyDrunko RocketLauncher Team HyperSpin Team LaunchBox Team RetroFE Team GameEX Team Please, if I missed anyone who would like to be part of the credits, please let me know and I will add. I do not take credit for much of the gameplay used in this video and would not like to miss anyones credit due to the 3rd party usage here on YT! -
6:31Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANSCustom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts. UPDATED version of my other video * fixed audio *added links to files I am no expert at sketchup or photoshop, as a result these files are not perfect but I believe they can be of much help in your own build. In this link you will be able to view and download the following: * 4 pages in PDF detailing measurements. (slightly different shape under controll panel from final build) *Editable photoshop files for Marquee and control panel. control panel dimensions are to exact scale for standard buttons. *Google Schetchup file https://drive.google.com/folderview?id=0B8hrIa1o1TNZQWRTZ3dtVlAxdU0&usp;=sharing -
15:24Building a full size mame arcade cabinet start to finish
Building a full size mame arcade cabinet start to finishBuilding a full size mame arcade cabinet start to finish
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in others. I'll post the real time video later so you can follow along -
21:39World's BEST Arcade Machine!
World's BEST Arcade Machine! -
4:14How to build an Arcade Cabinet
How to build an Arcade CabinetHow to build an Arcade Cabinet
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade cabinet. The main goal of our project was to play a handful of our favorite indie games from Steam, so we knew that we would need a little more kick than a Raspberry Pi could provide, as well as a full version of Windows if we wanted complete compatibility. Our second goal was to make sure the whole system could be booted up by anyone who wanted to play without a lot of time or effort, which requires more than tweaking a few settings in Windows. Finally, we wanted a system that could be self-contained, but that could also hook up to a spare projector or TV if desired. Since the games we wanted to play were the highest barrier of entry, we started there. The games we had in mind were titles like Nidhogg, TowerFall Ascension, Samurai Gunn, Divekick, and OlliOlli. They're all great indie games that are easy to pick up, with only a few buttons each, and high replay value. The retro aesthetic has been popular lately, so these games have relatively low system requirements. We evaluated the highest requirements for each game, and discovered we needed at least two gigabytes of RAM, a processor clocked at 1.4GHz or higher, and integrated graphics supporting DirectX 9. SUBSCRIBE FOR THE LATEST VIDEOS http://www.youtube.com/subscription_center?add_user=DigitalTrends VISIT DIGITAL TRENDS http://www.digitaltrends.com/ CHECK OUT OUR LATEST PODCAST http://www.digitaltrends.com/podcasts/ https://www.facebook.com/digitaltrendsftw https://twitter.com/digitaltrends https://plus.google.com/+digitaltrends/posts
-
Arcade Cabinet build - Part 1 // How-To
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi! Subscribe to my channel: http://bit.ly/1k8msFr Plans for this cabinet are available at http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com HERE'S WHAT I USED: http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ - Arcade Cabinet - Digital plans http://amzn.to/1NCVmAb - SawStop cabinet saw http://amzn.to/1LZGmJS - Skil circular saw http://amzn.to/1nAb7Q6 - Speed square http://amzn.to/1SP44ii - 54" Drywall T-Square http://amzn.to/1GMrfGL - Dewalt 20v drill driver combo http://amzn.to/1GMjjoW - Dewalt compound miter saw http://amzn.to/1WXMCJ4 - Dremel Tool http://amzn.to/1HdQuwD - Grizzly G0555LANV Bandsaw h...
published: 04 Feb 2016 -
My Arcade MAME Cabinet - UPDATED for 2017!
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room. LaunchBox front end: https://www.launchbox-app.com Computer Specs: Dell x8900-2506BLK Intel Quad Core i7-6700 3.4 GHz Processor 16 GB DDR4 RAM 1 TB HDD Storage Monitor: 19" ViewSonic VG930m Controller: X-Arcade Dual Joystick w/ USB FOLLOW US Twitter: http://twitter.com/MetalJesusRocks Facebook: http://facebook.com/MetalJesusRocks Site: http://www.MetalJesusRocks.com DMP: https://www.youtube.com/user/DrunkenMasterPaul BUY Metal Jesus T-shirts: http://shrsl.com/?~9quw Consider Supporting my Videos on Patreon: http://www.Patreon.com/MetalJesusRocks ** I was not paid for this video, but Launchbox did provide the computer and u...
published: 06 Jan 2017 -
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
Want a small arcade cabinet that's easy to make? Here you go! Subscribe to my channel: http://bit.ly/1k8msFr Second Channel: http://bit.ly/iltms-2 My Full Size Arcade Cabinet series: https://www.youtube.com/playlist?list=PLice_sU_6Rfhw7LK-tl8A8u1XYQKeuFri Setup 2nd player for iPac: https://www.reddit.com/r/RetroPie/comments/3hu2uy/2_player_ipac2_setup_for_retropie/ MORE PROJECTS, POSTS AND EVENTS http://www.iliketomakestuff.com TOOLS LIST: (some are better than the versions I own) http://amzn.to/2aCJYGu - SawStop cabinet saw http://amzn.to/2axFPsA - Skil circular saw http://amzn.to/2axOLvq - Dewalt 20v drill driver combo http://amzn.to/2dcJoTR - Countersink drill bits http://amzn.to/2akFubx - Orbital Sander http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo http://amzn.to/2axFR...
published: 24 Nov 2016 -
How to make a DIY Raspberry Pi Arcade Cabinet!
Like, subscribe, and comment below. This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3. This is a basic cabinet that doesn't use vinyl graphics, or T-molding. Those will be used in future builds. There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below! All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arcade-101.html More explanations and downloadable packages! Instagram https://www.instagram.com/we_build_stuff/ Recalbox: https://www.recalbox.com Raspberry Pi operating system - donate to them! One of my favorite eBay stores: http://stores.ebay.com/sinoarcade ...
published: 14 Oct 2016 -
How to make an Arcade Machine: Part 1
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be able to play all of the old school retro arcade games including PacMan and Galaga! In part two of this video we will cover installing all of the electronics into the arcade cabinet, including the use of MAME (Mega Arcade Multi Emulator) and the Maximus Arcade front-end on a Windows 8 PC. This arcade machine cabinet is custom made from MDF. We drill all of the holes for the joystick and buttons, along with slots for the coin door! In part three of the series we will install the lighted marquee and graphics. Plans will be available shortly: http://www.thegeekpub.com/2505/how-to-make-an-arcade-machine-part-1/ Watch Part 2: https:...
