- published: 14 Feb 2012
- views: 9946
RCS may refer to:
Super Smash Bros. for Nintendo 3DS and Super Smash Bros. for Wii U are fighting video games developed by Sora Ltd. and Bandai Namco Games, with assistance from tri-Crescendo, and published by Nintendo for the Nintendo 3DS and Wii U game consoles. Despite being similarly titled games, even with almost similar content, the two titles are officially considered the fourth and fifth installments, respectively, in the Super Smash Bros. series of games by creator and game director Masahiro Sakurai.
Like the rest of the series, Super Smash Bros. for Nintendo 3DS and Super Smash Bros. for Wii U are non-traditional fighting games where players use different attacks to weaken their opponents and knock them out of an arena. The games are crossover titles that feature characters, items, music, and stages from various Nintendo franchises, including Mario, Donkey Kong, Pokémon, Fire Emblem, Kirby, Metroid, Star Fox, The Legend of Zelda and Kid Icarus, as well as from several third-party franchises, including Sega's Sonic the Hedgehog, Capcom's Mega Man and Street Fighter, Bandai Namco's Pac-Man, Square-Enix's Final Fantasy, and PlatinumGames'/Sega's Bayonetta. New features include having up to eight players fighting at a time on the Wii U, support for Amiibo, using Miis as fighters, post-release downloadable content including new fighters and stages, and customizable special moves unlockable for every non-DLC character. Some older features were removed, such as the story mode in the predecessor game Brawl.
Direct current (DC) is the unidirectional flow of electric charge. Direct current is produced by sources such as batteries, power supplies, thermocouples, solar cells, or dynamos. Direct current may flow in a conductor such as a wire, but can also flow through semiconductors, insulators, or even through a vacuum as in electron or ion beams. The electric current flows in a constant direction, distinguishing it from alternating current (AC). A term formerly used for this type of current was galvanic current.
The abbreviations AC and DC are often used to mean simply alternating and direct, as when they modify current or voltage.
Direct current may be obtained from an alternating current supply by use of a rectifier, which contains electronic elements (usually) or electromechanical elements (historically) that allow current to flow only in one direction. Direct current may be converted into alternating current with an inverter or a motor-generator set.
Direct current is used to charge batteries and as power supply for electronic systems. Very large quantities of direct-current power are used in production of aluminum and other electrochemical processes. It is also used for some railways, especially in urban areas. High-voltage direct current is used to transmit large amounts of power from remote generation sites or to interconnect alternating current power grids.
I recently purchased a ham radio tower and it had a remote coax switch mounted to it. It is the Ameritron RCS-4 Coax Switch which is a remote relay coax switch. There is a control box down next to your transmitter and then the control box adds a DC voltage to the coax along with your signal from your radio. The DC voltage lets the relays know which antenna you have selected. I wanted to open it up to make sure there was no corrosion or lightning damage inside of it before I tested SWR across the bands. So I took a video. Enjoy!
I thought this was a good product from mfj and thought i would share it with you , save money on not running multiple coax cables for hf - 6 meters
I recently purchased a ham radio tower and it had a remote coax switch mounted to it. It is the Ameritron RCS-4 Coax Switch which is a remote relay coax switch. There is a control box down next to your transmitter and then the control box adds a DC voltage to the coax along with your signal from your radio. The DC voltage lets the relays know which antenna you have selected. I wanted to test the SWR across the different ham frequencies to check the function of the switch and to see if it could be used for 6 meters or 50MHz. On Ameritron's website they state that the switch is good for use between 1.8 and 30MHz. 1.8 MHz - 18 MHz = 1.0-1.1 SWR 21 MHz - 28 MHz = 1.1 - 1.2 SWR 50 MHz = 1.1 - 1.2 SWR 144MHz = 2.0 - 2.2 SWR In my opinion I think this would be a great switch to use on all ban...
The idea is to force a position depending on the band selected on the transceiver to avoid any transmission with an antenna not tuned for the choosen band. Description here: http://f8dql.radioamateur.org/index.php/2014/05/15/automatisation-ameritron-rcs-4/
Railway City Smash is a weekly Super Smash Bros. for Wii U tournament with various side events that occurs in St. Thomas, Ontario every Saturday. If you have any interest in going to or participating in the tournament join our Facebook group by using the link below, we would love to have you! https://www.facebook.com/groups/656517414544327/
Railway City Smash is a weekly Super Smash Bros. for Wii U tournament with various side events that occurs in St. Thomas, Ontario every Saturday. If you have any interest in going to or participating in the tournament join our Facebook group by using the link below, we would love to have you! https://www.facebook.com/groups/656517414544327/
Instructions on setting the cams, how and why they work.