published: 26 Jul 2015 -
Ultimate Arcade Cabinet - The Easy Budget Build
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it can go in anyone's home and is very simple for us to start off on. We will be updating this in the future adding more extras and upgrading. But for now, this is the minimum of what you want to be looking at. HERE IS THE KIT I AM USING IN THIS PART: CONTACT RICH FOR 10% OFF BY SAYING MY NAME! https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts Parts lists for everything I used down the bottom! Complete cabinet builds from start to finish with all links, tips, guides and where to get them from, including links and downloads! Complete programing and software guides. Tech and wiring, control setups, where t...
published: 30 Jun 2016 -
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts. UPDATED version of my other video * fixed audio *added links to files I am no expert at sketchup or photoshop, as a result these files are not perfect but I believe they can be of much help in your own build. In this link you will be able to view and download the following: * 4 pages in PDF detailing measurements. (slightly different shape under controll panel from final build) *Editable photoshop files for Marquee and control panel. control panel dimensions are to exact scale for standard buttons. *Google Schetchup file https://drive.google.com/folderview?id=0B8hrIa1o1TNZQWRTZ3dtVlAxdU0&usp;=sharing
published: 10 Jan 2015 -
Building a full size mame arcade cabinet start to finish
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in others. I'll post the real time video later so you can follow along
published: 05 Feb 2017 -
-
How to build an Arcade Cabinet
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade cabinet. The main goal of our project was to play a handful of our favorite indie games from Steam, so we knew that we would need a little more kick than a Raspberry Pi could provide, as well as a full version of Windows if we wanted complete compatibility. Our second goal was to make sure the whole system could be booted up by anyone who wanted to play without a lot of time or effort, which requires more than tweaking a few settings in Windows. Finally, we wanted a system that could be self-contained, but that could also hook up to a spare projector or TV if desired. Since the games we wanted to play were the highest barrier o...
published: 23 May 2015
Arcade Cabinet build - Part 1 // How-To
- Order: Reorder
- Duration: 12:18
- Updated: 04 Feb 2016
- views: 443912
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi!
Subscribe to my channel: http://bit.ly/1k8msFr
Plans for this cabinet a...
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi!
Subscribe to my channel: http://bit.ly/1k8msFr
Plans for this cabinet are available at http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
HERE'S WHAT I USED:
http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ - Arcade Cabinet - Digital plans
http://amzn.to/1NCVmAb - SawStop cabinet saw
http://amzn.to/1LZGmJS - Skil circular saw
http://amzn.to/1nAb7Q6 - Speed square
http://amzn.to/1SP44ii - 54" Drywall T-Square
http://amzn.to/1GMrfGL - Dewalt 20v drill driver combo
http://amzn.to/1GMjjoW - Dewalt compound miter saw
http://amzn.to/1WXMCJ4 - Dremel Tool
http://amzn.to/1HdQuwD - Grizzly G0555LANV Bandsaw
http://amzn.to/1GyGjbg - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/1GMpZn3 - Kreg Rip Cut (circular saw guide)
http://amzn.to/1GyGp2v - Kreg R3 pocket hole jig
http://amzn.to/1WjF7Q4 - clamp
http://amzn.to/1nzWRXs - 1/2" Overlay Face Frame concealed hinges
http://amzn.to/1nzX3Gb - 48" Piano Hinge
http://amzn.to/1nAbj1O - 11" Digital Protractor
http://amzn.to/1nAbs5g - Digital Angle gauge
http://amzn.to/1WXMM2Z - Classic steel ruler (cork back)
http://amzn.to/1WXNjlo - 24" Soft-close drawer slides
http://amzn.to/1nAbzOh - 27" LCD Monitor
http://www.inventables.com?ref=iltms - X-Carve
http://amzn.to/20fPAeN - Silhouette Portrait (vinyl cutter)
http://amzn.to/1WXN368 - 3" Speaker grilles
http://amzn.to/1WXN89P - Logitech computer speakers
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, PENCILS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
It's been a L-O-N-G time coming (probably longer than you know) but I'm so happy to finally present part 1 of my arcade cabinet build! In case you haven't seen it, be sure to watch my older video all about setting up the Raspberry Pi (using RetroPie) and the controls. If you've got that system all up and running, putting it in something is the next step! I've been working on the plans for this system for a long time, rethinking them over and over to include all of the stuff I wanted my cabinet to have. This was especially important to me, since my wife gave me the OK for this to go in our living room. In my mind, that means that it HAD to be as practical as possible (even though it's completely impractical by nature.)
The biggest difference in my cabinet and the vintage cabinets, is the fact that the modern electronics can literally fit in your pocket, so the majority of the cabinet is empty. I wanted to take advantage of that with my design...
I decided to keep all of the electronics in/around the controls and monitor. This left the area below the controls, and behind the monitor open, so I made them into storage. Underneath the controls is a simple bookshelf with two doors. Behind the monitor was harder to get to, so I designed the cabinet so that one side panel could actually swing open, revealing six drawers, each 24" deep. Being able to swing open the side panel COMPLETELY changed the structure, in comparison to most cabinets, but I totally think it was worthwhile. Second channel: bit.ly/iltms-2
https://wn.com/Arcade_Cabinet_Build_Part_1_How_To
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi!
Subscribe to my channel: http://bit.ly/1k8msFr
Plans for this cabinet are available at http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
HERE'S WHAT I USED:
http://www.iliketomakestuff.com/product/arcade-cabinet-digital-plan/ - Arcade Cabinet - Digital plans
http://amzn.to/1NCVmAb - SawStop cabinet saw
http://amzn.to/1LZGmJS - Skil circular saw
http://amzn.to/1nAb7Q6 - Speed square
http://amzn.to/1SP44ii - 54" Drywall T-Square
http://amzn.to/1GMrfGL - Dewalt 20v drill driver combo
http://amzn.to/1GMjjoW - Dewalt compound miter saw
http://amzn.to/1WXMCJ4 - Dremel Tool
http://amzn.to/1HdQuwD - Grizzly G0555LANV Bandsaw
http://amzn.to/1GyGjbg - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/1GMpZn3 - Kreg Rip Cut (circular saw guide)
http://amzn.to/1GyGp2v - Kreg R3 pocket hole jig
http://amzn.to/1WjF7Q4 - clamp
http://amzn.to/1nzWRXs - 1/2" Overlay Face Frame concealed hinges
http://amzn.to/1nzX3Gb - 48" Piano Hinge
http://amzn.to/1nAbj1O - 11" Digital Protractor
http://amzn.to/1nAbs5g - Digital Angle gauge
http://amzn.to/1WXMM2Z - Classic steel ruler (cork back)
http://amzn.to/1WXNjlo - 24" Soft-close drawer slides
http://amzn.to/1nAbzOh - 27" LCD Monitor
http://www.inventables.com?ref=iltms - X-Carve
http://amzn.to/20fPAeN - Silhouette Portrait (vinyl cutter)
http://amzn.to/1WXN368 - 3" Speaker grilles
http://amzn.to/1WXN89P - Logitech computer speakers
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, PENCILS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
It's been a L-O-N-G time coming (probably longer than you know) but I'm so happy to finally present part 1 of my arcade cabinet build! In case you haven't seen it, be sure to watch my older video all about setting up the Raspberry Pi (using RetroPie) and the controls. If you've got that system all up and running, putting it in something is the next step! I've been working on the plans for this system for a long time, rethinking them over and over to include all of the stuff I wanted my cabinet to have. This was especially important to me, since my wife gave me the OK for this to go in our living room. In my mind, that means that it HAD to be as practical as possible (even though it's completely impractical by nature.)
The biggest difference in my cabinet and the vintage cabinets, is the fact that the modern electronics can literally fit in your pocket, so the majority of the cabinet is empty. I wanted to take advantage of that with my design...
I decided to keep all of the electronics in/around the controls and monitor. This left the area below the controls, and behind the monitor open, so I made them into storage. Underneath the controls is a simple bookshelf with two doors. Behind the monitor was harder to get to, so I designed the cabinet so that one side panel could actually swing open, revealing six drawers, each 24" deep. Being able to swing open the side panel COMPLETELY changed the structure, in comparison to most cabinets, but I totally think it was worthwhile. Second channel: bit.ly/iltms-2
- published: 04 Feb 2016
- views: 443912
My Arcade MAME Cabinet - UPDATED for 2017!
- Order: Reorder
- Duration: 7:45
- Updated: 06 Jan 2017
- views: 70720
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room.
...
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room.
LaunchBox front end: https://www.launchbox-app.com
Computer Specs:
Dell x8900-2506BLK
Intel Quad Core i7-6700 3.4 GHz Processor
16 GB DDR4 RAM
1 TB HDD Storage
Monitor: 19" ViewSonic VG930m
Controller: X-Arcade Dual Joystick w/ USB
FOLLOW US
Twitter: http://twitter.com/MetalJesusRocks
Facebook: http://facebook.com/MetalJesusRocks
Site: http://www.MetalJesusRocks.com
DMP: https://www.youtube.com/user/DrunkenMasterPaul
BUY Metal Jesus T-shirts: http://shrsl.com/?~9quw
Consider Supporting my Videos on Patreon:
http://www.Patreon.com/MetalJesusRocks
** I was not paid for this video, but Launchbox did provide the computer and upgraded software license for the review. The opinions of the software are my own.
https://wn.com/My_Arcade_Mame_Cabinet_Updated_For_2017
We upgraded the computer, software, joystick controller and monitor plus other physical aspects of our standup MAME arcade emulator cabinet for the game room.
LaunchBox front end: https://www.launchbox-app.com
Computer Specs:
Dell x8900-2506BLK
Intel Quad Core i7-6700 3.4 GHz Processor
16 GB DDR4 RAM
1 TB HDD Storage
Monitor: 19" ViewSonic VG930m
Controller: X-Arcade Dual Joystick w/ USB
FOLLOW US
Twitter: http://twitter.com/MetalJesusRocks
Facebook: http://facebook.com/MetalJesusRocks
Site: http://www.MetalJesusRocks.com
DMP: https://www.youtube.com/user/DrunkenMasterPaul
BUY Metal Jesus T-shirts: http://shrsl.com/?~9quw
Consider Supporting my Videos on Patreon:
http://www.Patreon.com/MetalJesusRocks
** I was not paid for this video, but Launchbox did provide the computer and upgraded software license for the review. The opinions of the software are my own.
- published: 06 Jan 2017
- views: 70720
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
- Order: Reorder
- Duration: 9:57
- Updated: 24 Nov 2016
- views: 17901
Want a small arcade cabinet that's easy to make? Here you go!
Subscribe to my channel: http://bit.ly/1k8msFr
Second Channel: http://bit.ly/iltms-2
My Full Size...
Want a small arcade cabinet that's easy to make? Here you go!
Subscribe to my channel: http://bit.ly/1k8msFr
Second Channel: http://bit.ly/iltms-2
My Full Size Arcade Cabinet series: https://www.youtube.com/playlist?list=PLice_sU_6Rfhw7LK-tl8A8u1XYQKeuFri
Setup 2nd player for iPac:
https://www.reddit.com/r/RetroPie/comments/3hu2uy/2_player_ipac2_setup_for_retropie/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
TOOLS LIST:
(some are better than the versions I own)
http://amzn.to/2aCJYGu - SawStop cabinet saw
http://amzn.to/2axFPsA - Skil circular saw
http://amzn.to/2axOLvq - Dewalt 20v drill driver combo
http://amzn.to/2dcJoTR - Countersink drill bits
http://amzn.to/2akFubx - Orbital Sander
http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo
http://amzn.to/2axFRRs - Jigsaw
http://amzn.to/2axPah6 - Grizzly 14" Bandsaw
http://amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/2axGlH9 - Kreg Rip Cut (circular saw guide)
http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter
http://amzn.to/2akFN6c - 2HP Dust Collector
http://amzn.to/2axPmNA - 1 Micron bag
http://amzn.to/2aD7DGO - 11" Digital protractor
http://amzn.to/2ay8MSs - Digital Angle Gauge
http://amzn.to/2akGcWk - Classic steel ruler (cork backed)
http://amzn.to/2ay9XRX - CA Glue (medium)
http://amzn.to/2ay9T4v - CA Activator
http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
http://www.ebay.com/itm/110934669362?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT - Arcade buttons
http://www.ebay.com/itm/ZIPPY-Classic-Competition-Style-2-4-8-way-Arcade-Game-Joystick-Arcade-MAME-JAMMA-/131974095274?hash=item1eba44e1aa - Joystick (Zippy style)
http://amzn.to/2gwLuk6 - Computer speakers
http://amzn.to/2axieIm - Raspberry Pi 3
hhttp://amzn.to/2aAxSQS - Multimeter
http://amzn.to/2anW7yq - Wire
http://amzn.to/2awMqgO - jumpers (Male to Female)
http://www.ultimarc.com/store/section.php?xSec=2 - iPac 2
http://amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones)
http://amzn.to/2gb6IQ2 - Wire connecters
https://www.t-molding.com/1-2in-orange-t-molding.html - T-Molding (1/2" x 20ft.)
http://amzn.to/2giSRc3 - Slotting cutter
http://amzn.to/2gdoYsq - Arbor
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://www.twitch.tv/iliketomakestuff
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
https://wn.com/Bar_Top_Arcade_Cabinet_With_A_Raspberry_Pi_(From_A_Single_Sheet_Of_Plywood)_How_To
Want a small arcade cabinet that's easy to make? Here you go!
Subscribe to my channel: http://bit.ly/1k8msFr
Second Channel: http://bit.ly/iltms-2
My Full Size Arcade Cabinet series: https://www.youtube.com/playlist?list=PLice_sU_6Rfhw7LK-tl8A8u1XYQKeuFri
Setup 2nd player for iPac:
https://www.reddit.com/r/RetroPie/comments/3hu2uy/2_player_ipac2_setup_for_retropie/
MORE PROJECTS, POSTS AND EVENTS
http://www.iliketomakestuff.com
TOOLS LIST:
(some are better than the versions I own)
http://amzn.to/2aCJYGu - SawStop cabinet saw
http://amzn.to/2axFPsA - Skil circular saw
http://amzn.to/2axOLvq - Dewalt 20v drill driver combo
http://amzn.to/2dcJoTR - Countersink drill bits
http://amzn.to/2akFubx - Orbital Sander
http://amzn.to/2aCJP5O - Pancake compressor/nail gun combo
http://amzn.to/2axFRRs - Jigsaw
http://amzn.to/2axPah6 - Grizzly 14" Bandsaw
http://amzn.to/2aCK6pu - Grizzly Drill Press (WAAAAY overpriced (3x) on Amazon, buy from Grizzly directly.)
http://amzn.to/2axGlH9 - Kreg Rip Cut (circular saw guide)
http://amzn.to/2awLSaO - Shop Fox Hanging Air Filter
http://amzn.to/2akFN6c - 2HP Dust Collector
http://amzn.to/2axPmNA - 1 Micron bag
http://amzn.to/2aD7DGO - 11" Digital protractor
http://amzn.to/2ay8MSs - Digital Angle Gauge
http://amzn.to/2akGcWk - Classic steel ruler (cork backed)
http://amzn.to/2ay9XRX - CA Glue (medium)
http://amzn.to/2ay9T4v - CA Activator
http://amzn.to/2axPtbL - Silhouette Portrait (vinyl cutter)
http://www.ebay.com/itm/110934669362?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT - Arcade buttons
http://www.ebay.com/itm/ZIPPY-Classic-Competition-Style-2-4-8-way-Arcade-Game-Joystick-Arcade-MAME-JAMMA-/131974095274?hash=item1eba44e1aa - Joystick (Zippy style)
http://amzn.to/2gwLuk6 - Computer speakers
http://amzn.to/2axieIm - Raspberry Pi 3
hhttp://amzn.to/2aAxSQS - Multimeter
http://amzn.to/2anW7yq - Wire
http://amzn.to/2awMqgO - jumpers (Male to Female)
http://www.ultimarc.com/store/section.php?xSec=2 - iPac 2
http://amzn.to/2aXbVud - Wire strippers (not the ones I have, but good ones)
http://amzn.to/2gb6IQ2 - Wire connecters
https://www.t-molding.com/1-2in-orange-t-molding.html - T-Molding (1/2" x 20ft.)
http://amzn.to/2giSRc3 - Slotting cutter
http://amzn.to/2gdoYsq - Arbor
Want to support ILTMS? Get early viewing, exclusive content and more...
http://www.iliketomakestuff.com/patreon
BUY A SHIRT, STICKER, DIGITAL PLANS and MORE!!
http://www.iliketomakestuff.com/store
FOLLOW:
http://twitter.com/iliketomakestuf
http://www.twitch.tv/iliketomakestuff
http://instagram.com/iliketomakestuff
http://facebook.com/iltms
- published: 24 Nov 2016
- views: 17901
How to make a DIY Raspberry Pi Arcade Cabinet!
- Order: Reorder
- Duration: 20:15
- Updated: 14 Oct 2016
- views: 3799
Like, subscribe, and comment below.
This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 an...
Like, subscribe, and comment below.
This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3.
This is a basic cabinet that doesn't use vinyl graphics, or T-molding. Those will be used in future builds.
There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below!
All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arcade-101.html
More explanations and downloadable packages!
Instagram https://www.instagram.com/we_build_stuff/
Recalbox: https://www.recalbox.com
Raspberry Pi operating system - donate to them!
One of my favorite eBay stores: http://stores.ebay.com/sinoarcade
joystick and button sets for $60-$100
My Local suppliers
http://www.rpelectronics.com/
http://leeselectronic.com/en/
Original Cabinet design by http://www.instructables.com/member/rolfebox/
Music:
I dunno by grapes (c) copyright 2008 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/16626 Ft: J Lang, Morusque
another one by grapes (c) copyright 2009 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/19168
https://wn.com/How_To_Make_A_Diy_Raspberry_Pi_Arcade_Cabinet
Like, subscribe, and comment below.
This build log follows the arcade cabinet build including wiring and assembly using an MDF cabinet and a Raspberry Pi 2 and 3.
This is a basic cabinet that doesn't use vinyl graphics, or T-molding. Those will be used in future builds.
There is still much to be improved with these builds. These are a starter project that still leave much to be customized. If you have cool ideas please let me know in the comments below!
All the plans can be downloaded from: http://holbrooktech.weebly.com/pi-arcade-101.html
More explanations and downloadable packages!
Instagram https://www.instagram.com/we_build_stuff/
Recalbox: https://www.recalbox.com
Raspberry Pi operating system - donate to them!
One of my favorite eBay stores: http://stores.ebay.com/sinoarcade
joystick and button sets for $60-$100
My Local suppliers
http://www.rpelectronics.com/
http://leeselectronic.com/en/
Original Cabinet design by http://www.instructables.com/member/rolfebox/
Music:
I dunno by grapes (c) copyright 2008 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/16626 Ft: J Lang, Morusque
another one by grapes (c) copyright 2009 Licensed under a Creative Commons Attribution (3.0) license. http://dig.ccmixter.org/files/grapes/19168
- published: 14 Oct 2016
- views: 3799
How to make an Arcade Machine: Part 1
- Order: Reorder
- Duration: 6:05
- Updated: 26 Jul 2015
- views: 76791
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be a...
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be able to play all of the old school retro arcade games including PacMan and Galaga!
In part two of this video we will cover installing all of the electronics into the arcade cabinet, including the use of MAME (Mega Arcade Multi Emulator) and the Maximus Arcade front-end on a Windows 8 PC.
This arcade machine cabinet is custom made from MDF. We drill all of the holes for the joystick and buttons, along with slots for the coin door! In part three of the series we will install the lighted marquee and graphics.
Plans will be available shortly:
http://www.thegeekpub.com/2505/how-to-make-an-arcade-machine-part-1/
Watch Part 2: https://www.youtube.com/watch?v=xIWwMtdzOH0
Find us on Social Media:
Facebook: facebook.com/TheGeekPub
Instagram: instagram.com/TheGeekPub
https://wn.com/How_To_Make_An_Arcade_Machine_Part_1
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the process of building the arcade cabinet. Using this machine you will be able to play all of the old school retro arcade games including PacMan and Galaga!
In part two of this video we will cover installing all of the electronics into the arcade cabinet, including the use of MAME (Mega Arcade Multi Emulator) and the Maximus Arcade front-end on a Windows 8 PC.
This arcade machine cabinet is custom made from MDF. We drill all of the holes for the joystick and buttons, along with slots for the coin door! In part three of the series we will install the lighted marquee and graphics.
Plans will be available shortly:
http://www.thegeekpub.com/2505/how-to-make-an-arcade-machine-part-1/
Watch Part 2: https://www.youtube.com/watch?v=xIWwMtdzOH0
Find us on Social Media:
Facebook: facebook.com/TheGeekPub
Instagram: instagram.com/TheGeekPub
- published: 26 Jul 2015
- views: 76791
Ultimate Arcade Cabinet - The Easy Budget Build
- Order: Reorder
- Duration: 45:51
- Updated: 30 Jun 2016
- views: 46264
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it...
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it can go in anyone's home and is very simple for us to start off on.
We will be updating this in the future adding more extras and upgrading. But for now, this is the minimum of what you want to be looking at.
HERE IS THE KIT I AM USING IN THIS PART: CONTACT RICH FOR 10% OFF BY SAYING MY NAME!
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
Parts lists for everything I used down the bottom!
Complete cabinet builds from start to finish with all links, tips, guides and where to get them from, including links and downloads!
Complete programing and software guides. Tech and wiring, control setups, where to buy and who to avoid. Making this the go to source of information on all the parts you need and where to get them.
If anyone has any bad experiences from sellers or from parts, let me know. Lets not just show who and where to buy, but who and what to avoid. There are lots of great laces out there, but as always, people trying to make quick bucks selling tat!
These arcade builds will be split into logical builds, parts, features and systems. If you would like something featured, please PM me and lets see if it will suit the builders. If anyone has any requests for this type of series or are struggling on something, let me know in the comments.
I want to cover all the things you want or need, so if you have any ideas LET ME KNOW!
Please share this and let others know!
MY TOP 10 EMULATORS! (FULLY WORKING EMULATORS!)
https://www.youtube.com/watch?v=zs-VSiHgXDk
HAPPY GAMING!
NEW!!!! THE SIMPLY AUSTIN STEAM GROUP - LETS GET GAMING TOGETHER GUYS!
http://steamcommunity.com/groups/SimplyAustin
If you would like a new video covering anything you have in mind or have any issues let me know in the comments bellow :D
--------------------------------------------------------------------------------------------------------
------------------------------------ MY SET OF LINKS -------------------------------------
--------------------------------------------------------------------------------------------------------
Please subscribe to my channel, I try to release everything you need to get setup for your gaming pleasures, plus more home made treats :)
MY NEW TWITCH CHANNEL, MAKE SURE YOU FOLLOW AND SUB
http://www.twitch.tv/simply_austin
HERE IS THE FACEBOOK LINK
https://www.facebook.com/simplyaustins
TO FIND OUT ABOUT EARLY RELEASES OF MY FEATURES
https://twitter.com/SimplyAustins
MY WEBSITE:
www.simplyaustin.tv
DONATIONS TOWARDS MAKING MORE VIDS LIKE THIS
PAYPAL = austin585@gmail.com
---------------------------------------------------------------------------
------------ PARTS USED IN THIS BUILD! ----------------
---------------------------------------------------------------------------
BARTOP ARCADE ISELF WITH EXTRAS:
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
10% OFF EVERYTHING WHEN YOU SAY MY NAME!
Use this link for:
- Bartop Parts
- Plexi Glass and Marquee
- Artwork for cab. Templates and Custom in Price!
Cheaper with discount or MDF Option!
SPEAKERS:
https://www.amazon.co.uk/gp/product/B00JRW0M32/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc;=1
MONITOR:
Sourced from E-Bay. You want a DELL 1908FE 19" Monitor 4:3 (Cost me £7.50 for used battered one)
SCREWS FOR MONITOR:
https://www.amazon.co.uk/gp/product/B00DY296HY/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc;=1
HINGES:
https://www.amazon.co.uk/gp/product/B012TCIDPK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc;=1
PVC TRIM:
https://www.amazon.co.uk/gp/product/B00DPKWKYG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc;=1
You need 2 of these to do Marquee and the Monitor Section
I will be adding more parts here for the future parts to this a I find a reliable seller who can ship worldwide. However included in the £300 is the control set I am using, its the :
Xin-Mo board with 2x Zippy sticks and 19 buttons.
Keep tabs on this for future if you want to follow the same setup as we start setting all this up!
Also in Future:
Pi3
PC Build
More Cabs
More Art
More guides and more fun!
LET ME KNOW IF YOU WANT YOUR PRODUCTS FEATURED!!!
CREDITS:
MUSIC:
Ocean Robocop 3 Remix
OC REMIX Sega CD OST music
Ocean Robocop Remix (Sorry I stail cant find the maker of the Tune)
GAMEPLAY:
Various Arcade titles
SFVIntro Trailer at start
MENTIONS:
Rich @ Rich's Bartop Arcade for kicking this series off with one of his builds!
Drunken Punk 800 (For being a great help!)
https://www.youtube.com/user/JoeyDrunko
RocketLauncher Team
HyperSpin Team
LaunchBox Team
RetroFE Team
GameEX Team
Please, if I missed anyone who would like to be part of the credits, please let me know and I will add. I do not take credit for much of the gameplay used in this video and would not like to miss anyones credit due to the 3rd party usage here on YT!
https://wn.com/Ultimate_Arcade_Cabinet_The_Easy_Budget_Build
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part we are focussing on a easy to make high quality Bartop. This means it can go in anyone's home and is very simple for us to start off on.
We will be updating this in the future adding more extras and upgrading. But for now, this is the minimum of what you want to be looking at.
HERE IS THE KIT I AM USING IN THIS PART: CONTACT RICH FOR 10% OFF BY SAYING MY NAME!
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
Parts lists for everything I used down the bottom!
Complete cabinet builds from start to finish with all links, tips, guides and where to get them from, including links and downloads!
Complete programing and software guides. Tech and wiring, control setups, where to buy and who to avoid. Making this the go to source of information on all the parts you need and where to get them.
If anyone has any bad experiences from sellers or from parts, let me know. Lets not just show who and where to buy, but who and what to avoid. There are lots of great laces out there, but as always, people trying to make quick bucks selling tat!
These arcade builds will be split into logical builds, parts, features and systems. If you would like something featured, please PM me and lets see if it will suit the builders. If anyone has any requests for this type of series or are struggling on something, let me know in the comments.
I want to cover all the things you want or need, so if you have any ideas LET ME KNOW!
Please share this and let others know!
MY TOP 10 EMULATORS! (FULLY WORKING EMULATORS!)
https://www.youtube.com/watch?v=zs-VSiHgXDk
HAPPY GAMING!
NEW!!!! THE SIMPLY AUSTIN STEAM GROUP - LETS GET GAMING TOGETHER GUYS!
http://steamcommunity.com/groups/SimplyAustin
If you would like a new video covering anything you have in mind or have any issues let me know in the comments bellow :D
--------------------------------------------------------------------------------------------------------
------------------------------------ MY SET OF LINKS -------------------------------------
--------------------------------------------------------------------------------------------------------
Please subscribe to my channel, I try to release everything you need to get setup for your gaming pleasures, plus more home made treats :)
MY NEW TWITCH CHANNEL, MAKE SURE YOU FOLLOW AND SUB
http://www.twitch.tv/simply_austin
HERE IS THE FACEBOOK LINK
https://www.facebook.com/simplyaustins
TO FIND OUT ABOUT EARLY RELEASES OF MY FEATURES
https://twitter.com/SimplyAustins
MY WEBSITE:
www.simplyaustin.tv
DONATIONS TOWARDS MAKING MORE VIDS LIKE THIS
PAYPAL = austin585@gmail.com
---------------------------------------------------------------------------
------------ PARTS USED IN THIS BUILD! ----------------
---------------------------------------------------------------------------
BARTOP ARCADE ISELF WITH EXTRAS:
https://www.facebook.com/Richs-Bartop-Arcades-339050949489263/?fref=ts
10% OFF EVERYTHING WHEN YOU SAY MY NAME!
Use this link for:
- Bartop Parts
- Plexi Glass and Marquee
- Artwork for cab. Templates and Custom in Price!
Cheaper with discount or MDF Option!
SPEAKERS:
https://www.amazon.co.uk/gp/product/B00JRW0M32/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc;=1
MONITOR:
Sourced from E-Bay. You want a DELL 1908FE 19" Monitor 4:3 (Cost me £7.50 for used battered one)
SCREWS FOR MONITOR:
https://www.amazon.co.uk/gp/product/B00DY296HY/ref=oh_aui_detailpage_o06_s01?ie=UTF8&psc;=1
HINGES:
https://www.amazon.co.uk/gp/product/B012TCIDPK/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc;=1
PVC TRIM:
https://www.amazon.co.uk/gp/product/B00DPKWKYG/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc;=1
You need 2 of these to do Marquee and the Monitor Section
I will be adding more parts here for the future parts to this a I find a reliable seller who can ship worldwide. However included in the £300 is the control set I am using, its the :
Xin-Mo board with 2x Zippy sticks and 19 buttons.
Keep tabs on this for future if you want to follow the same setup as we start setting all this up!
Also in Future:
Pi3
PC Build
More Cabs
More Art
More guides and more fun!
LET ME KNOW IF YOU WANT YOUR PRODUCTS FEATURED!!!
CREDITS:
MUSIC:
Ocean Robocop 3 Remix
OC REMIX Sega CD OST music
Ocean Robocop Remix (Sorry I stail cant find the maker of the Tune)
GAMEPLAY:
Various Arcade titles
SFVIntro Trailer at start
MENTIONS:
Rich @ Rich's Bartop Arcade for kicking this series off with one of his builds!
Drunken Punk 800 (For being a great help!)
https://www.youtube.com/user/JoeyDrunko
RocketLauncher Team
HyperSpin Team
LaunchBox Team
RetroFE Team
GameEX Team
Please, if I missed anyone who would like to be part of the credits, please let me know and I will add. I do not take credit for much of the gameplay used in this video and would not like to miss anyones credit due to the 3rd party usage here on YT!
- published: 30 Jun 2016
- views: 46264
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
- Order: Reorder
- Duration: 6:31
- Updated: 10 Jan 2015
- views: 86660
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts.
UPDATED version of my oth...
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts.
UPDATED version of my other video
* fixed audio
*added links to files
I am no expert at sketchup or photoshop, as a result these files are not perfect but I believe they can be of much help in your own build. In this link you will be able to view and download the following:
* 4 pages in PDF detailing measurements. (slightly different shape under controll panel from final build)
*Editable photoshop files for Marquee and control panel. control panel dimensions are to exact scale for standard buttons.
*Google Schetchup file
https://drive.google.com/folderview?id=0B8hrIa1o1TNZQWRTZ3dtVlAxdU0&usp;=sharing
https://wn.com/Custom_Hyperspin_Arcade_Cabinet_Updated_With_Links_To_Plans
This is short video showing how I went about building a custom Hyperspin arcade cabinet. This is not a tutorial but a recap of sorts.
UPDATED version of my other video
* fixed audio
*added links to files
I am no expert at sketchup or photoshop, as a result these files are not perfect but I believe they can be of much help in your own build. In this link you will be able to view and download the following:
* 4 pages in PDF detailing measurements. (slightly different shape under controll panel from final build)
*Editable photoshop files for Marquee and control panel. control panel dimensions are to exact scale for standard buttons.
*Google Schetchup file
https://drive.google.com/folderview?id=0B8hrIa1o1TNZQWRTZ3dtVlAxdU0&usp;=sharing
- published: 10 Jan 2015
- views: 86660
Building a full size mame arcade cabinet start to finish
- Order: Reorder
- Duration: 15:24
- Updated: 05 Feb 2017
- views: 986
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in...
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in others.
I'll post the real time video later so you can follow along
https://wn.com/Building_A_Full_Size_Mame_Arcade_Cabinet_Start_To_Finish
So i was wondering how fast i could build a cabinet if i stopped fecking around most of the day, 4 hours apparently. this is sped up 12x in some parts and 8x in others.
I'll post the real time video later so you can follow along
- published: 05 Feb 2017
- views: 986
World's BEST Arcade Machine!
- Order: Reorder
- Duration: 21:39
- Updated: 20 May 2016
- views: 84713
http://www.tinyarcademachines.com
Facebook - https://www.facebook.com/CrazyBadCuber
5% Discount Code at the cubicle - crazybadcuber
http://www.tinyarcademachines.com
Facebook - https://www.facebook.com/CrazyBadCuber
5% Discount Code at the cubicle - crazybadcuber
https://wn.com/World's_Best_Arcade_Machine
How to build an Arcade Cabinet
- Order: Reorder
- Duration: 4:14
- Updated: 23 May 2015
- views: 31351
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade ...
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade cabinet.
The main goal of our project was to play a handful of our favorite indie games from Steam, so we knew that we would need a little more kick than a Raspberry Pi could provide, as well as a full version of Windows if we wanted complete compatibility.
Our second goal was to make sure the whole system could be booted up by anyone who wanted to play without a lot of time or effort, which requires more than tweaking a few settings in Windows.
Finally, we wanted a system that could be self-contained, but that could also hook up to a spare projector or TV if desired.
Since the games we wanted to play were the highest barrier of entry, we started there. The games we had in mind were titles like Nidhogg, TowerFall Ascension, Samurai Gunn, Divekick, and OlliOlli. They're all great indie games that are easy to pick up, with only a few buttons each, and high replay value.
The retro aesthetic has been popular lately, so these games have relatively low system requirements. We evaluated the highest requirements for each game, and discovered we needed at least two gigabytes of RAM, a processor clocked at 1.4GHz or higher, and integrated graphics supporting DirectX 9.
SUBSCRIBE FOR THE LATEST VIDEOS
http://www.youtube.com/subscription_center?add_user=DigitalTrends
VISIT DIGITAL TRENDS
http://www.digitaltrends.com/
CHECK OUT OUR LATEST PODCAST
http://www.digitaltrends.com/podcasts/
https://www.facebook.com/digitaltrendsftw
https://twitter.com/digitaltrends
https://plus.google.com/+digitaltrends/posts
https://wn.com/How_To_Build_An_Arcade_Cabinet
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is how we took an Intel NUC and made it the heart of a table-top arcade cabinet.
The main goal of our project was to play a handful of our favorite indie games from Steam, so we knew that we would need a little more kick than a Raspberry Pi could provide, as well as a full version of Windows if we wanted complete compatibility.
Our second goal was to make sure the whole system could be booted up by anyone who wanted to play without a lot of time or effort, which requires more than tweaking a few settings in Windows.
Finally, we wanted a system that could be self-contained, but that could also hook up to a spare projector or TV if desired.
Since the games we wanted to play were the highest barrier of entry, we started there. The games we had in mind were titles like Nidhogg, TowerFall Ascension, Samurai Gunn, Divekick, and OlliOlli. They're all great indie games that are easy to pick up, with only a few buttons each, and high replay value.
The retro aesthetic has been popular lately, so these games have relatively low system requirements. We evaluated the highest requirements for each game, and discovered we needed at least two gigabytes of RAM, a processor clocked at 1.4GHz or higher, and integrated graphics supporting DirectX 9.
SUBSCRIBE FOR THE LATEST VIDEOS
http://www.youtube.com/subscription_center?add_user=DigitalTrends
VISIT DIGITAL TRENDS
http://www.digitaltrends.com/
CHECK OUT OUR LATEST PODCAST
http://www.digitaltrends.com/podcasts/
https://www.facebook.com/digitaltrendsftw
https://twitter.com/digitaltrends
https://plus.google.com/+digitaltrends/posts
- published: 23 May 2015
- views: 31351
back
fullscreen slideshow
- Playlist
- Chat
back
fullscreen slideshow
- Playlist
- Chat
12:18
Arcade Cabinet build - Part 1 // How-To
Check out how I made my own custom arcade cabinet to run retro games on a Raspberry Pi!
Su...
published: 04 Feb 2016
Arcade Cabinet build - Part 1 // How-To
Arcade Cabinet build - Part 1 // How-To
- Report rights infringement
- published: 04 Feb 2016
- views: 443912
7:45
My Arcade MAME Cabinet - UPDATED for 2017!
We upgraded the computer, software, joystick controller and monitor plus other physical as...
published: 06 Jan 2017
My Arcade MAME Cabinet - UPDATED for 2017!
My Arcade MAME Cabinet - UPDATED for 2017!
- Report rights infringement
- published: 06 Jan 2017
- views: 70720
9:57
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
Want a small arcade cabinet that's easy to make? Here you go!
Subscribe to my channel: htt...
published: 24 Nov 2016
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
Bar Top Arcade Cabinet with a Raspberry Pi (from a single sheet of plywood)// How-To
- Report rights infringement
- published: 24 Nov 2016
- views: 17901
20:15
How to make a DIY Raspberry Pi Arcade Cabinet!
Like, subscribe, and comment below.
This build log follows the arcade cabinet build incl...
published: 14 Oct 2016
How to make a DIY Raspberry Pi Arcade Cabinet!
How to make a DIY Raspberry Pi Arcade Cabinet!
- Report rights infringement
- published: 14 Oct 2016
- views: 3799
6:05
How to make an Arcade Machine: Part 1
In part one of How to make an Arcade Machine, Mike from The Geek Pub walks through the pro...
published: 26 Jul 2015
How to make an Arcade Machine: Part 1
How to make an Arcade Machine: Part 1
- Report rights infringement
- published: 26 Jul 2015
- views: 76791
45:51
Ultimate Arcade Cabinet - The Easy Budget Build
Here is Part one of my New Series: HOW TO BUILD THE ULTIMATE ARCADE MACHINE! In this part ...
published: 30 Jun 2016
Ultimate Arcade Cabinet - The Easy Budget Build
Ultimate Arcade Cabinet - The Easy Budget Build
- Report rights infringement
- published: 30 Jun 2016
- views: 46264
6:31
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
This is short video showing how I went about building a custom Hyperspin arcade cabinet. T...
published: 10 Jan 2015
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS TO PLANS
- Report rights infringement
- published: 10 Jan 2015
- views: 86660
15:24
Building a full size mame arcade cabinet start to finish
So i was wondering how fast i could build a cabinet if i stopped fecking around most of th...
published: 05 Feb 2017
Building a full size mame arcade cabinet start to finish
Building a full size mame arcade cabinet start to finish
- Report rights infringement
- published: 05 Feb 2017
- views: 986
21:39
World's BEST Arcade Machine!
http://www.tinyarcademachines.com
Facebook - https://www.facebook.com/CrazyBadCuber
5% D...
published: 20 May 2016
World's BEST Arcade Machine!
World's BEST Arcade Machine!
- Report rights infringement
- published: 20 May 2016
- views: 84713
4:14
How to build an Arcade Cabinet
Arcade gaming complete with buttons and joysticks can be a do it yourself project. This is...
published: 23 May 2015
How to build an Arcade Cabinet
How to build an Arcade Cabinet
- Report rights infringement
- published: 23 May 2015
- views: 31351
Arcade Cabinet build - Part 1 // How-To...
My Arcade MAME Cabinet - UPDATED for 2017!...
Bar Top Arcade Cabinet with a Raspberry Pi (from a...
How to make a DIY Raspberry Pi Arcade Cabinet!...
How to make an Arcade Machine: Part 1...
Ultimate Arcade Cabinet - The Easy Budget Build...
Custom Hyperspin Arcade Cabinet UPDATED WITH LINKS...
Building a full size mame arcade cabinet start to ...
World's BEST Arcade Machine!...
How to build an Arcade Cabinet...
See more photos of arcade cabinet
back
US show of force to North Korea also could show US weakness
Edit Atlanta Journal 12 Apr 2017
WASHINGTON. Upping the stakes in its slow-burning confrontation with North Korea, the Trump administration deployed an aircraft carrier to the region this week in a show of force that also could expose American weakness. If the North proceeds with a ballistic missile or nuclear test and the U.S. does nothing in response, America's deterrence will appear diminished ... Another potential date. An April 25 celebration of its armed forces ... U.S ... ....
back
North Korea warns of nuclear strike if provoked; Trump 'armada' steams on
Edit Deccan Chronicle 12 Apr 2017
Pyongyang. North Korean state media warned on Tuesday of a nuclear attack on the United States at any sign of American aggression, as a US Navy strike group steamed toward the western Pacific - a force US President Donald Trump described as an "armada" ... "We are sending an armada. Very powerful," Trump told Fox Business Network. "We have submarines. Very powerful. Far more powerful than the aircraft carrier ... ....
back
Angry Husband Fills Wife's Car With Cement. Video Goes Viral
Edit NDTV 12 Apr 2017
Hell hath no fury like a woman or man scorned. A bizarre video from Russia shows a man filling his wife's car with cement after she apparently changed her surname to win a prize at a local... ....
back
United CEO Apologizes For 'Horrific Event,' Promises Full Review Of Policies
Edit WorldNews.com 11 Apr 2017
The firestorm swirling around the violent dragging of a man from his seat on a United Airlines flight Sunday night continued Tuesday as the carrier’s chief executive announced an internal investigation would be launched and the airline went into full spin mode as conflicting corporate statements, falling stocks and swelling outrage struck the airline, The Washington Post reported ... I’m not getting off the flight,’” Bridges said....
back
Russia ready to grant access to Syria airbase for ‘gas attack’ probe: Defense official
Edit Press TV 12 Apr 2017
Russia has said it is ready to provide access to inspectors to a Syrian airbase that the opponents of the Syrian government say was used to carry out a “chemical attack.”. At least 86 people died in the town of Khan Sheikhoun in Syria last week in what was claimed to be a chemical attack conducted by the Syrian government ... Moreover, the Syrian army does not have any,” he said ... (Photo by AFP) ....
Review: Drop Not! review - A one-touch arcade game that gets a bit one-note
Edit Pocket Gamer 12 Apr 2017Charming Runes is the latest action puzzler from Shooty Skies developer Mighty Games
Edit Pocket Gamer 12 Apr 2017
For lovers of Disney Crossy Road and Shooty Skies , Mighty Games has you covered for another addictive arcade adventure - Charming Runes , out now on iOS and Android. Charming Runes is an action-puzzler in which you help guide Birby the canary to mine runes with your magical, bouncing pickaxe ... But, you've got to shoot wisely as each block has its own health and you can't let the procession reach the bottom. [read more] ......
Time-bending shmup Sine Mora receives its biggest discount since launch
Edit Pocket Gamer 12 Apr 2017
Ported from PC and consoles in 2013, Sine Mora is a challenging time-based bullet-hell shooter, complete with massive bosses and massive amounts of bullets, and it's currently available for 99p / 99c on the App Store . Between a story campaign, arcade modes, and boss practice, you weave between screen-filling bullet patterns and waves of enemy ships, flying three different ships of your own ... You can purchase it on iPad and iPhone ... ....
Yukio Kanao Named General Manager of Imperial Hotel, Tokyo
Edit Market Watch 12 Apr 2017
TOKYO, April 12, 2017 /PRNewswire/ -- Japan's 127 year-old Imperial Hotel, Ltd ... Photo. ... It initiated many new services and facilities which have since become standard services for major Japanese hotels, such as all-inclusive Shinto and Christian wedding services, shopping arcades, and in-house laundry service, and introduced diverse Western cuisine to the Japanese public ... SOURCE Imperial Hotel, Ltd....
Old Time Hockey is like EA NHL’s beer-league cousin
Edit Venture Beat 12 Apr 2017
For the first time in 25 years, my Detroit Red Wings are not in the NHL playoffs. It’s weird, and it’s making it difficult for me to enjoy the hockey league’s official video game from Electronic Arts ... It’s a bit more sluggish and slow ... When you boot up and see the 1970s-style intro, the arena organ music, and the retro visuals, you’re probably expecting a game that plays more like an arcade experience ... ....
Mission at new mosque in Dearborn Hts.: ‘Islam for all’
Edit Detroit news 12 Apr 2017
Hundreds of people attended the first Friday prayers at the mosque last week ... Among them. monthly interfaith seminars for non-Muslims, a social work outreach to those suffering from problems such as drug addiction and domestic violence, a youth speakers bureau to fulfill growing community requests, a Middle Eastern gift shop and numerous educational programs for youth as well as an arcade in the basement for kids ... “Islam is not a cult ... ....
How American protest music evolved from Civil War refrains to viral Trump videos
Edit Vox 12 Apr 2017
From call and response and “Yankee Doodle” to Beyoncé and Father John Misty ... But his third album, released on Friday, pushes it to another level ... Far from it ... Protest music ... American protest music 1.0 ... James E ... S. Hall, C ... In the same vein, Arcade Fire and Mavis Staples released “I Give You Power” on the eve of Trump’s inauguration, a throbbing track about the give and take of authority, with all proceeds from its purchase going to the ACLU....
Blocky Castle is a brightly coloured arcade game, coming to iOS and Android this Thursday
Edit Pocket Gamer 11 Apr 2017
Just how determined are you to get to the top of a winding tower? Well, when Blocky Castle launches later this week you'll probably find out. Blocky Castle is a colourful pick up and play arcade game where you've got to get as high as you can without falling. Sure, it sounds simple enough, but having been designed by an architect that may have skipped a health and safety meeting or two, it won't be that easy ... ....
Old Time Hockey misses the mark on what makes arcade sports games last
Edit Polygon 11 Apr 2017
But it’ll make you laugh Arcade sports games are basically dead these days, which is one of the main reasons V7 Entertainment made Old Time Hockey ... Unfortunately, Old Time Hockey isn’t as fun to play as its arcade sports forebears ... But there’s something timeless about the best arcade sports titles ... Playing Old Time Hockey does feel like going back to the glory days of arcade sports video games....
Destroy Wurst Zombies and Hipster Giants in Lichtspeer, out now on PlayStation Vita
Edit Pocket Gamer 11 Apr 2017
It's been a while but the glorious neon arcade game Lichtspeer is out at last on PlayStation Vita. Lichtspeer is an action arcade game based in an ancient Germanic ......
- 1
- 2
- 3
- 4
- 5
- Next page »
